less.nro.VER

'\" t
.TH LESS 1 "Version @@VERSION@@: @@DATE@@"
.SH NAME
less \- display the contents of a file in a terminal
.SH SYNOPSIS
.B "less \-?"
.br
.B "less \-\-help"
.br
.B "less \-V"
.br
.B "less \-\-version"
.br
.B "less [\-[+]aABcCdeEfFgGiIJKLmMnNqQrRsSuUVwWX\(ti]"
.br
.B "     [\-b \fIspace\/\fP] [\-h \fIlines\/\fP] [\-j \fIline\/\fP] [\-k \fIkeyfile\/\fP]"
.br
.B "     [\-{oO} \fIlogfile\/\fP] [\-p \fIpattern\/\fP] [\-P \fIprompt\/\fP] [\-t \fItag\/\fP]"
.br
.B "     [\-T \fItagsfile\/\fP] [\-x \fItab\/\fP,...] [\-y \fIlines\/\fP] [\-[z] \fIlines\/\fP]"
.br
.B "     [\-# \fIshift\/\fP] [+[+]\fIcmd\/\fP] [\-\-] [\fIfilename\/\fP]..."
.br
(See the OPTIONS section for alternate option syntax with long option names.)
.
.SH DESCRIPTION
.B Less
is a program similar to
.BR more (1),
but it has many more features.
.B Less
does not have to read the entire input file before starting,
so with large input files it starts up faster than text editors like
.BR vi (1).
.B Less
uses termcap (or terminfo on some systems),
so it can run on a variety of terminals.
There is even limited support for hardcopy terminals.
(On a hardcopy terminal, lines which should be printed at the top
of the screen are prefixed with a caret.)
.SH COMMANDS
Commands are based on both
.B more
and
.BR vi .
Commands may be preceded by a decimal number,
called N in the descriptions below.
The number is used by some commands, as indicated.
.PP
In the following descriptions, \(haX means control-X.
ESC stands for the ESCAPE key; for example ESC-v means the
two character sequence "ESCAPE", then "v".
.IP "h or H"
Help: display a summary of these commands.
If you forget all the other commands, remember this one.
.IP "SPACE or \(haV or f or \(haF"
Scroll forward N lines, default one window (see option \-z below).
If N is more than the screen size, only the final screenful is displayed.
Warning: some systems use \(haV as a special literalization character.
.IP "z"
Like SPACE, but if N is specified, it becomes the new window size.
.IP "ESC-SPACE"
Like SPACE, but scrolls a full screenful, even if it reaches
end-of-file in the process.
.IP "ENTER or RETURN or \(haN or e or \(haE or j or \(haJ"
Scroll forward N lines, default 1.
The entire N lines are displayed, even if N is more than the screen size.
.IP "d or \(haD"
Scroll forward N lines, default one half of the screen size.
If N is specified, it becomes the new default for
subsequent d and u commands.
.IP "b or \(haB or ESC-v"
Scroll backward N lines, default one window (see option \-z below).
If N is more than the screen size, only the final screenful is displayed.
.IP "w"
Like ESC-v, but if N is specified, it becomes the new window size.
.IP "y or \(haY or \(haP or k or \(haK"
Scroll backward N lines, default 1.
The entire N lines are displayed, even if N is more than the screen size.
Warning: some systems use \(haY as a special job control character.
.IP "u or \(haU"
Scroll backward N lines, default one half of the screen size.
If N is specified, it becomes the new default for
subsequent d and u commands.
.IP "J"
Like j, but continues to scroll beyond the end of the file.
.IP "K or Y"
Like k, but continues to scroll beyond the beginning of the file.
.IP "ESC-) or RIGHTARROW"
Scroll horizontally right N characters, default half the screen width
(see the \-# option).
If a number N is specified, it becomes the default for future RIGHTARROW
and LEFTARROW commands.
While the text is scrolled, it acts as though the \-S option
(chop lines) were in effect.
.IP "ESC-( or LEFTARROW"
Scroll horizontally left N characters, default half the screen width
(see the \-# option).
If a number N is specified, it becomes the default for future RIGHTARROW
and LEFTARROW commands.
.IP "ESC-} or \(haRIGHTARROW"
Scroll horizontally right to show the end of the longest displayed line.
.IP "ESC-{ or \(haLEFTARROW"
Scroll horizontally left back to the first column.
.IP "r or \(haR or \(haL"
Repaint the screen.
.IP R
Repaint the screen, discarding any buffered input.
That is, reload the current file.
Useful if the file is changing while it is being viewed.
.IP "F"
Scroll forward, and keep trying to read when the
end of file is reached.
Normally this command would be used when already at the end of the file.
It is a way to monitor the tail of a file which is growing
while it is being viewed.
(The behavior is similar to the "tail \-f" command.)
To stop waiting for more data, enter the interrupt character (usually \(haC).
