We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
import time import datetime import os import glob import sys
try: os.system('modprobe w1-gpio') os.system('modprobe w1-therm')
base_dir = '/sys/bus/w1/devices/' device_folder = glob.glob(base_dir + '28*')[0] device_file = device_folder + '/w1_slave'
def read_temp_raw(): f = open(device_file, 'r') lines = f.readlines() f.close() return lines
def read_temp(): lines = read_temp_raw() while lines[0].strip()[-3:] != 'YES': time.sleep(0.2) lines = read_temp_raw() equals_pos = lines[1].find('t=') if equals_pos != -1: temp_string = lines[1][equals_pos+2:] return float(temp_string) / 1000.0
while True: temp_c = read_temp() temp_f = temp_c * 9.0 / 5.0 + 32.0 print datetime.datetime.now(),"Current Temperature is: %.2f" %read_temp(),"C %.2f" %temp_f,"F" time.sleep(1) except: print '=================== error =================' finally: print '=================== stop ==================' sys.exit(1)
The text was updated successfully, but these errors were encountered:
No branches or pull requests
import time
import datetime
import os
import glob
import sys
try:
os.system('modprobe w1-gpio')
os.system('modprobe w1-therm')
base_dir = '/sys/bus/w1/devices/'
device_folder = glob.glob(base_dir + '28*')[0]
device_file = device_folder + '/w1_slave'
def read_temp_raw():
f = open(device_file, 'r')
lines = f.readlines()
f.close()
return lines
def read_temp():
lines = read_temp_raw()
while lines[0].strip()[-3:] != 'YES':
time.sleep(0.2)
lines = read_temp_raw()
equals_pos = lines[1].find('t=')
if equals_pos != -1:
temp_string = lines[1][equals_pos+2:]
return float(temp_string) / 1000.0
while True:
temp_c = read_temp()
temp_f = temp_c * 9.0 / 5.0 + 32.0
print datetime.datetime.now(),"Current Temperature is: %.2f" %read_temp(),"C %.2f" %temp_f,"F"
time.sleep(1)
except:
print '=================== error ================='
finally:
print '=================== stop =================='
sys.exit(1)
The text was updated successfully, but these errors were encountered: