README.md

APC Switched Rack PDU Control Panel

A PHP based Control Panel to control multiple APC Switched Rack PDUs via SNMPv3. A single panel to switch (on, off, restart) the attached devices between different states.

---

Content

• Requirements
• Quick Install
• PDU Configuration
  • Enable SNMPv3 on PDU
  • Choose profile from user profiles list
  • Setup SNMPv3 user profile
  • Choose profile from access control list
  • Enable SNMP user
• Script adaptation
  • Edit file
  • Add access data
  • Add additional PDU
  • Upload file
• Server Configuration
  • Check if PHP is installed
  • Check if PHP module php-snmp is installed
  • Firewall configuration
• Troubleshooting

---

Requirements

• Web server with PHP
• PHP module: php-snmp
• APC Switched Rack PDU(s) with enabled SNMPv3
  • Tested with APC Switched Rack PDU AP7920 and AP7921 on EOL firmware v3.9.2
  • Tested with APC Switched Rack PDU AP7920B on latest firmware v6.5.6
  • According to contributors, tested with APC AP8965 and APDU9965, which have 24 outputs per PDU.

---

Quick Install

No 🚀 science: Upload a single PHP file on a Webserver, enter the PDU IP address and the SNMPv3 access data with an editor and the script is ready for use.

---

This project is not affiliated with APC by Schneider Electric.
All mentioned trademarks are the property of their respective owners.