On systems which support
.BR poll (2)
you can also use \(haX or the character specified by the \-\-intr option.
If the input is a pipe and the \-\-exit-follow-on-close option is in effect,
.B less
will automatically stop waiting for data when the input side 
of the pipe is closed.
.IP "ESC-F"
Like F, but as soon as a line is found which matches
the last search pattern, the terminal bell is rung
and forward scrolling stops.
.IP "g or < or ESC-<"
Go to line N in the file, default 1 (beginning of file).
(Warning: this may be slow if N is large.)
.IP "G or > or ESC->"
Go to line N in the file, default the end of the file.
(Warning: this may be slow if N is large,
or if N is not specified and
standard input, rather than a file, is being read.)
.IP "ESC-G"
Same as G, except if no number N is specified and the input is standard input,
goes to the last line which is currently buffered.
.IP "p or %"
Go to a position N percent into the file.
N should be between 0 and 100, and may contain a decimal point.
.IP "P"
Go to the line containing byte offset N in the file.
.IP "{"
If a left curly bracket appears in the top line displayed
on the screen,
the { command will go to the matching right curly bracket.
The matching right curly bracket is positioned on the bottom
line of the screen.
If there is more than one left curly bracket on the top line,
a number N may be used to specify the N-th bracket on the line.
.IP "}"
If a right curly bracket appears in the bottom line displayed
on the screen,
the } command will go to the matching left curly bracket.
The matching left curly bracket is positioned on the top
line of the screen.
If there is more than one right curly bracket on the bottom line,
a number N may be used to specify the N-th bracket on the line.
.IP "("
Like {, but applies to parentheses rather than curly brackets.
.IP ")"
Like }, but applies to parentheses rather than curly brackets.
.IP "["
Like {, but applies to square brackets rather than curly brackets.
.IP "]"
Like }, but applies to square brackets rather than curly brackets.
.IP "ESC-\(haF"
Followed by two characters,
acts like {, but uses the two characters as open and close brackets,
respectively.
For example, "ESC \(haF < >" could be used to
go forward to the > which matches the < in the top displayed line.
.IP "ESC-\(haB"
Followed by two characters,
acts like }, but uses the two characters as open and close brackets,
respectively.
For example, "ESC \(haB < >" could be used to
go backward to the < which matches the > in the bottom displayed line.
.IP m
Followed by any lowercase or uppercase letter,
marks the first displayed line with that letter.
If the status column is enabled via the \-J option,
the status column shows the marked line.
.IP M
Acts like m, except the last displayed line is marked
rather than the first displayed line.
.IP "\(aq"
(Single quote.)
Followed by any lowercase or uppercase letter, returns to the position which
was previously marked with that letter.
Followed by another single quote, returns to the position at
which the last "large" movement command was executed.
Followed by a \(ha or $, jumps to the beginning or end of the
file respectively.
Marks are preserved when a new file is examined,
so the \(aq command can be used to switch between input files.
.IP "\(haX\(haX"
Same as single quote.
.IP "ESC-m"
Followed by any lowercase or uppercase letter,
clears the mark identified by that letter.
.IP /pattern
Search forward in the file for the N-th line containing the pattern.
N defaults to 1.
The pattern is a regular expression, as recognized by
the regular expression library supplied by your system.
By default, searching is case-sensitive (uppercase and lowercase 
are considered different); the \-i option can be used to change this.
The search starts at the first line displayed
(but see the \-a and \-j options, which change this).
.sp
Certain characters are special
if entered at the beginning of the pattern;
they modify the type of search rather than become part of the pattern:
.RS
.IP "\(haN or !"
Search for lines which do NOT match the pattern.
.IP "\(haE or *"
Search multiple files.
That is, if the search reaches the END of the current file
without finding a match,
the search continues in the next file in the command line list.
.IP "\(haF or @"
Begin the search at the first line of the FIRST file
in the command line list,
regardless of what is currently displayed on the screen
or the settings of the \-a or \-j options.
.IP "\(haK"
Highlight any text which matches the pattern on the current screen,
but don't move to the first match (KEEP current position).
.IP "\(haR"
Don't interpret regular expression metacharacters;
that is, do a simple textual comparison.
.IP "\(haS"
Followed by a digit N between 1 and 5.
Only text which has a non-empty match for the N-th parenthesized SUB-PATTERN 
will be considered to match the pattern.
(Supported only if
.B less 
is built with one of the regular expression libraries
.BR posix ", " pcre ", or " pcre2 ".)"
Multiple \(haS modifiers can be specified,
to match more than one sub-pattern.
.IP "\(haW"
WRAP around the current file.
That is, if the search reaches the end of the current file
without finding a match, the search continues from the first line of the
current file up to the line where it started.
If the \(haW modifier is set, the \(haE modifier is ignored.
