mac.yml

name: Mac-Build
on:
  push:
    branches:
      - main
  pull_request:
    branches:
      - main
    types: [opened, synchronize, reopened, ready_for_review]
env:
  # Customize the CMake build type here (Release, Debug, RelWithDebInfo, etc.)
  BUILD_TYPE: Release
  BUILD_FLAG: -fprofile-instr-generate -fcoverage-mapping
  ACCOUNT: chengcli

jobs:
  straka-2d:
    if: github.event.pull_request.draft == false
    runs-on: [self-hosted, macOS]
    steps:
      - uses: actions/checkout@v3
        with:
          lfs: false

      - name: set up python libraries
        run: pip3 install -r requirements.txt

      - name: check if artifact exists
        run: echo "ARTIFACT_EXISTS=$(./tools/check_artifact.sh straka_output.nc)" >> $GITHUB_ENV

      - uses: actions/download-artifact@v3
        if: env.ARTIFACT_EXISTS == 'true'
        with:
          name: straka_output.nc
          path: ${{github.workspace}}/examples/2019-Li-snap/

      - name: fetch the needed lfs file
        if: env.ARTIFACT_EXISTS == 'false'
        run: git lfs pull -I examples/2019-Li-snap/straka_output.nc

      - name: create build directory
        # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
        # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
        run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} -DTASK=straka

      - name: Build
        # Build your program with the given configuration
        run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} -- -j4

      - name: run simulation
        working-directory: ${{github.workspace}}/build/bin
        run: ./straka.release -i straka.inp

      - name: combile outputs
        working-directory: ${{github.workspace}}/build/bin
        run: ./combine.py -o test

      - name: compare result
        run: >
          ${{github.workspace}}/examples/2019-Li-snap/test_straka.py
          ${{github.workspace}}/build/bin/straka-test-main.nc
          ${{github.workspace}}/examples/2019-Li-snap/straka_output.nc

      - uses: actions/upload-artifact@v3
        if: env.ARTIFACT_EXISTS == 'false'
        with:
          name: straka_output.nc
          path: ${{github.workspace}}/examples/2019-Li-snap/straka_output.nc

  robert-2d:
    if: github.event.pull_request.draft == false
    runs-on: [self-hosted, macOS, ARM64]
    steps:
      - uses: actions/checkout@v3
        with:
          lfs: false

      - name: check if artifact exists
        run: echo "ARTIFACT_EXISTS=$(./tools/check_artifact.sh robert_output.nc)" >> $GITHUB_ENV
      - uses: actions/download-artifact@v3
        if: env.ARTIFACT_EXISTS == 'true'
        with:
          name: robert_output.nc
          path: ${{github.workspace}}/examples/2019-Li-snap/

      - name: fetch the needed lfs file
        if: env.ARTIFACT_EXISTS == 'false'
        run: git lfs pull -I examples/2019-Li-snap/robert_output.nc

      - name: create build directory
        # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
        # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
        run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} -DTASK=robert

      - name: Build
        # Build your program with the given configuration
        run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} -- -j4

      - name: run simulation
        working-directory: ${{github.workspace}}/build/bin
        run: mpiexec -n 8 ./robert.release -i robert2d.inp

      - name: combile outputs
        working-directory: ${{github.workspace}}/build/bin
        run: ./combine.py -o test

      - name: compare result
        run: >
          ${{github.workspace}}/examples/2019-Li-snap/test_robert.py
          ${{github.workspace}}/build/bin/robert-test-main.nc
          ${{github.workspace}}/examples/2019-Li-snap/robert_output.nc

      - uses: actions/upload-artifact@v3
        if: env.ARTIFACT_EXISTS == 'false'
        with:
          name: robert_output.nc
          path: ${{github.workspace}}/examples/2019-Li-snap/robert_output.nc

  robert-3d:
    if: github.event.pull_request.draft == false
    runs-on: [self-hosted, macOS, ARM64]
    steps:
      - uses: actions/checkout@v3
        with:
          lfs: false

      - name: check if artifact exists
        run: echo "ARTIFACT_EXISTS=$(./tools/check_artifact.sh robert3d_output.nc)" >> $GITHUB_ENV

      - uses: actions/download-artifact@v3
        if: env.ARTIFACT_EXISTS == 'true'
        with:
          name: robert3d_output.nc
          path: ${{github.workspace}}/examples/2019-Li-snap/

      - name: fetch the needed lfs file
        if: env.ARTIFACT_EXISTS == 'false'
        run: git lfs pull -I examples/2019-Li-snap/robert3d_output.nc

      - name: create build directory
        # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
        # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
        run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} -DTASK=robert

