diff --git a/.README.md.un~ b/.README.md.un~
index e6b159a..ab8cf5e 100644
Binary files a/.README.md.un~ and b/.README.md.un~ differ
diff --git a/README.md b/README.md
index 30e5e64..374362a 100644
--- a/README.md
+++ b/README.md
@@ -1,7 +1,7 @@
# ESP32 Marauder — Cheap Yellow Display
- 
+ 
diff --git a/README.md~ b/README.md~
new file mode 100644
index 0000000..30e5e64
--- /dev/null
+++ b/README.md~
@@ -0,0 +1,127 @@
+# ESP32 Marauder — Cheap Yellow Display
+
+
+
+
+
+
+ 
+ 
+ 
+
+
+The aim of this project is to port the ESP32-Marauder firmware to the Cheap Yellow Display (CYD), offering powerful WiFi and Bluetooth testing features on an affordable and accessible hardware platform.
+
+---
+
+## 🏴☠️ Latest Update Highlights — v1.2.0 (12/15/24) 🏴☠️
+
+- Add support for Adafruit MAX17048 battery monitor
+- Update Save/Load Files menu to add for saving and loading AirTags
+- Add logging to SD for Flipper/AirTag sniff
+- Add Flipper Zero Sniff
+- Airtag Sniffing/Spoofing
+- Working Pwnagotchi Detect on all models
+- Flipper BLE Spam
+- Wardriving Menu added
+- Added compatibility for ESP32-2432S024R 2.4" Resistive Touch USB Type-C Only
+- Flash older Marauder firmware versions
+- [Guide for antenna modification](https://github.com/Fr4nkFletcher/ESP32-Marauder-Cheap-Yellow-Display/blob/master/AntennaModNew.md) using ESP-WROOM-32U with built-in IPEX/U.FL connector
+- [Evil Portal examples and setup](https://github.com/Fr4nkFletcher/ESP32-Marauder-Cheap-Yellow-Display/blob/master/evilportal/)
+- [How to add an external antenna](https://github.com/Fr4nkFletcher/ESP32-Marauder-Cheap-Yellow-Display/blob/master/AntennaMod.md)
+
+---
+
+## Requirements
+
+1. A compatible CYD module (see [Compatibility](#compatibility))
+2. Chrome browser
+3. Data-capable USB cable
+4. *(Optional)* GPS module for enhanced functionality
+
+---
+
+## Installation Steps
+
+### Web Flasher Method (Recommended)
+
+1. Go to the [CYM Web Flasher](https://fr4nkfletcher.github.io/Adafruit_WebSerial_ESPTool/)
+2. Click "Connect" and select your device
+3. Choose the appropriate Model and Version
+4. Click "Program" to start flashing
+
+
+ 
+
+
+#### Troubleshooting:
+
+If issues arise, try the following steps:
+
+1. Unplug and restart your CYD module
+2. Hold `RST`, tap `BOOT`, release `RST` (the screen should go blank)
+3. Refresh the Web Flasher page and click "Connect"
+4. If problems persist, hold `BOOT` while clicking "Connect"
+
+For further details, check out the [Web Flasher repository](https://github.com/Fr4nkFletcher/Adafruit_WebSerial_ESPTool).
+
+---
+
+### Manual Arduino IDE Method
+
+1. Set up your Arduino environment following the [ESP32 Marauder Arduino IDE Setup Guide](https://github.com/justcallmekoko/ESP32Marauder/wiki/arduino-ide-setup).
+2. Add the necessary libraries to your Arduino libraries folder.
+3. Set the upload speed to `115200` in the Arduino IDE (tested on version 1.8.19).
+4. Upload the firmware to your CYD module.
+
+For a step-by-step guide, refer to [Smoochiee's tutorial](https://github.com/smoochiee/MARAUDER-FOR-CYD---CHEAP-YELLOW-DISPLAY).
+
+---
+
+## Compatibility
+
+The project has been successfully tested on:
+
+- [Module 1](https://amazon.com/dp/B0BVFXR313)
+- [Module 2](https://amazon.com/dp/B0CLR7MQ91)
+- [Module 3](https://a.co/d/gWGoaP3)
+
+No hardware modifications are required, thanks to **@ggaljoen's** fork of the [TFT_eSPI](https://github.com/ggaljoen/TFT_eSPI) library.
+
+---
+
+## GPS Functionality
+
+GPS functionality is fully supported via the 4-pin connector near the MicroUSB port. For a list of compatible GPS hardware, refer to the [official wiki](https://github.com/justcallmekoko/ESP32Marauder/wiki/gps-modification).
+
+| GPS | -> | CYD |
+|-----|:--:|-----|
+| VCC | -> | VIN |
+| GND | -> | GND |
+| TX | -> | TX |
+| RX | -> | RX |
+
+Note: On 2.4" models swap RX/TX
+
+---
+
+## Example Usage
+
+After flashing, your CYD module will boot into the Marauder interface. Refer to the [ESP32 Marauder Wiki](https://github.com/justcallmekoko/ESP32Marauder/wiki) for detailed usage instructions.
+
+
+ 
+ 
+
+
+---
+
+## Acknowledgments
+
+A huge thanks to **@cod5fgzj**, [**smoochiee**](https://github.com/smoochiee), [**ggaljoen**](https://github.com/ggaljoen), and [**ATOMNFT**](https://github.com/ATOMNFT). And a special mention to [**JustCallMeKoko**](https://github.com/justcallmekoko) for their foundational work on the [ESP32Marauder](https://github.com/justcallmekoko/ESP32Marauder).
+
+---
+
+## Disclaimer
+
+This project is for educational purposes only. Always obtain proper authorization before testing on networks you don't own or have explicit permission to test. Don't be a dick!
diff --git a/img/readme.png b/img/readme0.png
similarity index 100%
rename from img/readme.png
rename to img/readme0.png