.IP "\(haL"
The next character is taken literally; that is, it becomes part of the pattern
even if it is one of the above search modifier characters.
.RE
.IP ?pattern
Search backward in the file for the N-th line containing the pattern.
The search starts at the last line displayed
(but see the \-a and \-j options, which change this).
.sp
Certain characters are special as in the / command:
.RS
.IP "\(haN or !"
Search for lines which do NOT match the pattern.
.IP "\(haE or *"
Search multiple files.
That is, if the search reaches the beginning of the current file
without finding a match,
the search continues in the previous file in the command line list.
.IP "\(haF or @"
Begin the search at the last line of the last file
in the command line list,
regardless of what is currently displayed on the screen
or the settings of the \-a or \-j options.
.IP "\(haK"
As in forward searches.
.IP "\(haR"
As in forward searches.
.IP "\(haS"
As in forward searches.
.IP "\(haW"
WRAP around the current file.
That is, if the search reaches the beginning of the current file
without finding a match, the search continues from the last line of the
current file up to the line where it started.
.IP "\(haL"
As in forward searches.
.RE
.IP "ESC-/pattern"
Same as "/*".
.IP "ESC-?pattern"
Same as "?*".
.IP n
Repeat previous search, for N-th line containing the last pattern.
If the previous search was modified by \(haN, the search is made for the
N-th line NOT containing the pattern.
If the previous search was modified by \(haE, the search continues
in the next (or previous) file if not satisfied in the current file.
If the previous search was modified by \(haR, the search is done
without using regular expressions.
If the previous search was modified by \(haW, the search wraps at
the end (or beginning) of the file.
There is no effect if the previous search was modified by \(haF or \(haK.
.IP N
Repeat previous search, but in the reverse direction.
.IP "ESC-n"
Repeat previous search, but crossing file boundaries.
The effect is as if the previous search were modified by *.
.IP "ESC-N"
Repeat previous search, but in the reverse direction
and crossing file boundaries.
.IP "ESC-u"
Undo search highlighting.
Turn off highlighting of strings matching the current search pattern.
If highlighting is already off because of a previous ESC-u command,
turn highlighting back on.
Any search command will also turn highlighting back on.
(Highlighting can also be disabled by toggling the \-G option;
in that case search commands do not turn highlighting back on.)
.IP "ESC-U"
Like ESC-u but also clears the saved search pattern.
If the status column is enabled via the \-J option,
this clears all search matches marked in the status column.
.IP "&pattern"
Display only lines which match the pattern;
lines which do not match the pattern are not displayed.
If pattern is empty (if you type & immediately followed by ENTER),
any filtering is turned off, and all lines are displayed.
While filtering is in effect, an ampersand is displayed at the
beginning of the prompt,
as a reminder that some lines in the file may be hidden.
Multiple & commands may be entered, in which case only lines
which match all of the patterns will be displayed.
.sp
Certain characters are special as in the / command:
.RS
.IP "\(haN or !"
Display only lines which do NOT match the pattern.
.IP "\(haR"
Don't interpret regular expression metacharacters;
that is, do a simple textual comparison.
.RE
.IP ":e [filename]"
Examine a new file.
If the filename is missing, the "current" file (see the :n and :p commands
below) from the list of files in the command line is re-examined.
A percent sign (%) in the filename is replaced by the name of the
current file.
A pound sign (#) is replaced by the name of the previously examined file.
However, two consecutive percent signs are simply
replaced with a single percent sign.
This allows you to enter a filename that contains a percent sign
in the name.
Similarly, two consecutive pound signs are replaced with a single pound sign.
The filename is inserted into the command line list of files
so that it can be seen by subsequent :n and :p commands.
If the filename consists of several files, they are all inserted into
the list of files and the first one is examined.
If the filename contains one or more spaces,
the entire filename should be enclosed in double quotes
(also see the \-" option).
.IP "\(haX\(haV or E"
Same as :e.
Warning: some systems use \(haV as a special literalization character.
On such systems, you may not be able to use \(haV.
.IP ":n"
Examine the next file (from the list of files given in the command line).
If a number N is specified, the N-th next file is examined.
.IP ":p"
Examine the previous file in the command line list.
If a number N is specified, the N-th previous file is examined.
.IP ":x"
Examine the first file in the command line list.
If a number N is specified, the N-th file in the list is examined.
.IP ":d"
Remove the current file from the list of files.
.IP "t"
Go to the next tag, if there were more than one matches for the current tag.
See the \-t option for more details about tags.
.IP "T"
Go to the previous tag, if there were more than one matches for the current tag.
.IP "\(haO\(haN or \(haOn"
Search forward in the file for the N-th next OSC 8 hyperlink.
.IP "\(haO\(haP or \(haOp"
Search backward in the file for the N-th previous OSC 8 hyperlink.