      - name: Build
        # Build your program with the given configuration
        run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} -- -j4

      - name: run simulation
        working-directory: ${{github.workspace}}/build/bin
        run: mpiexec -n 8 ./robert.release -i robert3d.inp

      - name: combile outputs
        working-directory: ${{github.workspace}}/build/bin
        run: ./combine.py -o test

      - name: compare result
        run: >
          ${{github.workspace}}/examples/2019-Li-snap/test_robert.py
          ${{github.workspace}}/build/bin/robert-test-main.nc
          ${{github.workspace}}/examples/2019-Li-snap/robert3d_output.nc

      - uses: actions/upload-artifact@v3
        if: env.ARTIFACT_EXISTS == 'false'
        with:
          name: robert3d_output.nc
          path: ${{github.workspace}}/examples/2019-Li-snap/robert3d_output.nc

  bryan-2d:
    if: github.event.pull_request.draft == false
    runs-on: [self-hosted, macOS, ARM64]
    needs: [straka-2d]
    steps:
      - uses: actions/checkout@v3
        with:
          lfs: false

      - name: check if artifact exists
        run: echo "ARTIFACT_EXISTS=$(./tools/check_artifact.sh bryan_output.nc)" >> $GITHUB_ENV

      - uses: actions/download-artifact@v3
        if: env.ARTIFACT_EXISTS == 'true'
        with:
          name: bryan_output.nc
          path: ${{github.workspace}}/examples/2019-Li-snap/

      - name: fetch the needed lfs file
        if: env.ARTIFACT_EXISTS == 'false'
        run: git lfs pull -I examples/2019-Li-snap/bryan_output.nc

      - name: create build directory
        # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
        # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
        run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} -DTASK=bryan

      - name: Build
        # Build your program with the given configuration
        run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} -- -j4

      - name: run simulation
        working-directory: ${{github.workspace}}/build/bin
        run: mpiexec -n 4 ./bryan.release -i bryan.inp

      - name: combile outputs
        working-directory: ${{github.workspace}}/build/bin
        run: ./combine.py -o test

      - name: compare result
        run: >
          ${{github.workspace}}/examples/2019-Li-snap/test_bryan.py
          ${{github.workspace}}/build/bin/bryan-test-main.nc
          ${{github.workspace}}/examples/2019-Li-snap/bryan_output.nc

      - uses: actions/upload-artifact@v3
        if: env.ARTIFACT_EXISTS == 'false'
        with:
          name: bryan_output.nc
          path: ${{github.workspace}}/examples/2019-Li-snap/bryan_output.nc

  shallow-xy:
    if: github.event.pull_request.draft == false
    runs-on: macos-12
    steps:
      - uses: actions/checkout@v3
        with:
          lfs: false

      - name: set up python libraries
        run: pip3 install -r requirements.txt

      - name: check if artifact exists
        run: echo "ARTIFACT_EXISTS=$(./tools/check_artifact.sh swxy_output.nc)" >> $GITHUB_ENV

      - uses: actions/download-artifact@v3
        if: env.ARTIFACT_EXISTS == 'true'
        with:
          name: swxy_output.nc
          path: ${{github.workspace}}/examples/2020-polar-vortex/

      - name: fetch the needed lfs file
        if: env.ARTIFACT_EXISTS == 'false'
        run: git lfs pull -I examples/2020-Li-polar-vortex/swxy_output.nc

      - name: set up libraries
        run: brew bundle

      - name: set up python libraries
        run: pip3 install -r requirements.txt

      - name: create build directory
        # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
        # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
        run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} -DCMAKE_Fortran_COMPILER=gfortran-12 -DNETCDF=ON -DTASK=vortex

      - name: Build
        # Build your program with the given configuration
        run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} -- -j3

      - name: run simulation
        working-directory: ${{github.workspace}}/build/bin
        run: mpiexec -n 4 ./shallow_xy.release -i shallow_water.inp

      - name: combile outputs
        working-directory: ${{github.workspace}}/build/bin
        run: ./combine.py -o test

      - name: compare result
        run: >
          python3 ${{github.workspace}}/examples/2020-Li-polar-vortex/test_shallow_xy.py
          ${{github.workspace}}/build/bin/sw-test-main.nc
          ${{github.workspace}}/examples/2020-Li-polar-vortex/swxy_output.nc

      - uses: actions/upload-artifact@v3
        if: env.ARTIFACT_EXISTS == 'false'
        with:
          name: swxy_output.nc
          path: ${{github.workspace}}/examples/2020-Li-polar-vortex/swxy_output.nc

  polar-vortex:
    if: github.event.pull_request.draft == false
    runs-on: [self-hosted, macOS, ARM64]
    steps:
      - uses: actions/checkout@v3
        with:
          lfs: false

