Display Questions

[XH-FPV]

I connected the radxa zero 3W to a monitor that uses RTD2775QT as the main control chip,It has no signal and does not display any picture,and the same is true when I connect the skyzone 04X, and the operation menu of the 04X will become stuttering. But when I use the same HDMI cable to connect to my TV, it works fine. Asking everyone for help on how to solve this problem.

[JohnDGodwin]

what are you setting in your screen-mode file?
Do the devices support that mode?

[XH-FPV]

您在屏幕模式文件中设置了什么？设备是否支持该模式？

Nothing was done. After flashing the firmware, connect the screen and plug it in, he doesn't show anything. However, using the same steps to connect the TV can show it.

[LoakAudio]

Hi, Sky04x are 1280x960 4/3 and 1280x720 16/9(you need to verify as I'm not home).
Default definition in openipc is 1080p iirc, so you need to write it in a config file of the Radxa.
Do you agree John ?

[XH-FPV]

嗨，Sky04x 是 1280x960 4/3 和 1280x720 16/9（你需要验证，因为我不在家）。 openipc 中的默认定义是 1080p iirc，因此您需要将其写入 Radxa 的配置文件中。你同意约翰吗？

I changed the screen_mode='' in the gs.conf folder, but it doesn't work, the problem is still there!

[LoakAudio]

gs.conf ? I think the file is a script called "screen-mode"
Have you followed the instructions of this page ?
Specially Step 4

[JohnDGodwin]

嗨，Sky04x 是 1280x960 4/3 和 1280x720 16/9（你需要验证，因为我不在家）。 openipc 中的默认定义是 1080p iirc，因此您需要将其写入 Radxa 的配置文件中。你同意约翰吗？

I changed the screen_mode='' in the gs.conf folder, but it doesn't work, the problem is still there!

Please try running the highest_framerate.sh script with the device you want to use plugged in.

[XH-FPV]

screen-mode

I've modified this file as well, but I don't know how to run the command from step 4

[XH-FPV]

嗨，Sky04x 是 1280x960 4/3 和 1280x720 16/9（你需要验证，因为我不在家）。openipc 中的默认定义是 1080p iirc，因此您需要将其写入 Radxa 的配置文件中。你同意约翰吗？

我更改了 gs.conf 文件夹中的 screen_mode=''，但它不起作用，问题仍然存在！

请尝试在插入要使用的设备的情况下运行 highest_framerate.sh 脚本。

Do you type in the "sudo nano /config/scripts/screen-modeWxH@fpssudo nano /config/scripts/dvr-fpssudo ./config/scripts/highest_framerate.shsudo ./config/scripts/highest_resolution.sh" command directly, and after typing it it pops up a window and I don't know how to operate it!

[JohnDGodwin]

You type sudo ./config/scripts/highest_framerate.sh and that's it. There should be no return, and it will autofill your screen-mode file with the highest framerate your display is capable of. You can see what it was changed to with sudo cat /config/scripts/screen-mode