esp32-proxy-client.yaml

# ----------------------------------------------------------------------------------------------------
# ESPHome configuration - This part depends on your hardware target
# ----------------------------------------------------------------------------------------------------

esphome:
  name: solarrouter
  friendly_name: SolarRouter

esp32:
  board: esp32dev
  framework:
    type: arduino

# Enable logging
logger:
  baud_rate: 115200
  level: INFO
  logs:
    component: ERROR

# Enable Home Assistant API
api:
  encryption:
    key: !secret api_encryption_key

# Enable over-the-air updates
ota:
  - platform: esphome
    password: !secret solar_router_ota_password

# Enable improv serial
improv_serial:

# WiFi connection
wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  # If you have a WiFi activity plannification, you may have to update the reboot timeout (Default: 15min)
  reboot_timeout: 24h
  
# Activate web interface
web_server:
  port: 80

# ----------------------------------------------------------------------------------------------------
# Customisation
# ----------------------------------------------------------------------------------------------------

# This part of the script is designed to be use for customisation. It shouldn't be necessary to
# edit other part of the script to perform configuration.
substitutions:
  # Power meter source -----------------------------------------------------------
  # Define ip address of Proxy Power Meter
  power_meter_ip_address: "192.168.1.30"

  # Regulator --------------------------------------------------------------------
  regulator: "ac_dimmer"

  # Regulator configuration 
  # Define GPIO pin connected to AC Dimmer for gate and zero crossing detection.
  regulator_gate_pin: GPIO22
  regulator_zero_crossing_pin: GPIO23

  # LEDs -------------------------------------------------------------------------
  # Green LED is reflecting regulation status
  # Yellow LED is reflecting power meter status
  green_led_pin: GPIO19
  yellow_led_pin: GPIO18

packages:
  power_meter:
    url: https://github.com/XavierBerger/Solar-Router-for-ESPHome/
    file: solar_router/power_meter_proxy_client.yaml
    refresh: 1d
  regulator:
    url: https://github.com/XavierBerger/Solar-Router-for-ESPHome/
    file: solar_router/regulator_solid_state_relay.yaml
    refresh: 1d
  solar_router:
    url: https://github.com/XavierBerger/Solar-Router-for-ESPHome/
    file: solar_router/engine.yaml
    refresh: 1d