.IP "\(haO\(haL or \(haOl"
Jump to the currently selected OSC 8 hyperlink.
.IP "= or \(haG or :f"
Prints some information about the file being viewed,
including its name
and the line number and byte offset of the bottom line being displayed.
If possible, it also prints the length of the file,
the number of lines in the file
and the percent of the file above the last displayed line.
.IP \-
Followed by one of the command line option letters (see OPTIONS below),
this will change the setting of that option
and print a message describing the new setting.
If a \(haP (CONTROL-P) is entered immediately after the dash,
the setting of the option is changed but no message is printed.
If the option letter has a numeric value (such as \-b or \-h),
or a string value (such as \-P or \-t),
a new value may be entered after the option letter.
If no new value is entered, a message describing
the current setting is printed and nothing is changed.
.IP \-\-
Like the \- command, but takes a long option name (see OPTIONS below)
rather than a single option letter.
Press ENTER or RETURN after typing the option name to change it.
You can enter just the beginning of an option name, 
then press TAB to find all option names which begin with that string.
A \(haP immediately after the second dash suppresses printing of a
message describing the new setting, as in the \- command.
.IP \-+
Followed by one of the command line option letters
this will reset the option to its default setting
and print a message describing the new setting.
(The "\-+\fIX\fP" command does the same thing
as "\-+\fIX\fP" on the command line.)
This does not work for string-valued options.
.IP \-\-+
Like the \-+ command, but takes a long option name
rather than a single option letter.
.IP \-!
Followed by one of the command line option letters,
this will reset the option to the "opposite" of its default setting
and print a message describing the new setting.
This does not work for numeric or string-valued options.
.IP \-\-!
Like the \-!\& command, but takes a long option name
rather than a single option letter.
.IP _
(Underscore.)
Followed by one of the command line option letters,
this will print a message describing the current setting of that option.
The setting of the option is not changed.
.IP __
(Double underscore.)
Like the _ (underscore) command, but takes a long option name
rather than a single option letter.
You must press ENTER or RETURN after typing the option name.
.IP +cmd
Causes the specified cmd to be executed each time a new file is examined.
For example, +G causes
.B less
to initially display each file starting at the end
rather than the beginning.
.IP V
Prints the version number of
.B less
being run.
.IP "q or Q or :q or :Q or ZZ"
Exits
.BR less .
.PP
The following
seven
commands may or may not be valid, depending on your particular installation.
.
.IP v
Invokes an editor to edit the current file being viewed.
The editor is taken from the environment variable VISUAL if defined,
or EDITOR if VISUAL is not defined,
or defaults to "vi" if neither VISUAL nor EDITOR is defined.
See also the discussion of LESSEDIT under the section on PROMPTS below.
.IP "! shell-command"
Invokes a shell to run the shell-command given.
A percent sign (%) in the command is replaced by the name of the
current file.
A pound sign (#) is replaced by the name of the previously examined file.
"!!" repeats the last shell command.
"!" with no shell command invokes an interactive shell.
If a \(haP (CONTROL-P) is entered immediately after the !,
no "done" message is printed after the shell command is executed.
On Unix systems, the shell is taken from the environment variable SHELL,
or defaults to "sh".
On MS-DOS, Windows, and OS/2 systems, the shell is the normal command processor.
.IP "# shell-command"
Similar to the "!" command, 
except that the command is expanded in the same way as prompt strings.
For example, the name of the current file would be given as "%f".
.IP "| <m> shell-command"
<m> represents any mark letter.
Pipes a section of the input file to the given shell command.
The section of the file to be piped is between the position marked by
the letter and the current screen.
The entire current screen is included, regardless of whether the
marked position is before or after the current screen.
<m> may also be \(ha or $ to indicate beginning or end of file respectively.
If <m> is \&.\& or newline, the current screen is piped.
If a \(haP (CONTROL-P) is entered immediately after the mark letter,
no "done" message is printed after the shell command is executed.
.IP "s filename"
Save the input to a file.
This works only if the input is a pipe, not an ordinary file.
.IP "\(haO\(haO"
.RS
Run a shell command to open the URI in the current OSC 8 hyperlink,
selected by a previous \(haO\(haN or \(haO\(haP command.
To find the shell command,
the environment variable named "LESS_OSC8_xxx" is read, 
where "xxx" is the scheme from the URI (the part before the first colon),
or is empty if there is no colon in the URI.
The value of the environment variable is then expanded in the same way as 
prompt strings (in particular, any instance of "%o" is replaced with the URI)
to produce an OSC 8 "handler" shell command.
The standard output from the handler is an "opener" shell command 
which is then executed to open the URI.
.PP
There are two special cases:
.RS
.IP 1.
If the URI begins with "#", the remainder of the URI is taken to be 
the value of the id parameter in another OSC 8 link in the same file,
and \(haO\(haO will simply jump to that link.
.IP 2.
