Задержка при прослушивании двух диапазонов.

[ua9sup]

В баофенге uv-5r прослушивание двойной частоты происходит без задержек,а на кваншенге uv-k5r плюс,задержка 4секунды примерно,что совсем неудобно. У меня домашний кросс бенд,стоит двух диапазонный трансивер и антенна на высоте 19 метров,общение 145.500 на 435.000 и обратно. Все было хорошо с баофенгом,пока в руки не попал кваншенг. Прошивки разные ставил,не помогает. Может кто сталкивался с такой проблемой?

[ErikS-web]

Please use English.

Google translate:
Delay when listening to two bands.
WOULD BE NICE TO ADD SSB TO THE DEMODU In the baofeng uv-5r, listening to the double frequency occurs without delay, but in the quangsheng uv-k5r plus, the delay is approximately 4 seconds, which is completely inconvenient. I have a home cross-band, there is a two-band transceiver and an antenna at an altitude of 19 meters, communication is 145,500 to 435,000 and back. Everything was fine with the baofeng until the quangsheng fell into my hands. I installed different firmware, it doesn’t help. Has anyone encountered this problem?

It that right... type uv-kR5 ?

What do you mean with "different firmware". Here we use and discuss release from EGZUMER.

[ErikS-web]

Please use English lanquage

[ua9sup]

Я его не знаю.

[ua9sup]

На Русский язык Вы не отвечаете?

[OE1MWW]

No, we use the english language in this Github

Нет, мы используем английский язык
Сформулируйте свою проблему и воспользуйтесь Google translate. Ваш первый запрос был непонятен.

[OE1MWW]

используйте translate.google.com для чтения

4 seconds delay ??? this is not possible in the UV-K5, because this would be 'store-and-forward'. The UV-K5 does not have any memory to store speech. Max. delay I have seen by SDR software is around 300 mSec. If it's 4 seconds (!) you have to check what you receive.

[ua9sup]

При переключении происходит задержка. С диапазона на диапазон,для работы в домашнем крос бенде. -- Отправлено из Mail.ru для Android пятница, 29 декабря 2023г., 16:57 +05:00 от OE1MWW ***@***.*** :

…

используйте translate.google.com для чтения 4 seconds delay ??? this is not possible in the UV-K5, because this would be 'store-and-forward'. The UV-K5 does not have any memory to store speech. Max. delay I have seen by SDR software is around 300 mSec. If it's 4 seconds (!) you have to check what you receive. — Reply to this email directly, view it on GitHub , or unsubscribe . You are receiving this because you authored the thread. Message ID: @ github . com>

[ua9sup]

При работе с баофенг uv-5r такого нет. Все переключается быстро. -- Отправлено из Mail.ru для Android пятница, 29 декабря 2023г., 16:57 +05:00 от OE1MWW ***@***.*** :

…

используйте translate.google.com для чтения 4 seconds delay ??? this is not possible in the UV-K5, because this would be 'store-and-forward'. The UV-K5 does not have any memory to store speech. Max. delay I have seen by SDR software is around 300 mSec. If it's 4 seconds (!) you have to check what you receive. — Reply to this email directly, view it on GitHub , or unsubscribe . You are receiving this because you authored the thread. Message ID: @ github . com>

[OE1MWW]

a.) we told you to use english
b.) your inital request is still not understandable
how is your setup connected ? what device is receiver, what device is transmitter ?
we don't care how high your antenna is. please stay with the relevant facts.

[ua9sup]

OK! -- Отправлено из Mail.ru для Android пятница, 29 декабря 2023г., 18:48 +05:00 от OE1MWW ***@***.*** :

…

a.) we told you to use english b.) your inital request is still not understandable how is your setup connected ? what device is receiver, what device is transmitter ? we don't care how high your antenna is. please stay with the relevant facts. — Reply to this email directly, view it on GitHub , or unsubscribe . You are receiving this because you authored the thread. Message ID: @ github . com>