Home

Welcome to the mlb-led-scoreboard wiki!

Bill of Materials (BOM)

Standard 32x32 Raspberry Pi 3 Build

Shortcut to Adafruit Part List

Shortcut to Amazon Idea List

1. Raspberry Pi 3
2. RGB LED Matrix Panel 32x32 (5mm Pitch)
3. Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit
4. CR1220 12mm diameter - 3V Lithium Coin Cell Battery
5. Brass M2.5 Standoffs for Pi HATs - Pack of 2
6. 8GB Class 10 SD/Micro SD Memory Card
7. 5V 4A (4000mA) switching power supply
8. Wireless Keyboard and Mouse Combo

Swap out LED Matrix Panel 32x32 with a 64x32 Panel

Build Instructions

1. Gather Materials
2. Follow Adafruit instructions for the LED RTC Pi HAT assembly
3. Assemble rest of hardware; use a HDMI cable, keyboard and mouse for easy access. "Headless" setup instructions might be posted later.
4. Prepare Raspberry Pi Operating System called "Raspbian"

• Insert SD Card with Micro SD card into port suitable with your computer.
• download etcher - helps to write Raspbian OS to Micro SD card
• download raspbian OS
• open etcher
• select raspbian OS as image to be written to micro SD card
• wait for operation to be over before ejecting card from computer
• insert ejected micro sd card into raspberry pi's micro sd card port

5. Be sure to check hardware setup and that micro sd card is securely in Raspberry Pi port before powering up.
6. git clone this repo
7. Experiment with repo options for best user experience

Helpful Tips:

• What's the difference in LED Pitch?

• Starting the scoreboard on startup

• Automatically restart the scoreboard every day