You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
FPP V8.4.1 running on BBB
xlights 2024.19.1 AppImage linux
cape F16-B w/ 32 Outputs (8 Serial)
4 Channel DMX light
With E1.31 input from xlights to the serial output the DMX light is flickering. The same sequence as a file in FPP to the same output is working. From input to a different controller via output is working too. From xlights to the different controller also working.
FPP V8.4.1 running on BBB
xlights 2024.19.1 AppImage linux
cape F16-B w/ 32 Outputs (8 Serial)
4 Channel DMX light
With E1.31 input from xlights to the serial output the DMX light is flickering. The same sequence as a file in FPP to the same output is working. From input to a different controller via output is working too. From xlights to the different controller also working.
Steps to reproduce:
FPP:
Channel Outputs:
Serial Mode: DMX
Start Channel 1: 9000
Channel Inputs:
Enable Input
Active
Input Type: E1.31 - Unicast
FPP Channel Start: 1
(FPP Channel End: 10200)
Universe ': 1
Universe Count: 20
Universe Size: 510
Xlights:
Controller:
Ethernet
IP: from FPP
Protocol: E 131
Start Universe: 1
Universe Count: 20
Channels per Universe: 510
Layout:
Create: DmxGeneral
Channels: 4
Red Channel: 1
Green Channel: 2
Blue Channel: 3
White Channnel: 4
Controller: Use Start Channel
Indiv start Chans: select
String1: 9000
String1: 9001
String1: 9002
String1: 9003
Sequence see attached file
xlights.zip
The text was updated successfully, but these errors were encountered: