diff --git a/BSB_LAN/json/lang_en.json b/BSB_LAN/json/lang_en.json index fee01491..ab6f05d0 100644 --- a/BSB_LAN/json/lang_en.json +++ b/BSB_LAN/json/lang_en.json @@ -266,7 +266,6 @@ "STR5050_TEXT": "Max dhw charging temp", "STR5055_TEXT": "Min recooling temperature for DHW storage tank", "STR5100_TEXT": "Min. pump speed for full charging of strat. tank", - "STR5020_TEXT": "Flow temp boost dhw", "STR5400_TEXT": "Setpoint for readiness temperature", "STR5430_TEXT": "Switch-on differential in DHW mode (sensor 1)", "STR5431_TEXT": "Min. switch-off differ. in DHW mode (sensor 1)", @@ -502,5 +501,2940 @@ "EXTIF_DOWNLOADCONF_TEXT": "Download config", "EXTIF_UPLOADCONF_TEXT": "Upload config to system", "EXTIF_DOWNLOADEXCL_TEXT": "Create and download exclusions list", - "EXTIF_ALLCAT_TEXT": "All categories" + "EXTIF_ALLCAT_TEXT": "All categories", + "UNIT_DAYS_TEXT": "Days", + "UNIT_HOUR_TEXT": "h", + "UNIT_MIN_TEXT": "min", + "UNIT_SEC_TEXT": "s", + "UNIT_DEG_TEXT": "°C", + "UNIT_PERC_TEXT": "%", + "UNIT_RPM_TEXT": "RPM", + "UNIT_KW_TEXT": "kW", + "UNIT_KWH_TEXT": "kWh", + "UNIT_KWHM3_TEXT": "kWh/m³", + "UNIT_CURR_TEXT": "µA", + "UNIT_BAR_TEXT": "bar", + "UNIT_VOLT_TEXT": "V", + "UNIT_GRADIENT_TEXT": "min/K", + "UNIT_GRADIENTKS_TEXT": "K/s", + "UNIT_INTEGRAL_TEXT": "Kmin", + "UNIT_TEMP_PER_MIN_TEXT": "°C/min", + "UNIT_CEL_MIN_TEXT": "°Cmin", + "UNIT_LITERPERHOUR_TEXT": "l/h", + "UNIT_LITERPERMIN_TEXT": "l/min", + "UNIT_GR_PER_CUBM_TEXT": "g/m³", + "UNIT_HPA_TEXT": "hPa", + "UNIT_METER_TEXT": "m", + "MENU_TEXT_OPEN": "Open", + "MENU_TEXT_CLOSE": "Closed", + "MENU_TEXT_LAT": "Log all bus telegrams", + "MENU_TEXT_UBT": "Log only unknown broadcast bus telegrams", + "MENU_TEXT_QRT": "Test device address", + "MENU_TEXT_UPT": "Uptime", + "MENU_TEXT_VER": "Version", + "CF_GATEWAY_TEXT": "Gateway", + "CF_DNS_TEXT": "DNS server", + "CF_WWWPORT_TEXT": "TCP port", + "CF_WIFI_SSID_TEXT": "WLAN SSID", + "CF_PASSKEY_TEXT": "URL passkey", + "CF_MQTT_USERNAME_TEXT": "Username", + "CF_MQTT_TOPIC_TEXT": "Topic prefix", + "CAT_MQTT_TEXT": "MQTT", + "CAT_BUS_TEXT": "Bus", + "CAT_IPWE_TEXT": "IPWE", + "CAT_DHTBUS_TEXT": "DHT", + "CAT_ONEWIREBUS_TEXT": "OneWire", + "CAT_DEBUG_TEXT": "Debugging", + "CAT_MAX_TEXT": "MAX!", + "CAT_LOGGING_TEXT": "Logging", + "STR0_TEXT": "Date/time", + "STR1_TEXT": "Hours/minutes", + "STR2_TEXT": "Day/month", + "STR3_TEXT": "Year", + "STR5_TEXT": "Start of summer time day/month", + "STR6_TEXT": "End of summer time day/month", + "STR20_TEXT": "Language selection", + "STR21_TEXT": "Display special operation", + "STR22_TEXT": "Info", + "STR23_TEXT": "Error display", + "STR25_TEXT": "Display contrast", + "STR26_TEXT": "Lock operation", + "STR27_TEXT": "Lock programming", + "STR28_TEXT": "Control unit direct adjustment", + "STR29_TEXT": "Units", + "STR30_TEXT": "Secure control unit basic settings", + "STR31_TEXT": "Activate control unit basic settings", + "STR40_TEXT": "Use as", + "STR42_TEXT": "Assignment of room device 1", + "STR42_2_TEXT": "Effect of an RG on the heating circuits", + "STR44_TEXT": "Operation of HK 2", + "STR46_TEXT": "Operation of HK P", + "STR48_TEXT": "Effect of presence button", + "STR54_TEXT": "Room sensor correction", + "STR70_TEXT": "Device version of control panel", + "STR71_TEXT": "Room device type", + "STR120_TEXT": "Binding", + "STR121_TEXT": "Test mode", + "STR130_TEXT": "Room device 1 status", + "STR131_TEXT": "Room device 2 status", + "STR132_TEXT": "Room device P status", + "STR133_TEXT": "Outdoor sensor P status", + "STR134_TEXT": "Repeater P status", + "STR135_TEXT": "Control unit 1 status", + "STR136_TEXT": "Control unit 2 status", + "STR137_TEXT": "Control unit P status", + "STR138_TEXT": "Service device status", + "STR140_TEXT": "Delete all devices", + "STR701_TEXT": "Presence button (temporary absence)", + "STR709_TEXT": "Comfort setpoint minimum", + "STR711_TEXT": "Comfort setpoint maximum", + "STR733_TEXT": "Extension of daily heating limit", + "STR734_TEXT": "Room temperature reduction with timer", + "STR742_TEXT": "Flow setpoint room thermostat", + "STR744_TEXT": "Desired switching behavior of room thermostat", + "STR746_TEXT": "Delay heat demand", + "STR761_TEXT": "Heating limit room controller", + "STR781_TEXT": "Rapid reduction factor", + "STR794_TEXT": "Heating gradient", + "STR809_TEXT": "Pump continuous operation", + "STR810_TEXT": "System frost protection HK pump", + "STR812_TEXT": "Flow frost protection", + "STR820_TEXT": "Overheating protection pump circuit", + "STR831_TEXT": "Mixer cooling", + "STR832_TEXT": "Drive type", + "STR833_TEXT": "Switching difference 2-point", + "STR835_TEXT": "Mixer P-band Xp", + "STR836_TEXT": "Mixer readjustment time Tn", + "STR855_TEXT": "Flow temperature setpoint screed drying", + "STR856_TEXT": "Screed day current", + "STR857_TEXT": "Screed days fulfilled", + "STR861_TEXT": "Superheat drop", + "STR864_TEXT": "Interlock signal amplification", + "STR870_TEXT": "With buffer storage", + "STR872_TEXT": "With pre-control/supply pump", + "STR880_TEXT": "Pump speed reduction", + "STR881_TEXT": "Starting speed", + "STR882_TEXT": "Minimum pump speed", + "STR883_TEXT": "Maximum pump speed", + "STR886_2_TEXT": "Maximum pump speed OEM", + "STR888_2_TEXT": "Characteristic curve correction at 50% speed", + "STR889_TEXT": "Filter time constant speed controller", + "STR890_TEXT": "Flow setpoint correction speed controller", + "STR895_TEXT": "dT spread maximum", + "STR898_TEXT": "Operating level switching", + "STR904_TEXT": "Protection setpoint", + "STR907_TEXT": "Release", + "STR908_TEXT": "Flow setpoint at outdoor temperature 25 °C", + "STR909_TEXT": "Flow setpoint at outdoor temperature 35 °C", + "STR912_TEXT": "Cooling limit at outdoor temperature", + "STR913_TEXT": "Locking time after heating end", + "STR914_TEXT": "Daily cooling limit", + "STR918_TEXT": "Summer compensation start at outdoor temperature", + "STR919_TEXT": "Summer compensation end at outdoor temperature", + "STR920_TEXT": "Summer compensation setpoint increase", + "STR923_TEXT": "Flow setpoint min at outdoor temperature 25 °C", + "STR924_TEXT": "Flow setpoint min at outdoor temperature 35 °C", + "STR933_TEXT": "Cooling limit room controller", + "STR937_TEXT": "System frost protection cooling circuit pump", + "STR945_TEXT": "Mixing valve in heating mode", + "STR946_TEXT": "Locking time dew point guard", + "STR947_TEXT": "Flow setpoint increase hygrostat", + "STR948_TEXT": "Flow setpoint increase start at relative humidity", + "STR950_TEXT": "Flow temperature difference dew point", + "STR963_TEXT": "With pre-control/supply pump", + "STR1601_TEXT": "Eco operating mode selection", + "STR1602_TEXT": "DHW status", + "STR1603_TEXT": "Manual DHW push", + "STR1614_TEXT": "DHW rated setpoint maximum", + "STR1616_TEXT": "Photovoltaic setpoint", + "STR1630_TEXT": "DHW charging priority", + "STR1648_TEXT": "Legionella function circulation temperature difference", + "STR1663_TEXT": "Circulation setpoint", + "STR1680_TEXT": "Drinking water operating mode switching", + "STR1859_TEXT": "Flow setpoint consumer request", + "STR1875_TEXT": "Superheat drop", + "STR2008_TEXT": "H1 DHW charging priority", + "STR2010_TEXT": "H1 Superheat drop", + "STR2012_TEXT": "H1 with buffer storage", + "STR2014_TEXT": "H1 pre-control/supply pump", + "STR2015_TEXT": "H1 cold request", + "STR2033_TEXT": "H2 DHW charging priority", + "STR2035_TEXT": "H2 Superheat drop", + "STR2037_TEXT": "H2 with buffer storage", + "STR2039_TEXT": "H2 pre-control/supply pump", + "STR2040_TEXT": "H2 cold request", + "STR2044_TEXT": "H3 DHW charging priority", + "STR2046_TEXT": "H3 Superheat drop", + "STR2048_TEXT": "H3 with buffer storage", + "STR2050_TEXT": "H3 pre-control/supply pump", + "STR2051_TEXT": "H3 cold request", + "STR2055_TEXT": "Solar heating setpoint", + "STR2056_TEXT": "Generator heating setpoint", + "STR2065_TEXT": "Solar charging priority", + "STR2070_TEXT": "Swimming pool temperature maximum", + "STR2080_TEXT": "With solar integration", + "STR2112_TEXT": "Flow setpoint cooling min", + "STR2150_TEXT": "Pre-control/supply pump", + "STR2203_TEXT": "Release below outdoor temperature", + "STR2204_TEXT": "Release above outdoor temperature", + "STR2205_TEXT": "In eco mode", + "STR2206_TEXT": "Operation/Standby", + "STR2208_TEXT": "Buffer charging", + "STR2211_TEXT": "Setpoint minimum OEM", + "STR2213_TEXT": "Setpoint maximum OEM", + "STR2214_TEXT": "Setpoint manual operation", + "STR2215_TEXT": "Max. control difference without interruption of the minimum break (°K)", + "STR2217_TEXT": "Setpoint frost protection", + "STR2220_TEXT": "Release integral stage 2", + "STR2221_TEXT": "Reset integral stage 2", + "STR2222_TEXT": "Forced switching stage 2", + "STR2232_TEXT": "Flap drive running time", + "STR2233_TEXT": "Flap drive P-band Xp", + "STR2234_TEXT": "Flap drive readjustment time Tn", + "STR2235_TEXT": "Flap drive holding time Tv", + "STR2236_TEXT": "P-band Xp drinking water", + "STR2237_TEXT": "Readjustment time (Tn) drinking water", + "STR2238_TEXT": "Holding time (Tv) drinking water", + "STR2240_TEXT": "Switching difference boiler", + "STR2241_TEXT": "Boiler burner running time minimum", + "STR2243_TEXT": "Combustion pause time minimum", + "STR2245_TEXT": "Switching difference combustion pause", + "STR2250_TEXT": "Pump run-on time", + "STR2253_TEXT": "Pump run-on time after DHW operation", + "STR2260_TEXT": "Consumer soft start", + "STR2261_TEXT": "Soft start boiler pump", + "STR2262_TEXT": "Switch-on optimization", + "STR2264_TEXT": "Soft start-up anticipation time", + "STR2270_TEXT": "Return setpoint minimum", + "STR2271_TEXT": "Return setpoint min OEM", + "STR2272_TEXT": "Return influence consumer", + "STR2285_TEXT": "Mixer holding time Tv", + "STR2290_TEXT": "Switching difference bypass pump", + "STR2291_TEXT": "Bypass pump control", + "STR2300_TEXT": "System frost protection boiler pump", + "STR2301_TEXT": "Boiler pump with generator lock", + "STR2305_TEXT": "Effect of generator lock", + "STR2310_TEXT": "TR function", + "STR2315_TEXT": "Temperature stroke minimum", + "STR2316_TEXT": "Temperature stroke maximum", + "STR2317_TEXT": "Temperature stroke nominal", + "STR2320_TEXT": "Pump modulation", + "STR2321_TEXT": "Starting speed boiler pump", + "STR2324_TEXT": "Speed P-band Xp", + "STR2325_TEXT": "Speed readjustment time Tn", + "STR2326_TEXT": "Speed holding time Tv", + "STR2327_TEXT": "Minimum pump speed OEM", + "STR2328_TEXT": "Maximum pump speed OEM", + "STR2329_TEXT": "Pump setpoint reduction", + "STR2330_TEXT": "Power nominal", + "STR2331_TEXT": "Power basic level", + "STR2334_TEXT": "Power at pump speed min", + "STR2335_TEXT": "Power at pump speed max", + "STR2340_TEXT": "Auto generator follow-up 2 x 1 cascade", + "STR2441_2_TEXT": "Blower power heating max", + "STR2442_2_TEXT": "Blower power charging max", + "STR2442_3_TEXT": "Blower speed max heating max", + "STR2443_2_TEXT": "Blower power start value DLH", + "STR2443_3_TEXT": "Blower speed min heating max", + "STR2444_TEXT": "Power minimum", + "STR2444_2_TEXT": "Blower power DHW max", + "STR2444_3_TEXT": "Blower speed DHW max", + "STR2445_TEXT": "Nominal power boiler", + "STR2445_2_TEXT": "Blower shutdown heating operation", + "STR2446_TEXT": "Blower shutdown delay", + "STR2450_TEXT": "Controller delay", + "STR2452_2_TEXT": "Controller delay blower power", + "STR2452_3_TEXT": "Controller delay blower speed", + "STR2457_TEXT": "Settling time HK", + "STR2459_TEXT": "Locking time dynamic switching difference", + "STR2460_TEXT": "Switching difference one DHW", + "STR2461_TEXT": "Switching difference off min DHW", + "STR2462_TEXT": "Switching difference off max DHW", + "STR2463_TEXT": "Settling time DHW", + "STR2464_TEXT": "Dynamic switching difference when setpoint change", + "STR2465_TEXT": "Min setpoint change dynamic switching difference", + "STR2466_TEXT": "Dynamic switching difference when changing HK/DHW", + "STR2467_TEXT": "Dynamic switching difference when burner on", + "STR2470_TEXT": "Delay heat demand special operation", + "STR2473_TEXT": "Flue gas temperature power reduction", + "STR2474_TEXT": "Flue gas temperature shutdown limit", + "STR2476_TEXT": "Flue gas monitoring shutdown", + "STR2477_TEXT": "Flue gas monitoring start prevention time", + "STR2478_TEXT": "Flue gas temperature power limit", + "STR2480_TEXT": "Static pressure monitoring shutdown", + "STR2490_TEXT": "Dynamic pressure monitoring shutdown", + "STR2491_TEXT": "Dynamic monitoring pressure difference min", + "STR2492_TEXT": "Dynamic monitoring pressure difference max", + "STR2494_TEXT": "Dynamic monitoring pressure increase", + "STR2495_TEXT": "Dynamic monitoring monitoring time", + "STR2496_TEXT": "Dynamic monitoring time constant", + "STR2500_TEXT": "Pressure switch shutdown", + "STR2502_TEXT": "Flow switch shutdown", + "STR2504_TEXT": "Min on time switch", + "STR2510_TEXT": "Quick shutdown temperature level", + "STR2511_TEXT": "Quick shutdown monitoring time", + "STR2512_TEXT": "Quick shutdown monitoring RT", + "STR2527_TEXT": "Boiler temperature power reduction", + "STR2528_TEXT": "Switching difference power reduction", + "STR2531_TEXT": "Trigger temperature guard", + "STR2540_TEXT": "Proportional gain Kp DHW", + "STR2543_TEXT": "Proportional gain Kp HK", + "STR2550_TEXT": "Gas energy counting", + "STR2551_TEXT": "Gas energy counting correction", + "STR2560_TEXT": "Shutdown delay exhaust gas flap", + "STR2630_TEXT": "Automatic venting function", + "STR2655_TEXT": "Switch-on duration venting", + "STR2656_TEXT": "Switch-off duration venting", + "STR2657_TEXT": "Number of repetitions", + "STR2662_TEXT": "Venting duration heating circuit", + "STR2663_TEXT": "Venting duration drinking water", + "STR2670_TEXT": "Permanent temperature monitoring", + "STR2672_TEXT": "Temperature monitoring increase", + "STR2675_TEXT": "Monitoring flow with UV in DHW", + "STR2681_TEXT": "Pump run-up UV DHW", + "STR2682_TEXT": "Pump run-up UV HK", + "STR2700_TEXT": "Result of last drift test", + "STR2700_2_TEXT": "Filtered ionization current", + "STR2702_TEXT": "Trigger new drift test", + "STR2702_2_TEXT": "Position stepper motor", + "STR2703_TEXT": "Reset drift test", + "STR2703_2_TEXT": "Learning value gas quality", + "STR2704_TEXT": "Lower limit drift test fault", + "STR2705_TEXT": "Upper limit drift test fault", + "STR2705_2_TEXT": "R-value", + "STR2706_TEXT": "Operating phase", + "STR2720_TEXT": "Release setting gas type", + "STR2721_TEXT": "Gas type", + "STR2727_TEXT": "Ignition and monitoring range", + "STR2741_TEXT": "ADA point no.", + "STR2742_TEXT": "ADA filter value", + "STR2743_TEXT": "ADA correction", + "STR2744_TEXT": "ADA past time", + "STR2745_TEXT": "ADA result", + "STR2750_TEXT": "Upcoming drift tests", + "STR2751_TEXT": "ADA time interval 1", + "STR2752_TEXT": "ADA time interval 2", + "STR2753_TEXT": "ADA time interval 3", + "STR2776_TEXT": "Minimum pump speed for DHW", + "STR2777_TEXT": "Maximum pump speed for DHW", + "STR2778_TEXT": "Minimum pump speed for cooling operation", + "STR2779_TEXT": "Maximum pump speed for cooling operation", + "STR2785_TEXT": "Max condensation temperature", + "STR2786_TEXT": "Max condensation temperature switching difference", + "STR2787_TEXT": "Max condensation temperature reduction", + "STR2789_TEXT": "Condenser pump in DHW", + "STR2790_TEXT": "Modulation condenser pump", + "STR2799_TEXT": "Pump setpoint reduction", + "STR2800_TEXT": "Condenser pump frost protection", + "STR2801_TEXT": "Condenser pump control", + "STR2802_TEXT": "Advance time condenser pump", + "STR2803_TEXT": "Run-on time condenser pump", + "STR2804_TEXT": "Max temperature spread condense", + "STR2805_TEXT": "Desired temperature spread condenser", + "STR2806_TEXT": "Max deviation spread condenser", + "STR2807_TEXT": "Min condenser spread DHW", + "STR2809_TEXT": "Temperature frost alarm", + "STR2810_TEXT": "Condenser frost protection", + "STR2811_TEXT": "Run-on condenser frost protection", + "STR2812_TEXT": "Minimum outdoor temperature limit air", + "STR2813_TEXT": "Maximum outdoor temperature limit air", + "STR2814_TEXT": "Source temperature maximum", + "STR2815_TEXT": "Source temperature min water", + "STR2816_TEXT": "Source temperature min brine", + "STR2817_TEXT": "Switching difference source protection", + "STR2818_TEXT": "Increase source protection temperature min screed", + "STR2819_TEXT": "Advance time source", + "STR2820_TEXT": "Run-on time source", + "STR2821_TEXT": "Source pump start-up time maximum", + "STR2822_TEXT": "Time limit source temperature min brine", + "STR2823_TEXT": "Desired temperature spread evaporator", + "STR2824_TEXT": "Max deviation spread evaporator", + "STR2825_TEXT": "Min evaporator temperature", + "STR2826_TEXT": "Max evaporator temperature", + "STR2827_TEXT": "Time limit source temperature", + "STR2829_TEXT": "Extended operating range min evaporator temperature", + "STR2830_TEXT": "Max duration hot evaporator temperature", + "STR2835_TEXT": "Restart lock compressor", + "STR2836_TEXT": "Start of shutdown temperature reduction", + "STR2837_TEXT": "Shutdown temperature max lowered", + "STR2838_TEXT": "Stabilization time process reversal", + "STR2839_TEXT": "Stabilization time switching DHW/HK", + "STR2840_TEXT": "Switching difference return temperature", + "STR2841_TEXT": "Maintain compressor running time min", + "STR2842_TEXT": "Compressor running time minimum", + "STR2843_TEXT": "Compressor standstill time min", + "STR2844_TEXT": "Shutdown temperature max", + "STR2845_TEXT": "Reduction shutdown temperature max", + "STR2846_TEXT": "Hot gas temperature max", + "STR2847_TEXT": "Switching difference hot gas temperature max", + "STR2848_TEXT": "Reduction of hot gas temperature Max", + "STR2849_TEXT": "Setpoint hot gas temperature", + "STR2850_TEXT": "SD setpoint hot gas temperature", + "STR2851_TEXT": "Actual hot gas temperature", + "STR2852_TEXT": "ND delay on start-up", + "STR2853_TEXT": "ND delay in operation", + "STR2854_TEXT": "ND monitoring", + "STR2860_TEXT": "Lock stage 2 at DHW", + "STR2861_TEXT": "Release stage 2 below outdoor temperature", + "STR2862_TEXT": "Lock time stage/mod", + "STR2863_TEXT": "Release integral stage 2/mod", + "STR2864_TEXT": "Reset integral stage 2/mod", + "STR2865_TEXT": "Compressor mode switchover", + "STR2867_TEXT": "Power