Support for C100X firmware v2.0.12

[ctmayhew]

Do you think this would work with version 2.0.12 of the firmware for C100X16E available to download here?
https://www.homesystems-legrandgroup.com/home/-/productsheets/2595814

This is the non-Door Entry App version of the firmware which was included on all units purchased from mid 2023 onwards.

Thanks !

[ctmayhew]

Just sent a donation via PayPal. Thanks for your work on this project !

[fquinto]

Hello! Thanks for your support!! I just received your donation!!
I cannot assure you that this version is suitable for use on your C100X. In particular, I do not have the C100X version (I have the older C300X). For the moment I suggest waiting a little longer and securing to avoid possible terminal blockages. There have been some cases of terminal blocking (brick).

[maximushugus]

I can confirm that my C100X H+S came preinstalled with firmware v2.0.12 yesterday. For the moment I'll wait until a confirmation that I can use this mod.
Thanks for your work !

[fastcolors]

I got the same firmware, I see you have the link for it in firmware_versions.md.

would it work if i modify main.py in order to use that link ?

[fquinto]

Try! and cross fingers!

[msanchezt]

Same problem here. Got C100X with firmware v2.0 :/

[saberraz]

I would really appreciate if you could add support for firmware 2.x. I have this model and there is already a firmware version 2.x available on that page and also linked in firmware versions.

ps: I had already made a donation :)

[fquinto]

I really appreciate your donation but I only have the old version C300, not the new C100. Without the new one it is very very difficult to make any progress on my part. El vie, 22 nov 2024, 22:19, Sab ***@***.***> escribió:

…

I would really appreciate if you could add support for firmware 2.x. I have this model <https://www.homesystems-legrandgroup.com/it/home/-/productsheets/2595814> and there is already a firmware version 2.x available on that page and also linked in firmware versions <https://github.com/fquinto/bticinoClasse300x/blob/main/firmware_versions.md> . ps: I had already made a donation :) — Reply to this email directly, view it on GitHub <#29 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAM7X6H6IDV2YFJASEME5YD2B6NXFAVCNFSM6AAAAABDKWMSX2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDIOJUHAZTEMZXGQ> . You are receiving this because you commented.Message ID: ***@***.***>

[marcob79]

Supposing to have a c100x with firmware 2.x and ssh already enable, it can be useful to retrieve some information to implement the unlock procedure for 2.x?