Skip to content

Latest commit

 

History

History
120 lines (85 loc) · 3.15 KB

ZRLMPI_protocol.md

File metadata and controls

120 lines (85 loc) · 3.15 KB

ZRLMPI protocol

IBM cloudFPGA MPI subset for network-attached FPGAS (ZRLMPI). Developed at the Zurich Research Laboratory (ZRL).

In the following, there is a brief description of the interfaces and protocols offered by the ZRLMPI library.

C/HLS calls

MPI_Send(
    void* data,
    int count,
    MPI_Datatype datatype,
    int destination,
    int tag,
    MPI_Comm communicator)
MPI_Recv(
    void* data,
    int count,
    MPI_Datatype datatype,
    int source,
    int tag,
    MPI_Comm communicator,
    MPI_Status* status)

MPE Interface

The Message Passing Engine in the FPGA

Version 0.9:

Since all MPI calls are always started by the user, there is only one MPI_Interface from the user's application wrapper to the MPE. There is MPI_data in both directions, of course.

entity MPI_Interface is 
  port(
    mpi_call  : out    std_logic_vector( 7 downto 0);
    count     : out    std_logic_vector(31 downto 0);
    rank      : out    std_logic_vector(31 downto 0)
  );
end MPI_Interface;

optional:

  tag  : in/out   std_logic_vector( 7 downto 0);

MPI_data is a Axis<8 > bus. ZRLMPI uses a bus width of 1 Byte in order to avoid alignment issues.

Custom Data Types

mpi_call definition:

mpi_call: uint8_t Name of Call
0 MPI_Send_INT
1 MPI_Recv_INT
2 MPI_Send_FLOAT
3 MPI_Recv_FLOAT
4 MPI_Barrier

packet_type definition:

packet_type: uint8_t Type
1 SEND_REQUEST
2 CLEAR_TO_SEND
3 DATA
4 ACK
5 ERROR

ZRLMPI-Header definition:

  • Each data stream send over network must have a header (also called Envelope)
  • inserted and removed by the MPE core
  • for easy detection: 0x96 at the beginning and end and a defined length
  • size and rank are represented in Little Endian
  • before each transmission -- send and receive -- a handshake takes place SEND_REQUEST --> CLEAR_TO_SEND --> SEND_DATA --> ACK_DATA
  • Handshake packets (SEND_REQUEST, CLEAR_TO_SEND, ACK, ERROR ) should have length=0 (ERROR may contain some bytes to name the type of the error)
Byte position Description
0 -- 3 0x96 0x96 0x96 0x96
4 -- 7 Destination rank
8 -- 11 Source rank
12 -- 15 Size in Words (excluding header)
16 type of call (see mpi_call)
17 type of packet (see packet_type)
18 (optional) Tag
19 -- 27 (reserved)
28 -- 31 0x96 0x96 0x96 0x96

Length: 32 Bytes

The size is given in 32-bit words, since only MPI_INT and MPI_FLOAT are supported as data type (yet).