optimum", + "STR2870_TEXT": "Compressor modulation max", + "STR2871_TEXT": "Compressor modulation min", + "STR2873_TEXT": "Compressor modulation runtime", + "STR2874_TEXT": "Compressor modulation P-band Xp", + "STR2875_TEXT": "Compressor modulation readjustment time Tn", + "STR2878_TEXT": "PWM period digital scroll", + "STR2879_TEXT": "Compressor modulation runtime to", + "STR2880_TEXT": "Use electric pre-heat", + "STR2881_TEXT": "Lock time electric pre-heat", + "STR2882_TEXT": "Release integral electric pre-heat", + "STR2883_TEXT": "Reset integral electric pre-heat", + "STR2884_TEXT": "Release electric pre-heat below outdoor temperature", + "STR2886_TEXT": "Compensation of heat deficit", + "STR2889_TEXT": "Duration of fault repetition", + "STR2893_TEXT": "Number of DHW charging attempts", + "STR2894_TEXT": "Delay three-phase fault", + "STR2895_TEXT": "Delay flow guard", + "STR2896_TEXT": "Flow guard source active", + "STR2898_TEXT": "Min flow flow guard source", + "STR2899_TEXT": "Min flow flow guard consumer", + "STR2900_TEXT": "Refrigerant", + "STR2903_TEXT": "Release strategy", + "STR2904_TEXT": "Release COP", + "STR2908_TEXT": "Outdoor temperature limits at DHW", + "STR2910_TEXT": "Release above outdoor temperature", + "STR2911_TEXT": "For buffer compulsory charging", + "STR2916_TEXT": "Setpoint HP max DHW", + "STR2920_TEXT": "At EW lock", + "STR2922_TEXT": "Condenser overheat protection", + "STR2923_TEXT": "Condenser overheat protection buffer sensor", + "STR2941_TEXT": "Use diverter valve Y28", + "STR2951_TEXT": "Defrost release below outdoor temperature", + "STR2952_TEXT": "Switching differential defrost", + "STR2953_TEXT": "Temperature differential defrost end", + "STR2954_TEXT": "Evaporator temperature defrost end", + "STR2963_TEXT": "Duration until forced defrost", + "STR2964_TEXT": "Defrost duration max", + "STR2965_TEXT": "Drip duration evaporator", + "STR2966_TEXT": "Cooling down duration evaporator", + "STR2970_TEXT": "Switch-off temperature minimum", + "STR3000_TEXT": "Switch-off temperature max cooling", + "STR3002_TEXT": "Source temperature min cooling operation", + "STR3004_TEXT": "Switching differential switchover cooling passive/active", + "STR3006_TEXT": "During compressor operation", + "STR3007_TEXT": "In passive cooling operation", + "STR3008_TEXT": "Spreading condenser pump cooling operation", + "STR3009_TEXT": "Modulation fan/source pump", + "STR3010_TEXT": "Speed max fan/source pump", + "STR3011_TEXT": "Speed min fan/source pump", + "STR3012_TEXT": "Source pump switch-off point under temperature B83", + "STR3014_TEXT": "Switching differential source pump off", + "STR3015_TEXT": "Start of speed control B83", + "STR3016_TEXT": "End of speed control B83", + "STR3017_TEXT": "Lock time speed control", + "STR3019_TEXT": "Start-up number fan/source pump", + "STR3025_TEXT": "Silent mode speed max", + "STR3026_TEXT": "Silent mode on", + "STR3027_TEXT": "Silent mode off", + "STR3028_TEXT": "Silent mode speed increase start", + "STR3029_TEXT": "Silent mode speed increase end", + "STR3030_TEXT": "Auto-correction HP condenser sensor", + "STR3031_TEXT": "Correction HP flow sensor", + "STR3032_TEXT": "Correction HP return sensor", + "STR3033_TEXT": "Correction status", + "STR3090_TEXT": "Pulse counting heat", + "STR3092_TEXT": "Pulse unit heat", + "STR3093_TEXT": "Pulse unit heat counter", + "STR3094_TEXT": "Pulse unit heat denominator", + "STR3095_TEXT": "Flow measurement heat", + "STR3097_TEXT": "Flow capacity heating", + "STR3098_TEXT": "Flow capacity drinking water", + "STR3100_TEXT": "Pulse counting energy", + "STR3102_TEXT": "Pulse unit energy", + "STR3103_TEXT": "Pulse value energy counter", + "STR3104_TEXT": "Pulse value energy denominator", + "STR3106_TEXT": "Average gas energy content", + "STR3108_TEXT": "Electric source output", + "STR3109_TEXT": "Counting internal electric heater flow", + "STR3110_TEXT": "Heat released", + "STR3112_TEXT": "Heat absorbed source", + "STR3113_TEXT": "Energy used", + "STR3116_TEXT": "Performance factor", + "STR3119_TEXT": "Cut-off date annual performance factor day/month", + "STR3121_TEXT": "Heat released heating 1", + "STR3122_TEXT": "Heat released DHW 1", + "STR3123_TEXT": "Cooling released 1", + "STR3124_TEXT": "Energy used heating 1", + "STR3125_TEXT": "Energy used DHW 1", + "STR3126_TEXT": "Energy used cooling 1", + "STR3128_TEXT": "Heat released heating 2", + "STR3129_TEXT": "Heat released DHW 2", + "STR3130_TEXT": "Cooling released 2", + "STR3131_TEXT": "Energy used heating 2", + "STR3132_TEXT": "Energy used DHW 2", + "STR3133_TEXT": "Energy used cooling 2", + "STR3135_TEXT": "Heat released heating 3", + "STR3136_TEXT": "Heat released DHW 3", + "STR3137_TEXT": "Cooling released 3", + "STR3138_TEXT": "Energy used heating 3", + "STR3139_TEXT": "Energy used DHW 3", + "STR3140_TEXT": "Energy used cooling 3", + "STR3142_TEXT": "Heat released heating 4", + "STR3143_TEXT": "Heat released DHW 4", + "STR3144_TEXT": "Cooling released 4", + "STR3145_TEXT": "Energy used heating 4", + "STR3146_TEXT": "Energy used DHW 4", + "STR3147_TEXT": "Energy used cooling 4", + "STR3149_TEXT": "Heat released heating 5", + "STR3150_TEXT": "Heat released DHW 5", + "STR3151_TEXT": "Cooling released 5", + "STR3152_TEXT": "Energy used heating 5", + "STR3153_TEXT": "Energy used DHW 5", + "STR3154_TEXT": "Energy used cooling 5", + "STR3156_TEXT": "Heat released heating 6", + "STR3157_TEXT": "Heat released DHW 6", + "STR3158_TEXT": "Cooling released 6", + "STR3159_TEXT": "Energy used heating 6", + "STR3160_TEXT": "Energy used DHW 6", + "STR3161_TEXT": "Energy used cooling 6", + "STR3163_TEXT": "Heat released heating 7", + "STR3164_TEXT": "Heat released DHW 7", + "STR3165_TEXT": "Cooling released 7", + "STR3166_TEXT": "Energy used heating 7", + "STR3167_TEXT": "Energy used DHW 7", + "STR3168_TEXT": "Energy used cooling 7", + "STR3170_TEXT": "Heat released heating 8", + "STR3171_TEXT": "Heat released DHW 8", + "STR3172_TEXT": "Cooling released 8", + "STR3173_TEXT": "Energy used heating 8", + "STR3174_TEXT": "Energy used DHW 8", + "STR3175_TEXT": "Energy used cooling 8", + "STR3177_TEXT": "Heat released heating 9", + "STR3178_TEXT": "Heat released DHW 9", + "STR3179_TEXT": "Cooling released 9", + "STR3180_TEXT": "Energy used heating 9", + "STR3181_TEXT": "Energy used DHW 9", + "STR3182_TEXT": "Energy used cooling 9", + "STR3184_TEXT": "Heat released heating 10", + "STR3185_TEXT": "Heat released DHW 10", + "STR3186_TEXT": "Cooling released 10", + "STR3187_TEXT": "Energy used heating 10", + "STR3188_TEXT": "Energy used DHW 10", + "STR3189_TEXT": "Energy used cooling 10", + "STR3190_TEXT": "Reset cut-off date memory", + "STR3192_TEXT": "Counting internal electric heater DHW", + "STR3193_TEXT": "Counting internal electric heater buffer", + "STR3195_TEXT": "Electric pump output heating", + "STR3196_TEXT": "Electric pump output DHW", + "STR3257_TEXT": "Flow capacity source", + "STR3264_TEXT": "Energy price HT", + "STR3265_TEXT": "Energy price low tariff/smart grid state: wish", + "STR3266_TEXT": "Energy price smart grid state: force", + "STR3267_TEXT": "Energy price alternative generator", + "STR3510_TEXT": "Control strategy", + "STR3511_TEXT": "Power band minimum", + "STR3512_TEXT": "Power band maximum", + "STR3514_TEXT": "Sequence of stages", + "STR3516_TEXT": "Maximum number of heat generators compulsory charging", + "STR3517_TEXT": "Maximum number of heat generators compulsory charging at dampened outdoor temperature", + "STR3518_TEXT": "Number of heat generators defrost allowed", + "STR3522_TEXT": "Release integral generator sequence cooling", + "STR3523_TEXT": "Reset integral generator sequence cooling", + "STR3525_TEXT": "Switch-on delay cooling", + "STR3530_TEXT": "Release integral generator sequence", + "STR3531_TEXT": "Reset integral generator sequence", + "STR3532_TEXT": "Restart lock", + "STR3533_TEXT": "Switch-on delay", + "STR3534_TEXT": "Compulsory time base stage", + "STR3538_TEXT": "Replacement rail flow temperature", + "STR3540_TEXT": "Automatic generator sequence switchover", + "STR3541_TEXT": "Automatic generator sequence exclusion", + "STR3542_TEXT": "Generator sequence cooling mirrored", + "STR3543_TEXT": "Generator sequence with optimal energy", + "STR3544_TEXT": "Leading generator", + "STR3550_TEXT": "Start-up relief cascade pump", + "STR3590_TEXT": "Temperature spread minimum", + "STR3690_TEXT": "Setpoint increase main generator", + "STR3691_TEXT": "Power limit main generator", + "STR3692_TEXT": "At drinking water loading", + "STR3694_TEXT": "Outdoor temperature limits at DHW", + "STR3705_TEXT": "Post-heating time", + "STR3718_TEXT": "Release integral", + "STR3719_TEXT": "Reset integral", + "STR3720_TEXT": "Switching integral", + "STR3722_TEXT": "Switching differential off", + "STR3723_TEXT": "Lock time", + "STR3725_TEXT": "Control sensor", + "STR3750_TEXT": "Generator type", + "STR3755_TEXT": "Delay fault position", + "STR3813_TEXT": "Temperature differential buffer on", + "STR3814_TEXT": "Temperature differential buffer off", + "STR3815_TEXT": "Charging temperature min buffer", + "STR3816_TEXT": "Temperature differential swimming pool on", + "STR3817_TEXT": "Temperature differential swimming pool off", + "STR3818_TEXT": "Charging temperature min swimming pool", + "STR3822_TEXT": "Charging priority storage", + "STR3825_TEXT": "Charging time relative priority", + "STR3826_TEXT": "Waiting time relative priority", + "STR3827_TEXT": "Waiting time parallel operation", + "STR3828_TEXT": "Delay secondary pump", + "STR3830_TEXT": "Collector start function", + "STR3832_TEXT": "Collector start function on", + "STR3833_TEXT": "Collector start function off", + "STR3834_TEXT": "Collector start function gradient", + "STR3835_TEXT": "Min collector temperature start function", + "STR3862_TEXT": "Effect of evaporation monitoring", + "STR3880_TEXT": "Antifreeze", + "STR3881_TEXT": "Antifreeze concentration", + "STR3884_TEXT": "Pump flow rate", + "STR3886_TEXT": "Pulse counting yield", + "STR3887_TEXT": "Pulse unit yield", + "STR3888_TEXT": "Pulse value yield counter", + "STR3889_TEXT": "Pulse value yield denominator", + "STR3891_TEXT": "Flow measurement yield", + "STR3896_TEXT": "Correction solar flow sensor", + "STR3897_TEXT": "Solar return sensor", + "STR4102_TEXT": "Locks other generators", + "STR4103_TEXT": "Charging priority DHW storage", + "STR4133_TEXT": "Comparison temperature", + "STR4134_TEXT": "DHW storage connection", + "STR4135_TEXT": "Boiler setpoint DHW charging", + "STR4136_TEXT": "Drinking water loading with Q3", + "STR4137_TEXT": "Buffer storage connection", + "STR4138_TEXT": "Boiler setpoint buffer charging", + "STR4141_TEXT": "Over-temperature derivation", + "STR4158_TEXT": "Return flow influence return flow control", + "STR4190_TEXT": "Residual heat function duration max", + "STR4192_TEXT": "Residual heat function triggering", + "STR4705_TEXT": "Compulsory charging", + "STR4708_TEXT": "Compulsory charging setpoint cooling", + "STR4709_TEXT": "Compulsory charging set heating min", + "STR4710_TEXT": "Compulsory charging set heating max", + "STR4711_TEXT": "Compulsory charging time", + "STR4712_TEXT": "Compulsory charging duration max", + "STR4720_TEXT": "Auto generator lock", + "STR4723_TEXT": "Temperature differential buffer/cooling circuit", + "STR4724_TEXT": "Min storage temperature heating operation", + "STR4726_TEXT": "Max storage temperature cooling operation", + "STR4728_TEXT": "Relative temperature differential buffer/heating circuit", + "STR4735_TEXT": "Setpoint reduction B42/B41", + "STR4739_TEXT": "Layer protection", + "STR4740_TEXT": "Layer protection temperature differential max", + "STR4743_TEXT": "Layer protection preview time", + "STR4744_TEXT": "Layer protection readjustment time", + "STR4746_TEXT": "Drinking water protection combi", + "STR4749_TEXT": "Minimum charging setpoint solar", + "STR4750_TEXT": "Charging temperature maximum", + "STR4751_TEXT": "Storage temperature maximum", + "STR4755_TEXT": "Return cooling temperature", + "STR4756_TEXT": "Return cooling DHW/heating circuit", + "STR4757_TEXT": "Return cooling collector", + "STR4760_TEXT": "Charging sensor electric heater", + "STR4761_TEXT": "Compulsory charging with electric", + "STR4783_TEXT": "With solar integration", + "STR4790_TEXT": "Temperature differential return diversion on", + "STR4791_TEXT": "Temperature differential return diversion off", + "STR4795_TEXT": "Comparison temperature return diversion", + "STR4796_TEXT": "Actual return diversion", + "STR4811_TEXT": "Through-charging temperature minimum", + "STR4813_TEXT": "Through-charging sensor", + "STR4830_TEXT": "Flow temperature", + "STR4831_TEXT": "Switching differential flow diversion", + "STR5007_TEXT": "Charging request", + "STR5008_TEXT": "Charging request time-controlled", + "STR5010_TEXT": "Drinking water loading", + "STR5011_TEXT": "Drinking water storage charging pre-laying time", + "STR5013_TEXT": "Charging optimal energy", + "STR5016_TEXT": "Charging optimal energy contact", + "STR5021_TEXT": "DHW reloading surcharge", + "STR5022_TEXT": "DHW post-charging control", + "STR5022_2_TEXT": "Charging type", + "STR5023_TEXT": "Setpoint reduction B31", + "STR5024_TEXT": "DHW switching differential 1 on", + "STR5025_TEXT": "DHW switching differential 1 off min", + "STR5026_TEXT": "DHW switching differential 1 off max", + "STR5027_TEXT": "DHW switching differential 2 on", + "STR5028_TEXT": "DHW switching differential 2 off min", + "STR5029_TEXT": "DHW switching differential 2 off max", + "STR5030_TEXT": "DHW charging time limit", + "STR5032_TEXT": "Max charging abort temperature", + "STR5040_TEXT": "DHW discharge protection", + "STR5041_TEXT": "Discharge protection sensor", + "STR5051_TEXT": "DHW storage temperature maximum", + "STR5056_TEXT": "DHW return cooling boiler/heating circuit", + "STR5057_TEXT": "DHW return cooling collector", + "STR5060_TEXT": "DHW electric heater operating mode", + "STR5061_TEXT": "DHW electric heater release", + "STR5062_TEXT": "DHW electric heater control", + "STR5070_TEXT": "DHW automatic push", + "STR5071_TEXT": "DHW charging priority time push", + "STR5085_TEXT": "DHW over-temperature reduction", + "STR5090_TEXT": "DHW with buffer storage", + "STR5092_TEXT": "DHW with pre-regulator/feeder pump", + "STR5093_TEXT": "DHW with solar integration", + "STR5101_TEXT": "DHW pump speed minimum", + "STR5102_TEXT": "DHW pump speed maximum", + "STR5106_TEXT": "Pump speed minimum OEM", + "STR5107_TEXT": "Pump speed maximum OEM", + "STR5108_TEXT": "Start-up speed charging pump", + "STR5109_TEXT": "Start-up speed intermediate circuit pump", + "STR5130_TEXT": "DHW reloading strategy", + "STR5131_TEXT": "Comparison temperature reloading", + "STR5139_TEXT": "Intermediate circuit surcharge post-loading", + "STR5140_TEXT": "Intermediate circuit surcharge", + "STR5141_TEXT": "Intermediate circuit temperature exceed max", + "STR5142_TEXT": "Flow setpoint control delayed", + "STR5143_TEXT": "Flow setpoint control Xp", + "STR5144_TEXT": "Flow setpoint control Tn", + "STR5145_TEXT": "Flow setpoint control Tv", + "STR5146_TEXT": "Through-charging with B36", + "STR5148_TEXT": "Minimal run temperature difference Q33", + "STR5151_TEXT": "Intermediate circuit temperature excess delay", + "STR5406_TEXT": "Min target value difference to storage temperature", + "STR5420_TEXT": "Pre-target excess", + "STR5570_TEXT": "Temperature difference dt controller 1", + "STR5571_TEXT": "Temperature difference dt controller 1", + "STR5572_TEXT": "Switch-on temperature min dt controller 1", + "STR5573_TEXT": "Sensor 1 dt controller 1", + "STR5574_TEXT": "Sensor 2 dt controller 1", + "STR5575_TEXT": "Minimum on-time dt controller 1", + "STR5577_TEXT": "Pump/valve kick K21", + "STR5580_TEXT": "Temperature difference dt controller 2", + "STR5581_TEXT": "Temperature difference dt controller 2", + "STR5582_TEXT": "Switch-on temperature min dt controller 2", + "STR5583_TEXT": "Sensor 1 dt controller 2", + "STR5584_TEXT": "Sensor 2 dt controller 2", + "STR5585_TEXT": "Minimum on-time dt controller 2", + "STR5587_TEXT": "Pump/valve kick K22", + "STR5700_TEXT": "Preset", + "STR5711_TEXT": "Cooling circuit 1", + "STR5712_TEXT": "Use mixer 1", + "STR5721_TEXT": "Heating circuit 3", + "STR5730_TEXT": "Drinking water sensor B3", + "STR5730_2_TEXT": "Drinking water sensor", + "STR5731_TEXT": "Drinking water actuator Q3", + "STR5734_TEXT": "Basic position DHW diverting valve", + "STR5736_TEXT": "Drinking water separation circuit", + "STR5737_TEXT": "Effective direction DHW diverting valve", + "STR5738_TEXT": "Middle position DHW diverting valve", + "STR5740_TEXT": "Power electric DHW K6", + "STR5770_TEXT": "Generator type", + "STR5772_TEXT": "Burner pre-run time", + "STR5774_TEXT": "Control boiler pump/DHW diverting valve", + "STR5775_TEXT": "Boiler pump for DHW", + "STR5800_TEXT": "Heat source", + "STR5806_TEXT": "Type electric pre-run", + "STR5807_TEXT": "Refrigeration", + "STR5810_TEXT": "Spread HK at outside temperature -10 °C", + "STR5811_TEXT": "Power electric 1 pre-run K25", + "STR5813_TEXT": "Power electric 2 pre-run K26", + "STR5840_TEXT": "Solar actuator", + "STR5841_TEXT": "External solar heat exchanger", + "STR5870_TEXT": "Combination storage", + "STR5890_TEXT": "Relay output QX1", + "STR5890_2_TEXT": "Pump function output K6", + "STR5891_TEXT": "Relay output QX2", + "STR5891_2_TEXT": "Pump function output K7", + "STR5892_TEXT": "Relay output QX3", + "STR5894_TEXT": "Relay output QX4", + "STR5895_TEXT": "Relay output QX5", + "STR5896_TEXT": "Relay output QX6", + "STR5902_TEXT": "Relay output QX21", + "STR5904_TEXT": "Relay output QX23", + "STR5908_TEXT": "Function output QX3-Mod", + "STR5909_TEXT": "Function output QX4-Mod", + "STR5930_TEXT": "Sensor input BX 1", + "STR5931_TEXT": "Sensor input BX 2", + "STR5932_TEXT": "Sensor input BX 3", + "STR5933_TEXT": "Sensor input BX 4", + "STR5934_TEXT": "Sensor input BX5", + "STR5941_TEXT": "Sensor input BX21", + "STR5942_TEXT": "Sensor input BX22", + "STR5951_TEXT": "Effective direction contact H1", + "STR5952_TEXT": "Minimum flow target value H1", + "STR5953_TEXT": "Voltage value 1 H1", + "STR5954_TEXT": "Heat demand 10V H1", + "STR5954_2_TEXT": "Function value 1 H1", + "STR5955_TEXT": "Voltage value 2 H1", + "STR5956_TEXT": "Pressure