If the opener begins with the characters ":e" followed by 
whitespace and a filename,
then instead of running the opener as a shell command,
the specified filename is opened in the current instance of
.BR less .
.RE
.PP
In a simple case where the opener accepts the complete URI
as a command line parameter, the handler may be as simple as
.nf
.sp
echo mybrowser '%o'
.sp
.fi
In other cases, the URI may need to be modified, so the handler
may have to do some manipulation of the %o value.
.PP
If the LESS_OSC8_xxx variable is not set, the variable LESS_OSC8_ANY is tried. 
If neither LESS_OSC8_xxx nor LESS_OSC8_ANY is set, 
links using the "xxx" scheme cannot be opened. 
However, there are default handlers for the 
schemes "man" (used when LESS_OSC8_man is not set)
and "file" (used when LESS_OSC8_file is not set),
which should work on systems which provide the
.BR sed (1)
command and a shell with syntax compatible with the Bourne shell
.BR sh (1).
If you use LESS_OSC8_ANY to override LESS_OSC8_file, you must 
set LESS_OSC8_file to "-" to indicate that the default value 
should not be used, and likewise for LESS_OSC8_man.
.PP
The URI passed to an OSC8 handler via %o is guaranteed not to contain any single quote
or double quote characters, but it may contain any other shell metacharacters
such as semicolons, dollar signs, ampersands, etc.
The handler should take care to appropriately quote parameters in the opener command,
to prevent execution of unintended shell commands in the case of opening
a URI which contains shell metacharacters.
Also, since the handler command is expanded like a command prompt,
any metacharacters interpreted by prompt expansion 
(such as percent, dot, colon, backslash, etc.) must be escaped with a backslash
(see the PROMPTS section for details).
.RE
.IP "\(haX"
When the "Waiting for data" message is displayed,
such as while in the F command, pressing \(haX
will stop
.B less
from waiting and return to a prompt.
This may cause
.B less
to think that the file ends at the current position,
so it may be necessary to use the R or F command to see more data.
The \-\-intr option can be used to specify a different character
to use instead of \(haX.
This command works only on systems that support the
.BR poll (2)
function.
On systems without
.BR poll (2),
the interrupt character (usually \(haC) can be used instead.
.
.SH OPTIONS
Command line options are described below.
Most options may be changed while
.B less
is running, via the "\-" command.
.PP
Some options may be given in one of two forms:
either a dash followed by a single letter,
or two dashes followed by a long option name.
A long option name may be abbreviated as long as
the abbreviation is unambiguous.
For example, \-\-mouse may be abbreviated \-\-mou, but not
\-\-mo, since both \-\-mouse and \-\-modelines begin with \-\-mo.
Some long option names are in uppercase, such as \-\-QUIT-AT-EOF, as
distinct from \-\-quit-at-eof.
Such option names need only have their first letter capitalized;
the remainder of the name may be in either case.
For example, \-\-Quit-at-eof is equivalent to \-\-QUIT-AT-EOF.
.PP
Options are also taken from the environment variable "LESS".
For example,
to avoid typing "less \-options \&...\&" each time
.B less
is invoked, you might tell
.BR csh :
.sp
setenv LESS "\-options"
.sp
or if you use
.BR sh :
.sp
LESS="\-options"; export LESS
.sp
On MS-DOS and Windows, you don't need the quotes, but you should 
be careful that any percent signs in the options string are not
interpreted as an environment variable expansion.
.sp
The environment variable is parsed before the command line,
so command line options override the LESS environment variable.
If an option appears in the LESS variable, it can be reset
to its default value on the command line by beginning the command
line option with "\-+".
.sp
Some options like \-k or \-D require a string to follow the option letter.
The string for that option is considered to end when a dollar sign ($) is found.
For example, you can set two \-D options like this:
.sp
LESS="Dnwb$Dsbw"
.sp
If the \-\-use-backslash option appears earlier in the options, then
a dollar sign or backslash may be included literally in an option string
by preceding it with a backslash.
If the \-\-use-backslash option is not in effect, then backslashes are
not treated specially, and there is no way to include a dollar sign
in the option string.
.IP "\-? or \-\-help"
This option displays a summary of the commands accepted by
.B less
(the same as the h command).
(Depending on how your shell interprets the question mark,
it may be necessary to quote the question mark, thus: "\-\e?".)
.IP "\-a or \-\-search-skip-screen"
By default, forward searches start at the top of the displayed screen
and backwards searches start at the bottom of the displayed screen
(except for repeated searches invoked by the n or N commands,
which start after or before the "target" line respectively;
see the \-j option for more about the target line).
The \-a option causes forward searches to instead start at
the bottom of the screen
and backward searches to start at the top of the screen,
thus skipping all lines displayed on the screen.
