diff --git a/docs/devices/43076.md b/docs/devices/43076.md index ca453ad1babe3..3beea9e0393d1 100644 --- a/docs/devices/43076.md +++ b/docs/devices/43076.md @@ -23,7 +23,11 @@ pageClass: device-page +## Notes +# Device Not Responding + +Some Enbrighten devices will not respond to route update requests after a while. This can cause them to eventually not respond to commands, even though "last seen" will be recent. The only way to fix this is to reset the device by unplugging it or flipping power at the breaker. diff --git a/docs/devices/43078.md b/docs/devices/43078.md index 6802775db952f..e9f22ab11ef2b 100644 --- a/docs/devices/43078.md +++ b/docs/devices/43078.md @@ -23,7 +23,11 @@ pageClass: device-page +## Notes +# Device Not Responding + +Some Enbrighten devices will not respond to route update requests after a while. This can cause them to eventually not respond to commands, even though "last seen" will be recent. The only way to fix this is to reset the device by unplugging it or flipping power at the breaker. diff --git a/docs/devices/43080.md b/docs/devices/43080.md index 90e13c6eae60e..24ae47b8de1e0 100644 --- a/docs/devices/43080.md +++ b/docs/devices/43080.md @@ -34,6 +34,11 @@ To change the LED status indicator press the top of rocker 3 times and then the ### Pairing Factory reset the dimmer by pressing the top of the rocker 10 times quickly. + +# Device Not Responding + +Some Enbrighten devices will not respond to route update requests after a while. This can cause them to eventually not respond to commands, even though "last seen" will be recent. The only way to fix this is to reset the device by unplugging it or flipping power at the breaker. + diff --git a/docs/devices/43082.md b/docs/devices/43082.md index e20379b505b5e..3e6355a72d69a 100644 --- a/docs/devices/43082.md +++ b/docs/devices/43082.md @@ -37,6 +37,11 @@ Factory reset the dimmer by pressing the top of the rocker 10 times quickly. ### Binding This device does not support [binding](../guide/usage/binding.md) to groups. It does support binding to devices. + +# Device Not Responding + +Some Enbrighten devices will not respond to route update requests after a while. This can cause them to eventually not respond to commands, even though "last seen" will be recent. The only way to fix this is to reset the device by unplugging it or flipping power at the breaker. + diff --git a/docs/devices/43084.md b/docs/devices/43084.md index 1b8cdee56c1f8..64be9f6dde50a 100644 --- a/docs/devices/43084.md +++ b/docs/devices/43084.md @@ -23,7 +23,11 @@ pageClass: device-page +## Notes +# Device Not Responding + +Some Enbrighten devices will not respond to route update requests after a while. This can cause them to eventually not respond to commands, even though "last seen" will be recent. The only way to fix this is to reset the device by unplugging it or flipping power at the breaker. diff --git a/docs/devices/43090.md b/docs/devices/43090.md index c049c795338d9..1c2f5f6d7c6be 100644 --- a/docs/devices/43090.md +++ b/docs/devices/43090.md @@ -23,7 +23,11 @@ pageClass: device-page +## Notes +# Device Not Responding + +Some Enbrighten devices will not respond to route update requests after a while. This can cause them to eventually not respond to commands, even though "last seen" will be recent. The only way to fix this is to reset the device by unplugging it or flipping power at the breaker. diff --git a/docs/devices/43094.md b/docs/devices/43094.md index 80bf68472ea2a..4bb232a65ffb0 100644 --- a/docs/devices/43094.md +++ b/docs/devices/43094.md @@ -23,7 +23,11 @@ pageClass: device-page +## Notes +# Device Not Responding + +Some Enbrighten devices will not respond to route update requests after a while. This can cause them to eventually not respond to commands, even though "last seen" will be recent. The only way to fix this is to reset the device by unplugging it or flipping power at the breaker. diff --git a/docs/devices/43095.md b/docs/devices/43095.md index 0cc9d7158c133..0f48abe39b406 100644 --- a/docs/devices/43095.md +++ b/docs/devices/43095.md @@ -23,7 +23,11 @@ pageClass: device-page +## Notes +# Device Not Responding + +Some Enbrighten devices will not respond to route update requests