value 3.5V H1", + "STR5956_2_TEXT": "Function value 2 H1", + "STR5957_2_TEXT": "Operating mode switch HK+DHW", + "STR5960_2_TEXT": "Function input H2", + "STR5961_2_TEXT": "Effective direction contact H2", + "STR5962_2_TEXT": "Minimum flow target value H2", + "STR5963_2_TEXT": "Voltage value 1 H2", + "STR5964_2_TEXT": "Temperature value 10V H2", + "STR5960_TEXT": "Function input H3", + "STR5961_TEXT": "Effective direction contact H3", + "STR5962_TEXT": "Minimum flow target value H3", + "STR5963_TEXT": "Voltage value 1 H3", + "STR5964_TEXT": "Heat demand 10V H3", + "STR5964_3_TEXT": "Function value 1 H3", + "STR5965_TEXT": "Voltage value 2 H3", + "STR5966_TEXT": "Pressure value 3.5V H2", + "STR5966_2_TEXT": "Function value 2 H3", + "STR5970_2_TEXT": "Function input H4", + "STR5971_2_TEXT": "Effective direction contact H4", + "STR5973_2_TEXT": "Frequency value 1 H4", + "STR5974_TEXT": "Function value 1 H4", + "STR5975_2_TEXT": "Frequency value 2 H4", + "STR5976_2_TEXT": "Function value 2 H4", + "STR5977_TEXT": "Function input H5", + "STR5978_TEXT": "Function input SolCl", + "STR5978_2_TEXT": "Effective direction input H5", + "STR5980_TEXT": "Function input EX1", + "STR5981_TEXT": "Effective direction input EX1", + "STR5982_TEXT": "Function input EX2", + "STR5983_TEXT": "Effective direction input EX2", + "STR5984_TEXT": "Function input EX3", + "STR5985_TEXT": "Effective direction input EX3", + "STR5986_TEXT": "Function input EX4", + "STR5987_TEXT": "Effective direction input EX4", + "STR5988_TEXT": "Function input EX5", + "STR5989_TEXT": "Effective direction input EX5", + "STR5990_TEXT": "Function input EX6", + "STR5992_TEXT": "Function input EX7", + "STR6008_TEXT": "Function input H6", + "STR6009_TEXT": "Effective direction contact H6", + "STR6011_TEXT": "Function input H7", + "STR6012_TEXT": "Effective direction contact H7", + "STR6014_TEXT": "Function mixer group 1", + "STR6015_TEXT": "Function mixer group 2", + "STR6020_TEXT": "Function expansion module 1", + "STR6021_TEXT": "Function expansion module 2", + "STR6022_TEXT": "Function expansion module 3", + "STR6024_TEXT": "Function input EX21 module 1", + "STR6026_TEXT": "Function input EX21 module 2", + "STR6028_TEXT": "Function input EX21 module 3", + "STR6030_TEXT": "Relay output QX21 module 1", + "STR6031_TEXT": "Relay output QX22 module 1", + "STR6032_TEXT": "Relay output QX23 module 1", + "STR6033_TEXT": "Relay output QX21 module 2", + "STR6034_TEXT": "Relay output QX22 module 2", + "STR6035_TEXT": "Relay output QX23 module 2", + "STR6036_TEXT": "Relay output QX21 module 3", + "STR6037_TEXT": "Relay output QX22 module 3", + "STR6038_TEXT": "Relay output QX23 module 3", + "STR6040_TEXT": "Sensor input BX21 module 1", + "STR6041_TEXT": "Sensor input BX22 module 1", + "STR6042_TEXT": "Sensor input BX21 module 2", + "STR6043_TEXT": "Sensor input BX22 module 2", + "STR6044_TEXT": "Sensor input BX21 module 3", + "STR6045_TEXT": "Sensor input BX22 module 3", + "STR6048_2_TEXT": "Function value contact H2", + "STR6049_2_TEXT": "Voltage value 1 H2 module 1", + "STR6050_2_TEXT": "Function value 1 H2", + "STR6052_2_TEXT": "Function value 2 H2 module 1", + "STR6051_TEXT": "Voltage value 2 H2", + "STR6052_TEXT": "Function value 2 H2", + "STR6057_TEXT": "Voltage value 1 H2 module 2", + "STR6058_TEXT": "Function value 1 H2 module 2", + "STR6059_TEXT": "Voltage value 2 H2 module 2", + "STR6060_TEXT": "Function value 2 H2 module 2", + "STR6062_TEXT": "Function input H2 module 3", + "STR6063_TEXT": "Effective direction contact H2 module 3", + "STR6065_TEXT": "Voltage value 1 H2 module 3", + "STR6066_TEXT": "Function value 1 H2 module 3", + "STR6067_TEXT": "Voltage value 2 H2 module 3", + "STR6068_TEXT": "Function value 2 H2 module 3", + "STR6070_TEXT": "Function output UX", + "STR6071_TEXT": "Signal logic output UX", + "STR6072_TEXT": "Signal output UX", + "STR6075_TEXT": "Temperature value 10V UX", + "STR6078_TEXT": "Function output UX2", + "STR6085_TEXT": "PWM output P1", + "STR6089_TEXT": "Mod pump speed steps", + "STR6089_2_TEXT": "Function output UX3", + "STR6092_TEXT": "Mod pump PWM", + "STR6097_TEXT": "Sensor type collector", + "STR6098_TEXT": "Collector sensor correction", + "STR6099_TEXT": "Collector sensor correction 2", + "STR6100_TEXT": "Outdoor sensor correction", + "STR6101_TEXT": "Sensor type flue gas temperature", + "STR6102_TEXT": "Flue gas temperature sensor correction", + "STR6116_TEXT": "Time constant target value control", + "STR6117_TEXT": "Central target value control", + "STR6118_TEXT": "Target value drop delay", + "STR6128_TEXT": "Heat demand below outside temperature", + "STR6129_TEXT": "Heat demand above outside temperature", + "STR6131_TEXT": "Heat demand in eco mode", + "STR6135_TEXT": "Dehumidifier", + "STR6136_TEXT": "Dehumidifier release", + "STR6137_TEXT": "Dehumidifier relative humidity on", + "STR6138_TEXT": "Dehumidifier relative humidity switching difference", + "STR6140_TEXT": "Water pressure maximum", + "STR6141_TEXT": "Water pressure minimum", + "STR6142_TEXT": "Water pressure critical min", + "STR6143_TEXT": "Water pressure threshold for boiler and pump off", + "STR6144_TEXT": "Switching difference water pressure", + "STR6145_TEXT": "Minimum pressure difference after pump on", + "STR6146_TEXT": "Maximum pressure difference after pump on", + "STR6148_TEXT": "Static pressure monitoring 1", + "STR6150_TEXT": "Water pressure 2 maximum", + "STR6151_TEXT": "Water pressure 2 minimum", + "STR6152_TEXT": "Water pressure 2 critical min", + "STR6180_TEXT": "Water pressure 3 maximum", + "STR6181_TEXT": "Water pressure 3 minimum", + "STR6182_TEXT": "Water pressure 3 critical min", + "STR6200_TEXT": "Store sensors", + "STR6201_TEXT": "Clear sensors", + "STR6205_TEXT": "Reset parameters", + "STR6212_TEXT": "Control number generator 1", + "STR6213_TEXT": "Control number generator 2", + "STR6215_TEXT": "Control number storage", + "STR6217_TEXT": "Control number heating circuits", + "STR6221_TEXT": "Development index", + "STR6222_TEXT": "Device operating hours", + "STR6223_TEXT": "Previously unknown device query", + "STR6224_TEXT": "Device identification", + "STR6228_TEXT": "Bootloader version", + "STR6229_TEXT": "EEPROM version", + "STR6230_2_TEXT": "Configuration - Info 1 OEM", + "STR6231_TEXT": "Configuration - Info 2 OEM", + "STR6232_TEXT": "Access code commissioning?", + "STR6233_TEXT": "Access code expert level?", + "STR6234_TEXT": "Access code OEM?", + "STR6235_TEXT": "Access code OEM2?", + "STR6236_TEXT": "Manufacturer ID (last four bytes)", + "STR6270_2_TEXT": "Overheat protection temperature", + "STR6271_TEXT": "Overheat protection switching diff", + "STR6272_TEXT": "Overheat protection sensor", + "STR6273_TEXT": "Overheat protection duration min.", + "STR6280_TEXT": "ConfigRg5 bit 0-7", + "STR6290_TEXT": "ConfigRg6 bit 0-7", + "STR6300_2_TEXT": "Info 1 OEM", + "STR6310_TEXT": "ConfigRg8 bit 0-7", + "STR6355_TEXT": "Room controller heating circuit 1", + "STR6356_TEXT": "Room controller heating circuit 2", + "STR6357_TEXT": "Room controller heating circuit 3", + "STR6375_TEXT": "Relay output QX35", + "STR6420_TEXT": "Function input H33", + "STR6421_TEXT": "Effective direction contact H33", + "STR6486_TEXT": "Partial schematic heating circuit 1", + "STR6487_TEXT": "Partial schematic cooling circuit 1", + "STR6488_TEXT": "Partial schematic heating circuit 2", + "STR6489_TEXT": "Partial schematic heating circuit 3/P", + "STR6490_TEXT": "Partial schematic drinking water storage", + "STR6491_TEXT": "Partial schematic inverter", + "STR6492_TEXT": "Partial schematic H1", + "STR6493_TEXT": "Partial schematic H2", + "STR6494_TEXT": "Partial schematic solid fuel boiler", + "STR6495_TEXT": "Partial schematic oil/gas heating boiler", + "STR6496_TEXT": "Partial schematic swimming pool", + "STR6497_TEXT": "Partial schematic drinking water flow heater", + "STR6498_TEXT": "Partial schematic solar collector", + "STR6600_TEXT": "Device address", + "STR6601_TEXT": "Segment address", + "STR6606_TEXT": "LPB configuration 0", + "STR6610_TEXT": "Display system messages", + "STR6611_TEXT": "System message to alarm relay", + "STR6612_TEXT": "Alarm delay", + "STR6620_TEXT": "Effective range switching", + "STR6621_TEXT": "Summer switching", + "STR6624_TEXT": "Manual generator lock", + "STR6627_TEXT": "Cooling demand", + "STR6630_TEXT": "Cascade master", + "STR6631_TEXT": "External generators in eco mode", + "STR6632_TEXT": "Observe outside temperature limit for external generators", + "STR6650_TEXT": "Outside temperature supplier", + "STR6699_TEXT": "Software version insert", + "STR6710_TEXT": "Reset alarm relay", + "STR6711_TEXT": "Reset heat pump", + "STR6740_TEXT": "Flow temperature 1 alarm", + "STR6742_TEXT": "Flow temperature 3 alarm", + "STR6743_TEXT": "Boiler temperature alarm", + "STR6745_TEXT": "Drinking water loading alarm", + "STR6746_TEXT": "Flow temperature cooling 1 alarm", + "STR6747_TEXT": "Flow temperature cooling 2 alarm", + "STR6800_2_TEXT": "History 1", + "STR6801_2_TEXT": "History 1 error message", + "STR6805_2_TEXT": "SW diagnostic code 1", + "STR6806_2_TEXT": "FA phase 1", + "STR6810_2_TEXT": "History 2", + "STR6811_2_TEXT": "Error code 2", + "STR6813_2_TEXT": "History 2 error message", + "STR6815_2_TEXT": "SW diagnostic code 2", + "STR6816_2_TEXT": "FA phase 2", + "STR6820_2_TEXT": "History 3", + "STR6821_TEXT": "Error code 3", + "STR6823_2_TEXT": "History 3 error message", + "STR6831_TEXT": "Error code 4", + "STR6833_2_TEXT": "History 4 error message", + "STR6840_2_TEXT": "History 5", + "STR6843_2_TEXT": "History 5 error message", + "STR6855_TEXT": "SW diagnostic code 6", + "STR6856_TEXT": "FA phase 6", + "STR6865_TEXT": "SW diagnostic code 7", + "STR6866_TEXT": "FA phase 7", + "STR6875_TEXT": "SW diagnostic code 8", + "STR6876_TEXT": "FA phase 8", + "STR6885_TEXT": "SW diagnostic code 9", + "STR6886_TEXT": "FA phase 9", + "STR6895_TEXT": "SW diagnostic code 10", + "STR6896_TEXT": "FA phase 10", + "STR6905_TEXT": "SW diagnostic code 11", + "STR6906_TEXT": "FA phase 11", + "STR6915_TEXT": "SW diagnostic code 12", + "STR6916_TEXT": "FA phase 12", + "STR6925_TEXT": "SW diagnostic code 13", + "STR6926_TEXT": "FA phase 13", + "STR6935_TEXT": "SW diagnostic code 14", + "STR6936_TEXT": "FA phase 14", + "STR6945_TEXT": "SW diagnostic code 15", + "STR6946_TEXT": "FA phase 15", + "STR6955_TEXT": "SW diagnostic code 16", + "STR6956_TEXT": "FA phase 16", + "STR6965_TEXT": "SW diagnostic code 17", + "STR6966_TEXT": "FA phase 17", + "STR6975_TEXT": "SW diagnostic code 18", + "STR6976_TEXT": "FA phase 18", + "STR6985_TEXT": "SW diagnostic code 19", + "STR6986_TEXT": "FA phase 19", + "STR6995_TEXT": "SW diagnostic code 20", + "STR6996_TEXT": "FA phase 20", + "STR6800_TEXT": "History 1 date/time", + "STR6801_TEXT": "History 1 error code", + "STR6802_TEXT": "History 2 date/time", + "STR6803_TEXT": "History 2 error code", + "STR6804_TEXT": "History 3 date/time", + "STR6805_TEXT": "History 3 error code", + "STR6806_TEXT": "History 4 date/time", + "STR6807_TEXT": "History 4 error code", + "STR6808_TEXT": "History 5 date/time", + "STR6809_TEXT": "History 5 error code", + "STR6810_TEXT": "History 6 date/time", + "STR6811_TEXT": "History 6 error code", + "STR6812_TEXT": "History 7 date/time", + "STR6813_TEXT": "History 7 error code", + "STR6814_TEXT": "History 8 date/time", + "STR6815_TEXT": "History 8 error code", + "STR6816_TEXT": "History 9 date/time", + "STR6817_TEXT": "History 9 error code", + "STR6818_TEXT": "History 10 date/time", + "STR6819_TEXT": "History 10 error code", + "STR6900_TEXT": "History 11 date/time", + "STR6901_TEXT": "History 11 error code", + "STR6910_TEXT": "History 12 date/time", + "STR6911_TEXT": "History 12 error code", + "STR6920_TEXT": "History 13 date/time", + "STR6921_TEXT": "History 13 error code", + "STR6930_TEXT": "History 14 date/time", + "STR6931_TEXT": "History 14 error code", + "STR6940_TEXT": "History 15 date/time", + "STR6941_TEXT": "History 15 error code", + "STR6950_TEXT": "History 16 date/time", + "STR6951_TEXT": "History 16 error code", + "STR6960_TEXT": "History 17 date/time", + "STR6961_TEXT": "History 17 error code", + "STR6970_TEXT": "History 18 date/time", + "STR6971_TEXT": "History 18 error code", + "STR6980_TEXT": "History 19 date/time", + "STR6981_TEXT": "History 19 error code", + "STR6990_TEXT": "History 20 date/time", + "STR6991_TEXT": "History 20 error code", + "STR6820_TEXT": "Reset history", + "STR7012_TEXT": "Reset messages 1-6", + "STR7046_TEXT": "Limit for months since last maintenance", + "STR7053_TEXT": "Flue gas temperature limit", + "STR7054_TEXT": "Delay flue gas message", + "STR7056_TEXT": "DHW scalding risk", + "STR7070_TEXT": "HP time interval", + "STR7071_TEXT": "HP time since maintenance", + "STR7072_TEXT": "Max starts Verd1 / operating hour", + "STR7073_TEXT": "Current starts Verd1 / operating hour", + "STR7074_TEXT": "Max starts Verd2 / operating hour", + "STR7075_TEXT": "Current starts Verd2 / operating hour", + "STR7076_TEXT": "Spread condensate max / week", + "STR7077_TEXT": "Current spread condensate max / week", + "STR7078_TEXT": "Spread condensate min / week", + "STR7079_TEXT": "Current spread condensate min / week", + "STR7080_TEXT": "Spread evaporator max / week", + "STR7081_TEXT": "Current spread evaporator max / week", + "STR7082_TEXT": "Spread evaporator min / week", + "STR7083_TEXT": "Current spread evaporator min / week", + "STR7090_TEXT": "DHW storage time interval", + "STR7091_TEXT": "DHW storage since maintenance", + "STR7092_TEXT": "DHW loading temperature HP minimum", + "STR7093_TEXT": "Current DHW loading temperature HP", + "STR7119_TEXT": "Eco function", + "STR7120_TEXT": "Eco mode", + "STR7130_TEXT": "Chimney sweep function", + "STR7131_TEXT": "Chimney sweep function burner capacity", + "STR7140_TEXT": "Manual operation", + "STR7141_TEXT": "Emergency operation", + "STR7142_TEXT": "Emergency operation function start", + "STR7143_TEXT": "Controller stop function", + "STR7145_TEXT": "Controller stop target value", + "STR7146_TEXT": "Venting function", + "STR7147_TEXT": "Venting type", + "STR7150_TEXT": "Simulation outside temperature", + "STR7152_TEXT": "Trigger defrost", + "STR7153_TEXT": "Pump down refrigerant", + "STR7160_TEXT": "Reset limit times", + "STR7165_TEXT": "Heat removal force DHW", + "STR7166_TEXT": "Commissioning function", + "STR7170_TEXT": "Customer service phone", + "STR7181_TEXT": "Phone responsibility 1", + "STR7183_TEXT": "Phone responsibility 2", + "STR7230_TEXT": "Reset water refill", + "STR7231_TEXT": "Refill duration current week", + "STR7232_TEXT": "Total refill duration", + "STR7233_TEXT": "Number of refills total", + "STR7236_TEXT": "Minimum vacuum duration for refill", + "STR7237_TEXT": "Wait time for refill", + "STR7238_TEXT": "Maximum refill duration", + "STR7239_TEXT": "Maximum refill duration for the week", + "STR7240_TEXT": "Refill lockout time", + "STR7244_TEXT": "Pressure monitoring of water refill", + "STR7250_TEXT": "Programmer stick position", + "STR7251_TEXT": "Programmer stick dataset name", + "STR7252_TEXT": "Programmer stick command", + "STR7253_TEXT": "Programmer stick progress", + "STR7311_TEXT": "Function of input H2 Module 1", + "STR7386_TEXT": "Function of input H2 Module 2", + "STR7387_TEXT": "Wiring contact of H2 Module 2", + "STR7396_TEXT": "Function of input H21 Module 2", + "STR7399_TEXT": "Input value 1 of H21 Module 2", + "STR7400_TEXT": "Function value 1 of H21 Module 2", + "STR7401_TEXT": "Input value 2 of H21 Module 2", + "STR7402_TEXT": "Function value 2 of H21 Module 2", + "STR7423_TEXT": "Function of output UX21 Module 2", + "STR7425_TEXT": "Signal output of UX21 Module 2", + "STR7430_TEXT": "Function of output UX22 Module 2", + "STR7432_TEXT": "Signal output of UX22 Module 2", + "STR7700_TEXT": "Relay test", + "STR7705_TEXT": "Desired modulation value of QX3 relay test", + "STR7705_2_TEXT": "Desired modulation value of ZX4 relay test", + "STR7708_TEXT": "Modulation signal of QX3", + "STR7708_2_TEXT": "Modulation signal of ZX4", + "STR7710_TEXT": "Output test of UX1", + "STR7711_TEXT": "Voltage signal of UX1", + "STR7711_2_TEXT": "Output signal of UX1", + "STR7712_TEXT": "PWM signal of UX1", + "STR7713_TEXT": "Output test of P1", + "STR7714_TEXT": "PWM signal of P1", + "STR7716_TEXT": "Output test of UX2", + "STR7717_TEXT": "Output signal of UX2", + "STR7719_TEXT": "PWM signal of UX2", + "STR7720_TEXT": "Digital output test", + "STR7721_TEXT": "Digital output D01", + "STR7722_TEXT": "Cooling operation D2", + "STR7723_TEXT": "Heat pump D3", + "STR7724_TEXT": "Output test of UX3", + "STR7725_TEXT": "Voltage signal of U4 (Ux3)", + "STR7730_TEXT": "Outdoor temperature B9", + "STR7732_TEXT": "Flow temperature B1", + "STR7734_TEXT": "Flow temperature B12", + "STR7750_TEXT": "Drinking water temperature B3", + "STR7760_TEXT": "Boiler temperature B2", + "STR7770_TEXT": "Flow temperature of the heat pump B21", + "STR7771_TEXT": "Return temperature of the heat pump B71", + "STR7772_TEXT": "Flue gas temperature B81", + "STR7775_TEXT": "Source inlet temperature B91", + "STR7777_TEXT": "Sensor temperature B92, B84", + "STR7781_TEXT": "Output signal of UX21 module", + "STR7784_TEXT": "Output test of UX21 Module 2", + "STR7785_TEXT": "Output signal of UX21 Module 2", + "STR7785_2_TEXT": "Output signal of UX21 Module 2 PWM %", + "STR7786_TEXT": "Output test of UX22 Module 2", + "STR7787_TEXT": "Output signal of UX22 Module 2", + "STR7787_2_TEXT": "Output signal of UX22 Module 2 PWM %", + "STR7810_TEXT": "Sensor temperature BX7", + "STR7811_TEXT": "Sensor temperature BX8", + "STR7812_TEXT": "Sensor temperature BX9", + "STR7813_TEXT": "Sensor temperature BX10", + "STR7814_TEXT": "Sensor temperature BX11", + "STR7815_TEXT": "Sensor temperature BX12", + "STR7816_TEXT": "Sensor temperature BX13", + "STR7817_TEXT": "Sensor temperature BX14", + "STR7809_TEXT": "Sensor temperature BX6", + "STR7820_TEXT": "Sensor temperature BX1", + "STR7821_TEXT": "Sensor temperature BX2", + "STR7822_TEXT": "Sensor temperature BX3", + "STR7823_TEXT": "Sensor temperature BX4", + "STR7824_TEXT": "Sensor temperature BX5", + "STR7830_TEXT": "Sensor temperature BX21 Module 1", + "STR7831_TEXT": "Sensor temperature BX22 Module 1", + "STR7832_TEXT": "Sensor temperature BX21 