.IP "\-A or \-\-SEARCH-SKIP-SCREEN"
Causes all forward searches (not just non-repeated searches)
to start just after the target line, and all backward searches
to start just before the target line.
Thus, forward searches will skip part of the displayed screen
(from the first line up to and including the target line).
Similarly backwards searches will skip the displayed screen
from the last line up to and including the target line.
This was the default behavior in less versions prior to 441.
.IP "\-b\fIn\fP or \-\-buffers=\fIn\fP"
Specifies the amount of buffer space
.B less
will use for each file, in units of kilobytes (1024 bytes).
By default 64\ KB of buffer space is used for each file
(unless the file is a pipe; see the \-B option).
The \-b option specifies instead that \fIn\fP kilobytes of
buffer space should be used for each file.
If \fIn\fP is \-1, buffer space is unlimited; that is,
the entire file can be read into memory.
.IP "\-B or \-\-auto-buffers"
By default, when data is read from a pipe,
buffers are allocated automatically as needed.
If a large amount of data is read from the pipe, this can cause
a large amount of memory to be allocated.
The \-B option disables this automatic allocation of buffers for pipes,
so that only 64\ KB
(or the amount of space specified by the \-b option)
is used for the pipe.
Warning: use of \-B can result in erroneous display, since only the
most recently viewed part of the piped data is kept in memory;
any earlier data is lost.
Lost characters are displayed as question marks.
.IP "\-c or \-\-clear-screen"
Causes full screen repaints to be painted from the top line down.
By default,
full screen repaints are done by scrolling from the bottom of the screen.
.IP "\-C or \-\-CLEAR-SCREEN"
Same as \-c, for compatibility with older versions of
.BR less .
.IP "\-d or \-\-dumb"
The \-d option suppresses the error message
normally displayed if the terminal is dumb;
that is, lacks some important capability,
such as the ability to clear the screen or scroll backward.
The \-d option does not otherwise change the behavior of
.B less
on a dumb terminal.
.IP "\-D\fBx\fP\fIcolor\fP or \-\-color=\fBx\fP\fIcolor\fP"
Changes the color of different parts of the displayed text.
\fBx\fP is a single character which selects the type of text 
whose color is being set:
.RS
.IP "B"
Binary characters.
.IP "C"
Control characters.
.IP "E"
Errors and informational messages.
.IP "H"
Header lines and columns, set via the \-\-header option.
.IP "M"
Mark letters in the status column.
.IP "N"
Line numbers enabled via the \-N option.
.IP "P"
Prompts.
.IP "R"
The rscroll character.
.IP "S"
Search results.
.IP "W"
The highlight enabled via the \-w option.
.IP "1-5"
The text in a search result which matches
the first through fifth parenthesized sub-pattern.
Sub-pattern coloring works only if
.B less 
is built with one of the regular expression libraries
.BR posix ", " pcre ", or " pcre2 .
.IP "d"
Bold text.
.IP "k"
Blinking text.
.IP "s"
Standout text.
.IP "u"
Underlined text.
.RE

.RS
The uppercase letters and digits can be used only when the \-\-use-color option is enabled.
When text color is specified by both an uppercase letter and a lowercase letter,
the uppercase letter takes precedence. 
For example, error messages are normally displayed as standout text.
So if both "s" and "E" are given a color, the "E" color applies
to error messages, and the "s" color applies to other standout text.
The lowercase letters refer to bold and underline text formed by 
overstriking with backspaces (see the \-U option) and to non-content
text (such as line numbers and prompts), 
but not to text formatted using ANSI escape sequences with the \-R option
(but see the note below for different behavior on Windows and MS-DOS).
.PP
A lowercase letter may be followed by a + to indicate that
the normal format change and the specified color should both be used.
For example, \-Dug displays underlined text as green without underlining;
the green color has replaced the usual underline formatting.
But \-Du+g displays underlined text as both green and in underlined format.
.PP
\fIcolor\fP is either a 4-bit color string or an 8-bit color string:
.PP
A 4-bit color string is one or two characters, where 
the first character specifies the foreground color and 
the second specifies the background color as follows:
.IP "b"
Blue
.IP "c"
Cyan
.IP "g"
Green
.IP "k"
Black
.IP "m"
Magenta
.IP "r"
Red
.IP "w"
White
.IP "y"
Yellow
.PP
The corresponding uppercase letter denotes a brighter shade of the color.
For example, \-DNGk displays line numbers as bright green text on a black 
background, and \-DEbR displays error messages as blue text on a 
bright red background.
If either character is a "-" or is omitted, the corresponding color 
is set to that of normal text.
.PP
An 8-bit color string is one or two decimal integers separated by a dot,
where the first integer specifies the foreground color and 
the second specifies the background color.
Each integer is a value between 0 and 255 inclusive which selects
a "CSI 38;5" color value (see
.UR https://en.wikipedia.org/wiki/ANSI_escape_code#SGR
.UE ).