after a while. This can cause them to eventually not respond to commands, even though "last seen" will be recent. The only way to fix this is to reset the device by unplugging it or flipping power at the breaker. diff --git a/docs/devices/43096.md b/docs/devices/43096.md index a4ce8aa127a80..55ea11edb0955 100644 --- a/docs/devices/43096.md +++ b/docs/devices/43096.md @@ -23,7 +23,11 @@ pageClass: device-page +## Notes +# Device Not Responding + +Some Enbrighten devices will not respond to route update requests after a while. This can cause them to eventually not respond to commands, even though "last seen" will be recent. The only way to fix this is to reset the device by unplugging it or flipping power at the breaker. diff --git a/docs/devices/43100.md b/docs/devices/43100.md index d313fc3059f24..3ebd83b9f5b97 100644 --- a/docs/devices/43100.md +++ b/docs/devices/43100.md @@ -33,6 +33,11 @@ pageClass: device-page 3. Plug the smart switch back into the outlet while holding down the push button. 4. Release button after the smart switch is plugged in. You must release button within four seconds of plugging in the switch. + +# Device Not Responding + +Some Enbrighten devices will not respond to route update requests after a while. This can cause them to eventually not respond to commands, even though "last seen" will be recent. The only way to fix this is to reset the device by unplugging it or flipping power at the breaker. + diff --git a/docs/devices/43102.md b/docs/devices/43102.md index 875bc1f3bbc70..31e2875187372 100644 --- a/docs/devices/43102.md +++ b/docs/devices/43102.md @@ -23,7 +23,11 @@ pageClass: device-page +## Notes +# Device Not Responding + +Some Enbrighten devices will not respond to route update requests after a while. This can cause them to eventually not respond to commands, even though "last seen" will be recent. The only way to fix this is to reset the device by unplugging it or flipping power at the breaker. diff --git a/docs/devices/43109.md b/docs/devices/43109.md index a08452595d9ee..c9d474178dde5 100644 --- a/docs/devices/43109.md +++ b/docs/devices/43109.md @@ -25,6 +25,11 @@ pageClass: device-page ## Notes A bulk order version of the Enbrighten 43076. + +# Device Not Responding + +Some Enbrighten devices will not respond to route update requests after a while. This can cause them to eventually not respond to commands, even though "last seen" will be recent. The only way to fix this is to reset the device by unplugging it or flipping power at the breaker. + diff --git a/docs/devices/43113.md b/docs/devices/43113.md index 319e5201e57ab..fe4e21ed8dd3e 100644 --- a/docs/devices/43113.md +++ b/docs/devices/43113.md @@ -34,6 +34,11 @@ To change the LED status indicator press the top of rocker 3 times and then the ### Pairing Factory reset the dimmer by pressing the top of the rocker 10 times quickly. + +# Device Not Responding + +Some Enbrighten devices will not respond to route update requests after a while. This can cause them to eventually not respond to commands, even though "last seen" will be recent. The only way to fix this is to reset the device by unplugging it or flipping power at the breaker. + diff --git a/docs/devices/43132.md b/docs/devices/43132.md index 73b2e937c8b32..5cc412872c03a 100644 --- a/docs/devices/43132.md +++ b/docs/devices/43132.md @@ -23,7 +23,11 @@ pageClass: device-page +## Notes +# Device Not Responding + +Some Enbrighten devices will not respond to route update requests after a while. This can cause them to eventually not respond to commands, even though "last seen" will be recent. The only way to fix this is to reset the device by unplugging it or flipping power at the breaker. diff --git a/docs/devices/ZB3102.md b/docs/devices/ZB3102.md index 68b82916bedd9..89661e3afcef7 100644 --- a/docs/devices/ZB3102.md +++ b/docs/devices/ZB3102.md @@ -23,7 +23,11 @@ pageClass: device-page +## Notes +# Device Not Responding + +Some Enbrighten devices will not respond to route update requests after a while. This can cause them to eventually not respond to commands, even though "last seen" will be recent. The only way to fix this is to reset the device by unplugging it or flipping power at the breaker.