Module 2", + "STR7833_TEXT": "Sensor temperature BX22 Module 2", + "STR7840_TEXT": "Voltage signal H1", + "STR7841_TEXT": "Contact status H1", + "STR7844_TEXT": "Input signal H1", + "STR7845_TEXT": "Voltage signal H2", + "STR7846_TEXT": "Contact status H2", + "STR7847_TEXT": "Status of contact H2, Module 2", + "STR7848_TEXT": "Contact status H2 Module 2", + "STR7849_TEXT": "Contact status H2 Module 2 - Parameter", + "STR7854_TEXT": "Voltage signal H3", + "STR7855_TEXT": "Contact status H3", + "STR7858_TEXT": "Input signal H3", + "STR7860_TEXT": "Contact status H4", + "STR7865_TEXT": "Contact status H5", + "STR7870_TEXT": "Burner malfunction S3", + "STR7872_TEXT": "Contact status H6", + "STR7881_TEXT": "1st burner stage E1", + "STR7884_TEXT": "STB error message L1", + "STR7889_TEXT": "Low-pressure guard E9", + "STR7890_TEXT": "High-pressure guard E10", + "STR7891_TEXT": "Winding protection compression 1 E11", + "STR7911_TEXT": "Input EX1", + "STR7912_TEXT": "Input EX2", + "STR7913_TEXT": "Input EX3", + "STR7914_TEXT": "Input EX4", + "STR7915_TEXT": "Input EX5", + "STR7916_TEXT": "Input EX6", + "STR7917_TEXT": "Input EX7", + "STR7919_TEXT": "Input EX9", + "STR7945_TEXT": "Input EX10", + "STR7946_TEXT": "Input EX11", + "STR7950_TEXT": "Input EX01 Module 1", + "STR7951_TEXT": "Input EX01 Module 2", + "STR7952_TEXT": "Input EX01 Module 3", + "STR7973_TEXT": "Sensor temperature BX31", + "STR7974_TEXT": "Sensor temperature BX32", + "STR7975_TEXT": "Sensor temperature BX33", + "STR7976_TEXT": "Sensor temperature BX34", + "STR7977_TEXT": "Sensor temperature BX35", + "STR7978_TEXT": "Sensor temperature BX36", + "STR7996_TEXT": "Contact status H33", + "STR7999_TEXT": "Input signal H33", + "STR8002_TEXT": "Heating circuit P status", + "STR8006_TEXT": "Heat pump status", + "STR8008_TEXT": "Solid fuel boiler status", + "STR8009_TEXT": "Burner status", + "STR8010_TEXT": "Buffer storage status", + "STR8011_TEXT": "Swimming pool status", + "STR8022_TEXT": "Auxiliary heater status", + "STR8023_TEXT": "Sitherm Pro status", + "STR8025_TEXT": "Cooling circuit 2 status", + "STR8050_TEXT": "Timestamp of status history 1", + "STR8051_TEXT": "Status code of status history 1", + "STR8052_TEXT": "Timestamp of status history 2", + "STR8053_TEXT": "Status code of status history 2", + "STR8054_TEXT": "Timestamp of status history 3", + "STR8055_TEXT": "Status code of status history 3", + "STR8056_TEXT": "Timestamp of status history 4", + "STR8057_TEXT": "Status code of status history 4", + "STR8058_TEXT": "Timestamp of status history 5", + "STR8059_TEXT": "Status code of status history 5", + "STR8060_TEXT": "Timestamp of status history 6", + "STR8061_TEXT": "Status code of status history 6", + "STR8062_TEXT": "Timestamp of status history 7", + "STR8063_TEXT": "Status code of status history 7", + "STR8064_TEXT": "Timestamp of status history 8", + "STR8065_TEXT": "Status code of status history 8", + "STR8066_TEXT": "Timestamp of status history 9", + "STR8067_TEXT": "Status code of status history 10", + "STR8068_TEXT": "Timestamp of status history 10", + "STR8099_TEXT": "Status on the main display", + "STR8100_TEXT": "Priority / status of generator 1", + "STR8102_TEXT": "Priority / status of generator 2", + "STR8104_TEXT": "Priority / status of generator 3", + "STR8106_TEXT": "Priority / status of generator 4", + "STR8108_TEXT": "Priority / status of generator 5", + "STR8110_TEXT": "Priority / status of generator 6", + "STR8112_TEXT": "Priority / status of generator 7", + "STR8114_TEXT": "Priority / status of generator 8", + "STR8116_TEXT": "Priority / status of generator 9", + "STR8118_TEXT": "Priority / status of generator 10", + "STR8120_TEXT": "Priority / status of generator 11", + "STR8122_TEXT": "Priority / status of generator 12", + "STR8124_TEXT": "Priority / status of generator 13", + "STR8126_TEXT": "Priority / status of generator 14", + "STR8128_TEXT": "Priority / status of generator 15", + "STR8130_TEXT": "Priority / status of generator 16", + "STR8138_TEXT": "Cascade flow temperature", + "STR8139_TEXT": "Cascade flow setpoint", + "STR8140_TEXT": "Cascade return temperature", + "STR8141_TEXT": "Cascade return setpoint", + "STR8150_TEXT": "Current switching of the generator sequence", + "STR8199_TEXT": "Cascade status", + "STR8317_TEXT": "Switching point for DHW operation", + "STR8321_2_TEXT": "Primary heat exchanger temperature", + "STR8325_2_TEXT": "Current fan control", + "STR8400_TEXT": "Compressor 1 K1", + "STR8401_TEXT": "Compressor 2 K2", + "STR8402_TEXT": "Electric heater flow", + "STR8403_TEXT": "Electric heater flow 2", + "STR8404_TEXT": "Source pump Q8 / Valve K19", + "STR8405_TEXT": "Source pump speed", + "STR8406_TEXT": "Condenser pump Q9", + "STR8407_TEXT": "Condenser pump speed", + "STR8408_TEXT": "Cooling bypass valve", + "STR8410_TEXT": "Return temperature of the heat pump", + "STR8411_TEXT": "Setpoint of the heat pump", + "STR8412_TEXT": "Flow temperature of the heat pump", + "STR8413_TEXT": "Compressor modulation", + "STR8414_TEXT": "Electric flow modulation", + "STR8415_TEXT": "Flue gas temperature 1", + "STR8416_TEXT": "Maximum flue gas temperature", + "STR8417_TEXT": "Flue gas temperature 2", + "STR8420_TEXT": "Refrigerant temperature liquid", + "STR8423_TEXT": "Condenser temperature", + "STR8424_TEXT": "Condensing pressure", + "STR8425_TEXT": "Temperature difference in the condenser", + "STR8426_TEXT": "Temperature difference in the evaporator", + "STR8427_TEXT": "Source inlet temperature", + "STR8428_TEXT": "Source inlet minimum", + "STR8429_TEXT": "Source outlet temperature", + "STR8430_TEXT": "Source outlet minimum", + "STR8431_TEXT": "Source intermediate circuit flow temperature", + "STR8432_TEXT": "Source intermediate circuit return temperature", + "STR8434_TEXT": "Suction gas temperature", + "STR8435_TEXT": "Evaporating temperature", + "STR8435_1_TEXT": "Evaporating pressure", + "STR8436_TEXT": "Superheat setpoint", + "STR8436_1_TEXT": "Superheat", + "STR8437_TEXT": "Expansion valve", + "STR8438_TEXT": "Solenoid valve", + "STR8440_TEXT": "Remaining stage 1 standby time minimum", + "STR8441_TEXT": "Remaining stage 2 standby time minimum", + "STR8442_TEXT": "Remaining stage 1 running time minimum", + "STR8443_TEXT": "Remaining stage 2 running time minimum", + "STR8444_TEXT": "Remaining time limit for source inlet temperature minimum", + "STR8446_TEXT": "Compressor sequence", + "STR8448_TEXT": "Operating hours with increased evaporator temperature", + "STR8449_TEXT": "Operating hours of the refrigeration circuit", + "STR8450_TEXT": "Operating hours of compressor 1", + "STR8451_TEXT": "Start counter of compressor 1", + "STR8452_TEXT": "Operating hours of compressor 2", + "STR8453_TEXT": "Start counter of compressor 2", + "STR8454_TEXT": "Lockout duration of the heat pump", + "STR8455_TEXT": "Counter for number of heat pump lockouts", + "STR8456_TEXT": "Operating hours of electric flow heater", + "STR8457_TEXT": "Start counter of electric flow heater", + "STR8458_TEXT": "Smart Grid status", + "STR8460_TEXT": "Heat pump flow rate", + "STR8461_TEXT": "Source flow rate", + "STR8462_TEXT": "Suction gas temperature EVI", + "STR8463_TEXT": "Evaporating temperature EVI", + "STR8464_TEXT": "Superheat EVI", + "STR8465_TEXT": "Expansion valve EVI", + "STR8466_TEXT": "Solenoid valve EVI", + "STR8467_TEXT": "Solenoid valve injection capillary", + "STR8469_TEXT": "Fan speed", + "STR8470_TEXT": "Fan K19", + "STR8471_TEXT": "Process reversing valve", + "STR8475_TEXT": "Evaporator temperature", + "STR8477_TEXT": "Temperature difference defrost actual value", + "STR8478_TEXT": "Temperature difference defrost setpoint", + "STR8480_TEXT": "Remaining time defrost lockout", + "STR8481_TEXT": "Remaining time forced defrost", + "STR8482_TEXT": "Remaining time defrost stabilization", + "STR8485_TEXT": "Number of defrost attempts", + "STR8487_TEXT": "Defrost status of the heat pump", + "STR8488_TEXT": "Relative humidity of air inlet", + "STR8499_TEXT": "Status of the collector pump (Q5)", + "STR8499_2_TEXT": "Collector pump 1", + "STR8501_TEXT": "Solar actuator buffer", + "STR8502_TEXT": "Solar actuator swimming pool", + "STR8505_TEXT": "Speed of collector pump 1", + "STR8506_TEXT": "Speed of external heat exchanger solar pump", + "STR8507_TEXT": "Speed of solar buffer pump", + "STR8508_TEXT": "Speed of solar swimming pool pump", + "STR8511_TEXT": "Collector temperature 1 maximum", + "STR8512_TEXT": "Collector temperature 1 minimum", + "STR8513_TEXT": "Temperature difference collector 1 / DHW", + "STR8513_2_TEXT": "Temperature difference collector 1 / heat exchanger 1", + "STR8514_TEXT": "Temperature difference collector 1 / buffer", + "STR8515_TEXT": "Temperature difference collector 1 / swimming pool", + "STR8519_TEXT": "Solar flow temperature", + "STR8520_TEXT": "Solar return temperature", + "STR8521_TEXT": "Solar flow rate", + "STR8526_TEXT": "Daily solar energy yield", + "STR8527_TEXT": "Total solar energy yield", + "STR8531_TEXT": "Operating hours of collector overheat protection", + "STR8532_TEXT": "Operating hours of collector pump", + "STR8543_TEXT": "Speed of collector pump 2", + "STR8547_TEXT": "Collector temperature 2", + "STR8548_TEXT": "Collector temperature 2 maximum", + "STR8549_TEXT": "Collector temperature 2 minimum", + "STR8550_TEXT": "Temperature difference collector 2 / DHW", + "STR8551_TEXT": "Temperature difference collector 2 / buffer", + "STR8552_TEXT": "Temperature difference collector 2 / swimming pool", + "STR8559_TEXT": "Solid fuel boiler setpoint", + "STR8560_TEXT": "Solid fuel boiler temperature", + "STR8568_TEXT": "Speed of solid fuel pump", + "STR8570_TEXT": "Operating hours of solid fuel boiler", + "STR8586_TEXT": "Auxiliary heater setpoint", + "STR8701_TEXT": "Outdoor temperature minimum", + "STR8702_TEXT": "Outdoor temperature maximum", + "STR8705_TEXT": "Outdoor temperature LPB", + "STR8720_TEXT": "Relative humidity of the room", + "STR8721_TEXT": "Room temperature", + "STR8722_TEXT": "Dew point temperature", + "STR8730_TEXT": "Heating circuit pump Q2", + "STR8731_TEXT": "Heating circuit mixer on Y1", + "STR8732_TEXT": "Heating circuit mixer off Y2", + "STR8735_TEXT": "Speed of heating circuit pump 1", + "STR8742_TEXT": "Room temperature 1 model", + "STR8749_TEXT": "Room thermostat 1", + "STR8751_TEXT": "Cooling circuit pump Q24", + "STR8752_TEXT": "Cooling circuit mixer on Y23", + "STR8753_TEXT": "Cooling circuit mixer off Y24", + "STR8754_TEXT": "Bypass valve cooling Y21", + "STR8756_TEXT": "Flow temperature cooling 1", + "STR8757_TEXT": "Flow setpoint cooling 1", + "STR8760_TEXT": "Heating circuit pump 2", + "STR8761_TEXT": "Heating circuit mixer 2 on", + "STR8762_TEXT": "Heating circuit mixer 2 off", + "STR8765_TEXT": "Speed of heating circuit pump 2", + "STR8772_TEXT": "Room temperature 2 model", + "STR8779_TEXT": "Room thermostat 2", + "STR8790_TEXT": "Heating circuit pump 3/P", + "STR8791_TEXT": "Heating circuit mixer 3/P on", + "STR8792_TEXT": "Heating circuit mixer 3/P off", + "STR8795_TEXT": "Speed of heating circuit pump 3/P", + "STR8800_TEXT": "Room temperature 3/P", + "STR8801_TEXT": "Room setpoint 3/P", + "STR8802_TEXT": "Room temperature 3/P model", + "STR8803_TEXT": "Flow temperature 3/P", + "STR8804_TEXT": "Flow setpoint 3/P", + "STR8809_TEXT": "Room thermostat 3/P", + "STR8820_TEXT": "Drinking water pump Q3", + "STR8821_TEXT": "Electric heater DHW K6", + "STR8825_TEXT": "Speed of drinking water pump", + "STR8826_TEXT": "Speed of DHW intermediate circuit pump", + "STR8827_TEXT": "Speed of continuous flow heater pump", + "STR8832_TEXT": "Drinking water temperature 2", + "STR8835_TEXT": "DHW circulation temperature", + "STR8837_TEXT": "DHW charging setpoint", + "STR8840_TEXT": "Operating hours of DHW pump", + "STR8841_TEXT": "Start counter of DHW pump", + "STR8842_TEXT": "Operating hours of electric DHW heater", + "STR8843_TEXT": "Start counter of electric DHW heater", + "STR8850_TEXT": "DHW pre-control temperature", + "STR8851_TEXT": "DHW pre-control setpoint", + "STR8852_TEXT": "DHW flow heater temperature", + "STR8853_TEXT": "DHW flow heater setpoint", + "STR8860_TEXT": "Drinking water flow rate", + "STR8875_TEXT": "Flow setpoint VK1", + "STR8885_TEXT": "Flow setpoint VK2", + "STR8895_TEXT": "Flow setpoint swimming pool", + "STR8900_TEXT": "Swimming pool temperature", + "STR8901_TEXT": "Swimming pool setpoint", + "STR8930_TEXT": "Pre-control temperature", + "STR8931_TEXT": "Pre-control setpoint", + "STR8951_TEXT": "Rail flow setpoint", + "STR8956_TEXT": "Rail flow temperature 2", + "STR8957_TEXT": "Rail flow setpoint cooling", + "STR8962_TEXT": "Power setpoint rail", + "STR8970_TEXT": "Electric heater buffer", + "STR8981_TEXT": "Buffer storage setpoint", + "STR8982_TEXT": "Buffer storage temperature 2", + "STR8983_TEXT": "Buffer storage temperature 3", + "STR8984_TEXT": "Buffer storage setpoint reset?", + "STR8990_TEXT": "Operating hours of electric buffer heater", + "STR8991_TEXT": "Start counter of electric buffer heater", + "STR9000_TEXT": "Flow setpoint H1", + "STR9001_TEXT": "Flow setpoint H2", + "STR9004_TEXT": "Flow setpoint H3", + "STR9005_TEXT": "Water pressure H1", + "STR9006_TEXT": "Water pressure H2", + "STR9009_TEXT": "Water pressure H3", + "STR9010_TEXT": "Measurement of room temperature 1", + "STR9011_TEXT": "Measurement of room temperature 2", + "STR9012_TEXT": "Measurement of room temperature 3", + "STR9016_TEXT": "Special temperature 1", + "STR9017_TEXT": "Special temperature 2", + "STR9037_TEXT": "Relay output QX7", + "STR9038_TEXT": "Relay output QX8", + "STR9039_TEXT": "Relay output QX9", + "STR9040_TEXT": "Relay output QX10", + "STR9041_TEXT": "Relay output QX11", + "STR9042_TEXT": "Relay output QX12", + "STR9043_TEXT": "Relay output QX13", + "STR9056_TEXT": "Relay output QX21 Module 3", + "STR9057_TEXT": "Relay output QX22 Module 3", + "STR9058_TEXT": "Relay output QX23 Module 3", + "STR9071_TEXT": "Relay output QX31", + "STR9072_TEXT": "Relay output QX32", + "STR9073_TEXT": "Relay output QX33", + "STR9074_TEXT": "Relay output QX34", + "STR9075_TEXT": "Relay output QX35", + "STR9501_TEXT": "Minimum pre-ventilation time", + "STR9504_2_TEXT": "Target power pre-ventilation", + "STR9505_TEXT": "Target speed pre-ventilation min", + "STR9506_TEXT": "Speed tolerance pre-ventilation", + "STR9512_2_TEXT": "Target power ignition load", + "STR9513_TEXT": "Maximum target speed ignition", + "STR9514_TEXT": "Speed tolerance ignition", + "STR9517_TEXT": "Pre-ignition time", + "STR9518_TEXT": "Safety time", + "STR9519_TEXT": "Safety time with ignition", + "STR9523_TEXT": "Target speed operation", + "STR9524_2_TEXT": "Target power part load", + "STR9526_TEXT": "Speed tolerance part load", + "STR9529_TEXT": "Target power full load", + "STR9529_2_TEXT": "Target speed full load", + "STR9530_TEXT": "Maximum target speed full load", + "STR9531_TEXT": "Speed tolerance full load", + "STR9534_TEXT": "Operating time with ignition load", + "STR9541_TEXT": "Maximum post-ventilation time", + "STR9542_TEXT": "Minimum post-ventilation time", + "STR9545_TEXT": "Post-ventilation in fault position", + "STR9550_TEXT": "Fan control standstill", + "STR9551_TEXT": "Maximum target speed standstill", + "STR9610_TEXT": "Power range", + "STR9611_TEXT": "LP configuration", + "STR9612_TEXT": "GP configuration", + "STR9614_TEXT": "Post-ventilation level", + "STR9615_TEXT": "Forced pre-ventilation in case of fault", + "STR9616_TEXT": "Maximum speed", + "STR9617_TEXT": "Hall sensor pulses/revolution", + "STR9618_TEXT": "Ionization current level stray light", + "STR9619_TEXT": "Ionization current level flame out", + "STR9626_TEXT": "Fan power/speed increase", + "STR9627_TEXT": "Fan power/speed Y-section", + "STR9630_TEXT": "Speed proportionality coefficient Kp", + "STR9631_TEXT": "Speed readjustment time Tn", + "STR9632_TEXT": "Speed holding time Tv", + "STR9650_TEXT": "Chimney drying", + "STR9651_TEXT": "Maximum target speed standstill", + "STR9652_TEXT": "Duration chimney drying", + "STR10000_TEXT": "Room temperature 1", + "STR10101_TEXT": "INFO Drinking water preparation", + "STR10102_TEXT": "INFO HK1 - TBD", + "STR10103_TEXT": "INFO HK2 - TBD", + "STR10104_TEXT": "INFO HK3/P - TBD", + "STR10200_TEXT": "Unknown command", + "STR15001_TEXT": "Presence button", + "STR15002_TEXT": "Knob position", + "STR15003_TEXT": "Remaining vacation days", + "STR15034_TEXT": "Mixer pre-run temperature", + "STR15035_TEXT": "Target temperature", + "STR15040_TEXT": "Time", + "STR15041_TEXT": "Day of the week", + "STR15042_TEXT": "Next switching program", + "STR15043_TEXT": "Manual heating", + "STR15045_TEXT": "Connection interrupted", + "STR15046_TEXT": "QAA model", + "STR15050_TEXT": "Time switch program Monday", + "STR15056_TEXT": "Time switch program Tuesday", + "STR15062_TEXT": "Time switch program Wednesday", + "STR15068_TEXT": "Time switch program Thursday", + "STR15074_TEXT": "Time switch program Friday", + "STR15080_TEXT": "Time switch program Saturday", + "STR15086_TEXT": "Time switch program Sunday", + "STR20100_TEXT": "DHT22 sensor ID", + "STR20101_TEXT": "DHT22 sensor temperature", + "STR20102_TEXT": "DHT22 sensor humidity", + "STR20103_TEXT": "DHT22 sensor abs. Humidity", + "STR20200_TEXT": "BME280 sensor ID", + "STR20201_TEXT": "BME280 sensor temperature", + "STR20202_TEXT": "BME280 sensor humidity", + "STR20203_TEXT": "BME280 sensor pressure", + "STR20204_TEXT": "BME280 sensor altitude", + "STR20205_TEXT": "BME280 sensor abs. Humidity", + "STR20300_TEXT": "DS18B20 sensor ID", + "STR20301_TEXT": "DS18B20 sensor temperature", + "STR20500_TEXT": "MAX! Sensor ID", + "STR20501_TEXT": "MAX! Sensor actual temperature", + "STR20502_TEXT": "MAX! Sensor target temperature", + "STR20503_TEXT": "MAX! Sensor valve opening", + "STR20700_TEXT": "custom_float", + "STR20800_TEXT": "custom_long", + "STR99999_TEXT": "UNKNOWN command code", + "ENUM_DEBUG_SERIAL_TEXT": "Serial", + "ENUM_DEBUG_TELNET_TEXT": "Telnet", + "ENUM_MQTT_PLAIN_TEXT": "Plain text", + "ENUM_MQTT_JSON_TEXT": "JSON", + "ENUM_MQTT_JSON2_TEXT": "Rich JSON", + "ENUM20_01_TEXT": "English", + "ENUM20_02_TEXT": "German", + "ENUM20_03_TEXT": "French", + "ENUM20_04_TEXT": "Dutch", + "ENUM20_05_TEXT": "Italian", + "ENUM20_06_TEXT": "Spanish", + "ENUM20_07_TEXT": "Polish", + "ENUM20_08_TEXT": "Czech", + "ENUM22_01_TEXT": "Temporary", + "ENUM22_02_TEXT": "Permanent", + "ENUM23_00_TEXT": "Code", + "ENUM23_01_TEXT": "Code