| Amount | Description | Package | Part | URL |
|---|---|---|---|---|
| 2 | Capacitor 10 pF | C1206 | C3, C4 | Reichelt |
| 3 | Capacitor 100 nF | C1206 | C1, C5, C6 | Reichelt |
| 1 | Capacitor 1000 uF / 16 V | E5-8.5 | C2 | Reichelt |
| 4 | Resistor 100 Ohm | R1206 | R6, R7, R8, R9 | Reichelt |
| 1 | Resistor 1 kOhm | R1206 | R4 | Reichelt |
| 1 | Resistor 1.2 kOhm | R1206 | R2 | Reichelt |
| 1 | Resistor 10 kOhm | R1206 | R3 | Reichelt |
| 1 | Resistor 100 kOhm | R1206 | R1 | Reichelt |
| 1 | Resistor 8.2 MOhm | R1206 | R5 | Reichelt |
| 1 | Harting connector | ML10 | CON1 | Reichelt |
| 1 | ESD suppressor CDSOD323-T05C | SOD-323 | D1 | Conrad, Farnell |
| 1 | Micro fuse block, 4A slow | OMNI-BLOK | F1 | Reichelt, Farnell |
| 1 | ESP32-DEVKIT V1 | - | ESP32-DEVKITV1 | Ebay |
| 1 | N-channel mosfet BSS138 | SOT23 | Q1 | Reichelt, Farnell |
| 1 | 32.768 kHz crystal | TC26V | Q2 | Reichelt, Farnell |
| 1 | P-channel mosfet STD26P3LLH6 | TO252 | U1 | Reichelt, Farnell |
| 6 | Wago clamp 2 | W237-102 | X1, X2, X3, X4, X5, X6 | Reichelt, Farnell |
| 1 | Wago clamp 1 | W237-103 | X2 | Reichelt |
| 1 | WS2812B 5050 8x32 RGB Flexible LED Panel Matrix | - | - | Ebay |
| 1 | Power supply 5 V / 5 A (4 A would be enough) | - | - | Reichelt |
| 1 | Power cable | - | - | Reichelt |
| 1 | Power supply plug | - | - | Reichelt |
Note, X2 is a composition of Wago clamp 1 and 2.
If you have further ideas or you found some bugs, great! Create a issue or if you are able and willing to fix it by yourself, clone the repository and create a pull request.
The whole source code is published under the MIT license. Consider the different licenses of the used third party libraries too!
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, shall be licensed as above, without any additional terms or conditions.