      - name: check if artifact exists
        run: echo "ARTIFACT_EXISTS=$(./tools/check_artifact.sh intruder_output.nc)" >> $GITHUB_ENV

      - uses: actions/download-artifact@v3
        if: env.ARTIFACT_EXISTS == 'true'
        with:
          name: intruder_output.nc
          path: ${{github.workspace}}/examples/2020-Li-polar-vortex/

      - name: fetch the needed lfs file
        if: env.ARTIFACT_EXISTS == 'false'
        run: git lfs pull -I examples/2020-Li-polar-vortex/intruder_output.nc

      - name: set up libraries
        run: brew bundle

      - name: set up python libraries
        run: pip3 install -r requirements.txt

      - name: create build directory
        # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
        # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
        run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} -DCMAKE_Fortran_COMPILER=gfortran-14 -DTASK=vortex

      - name: Build
        # Build your program with the given configuration
        run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} -- -j3

      - name: run simulation
        working-directory: ${{github.workspace}}/build/bin
        run: mpiexec -n 3 ./polar_vortex.release -i fig_g_intruder.inp

      - name: combile outputs
        working-directory: ${{github.workspace}}/build/bin
        run: ./combine.py -o test

      - name: compare result
        run: >
          python3 ${{github.workspace}}/examples/2020-Li-polar-vortex/test_polar_vortex.py
          ${{github.workspace}}/build/bin/intruder-test-main.nc
          ${{github.workspace}}/examples/2020-Li-polar-vortex/intruder_output.nc

      - uses: actions/upload-artifact@v3
        if: env.ARTIFACT_EXISTS == 'false'
        with:
          name: intruder_output.nc
          path: ${{github.workspace}}/examples/2020-Li-polar-vortex/intruder_output.nc

  juno-mwr:
    if: github.event.pull_request.draft == false
    runs-on: macos-12
    steps:
      - uses: actions/checkout@v3
        with:
          lfs: false

      - name: set up libraries
        run: brew bundle

      - name: install python modules
        run: pip3 install -r requirements.txt

      - name: create build directory
        # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
        # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
        run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} -DCMAKE_Fortran_COMPILER=gfortran-12 -DTASK=juno

      - name: build
        # Build your program with the given configuration
        run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} -- -j2

      - name: run simulation
        working-directory: ${{github.workspace}}/build/bin
        run: ./juno_mwr.release -i juno_mwr.inp

      - name: combile outputs
        working-directory: ${{github.workspace}}/build/bin
        run: ./combine.py -o test

      - name: Test
        working-directory: ${{github.workspace}}/examples/2024-JHu-juno-mwr
        run: echo "cheers"

  cubed-blast:
    if: github.event.pull_request.draft == false
    runs-on: [self-hosted, macOS, ARM64]
    steps:
      - uses: actions/checkout@v3
        with:
          lfs: false

      - name: install python modules
        run: pip3 install -r requirements.txt

      - name: check if artifact exists
        run: echo "ARTIFACT_EXISTS=$(./tools/check_artifact.sh test_blast_output.nc)" >> $GITHUB_ENV

      - uses: actions/download-artifact@v3
        if: env.ARTIFACT_EXISTS == 'true'
        with:
          name: test_blast_output.nc
          path: ${{github.workspace}}/examples/2023-Chen-exo3/

      - name: fetch the needed lfs file
        if: env.ARTIFACT_EXISTS == 'false'
        run: git lfs pull -I examples/2023-Chen-exo3/test_blast_output.nc

      - name: set up libraries
        run: brew bundle

      - name: create build directory
        # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
        # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
        run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} -DNETCDF=ON -DTASK=exo2

      - name: Build
        # Build your program with the given configuration
        run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}} -- -j4

      - name: run simulation
        working-directory: ${{github.workspace}}/build/bin
        run: mpiexec -n 6 ./test_blast.release -i test_blast.inp

      - name: combile outputs
        working-directory: ${{github.workspace}}/build/bin
        run: python3 combine.py -o test

      - name: compare result
        run: >
          python3 ${{github.workspace}}/examples/2023-Chen-exo3/test_blast.py
          ${{github.workspace}}/build/bin/blast_48_cubed-test-main.nc
          ${{github.workspace}}/examples/2023-Chen-exo3/test_blast_output.nc

      - uses: actions/upload-artifact@v3
        if: env.ARTIFACT_EXISTS == 'false'
        with:
          name: swxy_output.nc
          path: ${{github.workspace}}/examples/2020-Li-polar-vortex/test_blast_output.nc