and text", + "ENUM28_01_TEXT": "Save automatically", + "ENUM28_02_TEXT": "Save with confirmation", + "ENUM29_01_TEXT": "°C, bar", + "ENUM29_02_TEXT": "°F, PSI", + "ENUM40_00_TEXT": "Room device 1", + "ENUM40_01_TEXT": "Room device 2", + "ENUM40_02_TEXT": "Room device P", + "ENUM40_03_TEXT": "Control device 1", + "ENUM40_04_TEXT": "Control device 2", + "ENUM40_05_TEXT": "Service device", + "ENUM42_01_TEXT": "Heating circuit 1 and 2", + "ENUM42_02_TEXT": "Heating circuit 1 and P", + "ENUM42_03_TEXT": "All heating circuits", + "ENUM44_01_TEXT": "Together with HK1", + "ENUM44_02_TEXT": "Independent", + "ENUM47_02_TEXT": "For all assigned heating circuits", + "ENUM48_00_TEXT": "None", + "ENUM48_03_TEXT": "Together", + "ENUM130_00_TEXT": "Missing", + "ENUM130_01_TEXT": "In operation", + "ENUM130_02_TEXT": "No reception", + "ENUM130_03_TEXT": "Change battery", + "ENUM648_00_TEXT": "Frost protection", + "ENUM648_01_TEXT": "Reduced", + "ENUM700_00_TEXT": "Protection mode", + "ENUM700_01_TEXT": "Automatic", + "ENUM700_03_TEXT": "Comfort", + "ENUM702_00_TEXT": "Summer operation", + "ENUM702_01_TEXT": "Heating program 1", + "ENUM702_02_TEXT": "Economy program", + "ENUM702_03_TEXT": "Normal program", + "ENUM702_04_TEXT": "Unknown", + "ENUM702_05_TEXT": "Heating program 2", + "ENUM702_06_TEXT": "Heating program 3", + "ENUM703_00_TEXT": "Present", + "ENUM703_01_TEXT": "Absent", + "ENUM780_01_TEXT": "Up to reduced target value", + "ENUM780_02_TEXT": "Up to frost protection target value", + "ENUM832_00_TEXT": "2-point", + "ENUM832_01_TEXT": "3-point", + "ENUM850_01_TEXT": "Functional heating", + "ENUM850_02_TEXT": "Occupancy heating", + "ENUM850_03_TEXT": "Functional/occupancy heating", + "ENUM850_04_TEXT": "Occupancy/functional heating", + "ENUM850_05_TEXT": "Manual", + "ENUM861_01_TEXT": "Heating mode", + "ENUM861_02_TEXT": "Always", + "ENUM880_00_TEXT": "Operating level", + "ENUM880_01_TEXT": "Characteristic curve", + "ENUM880_02_TEXT": "Temperature lift nominal", + "ENUM1600_02_TEXT": "Eco", + "ENUM1602_00_02_TEXT": "DHW push not active", + "ENUM1602_02_02_TEXT": "DHW push active", + "ENUM1602_00_04_TEXT": "DHW off", + "ENUM1602_04_04_TEXT": "DHW on", + "ENUM1602_00_08_TEXT": "DHW charging not active", + "ENUM1602_08_08_TEXT": "DHW charging active", + "ENUM1620_00_TEXT": "24h/day", + "ENUM1620_01_TEXT": "Time programs heating circuits", + "ENUM1620_02_TEXT": "Time program 4/DHW", + "ENUM1620_3_01_TEXT": "All time programs HK/DHW", + "ENUM1620_3_03_TEXT": "Low tariff", + "ENUM1620_3_04_TEXT": "Time prog 4/DHW or NT", + "ENUM1630_00_TEXT": "Absolute", + "ENUM1630_01_TEXT": "Sliding", + "ENUM1630_02_TEXT": "None", + "ENUM1630_03_TEXT": "MK sliding PK absolute", + "ENUM1640_01_TEXT": "Periodic", + "ENUM1640_02_TEXT": "Fixed weekday", + "ENUM1660_02_TEXT": "Drinking water release", + "ENUM2150_00_TEXT": "From buffer storage", + "ENUM2150_01_TEXT": "To buffer storage", + "ENUM2200_00_TEXT": "Continuous operation", + "ENUM2200_02_TEXT": "Auto, extended runtime", + "ENUM2205_01_TEXT": "One drinking water", + "ENUM2206_00_TEXT": "Operation", + "ENUM2206_01_TEXT": "Standby", + "ENUM2291_00_TEXT": "Parallel burner operation", + "ENUM2291_01_TEXT": "Return temperature", + "ENUM2305_00_TEXT": "Heating mode only", + "ENUM2305_01_TEXT": "Heating and drinking water mode", + "ENUM2320_01_TEXT": "Demand", + "ENUM2320_02_TEXT": "Boiler target value", + "ENUM2320_04_TEXT": "Burner output", + "ENUM2450_02_TEXT": "Drinking water mode only", + "ENUM2476_ff_TEXT": "Locked", + "ENUM2480_00_TEXT": "Start prevention", + "ENUM2480_ff_TEXT": "Fault position", + "ENUM2706_00_TEXT": "Locked", + "ENUM2706_01_TEXT": "Stepper motor test mode", + "ENUM2706_02_TEXT": "Start manual drift test", + "ENUM2706_04_TEXT": "Initialization", + "ENUM2706_05_TEXT": "Ignition", + "ENUM2706_06_TEXT": "Cold start detection", + "ENUM2706_07_TEXT": "Approach control", + "ENUM2706_08_TEXT": "Stabilization", + "ENUM2706_09_TEXT": "Controls", + "ENUM2706_0a_TEXT": "Exotic gas operation", + "ENUM2706_0b_TEXT": "Drift test active", + "ENUM2706_0c_TEXT": "Drift test due", + "ENUM2706_0d_TEXT": "Drift test overdue", + "ENUM2706_12_TEXT": "ADA interval 1 to 3 due", + "ENUM2721_01_TEXT": "Natural gas", + "ENUM2721_02_TEXT": "LPG", + "ENUM2727_01_TEXT": "Range 1", + "ENUM2727_02_TEXT": "Range 2", + "ENUM2727_03_TEXT": "Range 3", + "ENUM2740_01_TEXT": "All points", + "ENUM2740_02_TEXT": "All due points", + "ENUM2740_03_TEXT": "Point 1", + "ENUM2740_04_TEXT": "Point 2", + "ENUM2740_05_TEXT": "Point 3", + "ENUM2740_06_TEXT": "Point 4", + "ENUM2740_07_TEXT": "Point 5", + "ENUM2740_08_TEXT": "Point 6", + "ENUM2740_09_TEXT": "Point 7", + "ENUM2749_01_TEXT": "New electrode", + "ENUM2749_02_TEXT": "Used electrode", + "ENUM2790_01_TEXT": "Heat pump target value", + "ENUM2801_02_TEXT": "Temperature request", + "ENUM2801_03_TEXT": "Parallel compressor operation", + "ENUM2880_02_TEXT": "Supplementary operation HK", + "ENUM2880_03_TEXT": "Supplement DHW", + "ENUM2880_04_TEXT": "Supplement HK+DHW", + "ENUM2880_05_TEXT": "End DHW charging", + "ENUM2900_01_TEXT": "R134A", + "ENUM2900_02_TEXT": "R236FA", + "ENUM2900_03_TEXT": "R290", + "ENUM2900_04_TEXT": "R404A", + "ENUM2900_05_TEXT": "R407A", + "ENUM2900_06_TEXT": "R407B", + "ENUM2900_07_TEXT": "R407C", + "ENUM2900_08_TEXT": "R410A", + "ENUM2900_09_TEXT": "R410B", + "ENUM2900_10_TEXT": "R413A", + "ENUM2900_11_TEXT": "R417A", + "ENUM2900_12_TEXT": "R422A", + "ENUM2900_13_TEXT": "R422D", + "ENUM2900_14_TEXT": "R427A", + "ENUM2900_15_TEXT": "R507A", + "ENUM2900_16_TEXT": "R600", + "ENUM2900_17_TEXT": "R600A", + "ENUM2900_18_TEXT": "R744", + "ENUM2900_19_TEXT": "R1270", + "ENUM2903_02_TEXT": "Energy price", + "ENUM2903_03_TEXT": "COP and energy price", + "ENUM2903_04_TEXT": "COP or energy price", + "ENUM2908_00_TEXT": "Ignore", + "ENUM2920_01_TEXT": "Released", + "ENUM2922_01_TEXT": "Cool down", + "ENUM2922_02_TEXT": "Switch-on lock and cool down", + "ENUM2941_01_TEXT": "Passive cooling", + "ENUM2941_02_TEXT": "Active and passive cooling", + "ENUM3007_00_TEXT": "Condensate pump off", + "ENUM3007_01_TEXT": "Condensate pump on", + "ENUM3009_01_TEXT": "Compressor output", + "ENUM3030_01_TEXT": "Now", + "ENUM3030_02_TEXT": "After pump run-up", + "ENUM3033_00_TEXT": "Not corrected", + "ENUM3033_01_TEXT": "Manually corrected", + "ENUM3033_02_TEXT": "Automatically corrected", + "ENUM3033_03_TEXT": "Correction running", + "ENUM3090_00_TEXT": "None (with input)", + "ENUM3092_00_TEXT": "kWh", + "ENUM3095_01_TEXT": "With input H1", + "ENUM3095_02_TEXT": "With input H2 module 1", + "ENUM3095_03_TEXT": "With input H2 module 2", + "ENUM3095_04_TEXT": "With input H2 module 3", + "ENUM3095_05_TEXT": "With input H21 module 1", + "ENUM3095_06_TEXT": "With input H21 module 2", + "ENUM3095_07_TEXT": "With input H21 module 3", + "ENUM3095_08_TEXT": "With input H22 module 1", + "ENUM3095_09_TEXT": "With input H22 module 2", + "ENUM3095_0a_TEXT": "With input H22 module 3", + "ENUM3095_0b_TEXT": "With input H3", + "ENUM3095_0c_TEXT": "With input H31", + "ENUM3095_0d_TEXT": "With input H32", + "ENUM3102_02_TEXT": "m3", + "ENUM3109_01_TEXT": "Heat output", + "ENUM3109_02_TEXT": "Energy input", + "ENUM3109_03_TEXT": "Both", + "ENUM3510_01_TEXT": "Late on, early off", + "ENUM3510_02_TEXT": "Late on, late off", + "ENUM3510_03_TEXT": "Early on, late off", + "ENUM3541_01_TEXT": "First", + "ENUM3541_02_TEXT": "Last", + "ENUM3541_03_TEXT": "First and last", + "ENUM3544_01_TEXT": "Generator 1", + "ENUM3544_02_TEXT": "Generator 2", + "ENUM3544_03_TEXT": "Generator 3", + "ENUM3544_04_TEXT": "Generator 4", + "ENUM3544_05_TEXT": "Generator 5", + "ENUM3544_06_TEXT": "Generator 6", + "ENUM3544_07_TEXT": "Generator 7", + "ENUM3544_08_TEXT": "Generator 8", + "ENUM3544_09_TEXT": "Generator 9", + "ENUM3544_0a_TEXT": "Generator 10", + "ENUM3544_0b_TEXT": "Generator 11", + "ENUM3544_0c_TEXT": "Generator 12", + "ENUM3544_0d_TEXT": "Generator 13", + "ENUM3544_0e_TEXT": "Generator 14", + "ENUM3544_0f_TEXT": "Generator 15", + "ENUM3544_10_TEXT": "Generator 16", + "ENUM3692_00_TEXT": "Locked", + "ENUM3692_01_TEXT": "Replacement", + "ENUM3692_02_TEXT": "Supplement", + "ENUM3692_03_TEXT": "Immediately", + "ENUM3692_04_TEXT": "First", + "ENUM3692_05_TEXT": "Alone", + "ENUM3694_00_TEXT": "Ingnore", + "ENUM3694_01_TEXT": "Observe", + "ENUM3725_01_TEXT": "Rail pre-run temperature", + "ENUM3725_02_TEXT": "Buffer storage sensor B4", + "ENUM3750_00_TEXT": "Other", + "ENUM3750_01_TEXT": "Solid fuel boiler", + "ENUM3750_02_TEXT": "Heat pump", + "ENUM3750_03_TEXT": "Oil/gas boiler", + "ENUM3880_02_TEXT": "Ethylene glycol", + "ENUM3880_03_TEXT": "Propylene glycol", + "ENUM3880_04_TEXT": "Ethylene and propylene glycol", + "ENUM3887_03_TEXT": "Liter", + "ENUM4133_01_TEXT": "Drinking water sensor B3", + "ENUM4133_02_TEXT": "Drinking water sensor B31", + "ENUM4133_03_TEXT": "Buffer storage sensor B4", + "ENUM4133_04_TEXT": "Buffer storage sensor B41", + "ENUM4133_05_TEXT": "Flow target value", + "ENUM4133_06_TEXT": "Minimum target value", + "ENUM4134_01_TEXT": "With B3", + "ENUM4134_02_TEXT": "With B31", + "ENUM4134_03_TEXT": "With B3 and B31", + "ENUM4135_01_TEXT": "Storage temperature", + "ENUM4135_02_TEXT": "Storage target value", + "ENUM4135_03_TEXT": "Minimum boiler target value", + "ENUM4137_01_TEXT": "With B4", + "ENUM4137_02_TEXT": "With B42/41", + "ENUM4137_03_TEXT": "With B4 and B42/41", + "ENUM4192_00_TEXT": "Once", + "ENUM4192_01_TEXT": "Multiple", + "ENUM4720_01_TEXT": "With B4", + "ENUM4720_02_TEXT": "With B4 and B42/41", + "ENUM4757_01_TEXT": "Summer", + "ENUM4795_02_TEXT": "With B41", + "ENUM4795_03_TEXT": "With B42", + "ENUM4796_01_TEXT": "Temperature reduction", + "ENUM4796_02_TEXT": "Temperature increase", + "ENUM4813_02_TEXT": "With B42/B41", + "ENUM5010_00_TEXT": "Once/day", + "ENUM5010_ff_TEXT": "Multiple/day", + "ENUM5013_01_TEXT": "Current target value", + "ENUM5013_02_TEXT": "Nominal target value", + "ENUM5016_02_TEXT": "Legionella function target value", + "ENUM5022_02_TEXT": "With B3/B31", + "ENUM5022_03_TEXT": "With B3, Legio B3/31", + "ENUM5022_2_01_TEXT": "Recharge", + "ENUM5022_2_02_TEXT": "Charge", + "ENUM5022_2_03_TEXT": "Charge Legio", + "ENUM5022_2_04_TEXT": "Charge 1st load", + "ENUM5022_2_05_TEXT": "Charge Legio and 1st load", + "ENUM5040_02_TEXT": "Automatic", + "ENUM5060_01_TEXT": "Replacement", + "ENUM5060_04_TEXT": "Cooling mode", + "ENUM5062_01_TEXT": "External thermostat", + "ENUM5062_02_TEXT": "Drinking water sensor", + "ENUM5130_01_TEXT": "Hot water release", + "ENUM5573_13_TEXT": "Primary heat exchanger sensor B26", + "ENUM5573_16_TEXT": "Solar sensor external heat exchanger B62", + "ENUM5573_18_TEXT": "Drinking water sensor B3", + "ENUM5573_1b_TEXT": "Outdoor temperature sensor B9", + "ENUM5573_1c_TEXT": "Pre-control sensor B15", + "ENUM5573_1d_TEXT": "Room sensor B5", + "ENUM5573_1e_TEXT": "Room sensor B52", + "ENUM5573_1f_TEXT": "Room sensor B53", + "ENUM5573_20_TEXT": "Flow temperature sensor HK1 B1", + "ENUM5573_21_TEXT": "Flow temperature sensor HK2 B12", + "ENUM5573_22_TEXT": "Flow temperature sensor HK3 B14", + "ENUM5700_01_TEXT": "Pre-setting 1: 1 heating circuit with or without heating resistor and with or without DHW.", + "ENUM5700_02_TEXT": "Pre-setting 2: 2 heating circuits with or without heating resistor and with or without DHW.", + "ENUM5700_03_TEXT": "Pre-setting 3: Takeover from heating boiler, 1 heating circuit with or without DHW.", + "ENUM5700_04_TEXT": "Pre-setting 4: Takeover from heating boiler, 2 heating circuits with or without DHW.", + "ENUM5700_05_TEXT": "Not used", + "ENUM5711_01_TEXT": "4-wire system", + "ENUM5711_02_TEXT": "2-wire system", + "ENUM5712_01_TEXT": "Heating", + "ENUM5712_02_TEXT": "Cooling", + "ENUM5712_03_TEXT": "Heating+cooling", + "ENUM5715_01_TEXT": "Cooling wire system", + "ENUM5715_03_TEXT": "2-wire cooling system", + "ENUM5730_00_TEXT": "Sensor", + "ENUM5730_01_TEXT": "Thermostat", + "ENUM5730_2_01_TEXT": "Drinking water sensor B3", + "ENUM5730_2_03_TEXT": "Drinking water sensor B38", + "ENUM5731_00_TEXT": "none", + "ENUM5731_01_TEXT": "Charge pump", + "ENUM5731_02_TEXT": "Diversion valve", + "ENUM5734_00_TEXT": "Last request", + "ENUM5734_01_TEXT": "Heating circuit", + "ENUM5737_00_TEXT": "Position one DHW", + "ENUM5737_FF_TEXT": "Position one heating circuit", + "ENUM5760_00_TEXT": "Before buffer storage", + "ENUM5761_01_01_TEXT": "Zones with supply pump", + "ENUM5761_02_02_TEXT": "HK1 with supply pump", + "ENUM5761_04_04_TEXT": "HK2 with supply pump", + "ENUM5761_08_08_TEXT": "DHW with supply pump", + "ENUM5770_00_TEXT": "No generator or PPS-BMU", + "ENUM5770_01_TEXT": "1-stage", + "ENUM5770_02_TEXT": "2-stage", + "ENUM5770_03_TEXT": "Modulating 3-point air flap drive", + "ENUM5770_04_TEXT": "Modulating 2-point air flap drive", + "ENUM5770_05_TEXT": "Cascade (two 1-stage burners)", + "ENUM5774_00_TEXT": "All requests", + "ENUM5774_ff_TEXT": "Only request HK1/DHW", + "ENUM5806_01_TEXT": "3-stage", + "ENUM5806_02_TEXT": "2-stage exclusive", + "ENUM5806_03_TEXT": "2-stage supplementary", + "ENUM5806_04_TEXT": "Modulating UX", + "ENUM5890_01_TEXT": "Circulation pump Q4", + "ENUM5890_02_TEXT": "Electric insert DHW K6", + "ENUM5890_03_TEXT": "Collector pump Q5", + "ENUM5890_04_TEXT": "H1 pump Q15", + "ENUM5890_05_TEXT": "Boiler pump Q1", + "ENUM5890_06_TEXT": "Bypass pump Q12", + "ENUM5890_07_TEXT": "Alarm output K10", + "ENUM5890_08_TEXT": "2nd pump stage HK1 Q21", + "ENUM5890_09_TEXT": "2nd pump stage HK2 Q22", + "ENUM5890_0a_TEXT": "2nd pump stage HKP Q23", + "ENUM5890_0b_TEXT": "Heating circuit pump HKP Q20", + "ENUM5890_0c_TEXT": "H2 pump Q18", + "ENUM5890_0d_TEXT": "Supply pump Q14", + "ENUM5890_0e_TEXT": "Generator shut-off valve Y4", + "ENUM5890_0f_TEXT": "Solid fuel boiler pump Q10", + "ENUM5890_10_TEXT": "Time program 5 K13", + "ENUM5890_11_TEXT": "Buffer return valve Y15", + "ENUM5890_12_TEXT": "Solar pump external heat exchanger K9", + "ENUM5890_13_TEXT": "Solar control element buffer K8", + "ENUM5890_14_TEXT": "Solar control element swimming pool K18", + "ENUM5890_15_TEXT": "Collector pump 2 Q16", + "ENUM5890_16_TEXT": "H3 pump Q19", + "ENUM5890_17_TEXT": "Exhaust gas relay K17", + "ENUM5890_18_TEXT": "Ignition aid fan K30", + "ENUM5890_19_TEXT": "Cascade pump Q25", + "ENUM5890_1a_TEXT": "Storage transfer pump Q11", + "ENUM5890_1b_TEXT": "DHW mixing pump Q35", + "ENUM5890_1c_TEXT": "DHW intermediate circuit pump Q33", + "ENUM5890_1d_TEXT": "Heat demand K27", + "ENUM5890_1e_TEXT": "Cooling demand K28", + "ENUM5890_21_TEXT": "Heating circuit pump HK1 Q2", + "ENUM5890_22_TEXT": "Heating circuit pump HK2 Q6", + "ENUM5890_24_TEXT": "Thru-flow heater control element Q34", + "ENUM5890_26_TEXT": "Water refill K34", + "ENUM5890_27_TEXT": "2nd boiler pump stage Q27", + "ENUM5890_28_TEXT": "Message output K35", + "ENUM5890_29_TEXT": "Operation message K36", + "ENUM5890_2a_TEXT": "Exhaust gas flap K37", + "ENUM5890_2b_TEXT": "Fan shut-off K38", + "ENUM5890_2d_TEXT": "dT controller 1 K21", + "ENUM5890_2e_TEXT": "dT controller 2 K22", + "ENUM5890_2_00_TEXT": "No function", + "ENUM5890_2_01_TEXT": "Heating circuit pump 2", + "ENUM5890_2_02_TEXT": "Supply pump after BW", + "ENUM5890_2_03_TEXT": "Supply pump before BW", + "ENUM5890_2_04_TEXT": "Supply pump with external request", + "ENUM5890_2_05_TEXT": "Drinking water circulation pump", + "ENUM5890_2_06_TEXT": "Domestic water electric heater", + "ENUM5890_2_07_TEXT": "Solar pump", + "ENUM5890_2_08_TEXT": "H1 pump", + "ENUM5890_2_09_TEXT": "Boiler pump", + "ENUM5890_2_0a_TEXT": "Boiler bypass pump", + "ENUM5890_2_0b_TEXT": "Alarm output", + "ENUM5895_02_TEXT": "Drinking water actuator Q3", + "ENUM5895_03_TEXT": "Compressor stage 2 K2", + "ENUM5895_04_TEXT": "Process reversing valve Y22", + "ENUM5895_05_TEXT": "Hot gas temperature K31", + "ENUM5895_06_TEXT": "Electric heater 1 flow K25", + "ENUM5895_07_TEXT": "Electric heater 2 flow K26", + "ENUM5895_08_TEXT": "Diversion valve cooling source Y28", + "ENUM5895_0b_TEXT": "Electric heater buffer K16", + "ENUM5895_11_TEXT": "2nd pump stage HK1 Q21", + "ENUM5895_12_TEXT": "2nd pump stage HK2 Q22", + "ENUM5895_13_TEXT": "2nd pump stage HKP Q23", + "ENUM5895_1a_TEXT": "Solar pump external heat exchanger", + "ENUM5895_20_TEXT": "Diversion valve cooling Y21", + "ENUM5895_22_TEXT": "Source pump Q8", + "ENUM5895_23_TEXT": "Fan K19", + "ENUM5895_24_TEXT": "Condenser pump Q9", + "ENUM5895_25_TEXT": "Dehumidifier K29", + "ENUM5895_2b_TEXT": "Cooling request K28", + "ENUM5895_2c_TEXT": "Compressor stage 1 K1", + "ENUM5895_2d_TEXT": "Auxiliary generator control K32", + "ENUM5920_00_TEXT": "Default, no function", + "ENUM5920_01_TEXT": "Message output", + "ENUM5920_03_TEXT": "Operation message", + "ENUM5920_04_TEXT": "External transformer", + "ENUM5920_05_TEXT": "Heating circuit pump HK2 (Q2Y2)", + "ENUM5920_06_TEXT": "Circulation pump", + "ENUM5920_07_TEXT": "Gate curtain function", + "ENUM5920_08_TEXT": "Pump hydraulic diverter", + "ENUM5920_09_TEXT": "Feeder pump Q8", + "ENUM5920_0a_TEXT": "Basic function K2", + "ENUM5920_0b_TEXT": "Drinking water recharge", + "ENUM5920_0c_TEXT": "Threshold analog signal", + "ENUM5920_0d_TEXT": "Exhaust flap", + "ENUM5920_0e_TEXT": "Collector pump", + "ENUM5920_0f_TEXT": "Blower shutdown", + "ENUM5920_10_TEXT": "Pump Q1", + "ENUM5930_02_TEXT": "Collector sensor B6", + "ENUM5930_03_TEXT": "Return sensor B7", + "ENUM5930_04_TEXT": "DHW circulation sensor B39", + "ENUM5930_07_TEXT": "Exhaust temperature sensor B8", + "ENUM5930_08_TEXT": "Rail pre-run sensor B10", + "ENUM5930_09_TEXT": "Solid fuel boiler sensor B22", + "ENUM5930_0a_TEXT": "DHW charging sensor B36", + "ENUM5930_0b_TEXT": "Buffer storage sensor B42", + "ENUM5930_0c_TEXT": "Rail return sensor B73", + "ENUM5930_0d_TEXT": "Cascade return sensor B70", + "ENUM5930_0e_TEXT": "Swimming pool sensor B13", + "ENUM5930_0f_TEXT": "Collector sensor 2 B61", + "ENUM5930_10_TEXT": "Solar pre-run sensor B63", + "ENUM5930_11_TEXT": "Solar return sensor B64", + "ENUM5950_01_TEXT": "BA switchover HK+DHW", + "ENUM5950_02_TEXT": "BA switchover HK", + "ENUM5950_03_TEXT": "BA switchover HK1", + "ENUM5950_04_TEXT": "BA switchover HK2", + "ENUM5950_05_TEXT": "BA