Multipath and adjacent channel distortion indication

[SpiderBlocker]

Could multipath and adjacent channel distortion details be added similarly to above example of my car radio (which presumably also runs a TEF668x).

[PE5PVB]

It is possible, but I have no idea where to put it on the screen.

[SpiderBlocker]

Maybe something like so (MP => MultiPath, ACI => Adjacent Channel Interference):

From what I have seen, both MP and ACI each can report up to two digits.

[PE5PVB]

There are a few issues:

1. When signal is very high, it won't fit in the window
2. OFF (squelch) is translated in several languages and won't fit

[SpiderBlocker]

1. Considering the fact that worst case the first digit will be a "1", if you decrease the digit's font size just a little bit, it should still be feasible quite nicely:
   

2. Is it really necessary for something like "OFF" to be translated? Other screen labels aren't translated either, such as "MAN", "AUTO", "MEM", "AUTO BW" etc. Else you could perhaps follow the same method as used for those other labels by greying it out if disabled? Or even move SQ to the frequency window and give it the same appearance as the other labels.

[PE5PVB]

I found a way to add multipath.

[PE5PVB]

Added in 74c100c

[SpiderBlocker]

Now that you have removed the clock from the PTY window, may be the window divider could be shifted to the left by about 4 or 5 pixels, to accommodate for some extra width in the signal strength/quality window, so that you can position the signal strength and "dBµV" on the same line, as I proposed above. Also the forward slash in "C/N" could be removed. I would suggest to either use a colon ":" next to all labels or not at all. Now there's one next to "SQ" only. And I hope you'll be able to include ACI as well :-)