If either integer is a "-" or is omitted,
the corresponding color is set to that of normal text.
.PP
A 4-bit or 8-bit color string may be followed by one or more of the
following characters to set text attributes in addition to the color.
.IP "s or ~"
Standout (reverse video)
.IP "u or _"
Underline
.IP "d or *"
Bold
.IP "l or &"
Blinking
.PP
On MS-DOS and Windows, the \-\-color option behaves
differently from what is described above in these ways:
.IP \(bu
The bold (d and *) and blinking (l and &) text attributes
at the end of a color string are not supported.
.IP \(bu
Lowercase color selector letters refer to text formatted by ANSI
escape sequences with \-R,
in addition to overstruck and non-content text (but see \-Da).
.IP \(bu
For historical reasons, when a lowercase color selector letter 
is followed by a numeric color value,
the number is not interpreted as an "CSI 38;5" color value as described above,
but instead as a 4-bit 
.nh
CHAR_INFO.Attributes 
.hy
value, between 0 and 15 inclusive
(see 
.UR https://learn.microsoft.com/en-us/windows/console/char-info-str
.UE ).

To avoid confusion, it is recommended that the equivalent letters rather than numbers
be used after a lowercase color selector on MS-DOS/Windows.
.IP \(bu
Numeric color values ("CSI 38;5" color) following an uppercase color selector letter 
are not supported on systems earlier than Windows 10.
.IP \(bu
Only a limited set of ANSI escape sequences to set color in the content work correctly.
4-bit color sequences work, but "CSI 38;5" color sequences do not.
.IP \(bu
The \-Da option makes the behavior of \-\-color 
more similar to its behavior on non-MS-DOS/Windows systems by (1)
making lowercase color selector letters not affect text formatted
with ANSI escape sequences, and (2)
allowing "CSI 38;5" color sequences in the content
work by passing them to the terminal (only on Windows 10 and later; on
earlier Windows systems, such sequences do not work regardless of the setting of \-Da).
.RE
.IP "\-e or \-\-quit-at-eof"
Causes
.B less
to automatically exit
the second time it reaches end-of-file.
By default, the only way to exit
.B less
is via the "q" command.
.IP "\-E or \-\-QUIT-AT-EOF"
Causes
.B less
to automatically exit the first time it reaches end-of-file.
.IP "\-f or \-\-force"
Forces non-regular files to be opened.
(A non-regular file is a directory or a device special file.)
Also suppresses the warning message when a binary file is opened.
By default,
.B less
will refuse to open non-regular files.
Note that some operating systems will not allow directories
to be read, even if \-f is set.
.IP "\-F or \-\-quit-if-one-screen"
Causes
.B less
to automatically exit
if the entire file can be displayed on the first screen.
Also see the description of the LESS_SHELL_LINES environment variable below.
.IP "\-g or \-\-hilite-search"
Normally,
.B less
will highlight ALL strings which match the last search command.
The \-g option changes this behavior to highlight only the particular string
which was found by the last search command.
This can cause
.B less
to run somewhat faster than the default.
.IP "\-G or \-\-HILITE-SEARCH"
The \-G option suppresses all highlighting of strings found by search commands.
.IP "\-h\fIn\fP or \-\-max-back-scroll=\fIn\fP"
Specifies a maximum number of lines to scroll backward.
If it is necessary to scroll backward more than \fIn\fP lines,
the screen is repainted in a forward direction instead.
(If the terminal does not have the ability to scroll
backward, \-h0 is implied.)
.IP "\-i or \-\-ignore-case"
Causes searches to ignore case; that is,
uppercase and lowercase are considered identical.
This option is ignored if any uppercase letters
appear in the search pattern;
in other words,
if a pattern contains uppercase letters, then that search does not ignore case.
.IP "\-I or \-\-IGNORE-CASE"
Like \-i, but searches ignore case even if
the pattern contains uppercase letters.
.IP "\-j\fIn\fP or \-\-jump-target=\fIn\fP"
Specifies a line on the screen where the "target" line
is to be positioned.
The target line is the line specified by any command to
search for a pattern, jump to a line number,
jump to a file percentage or jump to a tag.
The screen line may be specified by a number: the top line on the screen
is 1, the next is 2, and so on.
The number may be negative to specify a line relative to the bottom
of the screen: the bottom line on the screen is \-1, the second
to the bottom is \-2, and so on.
Alternately, the screen line may be specified as a fraction of the height
of the screen, starting with a decimal point: \&.5 is in the middle of the
screen, \&.3 is three tenths down from the first line, and so on.
If the line is specified as a fraction, the actual line number
is recalculated if the terminal window is resized.
If the \-\-header option is used and the target line specified by \-j
would be obscured by the header, the target line is moved to the first
line after the header.