switchover HKP", + "ENUM5950_06_TEXT": "Generator lock", + "ENUM5950_07_TEXT": "Error/alarm message", + "ENUM5950_08_TEXT": "Minimum desired flow temperature", + "ENUM5950_09_TEXT": "Overheat diversion", + "ENUM5950_0a_TEXT": "Swimming pool release", + "ENUM5950_0b_TEXT": "Dew point guard", + "ENUM5950_0c_TEXT": "Desired flow temperature increase hygro", + "ENUM5950_0d_TEXT": "Heat request 10V", + "ENUM5950_0e_TEXT": "Pressure measurement 10V", + "ENUM5950_2_01_TEXT": "Modem function", + "ENUM5950_2_02_TEXT": "Inverted modem function", + "ENUM5950_2_07_TEXT": "Feedback exhaust flap", + "ENUM5950_2_09_TEXT": "Inverted generator lock", + "ENUM5950_3_01_TEXT": "BA switchover HK+DHW", + "ENUM5950_4_01_TEXT": "BA switchover HK+DHW", + "ENUM5950_4_02_TEXT": "BA switchover DHW", + "ENUM5950_4_06_TEXT": "BA switchover HK3", + "ENUM5950_4_09_TEXT": "Consumer request VK1", + "ENUM5950_4_0a_TEXT": "Consumer request VK2", + "ENUM5950_4_0b_TEXT": "Swimming pool generator release", + "ENUM5950_4_0d_TEXT": "Swimming pool solar generator release", + "ENUM5950_4_0e_TEXT": "Operating level DHW", + "ENUM5950_4_0f_TEXT": "Operating level HK1", + "ENUM5950_4_10_TEXT": "Operating level HK2", + "ENUM5950_4_11_TEXT": "Operating level HK3", + "ENUM5950_4_12_TEXT": "Room thermostat HK1", + "ENUM5950_4_13_TEXT": "Room thermostat HK2", + "ENUM5950_4_14_TEXT": "Room thermostat HK3", + "ENUM5950_4_15_TEXT": "DHW flow switch", + "ENUM5950_4_16_TEXT": "Drinking water thermostat", + "ENUM5950_4_17_TEXT": "Circulation pump thermostat", + "ENUM5950_4_18_TEXT": "Impulse counting", + "ENUM5950_4_1c_TEXT": "Feedback exhaust flap", + "ENUM5950_4_1e_TEXT": "Boiler return thermostat", + "ENUM5950_4_1f_TEXT": "Boiler flow switch", + "ENUM5950_4_20_TEXT": "Boiler pressure switch", + "ENUM5950_4_32_TEXT": "Flow measurement Hz", + "ENUM5950_4_33_TEXT": "Consumer request VK1 10V", + "ENUM5950_4_34_TEXT": "Consumer request VK2 10V", + "ENUM5950_4_36_TEXT": "Pressure measurement 10V", + "ENUM5950_4_38_TEXT": "Room temperature 10V", + "ENUM5950_5_01_TEXT": "BA switchover HK+DHW", + "ENUM5950_5_0d_TEXT": "Cooling request", + "ENUM5950_5_0f_TEXT": "Cooling request 10V", + "ENUM5950_5_11_TEXT": "Relative room humidity 10V", + "ENUM5950_6_00_TEXT": "BA switchover HK+DHW", + "ENUM5950_6_01_TEXT": "BA switchover all HK", + "ENUM5950_6_02_TEXT": "Minimum desired flow temperature (TVHw)", + "ENUM5950_6_03_TEXT": "Heat generator lock", + "ENUM5950_6_04_TEXT": "Heat request 0-10V", + "ENUM5950_7_00_TEXT": "Default", + "ENUM5951_00_TEXT": "Rest contact", + "ENUM5951_01_TEXT": "Work contact", + "ENUM5957_01_TEXT": "In all heating circuits and drinking water", + "ENUM5957_02_TEXT": "In all heating circuits", + "ENUM5957_03_TEXT": "In heating circuit 1", + "ENUM5957_04_TEXT": "In heating circuit 2", + "ENUM5957_2_02_TEXT": "Minimum desired flow temperature (TVHw)", + "ENUM5957_2_04_TEXT": "Heat request 0...10 V", + "ENUM5960_3_00_TEXT": "Domestic water temperature sensor 2", + "ENUM5960_3_01_TEXT": "Minimum desired flow temperature (TVHw)", + "ENUM5960_3_03_TEXT": "Buffer temperature sensor 2", + "ENUM5960_4_00_TEXT": "Analog H1", + "ENUM5970_01_TEXT": "Room thermostat", + "ENUM5970_02_TEXT": "Timer room level", + "ENUM5970_03_TEXT": "Timer heating request", + "ENUM5970_04_TEXT": "Timer DHW level", + "ENUM5973_04_TEXT": "Setpoint specification", + "ENUM5973_05_TEXT": "Power specification", + "ENUM5973_06_TEXT": "Sensor hydraulic diverter", + "ENUM5973_0b_TEXT": "Generator lock sensor", + "ENUM5978_0a_TEXT": "Collector sensor", + "ENUM5980_01_TEXT": "EWS lock E6", + "ENUM5980_02_TEXT": "Low tariff E5", + "ENUM5980_03_TEXT": "Source overload E14", + "ENUM5980_04_TEXT": "Pressure guard source E26", + "ENUM5980_05_TEXT": "Flow guard source E15", + "ENUM5980_06_TEXT": "Flow guard consumer E24", + "ENUM5980_07_TEXT": "Manual defrost E17", + "ENUM5980_08_TEXT": "Collective fault WP E20", + "ENUM5980_09_TEXT": "Fault soft starter E25", + "ENUM5980_0a_TEXT": "Low-pressure guard E9", + "ENUM5980_0b_TEXT": "High-pressure guard E10", + "ENUM5980_0c_TEXT": "Compressor overload 1 E11", + "ENUM5980_10_TEXT": "Power monitoring E21", + "ENUM5980_11_TEXT": "Defrost pressure difference E28", + "ENUM5980_12_TEXT": "Pressure source intermediate circuit E29", + "ENUM5980_13_TEXT": "Flow source intermediate circuit E30", + "ENUM5980_14_TEXT": "Smart Grid E61", + "ENUM5980_15_TEXT": "Smart Grid E62", + "ENUM5980_1a_TEXT": "Drinking water push", + "ENUM5982_01_TEXT": "Counter 2nd burner stage", + "ENUM5982_04_TEXT": "STB error message", + "ENUM5988_0e_TEXT": "Three-phase E21", + "ENUM5988_0f_TEXT": "Three-phase E22", + "ENUM5988_10_TEXT": "Three-phase E23", + "ENUM6014_02_TEXT": "Return controller", + "ENUM6014_03_TEXT": "Pre-controller / feeder pump", + "ENUM6014_04_TEXT": "Drinking water pre-controller", + "ENUM6014_06_TEXT": "Return controller cascade", + "ENUM6020_01_TEXT": "Multifunctional", + "ENUM6020_04_TEXT": "Solar drinking water", + "ENUM6024_00_TEXT": "None", + "ENUM6024_19_TEXT": "Temperature guard HK", + "ENUM6030_06_TEXT": "Electric heater 1 flow K25", + "ENUM6030_07_TEXT": "Electric heater 2 flow K26", + "ENUM6030_1d_TEXT": "Solar actuator swimming pool K18", + "ENUM6030_24_TEXT": "Fan K19", + "ENUM6040_03_TEXT": "---", + "ENUM6070_01_TEXT": "Power request", + "ENUM6070_02_TEXT": "Heat request", + "ENUM6071_00_TEXT": "Standard", + "ENUM6071_01_TEXT": "Inverted", + "ENUM6085_02_TEXT": "Drinking water pump Q3", + "ENUM6085_05_TEXT": "Heating circuit pump HK2 Q6", + "ENUM6085_06_TEXT": "Heating circuit pump HK3 Q20", + "ENUM6097_01_TEXT": "NTC", + "ENUM6097_02_TEXT": "Pt 1000", + "ENUM6097_03_TEXT": "NTC 20k", + "ENUM6136_01_TEXT": "24/day", + "ENUM6136_02_TEXT": "Time program heating circuit", + "ENUM6230_00_01_TEXT": "Suppress return sensor interruption", + "ENUM6230_01_01_TEXT": "Output return sensor interruption", + "ENUM6230_00_02_TEXT": "Suppress drinking water sensor interruption", + "ENUM6230_02_02_TEXT": "Output drinking water sensor interruption", + "ENUM6230_00_04_TEXT": "Suppress exhaust temperature sensor interruption", + "ENUM6230_04_04_TEXT": "Output exhaust temperature sensor interruption", + "ENUM6230_00_08_TEXT": "Suppress outdoor temperature sensor interruption", + "ENUM6230_08_08_TEXT": "Output outdoor temperature sensor interruption", + "ENUM6230_00_10_TEXT": "Suppress water pressure sensor interruption", + "ENUM6230_10_10_TEXT": "Output water pressure sensor interruption", + "ENUM6230_00_20_TEXT": "Suppress flow sensor interruption", + "ENUM6230_20_20_TEXT": "Output flow sensor interruption", + "ENUM6230_00_40_TEXT": "Suppress sensor interruption at ClipIn", + "ENUM6230_40_40_TEXT": "Output sensor interruption at ClipIn", + "ENUM6240_00_03_TEXT": "Drinking water priority: absolute", + "ENUM6240_01_03_TEXT": "Drinking water priority: floating", + "ENUM6240_02_03_TEXT": "Drinking water priority: none", + "ENUM6240_00_04_TEXT": "Terminal assignment X10-02: RT", + "ENUM6240_04_04_TEXT": "Terminal assignment X10-02: Timer", + "ENUM6240_00_08_TEXT": "Terminal assignment X10-01: RT", + "ENUM6240_08_08_TEXT": "Terminal assignment X10-01: Timer", + "ENUM6240_00_10_TEXT": "Plant frost protection off", + "ENUM6240_10_10_TEXT": "Plant frost protection on", + "ENUM6240_00_20_TEXT": "Effect of timer on X10-01: heating circuit", + "ENUM6240_20_20_TEXT": "Effect of timer on X10-01: DHW", + "ENUM6240_00_80_TEXT": "Operating mode of the heating circuit with modem function: Standby", + "ENUM6240_80_80_TEXT": "Operating mode of the heating circuit with modem function: Reduced", + "ENUM6250_00_01_TEXT": "DHW pump run-on into the heating circuit", + "ENUM6250_01_01_TEXT": "DHW pump run-on into the DHW heat exchanger", + "ENUM6250_00_02_TEXT": "Comfort temperature level as outlet temperature", + "ENUM6250_02_02_TEXT": "Comfort temperature level as standby temperature", + "ENUM6250_00_0B_TEXT": "Comfort PID control sensor: boiler flow", + "ENUM6250_04_0B_TEXT": "Comfort PID control sensor: DHW sensor", + "ENUM6250_08_0B_TEXT": "Comfort PID control sensor: boiler return", + "ENUM6250_00_30_TEXT": "Sensor arrangement layer memory SSP: KVF", + "ENUM6250_10_30_TEXT": "Sensor arrangement layer memory SSP: KRF, not with SSP", + "ENUM6250_20_30_TEXT": "Sensor arrangement layer memory SSP: KRF, only SSP", + "ENUM6260_01_1F_TEXT": "AD converter inputs configuration 1", + "ENUM6260_02_1F_TEXT": "AD converter inputs configuration 2", + "ENUM6260_03_1F_TEXT": "AD converter inputs configuration 3", + "ENUM6260_04_1F_TEXT": "AD converter inputs configuration 4", + "ENUM6260_05_1F_TEXT": "AD converter inputs configuration 5", + "ENUM6260_06_1F_TEXT": "AD converter inputs configuration 6", + "ENUM6260_07_1F_TEXT": "AD converter inputs configuration 7", + "ENUM6260_00_20_TEXT": "AD converter heating request 1: as needed", + "ENUM6260_20_20_TEXT": "AD converter heating request 1: permanent", + "ENUM6260_00_40_TEXT": "AD converter heating request 2: as needed", + "ENUM6260_40_40_TEXT": "AD converter heating request 2: permanent", + "ENUM6260_00_80_TEXT": "AD converter heating request zone: as needed", + "ENUM6260_80_80_TEXT": "AD converter heating request zone: permanent", + "ENUM6270_00_01_TEXT": "Feeder function Q8: off", + "ENUM6270_01_01_TEXT": "Feeder function Q8: on", + "ENUM6270_00_02_TEXT": "Building construction: light", + "ENUM6270_02_02_TEXT": "Building construction: heavy", + "ENUM6270_00_04_TEXT": "Connection terminal DHW thermostat: sensor at X10/TWF", + "ENUM6270_04_04_TEXT": "Connection terminal DHW thermostat: thermostat at X10/TWF", + "ENUM6270_00_E0_TEXT": "Configuration 3-way valve: none", + "ENUM6270_20_E0_TEXT": "Configuration 3-way valve: solenoid valve", + "ENUM6270_40_E0_TEXT": "Configuration 3-way valve: motor valve", + "ENUM6270_60_E0_TEXT": "Configuration 3-way valve: inverted motor valve", + "ENUM6272_15_TEXT": "Boiler sensor B2", + "ENUM6280_00_03_TEXT": "Water shortage protection flow guard -> fault position", + "ENUM6280_01_03_TEXT": "Water shortage protection flow guard -> start prevention", + "ENUM6280_02_03_TEXT": "Water shortage protection pressure guard -> fault position", + "ENUM6280_03_03_TEXT": "Water shortage protection pressure guard -> start prevention", + "ENUM6280_00_04_TEXT": "Water shortage protection speed limit off", + "ENUM6280_04_04_TEXT": "Water shortage protection speed limit on", + "ENUM6280_00_F8_TEXT": "Bits 3-7: basic setting; do not change!", + "ENUM6290_00_01_TEXT": "Initialization ISR: immediate adoption of the control variable after release", + "ENUM6290_01_01_TEXT": "Initialization ISR: smooth transition after release", + "ENUM6290_00_02_TEXT": "Locking of foreign room units: off", + "ENUM6290_02_02_TEXT": "Locking of foreign room units: on", + "ENUM6290_00_04_TEXT": "Source DHW setpoint: RU", + "ENUM6290_04_04_TEXT": "Source DHW setpoint: HMI", + "ENUM6290_00_08_TEXT": "Lock signal calculation deactivated", + "ENUM6290_08_08_TEXT": "Lock signal calculation activated", + "ENUM6290_00_20_TEXT": "Fast changes of speed limits: normal execution", + "ENUM6290_20_20_TEXT": "Fast changes of speed limits: accelerated", + "ENUM6290_00_40_TEXT": "Initialization ISR: only when changing operating mode", + "ENUM6290_40_40_TEXT": "Initialization ISR: always when the burner starts", + "ENUM6290_00_80_TEXT": "PWM fan ramps: off", + "ENUM6290_80_80_TEXT": "PWM fan ramps: on", + "ENUM6300_00_01_TEXT": "Heating circuit pump: staged", + "ENUM6300_01_01_TEXT": "Heating circuit pump: modulating", + "ENUM6300_00_02_TEXT": "Delta-T limitation: off", + "ENUM6300_02_02_TEXT": "Delta-T limitation: on", + "ENUM6300_00_04_TEXT": "Delta-T monitoring: off", + "ENUM6300_04_04_TEXT": "Delta-T monitoring: on", + "ENUM6300_00_18_TEXT": "Plant volume: small", + "ENUM6300_08_18_TEXT": "Plant volume: medium", + "ENUM6300_10_18_TEXT": "Plant volume: large", + "ENUM6300_00_20_TEXT": "Delta-T monitoring in reduced operation: off", + "ENUM6300_20_20_TEXT": "Delta-T monitoring in reduced operation: on", + "ENUM6300_00_40_TEXT": "Controller delay: only active in heating mode", + "ENUM6300_40_40_TEXT": "Controller delay: active in all operating modes", + "ENUM6300_00_80_TEXT": "Pump Q1 modulation in systems 51,54,55,67,70,71: off", + "ENUM6300_80_80_TEXT": "Pump Q1 modulation in systems 51,54,55,67,70,71: on", + "ENUM6310_00_0F_TEXT": "Secondary heat exchanger: plate heat exchanger", + "ENUM6310_01_0F_TEXT": "Secondary heat exchanger: helical heat exchanger primary side", + "ENUM6310_02_0F_TEXT": "Secondary heat exchanger: helical heat exchanger secondary side", + "ENUM6310_00_10_TEXT": "1st maximum flow heater control: evaluate", + "ENUM6310_10_10_TEXT": "1st maximum flow heater control: ignore", + "ENUM6310_00_20_TEXT": "Flow heater request via DLH1 sensor or flow switch", + "ENUM6310_20_20_TEXT": "Flow heater request only via flow switch", + "ENUM6310_00_40_TEXT": "Position of distribution valve after flow heater: last", + "ENUM6310_40_40_TEXT": "Position of distribution valve after flow heater: heating position", + "ENUM6330_00_01_TEXT": "Boiler pump in burner lock: no shutdown", + "ENUM6330_01_01_TEXT": "Boiler pump in burner lock: shutdown", + "ENUM6330_00_02_TEXT": "Burner lock only with heating request", + "ENUM6330_02_02_TEXT": "Burner lock only with heating and DHW request", + "ENUM6330_00_04_TEXT": "Flow heater cycle protection by temperature increase: off", + "ENUM6330_04_04_TEXT": "Flow heater cycle protection by temperature increase: on", + "ENUM6330_00_08_TEXT": "Position of the DHW storage: before hydraulic diverter", + "ENUM6330_08_08_TEXT": "Position of the DHW store: after hydraulic diverter", + "ENUM6330_00_10_TEXT": "Feeder pump during burner cut-off: no shutdown", + "ENUM6330_10_10_TEXT": "Feeder pump during burner cut-off: shutdown", + "ENUM6330_00_20_TEXT": "Blower shutdown during heating demand: release", + "ENUM6330_20_20_TEXT": "Blower shutdown during heating demand: no release", + "ENUM6330_00_40_TEXT": "DHW pump overrun during further heat demands: suppress", + "ENUM6330_40_40_TEXT": "DHW pump overrun during further heat demands: execute", + "ENUM6375_11_TEXT": "Solar pump external heat exchanger K9", + "ENUM6375_15_TEXT": "Consumer circuit pump VK1 Q15", + "ENUM6375_16_TEXT": "Consumer circuit pump VK2 Q18", + "ENUM6375_17_TEXT": "Swimming pool pump Q19", + "ENUM6375_1b_TEXT": "2nd pump stage HK3 Q23", + "ENUM6375_1c_TEXT": "Diversion valve HK/HH1 Y21", + "ENUM6375_24_TEXT": "Source pump/ventilator K19", + "ENUM6375_27_TEXT": "Auxiliary generator control K32", + "ENUM6375_28_TEXT": "Unassigned", + "ENUM6375_2a_TEXT": "Thru-flow heater actuator Q34", + "ENUM6375_2d_TEXT": "Diversion valve HK/HH2 Y45", + "ENUM6375_2e_TEXT": "Diversion valve HK/HH3 Y46", + "ENUM6375_2f_TEXT": "Cooling circuit pump CC1 Q24", + "ENUM6375_30_TEXT": "Cooling circuit pump CC2 Q28", + "ENUM6375_31_TEXT": "Cooling circuit pump CC2 Q29", + "ENUM6375_34_TEXT": "Ignition aid fan K30", + "ENUM6375_35_TEXT": "Sump heater K40", + "ENUM6375_36_TEXT": "Drip tray heater K41", + "ENUM6375_37_TEXT": "Evaporator valve K81", + "ENUM6375_38_TEXT": "EVI valve K82", + "ENUM6375_39_TEXT": "Injection capillary valve K83", + "ENUM6375_3a_TEXT": "58", + "ENUM6375_3b_TEXT": "59", + "ENUM6375_3c_TEXT": "60", + "ENUM6420_01_TEXT": "Operating mode switch HHW+DHW", + "ENUM6420_02_TEXT": "Operating mode switch HHW", + "ENUM6420_03_TEXT": "Operating mode switch HHW1", + "ENUM6420_04_TEXT": "Operating mode switch HHW2", + "ENUM6420_05_TEXT": "Operating mode switch HWP", + "ENUM6420_0b_TEXT": "Operating mode switch swimming pool heating", + "ENUM6606_00_03_TEXT": "Time provider autonomous", + "ENUM6606_01_03_TEXT": "Time provider slave without remote adjustment", + "ENUM6606_02_03_TEXT": "Time provider slave with remote adjustment", + "ENUM6606_03_03_TEXT": "Time provider system time master", + "ENUM6606_00_04_TEXT": "Distributed bus power off", + "ENUM6606_04_04_TEXT": "Distributed bus power automatic", + "ENUM6606_00_08_TEXT": "Status bus power off", + "ENUM6606_08_08_TEXT": "Status bus power on", + "ENUM6606_00_10_TEXT": "Event behavior not permitted", + "ENUM6606_10_10_TEXT": "Event behavior permitted", + "ENUM6606_00_60_TEXT": "DHW allocation own controller", + "ENUM6606_20_60_TEXT": "DHW allocation all controllers segment", + "ENUM6606_40_60_TEXT": "DHW allocation all controllers composite", + "ENUM6606_00_80_TEXT": "Priority LMU request off", + "ENUM6606_80_80_TEXT": "Priority LMU request on", + "ENUM6620_00_TEXT": "Segment", + "ENUM6620_01_TEXT": "System", + "ENUM6621_00_TEXT": "Local", + "ENUM6621_01_TEXT": "Central", + "ENUM6625_00_TEXT": "Local heating circuits", + "ENUM6625_01_TEXT": "All heating circuits in the segment", + "ENUM6625_02_TEXT": "All heating circuits in the system", + "ENUM6640_00_TEXT": "Autonomous", + "ENUM6640_01_TEXT": "Slave without remote adjustment", + "ENUM6640_02_TEXT": "Slave with remote adjustment", + "ENUM6640_03_TEXT": "Master", + "ENUM6706_02_TEXT": "Blower start-up", + "ENUM6706_03_TEXT": "Pre-rinse time", + "ENUM6706_04_TEXT": "Waiting time", + "ENUM6706_05_TEXT": "Ignition phase", + "ENUM6706_06_TEXT": "Safety time constant", + "ENUM6706_07_TEXT": "Variable safety time", + "ENUM6706_0b_TEXT": "Hot water operation", + "ENUM6706_0c_TEXT": "Parallel operation of heating and hot water", + "ENUM6706_14_TEXT": "Post-ventilation with last operating control", + "ENUM6706_15_TEXT": "Post-ventilation with pre-air control", + "ENUM6706_16_TEXT": "Shutdown", + "ENUM7131_01_TEXT": "Part load", + "ENUM7131_02_TEXT": "Full load", + "ENUM7131_03_TEXT": "Maximum heating load", + "ENUM7147_01_TEXT": "Heating circuit continuous operation", + "ENUM7147_02_TEXT": "Pulsed heating circuit", + "ENUM7147_03_TEXT": "Drinking water continuous operation", + "ENUM7147_04_TEXT": "Pulsed drinking water", + "ENUM7244_01_TEXT": "With input H1", + "ENUM7244_02_TEXT": "With input H2 Module 1", + "ENUM7244_03_TEXT": "With input H2 Module 2", + "ENUM7244_04_TEXT": "With input H2 Module 3", + "ENUM7244_05_TEXT": "With input H3", + "ENUM7252_00_TEXT": "No operation", + "ENUM7252_01_TEXT": "Read from stick", + "ENUM7252_02_TEXT": "Write to stick", + "ENUM7376_04_TEXT": "Consumer circuit pump VK1 Q15", + "ENUM7425_00_TEXT": "0..10V", + "ENUM7425_01_TEXT": "PWM", + "ENUM7700_00_TEXT": "No test", + "ENUM7700_01_TEXT": "All off", + "ENUM7700_05_TEXT": "Heating circuit pump Q2", + "ENUM7700_06_TEXT": "Heating circuit mixer up Y1", + "ENUM7700_07_TEXT": "Heating circuit mixer down Y2", + "ENUM7700_08_TEXT": "Heating circuit pump Q6", + "ENUM7700_09_TEXT": "Heating circuit mixer up Y5", + "ENUM7700_0a_TEXT": "Heating circuit mixer down Y6", + "ENUM7700_0b_TEXT": "Relay output QX1", + "ENUM7700_0c_TEXT": "Relay output QX2", + "ENUM7700_0d_TEXT": "Relay output QX3", + "ENUM7700_0e_TEXT": "Relay output QX4", + "ENUM7700_0f_TEXT": "Relay output QX21 Module 1", + "ENUM7700_10_TEXT": "Relay output QX22 Module 1", + "ENUM7700_11_TEXT": "Relay output QX23 Module 1", + "ENUM7700_12_TEXT": "Relay output QX21 Module 2", + "ENUM7700_13_TEXT": "Relay output QX22 Module 2", + "ENUM7700_14_TEXT": "Relay output QX23 Module 2", + "ENUM7700_2_00_TEXT": "Regulated operation according to operating state", + "ENUM7700_2_01_TEXT": "All outputs off", + "ENUM7700_2_02_TEXT": "Burner stage 1 on K4", + "ENUM7700_2_03_TEXT": "Burner stages 1 and 2 on K4 / K5", + "ENUM7700_2_04_TEXT": "DHW charging pump on Q3 / Y3", + "ENUM7700_2_05_TEXT": "Heating circuit pump 1 / Q2", + "ENUM7700_2_06_TEXT": "Mixer 1 up Y1", + "ENUM7700_2_07_TEXT": "Mixer 2 down Y2", + "ENUM7700_2_08_TEXT": "Multifunctional output on K6", + "ENUM7700_2_09_TEXT": "Multifunctional output on K7", + "ENUM7999_01_TEXT": "Closed (ooo), Open (---)", + "ENUM7999_02_TEXT": "Pulse", + "ENUM7999_03_TEXT": "Frequency Hz", + "ENUM7999_04_TEXT": "Voltage V", + "ENUM8000_03_TEXT": "Monitor contacted", + "ENUM8000_04_TEXT": "Manual operation active", + "ENUM8000_11_TEXT": "After-run active", + "ENUM8000_16_TEXT": "Plant frost protection active", + "ENUM8000_17_TEXT": "Frost protection active", + "ENUM8000_38_TEXT": "Overheat protection active", + "ENUM8000_65_TEXT": "Room frost protection active", + "ENUM8000_66_TEXT": "Screed function active", + "ENUM8000_67_TEXT": "Restricted, boiler protection", + "ENUM8000_68_TEXT": "Restricted, DHW priority", + "ENUM8000_69_TEXT": "Restricted, buffer", + "ENUM8000_6a_TEXT": "Heating operation restricted", + "ENUM8000_6b_TEXT": "Forced discharge buffer", + "ENUM8000_6c_TEXT": "Forced discharge DHW", + "ENUM8000_6d_TEXT": "Forced discharge generator", + "ENUM8000_6e_TEXT": "Forced discharge", + "ENUM8000_6f_TEXT": "Switch-on optimization + quick heat-up", + "ENUM8000_70_TEXT": "Switch-on optimization", + "ENUM8000_71_TEXT": "Quick heat-up", + "ENUM8000_72_TEXT": "Heating comfort operation", + "ENUM8000_73_TEXT": "Switch-off optimization", + "ENUM8000_74_TEXT": "Heating operation reduced", + "ENUM8000_75_TEXT": "Flow frost protection active", + "ENUM8000_76_TEXT": "Summer operation", + "ENUM8000_77_TEXT": "Day eco active", + "ENUM8000_78_TEXT": "Reduction reduced", + "ENUM8000_79_TEXT": "Reduction frost protection", + "ENUM8000_7a_TEXT": "Room temperature limitation", + "ENUM8003_35_TEXT": "Cool-down active", + "ENUM8003_42_TEXT": "Charging electric heater", + "ENUM8003_43_TEXT": "Forced charging active", + "ENUM8003_45_TEXT": "Charging active", + "ENUM8003_46_TEXT": "Charged, max. storage temperature", + "ENUM8003_47_TEXT": "Charged, max. charging temperature", + "ENUM8003_4b_TEXT": "Charged", + "ENUM8003_4d_TEXT": "Cooling via collector", + "ENUM8003_4e_TEXT": "Cooling via generator/heating circuit", + "ENUM8003_4f_TEXT": "Discharge protection active", + "ENUM8003_50_TEXT": "Charging time limitation active", + "ENUM8003_51_TEXT": "Charging blocked", + "ENUM8003_52_TEXT": "Charging lock active", + "ENUM8003_53_TEXT": "Compulsion, max. storage temperature", + "ENUM8003_54_TEXT": "Compulsion, max. charging temperature", + "ENUM8003_55_TEXT": "Compulsion, Legionella setpoint", + "ENUM8003_56_TEXT": "Compulsion, rated setpoint", + "ENUM8003_57_TEXT": "Charging electric, Legionella setpoint", + "ENUM8003_58_TEXT": "Charging electric, rated setpoint", + "ENUM8003_59_TEXT": "Charging electric, reduced setpoint", + "ENUM8003_5a_TEXT": "Charging electric, frost protection setpoint", + "ENUM8003_5b_TEXT": "Electric heater released", + "ENUM8003_5c_TEXT": "Push, Legionella setpoint", + "ENUM8003_5d_TEXT": "Push, rated setpoint", + "ENUM8003_5e_TEXT": "Push active", + "ENUM8003_5f_TEXT": "Charging, Legionella setpoint", + "ENUM8003_60_TEXT": "Charging, rated setpoint", + "ENUM8003_61_TEXT": "Charging, reduced setpoint", + "ENUM8003_62_TEXT": "Charged, Legionella temperature", + "ENUM8003_63_TEXT": "Charged, nominal temperature", + "ENUM8003_64_TEXT": "Charged, reduced temperature", + "ENUM8003_c7_TEXT": "Draw-off operation", + "ENUM8003_c8_TEXT": "Ready", + "ENUM8003_c9_TEXT": "Standby charging", + "ENUM8005_01_TEXT": "STB contacted", + "ENUM8005_02_TEXT": "Fault", + "ENUM8005_05_TEXT": "Chimney sweep function, full load", + "ENUM8005_06_TEXT": "Chimney sweep function, part load", + "ENUM8005_07_TEXT": "Chimney sweep function active", + "ENUM8005_08_TEXT": "Locked, manual", + "ENUM8005_09_TEXT": "Locked, automatic", + "ENUM8005_0b_TEXT": "Starting relief", + "ENUM8005_0c_TEXT": "Starting relief, part load", + "ENUM8005_0d_TEXT": "Return limit", + "ENUM8005_0e_TEXT": "Return limit, part load", + "ENUM8005_10_TEXT": "Released, part load", + "ENUM8005_14_TEXT": "Minimum limit", + "ENUM8005_15_TEXT": "Minimum limit, part load", + "ENUM8005_16_TEXT": "Minimum limit active", + "ENUM8005_3b_TEXT": "Charging buffer storage", + "ENUM8005_7b_TEXT": "STB test active", + "ENUM8005_a6_TEXT": "In operation for heating circuit", + "ENUM8005_a7_TEXT": "In part-load operation for heating circuit", + "ENUM8005_a8_TEXT": "In operation for drinking water", + "ENUM8005_a9_TEXT": "In part-load operation for DHW", + "ENUM8005_aa_TEXT": "In operation for heating circuit, DHW", + "ENUM8005_ab_TEXT": "In part-load operation for heating circuit, DHW", + "ENUM8005_ac_TEXT": "Locked, solid fuel boiler", + "ENUM8005_ad_TEXT": "Released for heating circuit, DHW", + "ENUM8005_ae_TEXT": "Release for DHW", + "ENUM8005_af_TEXT": "Released for heating circuit", + "ENUM8005_b0_TEXT": "Locked, outdoor temperature", + "ENUM8005_c6_TEXT": "Locked, eco mode", + "ENUM8006_17_TEXT": "Plant frost protection active", + "ENUM8006_1b_TEXT": "Locked, external", + "ENUM8006_1d_TEXT": "HD in heat pump operation", + "ENUM8006_1e_TEXT": "Flow guard heat source", + "ENUM8006_1f_TEXT": "Pressure guard heat source", + "ENUM8006_20_TEXT": "Limit hot gas compressor 1", + "ENUM8006_21_TEXT": "Limit hot gas compressor 2", + "ENUM8006_22_TEXT": "Limit switch-off temperature max", + "ENUM8006_23_TEXT": "Compressor standstill time min active", + "ENUM8006_24_TEXT": "Compensation heat surplus", + "ENUM8006_25_TEXT": "Limit time active", + "ENUM8006_26_TEXT": "Compressor running time min active", + "ENUM8006_27_TEXT": "Compensation heat deficit", + "ENUM8006_28_TEXT": "Limit spread condenser max", + "ENUM8006_29_TEXT": "Limit spread condenser min", + "ENUM8006_2a_TEXT": "Limit spread evaporator max", + "ENUM8006_2b_TEXT": "Limit spread evaporator min", + "ENUM8006_2c_TEXT": "Compressor and electric on", + "ENUM8006_2d_TEXT": "Compressor 1 and 2 on", + "ENUM8006_2e_TEXT": "Compressor 1 on", + "ENUM8006_2f_TEXT": "Compressor 2 on", + "ENUM8006_30_TEXT": "Heat pump frost protection", + "ENUM8006_31_TEXT": "Flow active", + "ENUM8006_32_TEXT": "Released, Verd ready", + "ENUM8006_33_TEXT": "No request", + "ENUM8006_7d_TEXT": "Defrost active", + "ENUM8006_7e_TEXT": "Dripping", + "ENUM8006_7f_TEXT": "Active cooling operation", + "ENUM8006_80_TEXT": "Passive cooling operation", + "ENUM8006_81_TEXT": "Cooling evaporator", + "ENUM8006_82_TEXT": "Pre-heating for defrosting", + "ENUM8006_8b_TEXT": "Limit switch-off temperature min", + "ENUM8006_91_TEXT": "Limit outdoor temperature max cooling", + "ENUM8006_b4_TEXT": "Three-phase asymmetric", + "ENUM8006_b5_TEXT": "Low pressure", + "ENUM8006_b6_TEXT": "Fan overload", + "ENUM8006_b7_TEXT": "Compressor 1 overload", + "ENUM8006_b8_TEXT": "Compressor 2 overload", + "ENUM8006_b9_TEXT": "Source pump overload", + "ENUM8006_ba_TEXT": "Flow guard consumer", + "ENUM8006_bb_TEXT": "Deployment limit outdoor temperature min", + "ENUM8006_bc_TEXT": "Deployment limit outdoor temperature max", + "ENUM8006_bd_TEXT": "Limit source temperature min water", + "ENUM8006_be_TEXT": "Limit source temperature min brine", + "ENUM8006_bf_TEXT": "Limit source temperature max", + "ENUM8006_c0_TEXT": "Forced defrost compressor", + "ENUM8006_c1_TEXT": "Forced defrost fan", + "ENUM8006_c2_TEXT": "Defrost with compressor", + "ENUM8006_c3_TEXT": "Defrost with fan", + "ENUM8006_c4_TEXT": "Limit source temperature min cooling", + "ENUM8006_c5_TEXT": "Electric on", + "ENUM8006_cf_TEXT": "Compressor running time min active, cooling operation", + "ENUM8006_d0_TEXT": "Compressor 1 and 2 on, cooling operation", + "ENUM8006_d1_TEXT": "Compressor 1 on, cooling operation", + "ENUM8006_d2_TEXT": "Compressor 2 on, cooling operation", + "ENUM8006_eb_TEXT": "Water pressure too low", + "ENUM8006_f2_TEXT": "Layering active", + "ENUM8006_f6_TEXT": "Undervoltage", + "ENUM8006_fe_TEXT": "Refrigerant pump out, manual", + "ENUM8006_01_00_TEXT": "Refrigerant pump out", + "ENUM8006_01_01_TEXT": "Start delay defrost", + "ENUM8006_01_02_TEXT": "Compressor locked", + "ENUM8006_01_03_TEXT": "Locked, source temperature max", + "ENUM8006_01_04_TEXT": "Locked, source temperature min", + "ENUM8006_01_05_TEXT": "Locked, return temperature max", + "ENUM8006_01_06_TEXT": "Locked, return temperature min", + "ENUM8006_01_07_TEXT": "Locked, flow temperature max", + "ENUM8006_01_08_TEXT": "Locked, flow temperature min", + "ENUM8006_01_09_TEXT": "Locked, condenser temperature max", + "ENUM8006_01_0a_TEXT": "Locked, evaporator temperature min", + "ENUM8006_01_0b_TEXT": "Locked, hot gas temperature max", + "ENUM8006_01_0c_TEXT": "Limit evaporation temperature min", + "ENUM8006_01_0d_TEXT": "Limit condensation temperature max", + "ENUM8006_01_0e_TEXT": "Limit evaporation temperature max", + "ENUM8007_34_TEXT": "Collector frost protection active", + "ENUM8007_36_TEXT": "Max storage temperature reached", + "ENUM8007_37_TEXT": "Evaporation protection active", + "ENUM8007_39_TEXT": "Max charging temperature reached", + "ENUM8007_3a_TEXT": "Charging drinking water", + "ENUM8007_3c_TEXT": "Charging swimming pool", + "ENUM8007_3d_TEXT": "Min charging temperature not reached", + "ENUM8007_3e_TEXT": "Temperature difference insufficient", + "ENUM8007_3f_TEXT": "Insolation insufficient", + "ENUM8007_97_TEXT": "Charging DHW + buffer + swimming pool", + "ENUM8007_98_TEXT": "Charging drinking water + buffer", + "ENUM8007_99_TEXT": "Charging drinking water + swimming pool", + "ENUM8007_9a_TEXT": "Charging buffer + swimming pool", + "ENUM8008_0d_TEXT": "Return limit", + "ENUM8008_0e_TEXT": "Return limit, part load", + "ENUM8008_8d_TEXT": "Boiler frost protection active", + "ENUM8008_a3_TEXT": "Ignition aid active", + "ENUM8008_f1_TEXT": "Utilization of residual heat", + "ENUM8009_2_D6_TEXT": "Safety time", + "ENUM8009_2_DA_TEXT": "Pre-ventilation", + "ENUM8009_2_D7_TEXT": "Commissioning", + "ENUM8009_2_D9_TEXT": "Homestretch", + "ENUM8009_2_DB_TEXT": "Post-ventilation", + "ENUM8009_E0_TEXT": "Ignition", + "ENUM8009_E1_TEXT": "Settling time", + "ENUM8010_33_TEXT": "No heat demand", + "ENUM8010_40_TEXT": "Charging electric, emergency operation", + "ENUM8010_41_TEXT": "Charging electric, source pump protection", + "ENUM8010_44_TEXT": "Partial charging active", + "ENUM8010_48_TEXT": "Charged, forced charging target temperature", + "ENUM8010_49_TEXT": "Charged, target temperature", + "ENUM8010_4a_TEXT": "Partially charged, target temperature", + "ENUM8010_4c_TEXT": "Cold", + "ENUM8010_7c_TEXT": "Charging restricted", + "ENUM8010_83_TEXT": "Charging electric, defrosting", + "ENUM8010_87_TEXT": "Locking time after heating", + "ENUM8010_8e_TEXT": "Cooling via DHW/heating circuit", + "ENUM8010_8f_TEXT": "Charged, min charging temperature", + "ENUM8010_93_TEXT": "Warm", + "ENUM8010_a4_TEXT": "Charging electric, forced", + "ENUM8010_a5_TEXT": "Charging electric, replacement", + "ENUM8010_ca_TEXT": "Cooling frost protection active", + "ENUM8010_cb_TEXT": "Through-charging active", + "ENUM8010_f4_TEXT": "Generator released", + "ENUM8011_9b_TEXT": "Heating operation generator", + "ENUM8011_9c_TEXT": "Heated, max. swimming pool temperature", + "ENUM8011_9d_TEXT": "Heated, setpoint generator", + "ENUM8011_9e_TEXT": "Heated, setpoint solar", + "ENUM8011_9f_TEXT": "Heated", + "ENUM8011_a0_TEXT": "Heating operation solar off", + "ENUM8011_a1_TEXT": "Heating operation generator off", + "ENUM8011_a2_TEXT": "Heating operation off", + "ENUM8100_01_TEXT": "In fault", + "ENUM8100_03_TEXT": "Generator lock active", + "ENUM8100_05_TEXT": "DHW separation active", + "ENUM8100_06_TEXT": "Outdoor temperature limit active", + "ENUM8100_07_TEXT": "Not released", + "ENUM8313_01_TEXT": "Boiler sensor B2", + "ENUM8313_02_TEXT": "Return sensor B7", + "ENUM8313_03_TEXT": "DHW loading sensor B36", + "ENUM8313_04_TEXT": "DHW draw-off sensor B38", + "ENUM8313_05_TEXT": "DHW circulation sensor B39", + "ENUM8313_06_TEXT": "Cascade sensor B10/ B70", + "ENUM8390_01_TEXT": "1", + "ENUM8390_02_TEXT": "2", + "ENUM8390_03_TEXT": "TNN", + "ENUM8390_04_TEXT": "STY", + "ENUM8390_05_TEXT": "5", + "ENUM8390_06_TEXT": "6", + "ENUM8390_07_TEXT": "7", + "ENUM8390_08_TEXT": "8", + "ENUM8390_09_TEXT": "9", + "ENUM8390_0a_TEXT": "10", + "ENUM8390_0b_TEXT": "11", + "ENUM8390_0c_TEXT": "12", + "ENUM8390_0d_TEXT": "TSA", + "ENUM8390_0e_TEXT": "14", + "ENUM8390_0f_TEXT": "15", + "ENUM8390_10_TEXT": "MOD", + "ENUM8390_11_TEXT": "17", + "ENUM8390_12_TEXT": "18", + "ENUM8390_13_TEXT": "19", + "ENUM8390_14_TEXT": "20", + "ENUM8390_15_TEXT": "21", + "ENUM8390_16_TEXT": "22", + "ENUM8390_17_TEXT": "23", + "ENUM8390_18_TEXT": "24", + "ENUM8749_00_TEXT": "No need", + "ENUM9610_00_TEXT": "Up to 70 kWh", + "ENUM9610_01_TEXT": "> 70 kWh", + "ENUM9611_00_TEXT": "LP mode 1", + "ENUM9611_01_TEXT": "LP mode 2", + "ENUM9612_00_TEXT": "GP not connected", + "ENUM9612_01_TEXT": "GP connected", + "ENUM9614_00_TEXT": "Operation", + "ENUM9614_01_TEXT": "???", + "ENUM15044_00_02_TEXT": "Auto mode: off", + "ENUM15044_02_02_TEXT": "Auto mode: on", + "ENUM15044_00_08_TEXT": "Pump on", + "ENUM15044_08_08_TEXT": "Pump off", + "ENUM15044_00_10_TEXT": "Contact H1: open", + "ENUM15044_10_10_TEXT": "Contact H1: closed", + "ENUM15046_52_TEXT": "QAA 50", + "ENUM15046_53_TEXT": "QAA 70", + "ENUM_ERROR_00_TEXT": "No error", + "ENUM_ERROR_0a_TEXT": "Outdoor temperature sensor error", + "ENUM_ERROR_14_TEXT": "Boiler temperature 1 sensor error", + "ENUM_ERROR_19_TEXT": "Solid fuel boiler temperature sensor error", + "ENUM_ERROR_1a_TEXT": "Common flow temperature sensor error", + "ENUM_ERROR_1c_TEXT": "Flue gas temperature sensor error", + "ENUM_ERROR_1e_TEXT": "Flow temperature 1 sensor error", + "ENUM_ERROR_1f_TEXT": "Flow temperature 1 cooling sensor error", + "ENUM_ERROR_20_TEXT": "Flow temperature 2 sensor error", + "ENUM_ERROR_26_TEXT": "Flow temperature pre-control sensor error", + "ENUM_ERROR_28_TEXT": "Return temperature 1 sensor error", + "ENUM_ERROR_2e_TEXT": "Return temperature cascade sensor error", + "ENUM_ERROR_2f_TEXT": "Common return temperature sensor error", + "ENUM_ERROR_32_TEXT": "Potable water temperature 1 sensor error", + "ENUM_ERROR_34_TEXT": "Potable water temperature 2 sensor error", + "ENUM_ERROR_36_TEXT": "Potable water pre-control sensor error", + "ENUM_ERROR_39_TEXT": "Potable water circulation temperature sensor error", + "ENUM_ERROR_3c_TEXT": "Room temperature 1 sensor error", + "ENUM_ERROR_41_TEXT": "Room temperature 2 sensor error", + "ENUM_ERROR_44_TEXT": "Room temperature 3 sensor error", + "ENUM_ERROR_46_TEXT": "Buffer storage temperature 1 sensor error", + "ENUM_ERROR_47_TEXT": "Buffer storage temperature 2 sensor error", + "ENUM_ERROR_48_TEXT": "Buffer storage temperature 3 sensor error", + "ENUM_ERROR_49_TEXT": "Collector temperature 1 sensor error", + "ENUM_ERROR_4a_TEXT": "Collector temperature 2 sensor error", + "ENUM_ERROR_51_TEXT": "LPB short circuit", + "ENUM_ERROR_52_TEXT": "LPB address collision", + "ENUM_ERROR_53_TEXT": "BSB wire short circuit", + "ENUM_ERROR_54_TEXT": "BSB address collision", + "ENUM_ERROR_55_TEXT": "BSB radio communication error", + "ENUM_ERROR_58_TEXT": "Error communicating with QAA70 room device", + "ENUM_ERROR_5b_TEXT": "EEPROM error in locking information", + "ENUM_ERROR_5c_TEXT": "Hardware error in electronics", + "ENUM_ERROR_5f_TEXT": "Invalid time", + "ENUM_ERROR_62_TEXT": "Extension module 1 error (collective error)", + "ENUM_ERROR_63_TEXT": "Extension module 2 error (collective error)", + "ENUM_ERROR_64_TEXT": "Two time masters (LPB)", + "ENUM_ERROR_66_TEXT": "Time master without reserve power (LPB)", + "ENUM_ERROR_69_TEXT": "Maintenance message", + "ENUM_ERROR_6d_TEXT": "Boiler temperature monitoring", + "ENUM_ERROR_6e_TEXT": "Safety temperature limit disturbance shutdown", + "ENUM_ERROR_6f_TEXT": "Temperature watchdog shutdown", + "ENUM_ERROR_74_TEXT": "Shutdown by flue gas monitoring", + "ENUM_ERROR_75_TEXT": "Upper pressure limit (exceeded)", + "ENUM_ERROR_76_TEXT": "Critical lower pressure limit (fallen below)", + "ENUM_ERROR_77_TEXT": "Pressure switch error", + "ENUM_ERROR_79_TEXT": "Flow temperature 1 (HW 1) monitoring", + "ENUM_ERROR_7a_TEXT": "Flow temperature 2 (HW 2) monitoring", + "ENUM_ERROR_7d_TEXT": "Boiler temperature too high", + "ENUM_ERROR_7e_TEXT": "Potable water charging monitoring", + "ENUM_ERROR_7f_TEXT": "Legionella temperature not reached", + "ENUM_ERROR_80_TEXT": "Flame failure during operation", + "ENUM_ERROR_81_TEXT": "Speed limit violated", + "ENUM_ERROR_82_TEXT": "Flue gas temperature too high (flue temperature limit reached)", + "ENUM_ERROR_83_TEXT": "Burner fault", + "ENUM_ERROR_84_TEXT": "Gas pressure guard or air pressure guard error / open", + "ENUM_ERROR_85_TEXT": "No flame formation after safety time has elapsed", + "ENUM_ERROR_8c_TEXT": "Invalid LPB segment or device number", + "ENUM_ERROR_92_TEXT": "Configuration error collective message", + "ENUM_ERROR_94_TEXT": "Incompatibility LPB interface / base unit", + "ENUM_ERROR_97_TEXT": "Internal error", + "ENUM_ERROR_98_TEXT": "Parameterization error", + "ENUM_ERROR_99_TEXT": "Unlock button was pressed", + "ENUM_ERROR_9a_TEXT": "Temperature warning", + "ENUM_ERROR_a0_TEXT": "Fan error", + "ENUM_ERROR_a1_TEXT": "Maximum fan speed exceeded", + "ENUM_ERROR_a2_TEXT": "Air pressure guard does not close", + "ENUM_ERROR_a3_TEXT": "Modulation coil error gas valve", + "ENUM_ERROR_a4_TEXT": "Flow guard does not switch (no water circulation)", + "ENUM_ERROR_a6_TEXT": "Flue gas pressure guard does not open", + "ENUM_ERROR_ab_TEXT": "Alarm contact 1 (H1 or H4) active", + "ENUM_ERROR_ac_TEXT": "Alarm contact 2 (EM1, EM2 or EM3) or H5 active", + "ENUM_ERROR_ad_TEXT": "Alarm contact 3 (EX2 / 230 VAC) active", + "ENUM_ERROR_ae_TEXT": "Alarm contact 4 (H3) active", + "ENUM_ERROR_b0_TEXT": "Upper pressure limit 2 (exceeded)", + "ENUM_ERROR_b1_TEXT": "Critical lower pressure limit 2 (fallen below)", + "ENUM_ERROR_b2_TEXT": "Temperature guard heating circuit 1", + "ENUM_ERROR_b3_TEXT": "Temperature guard heating circuit 2", + "ENUM_ERROR_b4_TEXT": "Chimney sweep function is active", + "ENUM_ERROR_b5_TEXT": "Controller stop function is active", + "ENUM_ERROR_b6_TEXT": "Drift test active (no fault!)", + "ENUM_ERROR_b7_TEXT": "Device in parameterization mode", + "ENUM_ERROR_b8_TEXT": "Modem function is activated", + "ENUM_ERROR_b9_TEXT": "Concrete drying function activated", + "ENUM_ERROR_be_TEXT": "Erroneous variant detection", + "ENUM_ERROR_bf_TEXT": "STB has opened", + "ENUM_ERROR_c0_TEXT": "Error voltage supply PPS bus", + "ENUM_ERROR_c1_TEXT": "Flow guard does not switch", + "ENUM_ERROR_cf_TEXT": "Fault cooling circuit", + "ENUM_ERROR_d9_TEXT": "Sensor / sensor error collective message", + "ENUM_ERROR_da_TEXT": "Pressure monitoring collective message", + "ENUM_ERROR_de_TEXT": "High pressure during heat pump operation", + "ENUM_ERROR_f1_TEXT": "Flow sensor solar sensor error", + "ENUM_ERROR_f2_TEXT": "Return sensor solar sensor error", + "ENUM_ERROR_f3_TEXT": "Swimming pool temperature sensor error", + "ENUM_ERROR_01_04_TEXT": "Flow temperature 3 sensor error", + "ENUM_ERROR_01_0e_TEXT": "Monitor function", + "ENUM_ERROR_01_3d_TEXT": "Mains frequency outside the permitted range", + "ENUM_ERROR_01_40_TEXT": "Potable water loading temperature sensor error", + "ENUM_ERROR_01_41_TEXT": "Flow heater tap temperature sensor error", + "ENUM_ERROR_01_42_TEXT": "Upper pressure limit 3 (exceeded)", + "ENUM_ERROR_01_43_TEXT": "Critical lower pressure limit 3 (fallen below)", + "ENUM_ERROR_01_44_TEXT": "BX same sensors", + "ENUM_ERROR_01_45_TEXT": "BX / extension module same sensors", + "ENUM_ERROR_01_46_TEXT": "BX / mixer group same sensors", + "ENUM_ERROR_01_47_TEXT": "Extension module same function", + "ENUM_ERROR_01_48_TEXT": "Mixer group same function", + "ENUM_ERROR_01_49_TEXT": "Extension module / mixer group same function", + "ENUM_ERROR_01_4a_TEXT": "Sensor BX1 no function", + "ENUM_ERROR_01_4b_TEXT": "Sensor BX2 no function", + "ENUM_ERROR_01_4c_TEXT": "Sensor BX3 no function", + "ENUM_ERROR_01_4d_TEXT": "Sensor BX4 no function", + "ENUM_ERROR_01_4e_TEXT": "Sensor BX5 no function", + "ENUM_ERROR_01_4f_TEXT": "Sensor BX21 no function", + "ENUM_ERROR_01_50_TEXT": "Sensor BX22 no function", + "ENUM_ERROR_01_52_TEXT": "Sensor BX12 no function", + "ENUM_ERROR_01_53_TEXT": "Collector pump Q5 missing", + "ENUM_ERROR_01_54_TEXT": "Collector pump Q16 missing", + "ENUM_ERROR_01_55_TEXT": "Collector sensor B6 missing", + "ENUM_ERROR_01_56_TEXT": "Solar DHW sensor B31 missing", + "ENUM_ERROR_01_57_TEXT": "Solar integration missing", + "ENUM_ERROR_01_58_TEXT": "Solar actuator buffer K8 missing", + "ENUM_ERROR_01_59_TEXT": "Solar actuator swimming pool K18 missing", + "ENUM_ERROR_01_5a_TEXT": "Solid fuel boiler pump Q10 missing", + "ENUM_ERROR_01_5b_TEXT": "Solid fuel boiler comparison sensor missing", + "ENUM_ERROR_01_5c_TEXT": "Solid fuel boiler address error", + "ENUM_ERROR_01_5d_TEXT": "Buffer return valve Y15 missing", + "ENUM_ERROR_01_5e_TEXT": "Buffer storage address error", + "ENUM_ERROR_01_5f_TEXT": "Pre-control valve / feed pump address error", + "ENUM_ERROR_01_60_TEXT": "Hydraulic softener address error", + "ENUM_ERROR_01_61_TEXT": "Cascade sensor B10 missing", + "ENUM_ERROR_01_65_TEXT": "Flow temperature monitoring cooling circuit 1", + "ENUM_ERROR_01_6e_TEXT": "Room temperature Hx sensor error", + "ENUM_ERROR_01_6f_TEXT": "Relative room humidity Hx sensor error", + "ENUM_ERROR_01_72_TEXT": "Thermodynamic generator", + "ENUM_ERROR_01_73_TEXT": "Flow temperature 3 (HW 3) monitoring", + "ENUM_ERROR_01_74_TEXT": "Temperature guard HW 3", + "ENUM_ERROR_01_75_TEXT": "Extension module 3 error (collective error)", + "ENUM_ERROR_01_76_TEXT": "Sitherm Pro calculation", + "ENUM_ERROR_01_77_TEXT": "BV stepper motor", + "ENUM_ERROR_01_78_TEXT": "Drift test limit value", + "ENUM_ERROR_01_79_TEXT": "Drift test prevented", + "ENUM_ERROR_01_7a_TEXT": "Repetition counter internal error expired", + "ENUM_ERROR_01_7e_TEXT": "Repetition counter fan error expired", + "ENUM_ERROR_01_80_TEXT": "Foreign light", + "ENUM_ERROR_01_82_TEXT": "Fan speed has left valid range", + "ENUM_ERROR_01_83_TEXT": "Air pressure guard error", + "ENUM_ERROR_01_ab_TEXT": "Configuration exhaust gas flap", + "ENUM_ERROR_01_ad_TEXT": "Dyn water pressure too high", + "ENUM_ERROR_01_ae_TEXT": "Dyn water pressure too low", + "ENUM_ERROR_01_af_TEXT": "Primary exch sensor (aluminum exchanger)", + "ENUM_ERROR_01_b0_TEXT": "Function earth X17 not connected", + "ENUM_ERROR_01_b1_TEXT": "Heat exchange temperature", + "ENUM_INTCODE_01_TEXT": "Short circuit", + "ENUM_INTCODE_02_TEXT": "Open circuit", + "ENUM_INTCODE_dd_TEXT": "Fan speed out of range", + "ENUM_INTCODE_01_45_TEXT": "Software error", + "ENUM_INTCODE_01_46_TEXT": "Software error", + "ENUM_INTCODE_01_47_TEXT": "Software error", + "ENUM_INTCODE_01_48_TEXT": "Software error", + "ENUM_INTCODE_01_49_TEXT": "Software error", + "ENUM_INTCODE_01_4a_TEXT": "Igniter relay closing error", + "ENUM_INTCODE_01_4b_TEXT": "Igniter relay opening error", + "ENUM_INTCODE_01_4c_TEXT": "Gas valve relay closing error", + "ENUM_INTCODE_01_4d_TEXT": "Gas valve relay opening error", + "ENUM_INTCODE_01_4e_TEXT": "Ignition error of channel 2", + "ENUM_INTCODE_01_4f_TEXT": "Switching off error of channel 2", + "ENUM_INTCODE_01_50_TEXT": "Safety relay closing error", + "ENUM_INTCODE_01_51_TEXT": "Safety relay opening error", + "ENUM_INTCODE_01_52_TEXT": "Ignition error of channel 1", + "ENUM_INTCODE_01_53_TEXT": "Switching off error of channel 1", + "ENUM_INTCODE_01_59_TEXT": "Software error on micro 1", + "ENUM_INTCODE_01_5a_TEXT": "Gas type change error", + "ENUM_INTCODE_01_5b_TEXT": "Max fan speed <= Max accepted fan speed", + "ENUM_INTCODE_01_5c_TEXT": "Prepurge fan speed <= Accepted prepurge fan speed", + "ENUM_INTCODE_01_5d_TEXT": "Minimum fan speed >= Minimum accepted fan speed", + "ENUM_INTCODE_01_5e_TEXT": "Postpurge fan speed >= Accepted postpurge fan speed", + "ENUM_INTCODE_01_65_TEXT": "Fan speed out of range", + "ENUM_INTCODE_01_66_TEXT": "Ionization or fan speed with electrode drift test not in the defined area. Problem: Power supply, blower-PWM setting", + "ENUM_INTCODE_01_67_TEXT": "Control value out of range", + "ENUM_INTCODE_01_68_TEXT": "Calculated value over the threshold", + "ENUM_INTCODE_01_69_TEXT": "Calculated value below the threshold", + "ENUM_INTCODE_01_6a_TEXT": "Gas valve stepper position over the threshold", + "ENUM_INTCODE_01_6b_TEXT": "Gas valve stepper position below the threshold", + "ENUM_INTCODE_01_6c_TEXT": "Ionization current out of range", + "ENUM_INTCODE_01_6d_TEXT": "R value out of range", + "ENUM_INTCODE_01_6e_TEXT": "Open contact on stepper motor", + "ENUM_INTCODE_01_6f_TEXT": "Short circuit on stepper motor", + "ENUM_INTCODE_01_70_TEXT": "Low supply voltage on stepper motor", + "ENUM_INTCODE_01_71_TEXT": "High supply voltage on stepper motor", + "ENUM_INTCODE_01_72_TEXT": "Prevention of startup for a stepper motor is interrupted", + "ENUM_INTCODE_01_73_TEXT": "Too much correction of drift test", + "ENUM_INTCODE_01_74_TEXT": "Too much correction of drift test", + "ENUM_INTCODE_01_75_TEXT": "Drift test performed 4 times consecutively (temporary error)", + "ENUM_INTCODE_01_a2_TEXT": "Drift test counter monitor has exceeded", + "ENUM_INTCODE_01_a3_TEXT": "Maximum temperature of Electronic Safe Limit temperature", + "ENUM_INTCODE_01_a4_TEXT": "Return temperature higher than flow temperature more than 10K (temporary error)", + "ENUM_INTCODE_01_a5_TEXT": "Return temperature equal to or higher than flow temperature more than 10K-2", + "ENUM_INTCODE_01_aa_TEXT": "Temperature slope", + "ENUM_INTCODE_01_ab_TEXT": "Unlock limit of temperature slope not reached", + "ENUM_INTCODE_01_ac_TEXT": "Flow - return temperature higher than 56K (temporary error)", + "ENUM_INTCODE_01_ad_TEXT": "Unlock limit of flow - return temperature higher than 56K", + "ENUM_INTCODE_01_af_TEXT": "Accepted times return temperature higher than flow temperature more than 10K reached (lockout error)", + "ENUM_INTCODE_01_b4_TEXT": "Electronic Safe Limit temperature on return temperature", + "ENUM_INTCODE_01_b5_TEXT": "Accepted times temperature slope reached", + "ENUM_INTCODE_01_b6_TEXT": "Accepted times flow - return temperature higher than 56K reached (lockout error)", + "ENUM_INTCODE_01_f3_TEXT": "Internal counter out of range", + "ENUM_INTCODE_01_f4_TEXT": "Reached limit of flow temperature of flow setpoint plus 30K for 2 times in 10 minutes", + "ENUM_INTCODE_01_f5_TEXT": "No flow temperature variation for 20 seconds", + "ENUM_INTCODE_01_f6_TEXT": "No return temperature variation for 20 seconds", + "ENUM_INTCODE_01_f7_TEXT": "Flatness 2 test on flow sensor", + "ENUM_INTCODE_01_f8_TEXT": "Flatness 2 test on return sensor", + "ENUM_INTCODE_01_fa_TEXT": "Short circuit (lockout)", + "ENUM_INTCODE_01_fb_TEXT": "Temperature differential between flow temperature and exchanger temperature - Dry fire (lockout error)", + "ENUM_INTCODE_01_fc_TEXT": "Exchanger temperature > 95°C (lockout error)", + "ENUM_INTCODE_01_fd_TEXT": "Exchanger temperature > 95°C (temporary error)", + "ENUM_INTCODE_02_1b_TEXT": "Short circuit (lockout)", + "ENUM_INTCODE_02_1c_TEXT": "Open circuit (lockout)", + "ENUM_INTCODE_02_1f_TEXT": "Short circuit (temporary error)", + "ENUM_INTCODE_02_20_TEXT": "Open circuit (temporary error)", + "ENUM_INTCODE_02_23_TEXT": "Short circuit (lockout error)", + "ENUM_INTCODE_02_24_TEXT": "Open circuit (lockout error)", + "ENUM_INTCODE_02_2d_TEXT": "Dynamic pressure test failed (lockout error)", + "ENUM_INTCODE_02_2e_TEXT": "Dynamic water pressure too high (lockout error)", + "ENUM_INTCODE_02_2f_TEXT": "Dynamic test times exceeded (lockout error)", + "ENUM_INTCODE_02_30_TEXT": "Short circuit (temporary error)", + "ENUM_INTCODE_02_31_TEXT": "Flow pressure switch central heating (lockout error)", + "ENUM_INTCODE_02_32_TEXT": "Flow pressure switch central heating (temporary error)", + "ENUM_INTCODE_02_33_TEXT": "Water pressure limit (lockout error)", + "ENUM_INTCODE_02_34_TEXT": "Water pressure limit (temporary error)", + "ENUM_INTCODE_02_35_TEXT": "Static water pressure limit (lockout error)", + "ENUM_INTCODE_02_36_TEXT": "Static water pressure limit (temporary error) > 2.8 bar", + "ENUM_INTCODE_02_3c_TEXT": "Input HX parameterization: limit thermostat", + "ENUM_INTCODE_02_3d_TEXT": "Input HX parameterization", + "ENUM_INTCODE_02_3e_TEXT": "Input HX parameterization: air pressure switch", + "ENUM_INTCODE_02_3f_TEXT": "10V signal input parameterization", + "ENUM_INTCODE_02_40_TEXT": "Input H6 with 2 different functions associated", + "ENUM_INTCODE_02_41_TEXT": "Input H7 with 2 different functions associated", + "ENUM_INTCODE_02_42_TEXT": "Input B4 with 2 different functions associated", + "ENUM_INTCODE_02_43_TEXT": "Bypass pump Q12 parameterization", + "ENUM_INTCODE_02_44_TEXT": "Cooling request K28 parameterization", + "ENUM_INTCODE_02_45_TEXT": "Water filling K34 parameterization", + "ENUM_INTCODE_02_ea_TEXT": "Feedback error from PCB (SR)", + "ENUM_INTCODE_02_eb_TEXT": "Feedback error from gas valve relay (BV1)", + "ENUM_INTCODE_03_00_TEXT": "Control value limit reached during the drift test", + "ENUM_INTCODE_03_01_TEXT": "Ionization drift crash during testing", + "ENUM_INTCODE_03_17_TEXT": "Water refill time for single refilling elapsed (lockout error)", + "ENUM_INTCODE_03_18_TEXT": "Water refill time weekly elapsed (lockout error)", + "ENUM_INTCODE_03_19_TEXT": "Automatic filling loop error (lockout)", + "ENUM_INTCODE_03_1b_TEXT": "Water refill time elapsed (temporary error)", + "ENUM_INTCODE_03_1c_TEXT": "Water refill time weekly elapsed (temporary error)", + "ENUM_INTCODE_03_1d_TEXT": "Automatic filling loop error (temporary error)", + "ENUM_INTCODE_03_20_TEXT": "Alarm contact input H1", + "ENUM_INTCODE_03_21_TEXT": "Alarm contact input H2 of extension module 1", + "ENUM_INTCODE_03_22_TEXT": "Alarm contact input H2 of extension module 2", + "ENUM_INTCODE_03_23_TEXT": "Alarm contact input H2 of extension module 3", + "ENUM_INTCODE_03_24_TEXT": "Alarm contact input H3", + "ENUM_INTCODE_03_25_TEXT": "Alarm contact input H4", + "ENUM_INTCODE_03_26_TEXT": "Alarm contact input H5", + "ENUM_INTCODE_03_27_TEXT": "Alarm contact input H6", + "ENUM_INTCODE_03_28_TEXT": "Alarm contact input H7", + "ENUM_SWCODE_11_TEXT": "STB interruption", + "ENUM_SWCODE_53_TEXT": "Allowed speed band for ignition load was not reached during commissioning.", + "ENUM_SWCODE_5f_TEXT": "Check speed adjustment, prescribed band is not reached.", + "ENUM_SWCODE_60_TEXT": "Foreign light (impermissible flame signal) during run-up or standby", + "ENUM_SWCODE_61_TEXT": "Foreign light (impermissible flame signal)", + "ENUM_SWCODE_69_TEXT": "The device is in the programming position (PC tool)", + "ENUM_SWCODE_73_TEXT": "STB shut-off temperature exceeded (electric STB)", + "ENUM_SWCODE_81_TEXT": "Interruption (STB or internal; e.g. by valve short circuit)", + "ENUM_SWCODE_a2_TEXT": "Invalid AD configuration in configRg3", + "ENUM_SWCODE_a8_TEXT": "Chimney sweep function active", + "ENUM_SWCODE_a9_TEXT": "Controller stop function active", + "ENUM_SWCODE_aa_TEXT": "Unlock button is permanently actuated", + "ENUM_SWCODE_01_19_TEXT": "Fan speed exceeded", + "ENUM_SWCODE_01_20_TEXT": "Fan speed undershot", + "ENUM_SWCODE_01_45_TEXT": "Invalid schema in hydraulic system or internal error", + "ENUM_SWCODE_01_a6_TEXT": "Electric STB triggered (post-heating)", + "ENUM_SWCODE_01_aa_TEXT": "Boiler temperature is rising faster than allowed", + "ENUM_SWCODE_01_b1_TEXT": "Delta-T is greater than the design spread dTkTrSTB + 16K", + "ENUM_SWCODE_01_c5_TEXT": "Invalid configuration of the reversing valve in configRg4", + "ENUM_SWCODE_01_c7_TEXT": "Hydraulic diagram does not contain heating circuit 1", + "ENUM_SWCODE_01_c8_TEXT": "Hydraulic diagram does not contain heating circuit 2", + "ENUM_SWCODE_01_c9_TEXT": "Hydraulic diagram does not contain a zone", + "ENUM_SWCODE_01_ca_TEXT": "Registered request is not defined for DHW and has therefore been reset (OFF)", + "ENUM_SWCODE_01_cb_TEXT": "Registered request is not defined for HW1 and has therefore been reset (OFF)", + "ENUM_SWCODE_01_cc_TEXT": "Registered request is not defined for HW2 and has therefore been reset (OFF)", + "ENUM_SWCODE_01_cd_TEXT": "Registered request is not defined for zone and has therefore been reset (OFF)", + "ENUM_SWCODE_01_d6_TEXT": "Electric STB triggered (post-heating)", + "ENUM_SWCODE_01_e3_TEXT": "The hydraulic schematic does not include a zone.", + "ENUM_SWCODE_01_ef_TEXT": "Connected LPB clip-in is defective.", + "ENUM_SWCODE_01_f1_TEXT": "Parameterization request via the LPB bus.", + "ENUM_SWCODE_02_04_TEXT": "Mixer clip-in is defective.", + "ENUM_SWCODE_02_06_TEXT": "Short circuit on the LPB bus or no bus power.", + "ENUM_SWCODE_02_07_TEXT": "Address collision on the LPB bus.", + "ENUM_SWCODE_02_08_TEXT": "Two-time master system error.", + "ENUM_SWCODE_02_1b_TEXT": "One QAA and one OCI acting as time masters.", + "ENUM_SWCODE_02_24_TEXT": "Input clip-in is incorrectly programmed or not possible.", + "ENUM_SWCODE_02_26_TEXT": "The hydraulic diverter cannot be operated with this schematic (control/pump).", + "ENUM_SWCODE_02_28_TEXT": "Relay clip-in is defective.", + "ENUM_SWCODE_02_30_TEXT": "Burner operating hours exceeded since the last maintenance.", + "ENUM_SWCODE_02_31_TEXT": "Commissioning time exceeded since the last maintenance.", + "ENUM_SWCODE_02_32_TEXT": "Months since the last maintenance exceeded.", + "ENUM_SWCODE_02_33_TEXT": "Flame ionization current limit exceeded.", + "ENUM_SWCODE_02_3d_TEXT": "Fault in the exhaust flap control: feedback defective.", + "ENUM_SWCODE_02_5f_TEXT": "Solar clip-in is defective.", + "ENUM_SWCODE_02_60_TEXT": "Concrete drying function is active.", + "ENUM_SWCODE_02_6c_TEXT": "Drift test is active (no fault!).", + "ENUM_SWCODE_02_6d_TEXT": "Flow temperature alarm for heating circuit 1.", + "ENUM_SWCODE_02_6e_TEXT": "Flow temperature alarm for heating circuit 2.", + "ENUM_SWCODE_02_7d_TEXT": "Setpoint for manual operation above/below max. boiler temperature or min. boiler temperature.", + "ENUM_WARTUNG_01_TEXT": "Burner operating hours exceeded.", + "ENUM_WARTUNG_02_TEXT": "Burner starts exceeded.", + "ENUM_WARTUNG_03_TEXT": "Maintenance interval exceeded.", + "ENUM_WARTUNG_05_TEXT": "Water pressure in the heating circuit is too low (lower pressure limit 1 undershot).", + "ENUM_WARTUNG_12_TEXT": "Water pressure 2 in the heating circuit is too low (lower pressure limit 2 undershot).", + "ENUM_WARTUNG_0a_TEXT": "Change the battery for the outdoor sensor.", + "ENUM_WARTUNG_15_TEXT": "Maximum flue gas temperature exceeded.", + "ENUM_WARTUNG_16_TEXT": "Water pressure 3 in the heating circuit is too low (lower pressure limit 3 undershot).", + "ENUM_SONDERBETRIEB_01_2d_TEXT": "Manual operation.", + "ENUM_SONDERBETRIEB_01_2e_TEXT": "STB test.", + "ENUM_SONDERBETRIEB_01_2f_TEXT": "Chimney sweep function.", + "ENUM_SONDERBETRIEB_01_35_TEXT": "Simulation of outside temperature.", + "ENUM_SONDERBETRIEB_01_36_TEXT": "Alternative energy.", + "ENUM_WEEKDAY_01_TEXT": "Monday", + "ENUM_WEEKDAY_02_TEXT": "Tuesday", + "ENUM_WEEKDAY_03_TEXT": "Wednesday", + "ENUM_WEEKDAY_04_TEXT": "Thursday", + "ENUM_WEEKDAY_05_TEXT": "Friday", + "ENUM_WEEKDAY_06_TEXT": "Saturday", + "ENUM_WEEKDAY_07_TEXT": "Sunday", + "EXTIF_STARTDATE_TEXT": "Start date", + "EXTIF_ENDDATE_TEXT": "End date" }