.RS
.PP
If any form of the \-j option is used,
repeated forward searches (invoked with "n" or "N")
begin at the line immediately after the target line,
and repeated backward searches begin at the target line,
unless changed by \-a or \-A.
For example, if "\-j4" is used, the target line is the
fourth line on the screen, so forward searches begin at the fifth line
on the screen.
However nonrepeated searches (invoked with "/" or "?")
always begin at the start or end of the current screen respectively.
.RE
.IP "\-J or \-\-status-column"
Displays a status column at the left edge of the screen.
The character displayed in the status column may be one of:
.RS
.IP ">"
The line is chopped with the \-S option, and 
the text that is chopped off beyond the right edge of the screen
contains a match for the current search.
.IP "<"
The line is horizontally shifted, and
the text that is shifted beyond the left side of the screen
contains a match for the current search.
.IP "="
The line is both chopped and shifted,
and there are matches beyond both sides of the screen.
.IP "*"
There are matches in the visible part of the line
but none to the right or left of it.
.IP "a-z, A-Z"
The line has been marked with the corresponding letter via the m or M command.
.RE
.IP "\-k\fIfilename\fP or \-\-lesskey-file=\fIfilename\fP"
Causes
.B less
to open and interpret the named file as a
.BR lesskey (1)
binary file.
Multiple \-k options may be specified.
If the LESSKEY or LESSKEY_SYSTEM environment variable is set, or
if a lesskey file is found in a standard place (see KEY BINDINGS),
it is also used as a
.B lesskey
file.
Note the warning under "\-\-lesskey-content" below.
.IP "\-\-lesskey-src=\fIfilename\fP"
Causes
.B less
to open and interpret the named file as a 
.BR lesskey (1)
source file. 
If the LESSKEYIN or LESSKEYIN_SYSTEM environment variable is set, or
if a lesskey source file is found in a standard place (see KEY BINDINGS),
it is also used as a lesskey source file.
Prior to version 582, the
.B lesskey
program needed to be run to convert a lesskey 
.I source
file to a lesskey 
.I binary
file for
.B less
to use.
Newer versions of
.B less
read the lesskey source
file directly and ignore the binary file if the source file exists.
Note the warning under "\-\-lesskey-content" below.
.IP "\-\-lesskey-content=\fItext\fP"
Causes
.B less
to interpret the specified text as the contents of a
.BR lesskey (1)
source file.
In the text,
.B lesskey
lines may be separated by either newlines as usual, or by semicolons.
A literal semicolon may be represented by a backslash followed by a semicolon.
.sp
Warning: certain environment variables such as 
LESS, LESSSECURE, LESSCHARSET and others,
which are used early in startup, 
cannot be set in a file specified by a command line option
(\-\-lesskey, \-\-lesskey-src or \-\-lesskey-content).  When using a
.B lesskey
file to set environment variables, it is safer to use the
default lesskey file, or to specify the file using the
LESSKEYIN or LESSKEY_CONTENT environment variables rather than using 
a command line option.
.IP "\-K or \-\-quit-on-intr"
Causes
.B less
to exit immediately (with status 2)
when an interrupt character (usually \(haC) is typed.
Normally, an interrupt character causes
.B less
to stop whatever it is doing and return to its command prompt.
Note that use of this option makes it impossible to return to the
command prompt from the "F" command.
.IP "\-L or \-\-no-lessopen"
Ignore the LESSOPEN environment variable
(see the INPUT PREPROCESSOR section below).
This option can be set from within
.BR less ,
but it will apply only to files opened subsequently, not to the
file which is currently open.
.IP "\-m or \-\-long-prompt"
Causes
.B less
to prompt verbosely (like 
.BR more (1)),
with the percent into the file.
By default,
.B less
prompts with a colon.
.IP "\-M or \-\-LONG-PROMPT"
Causes
.B less
to prompt even more verbosely than
.BR more (1).
.IP "\-n or \-\-line-numbers"
Suppresses line numbers.
The default (to use line numbers) may cause
.B less
to run more slowly in some cases, especially with a very large input file.
Using line numbers means: the line number will be displayed in the verbose
prompt and in the = command,
and the v command will pass the current line number to the editor
(see also the discussion of LESSEDIT in PROMPTS below).
.IP "\-N or \-\-LINE-NUMBERS"
Causes a line number to be displayed at the beginning of
each line in the display.
.IP "\-o\fIfilename\fP or \-\-log-file=\fIfilename\fP"
Causes
.B less
to copy its input to the named file as it is being viewed.
This applies only when the input file is a pipe,
not an ordinary file.
If the file already exists,
.B less
will ask for confirmation before overwriting it.
.IP "\-O\fIfilename\fP or \-\-LOG-FILE=\fIfilename\fP"
The \-O option is like \-o, but it will overwrite an existing
file without asking for confirmation.
.sp
If no log file has been specified,
the \-o and \-O options can be used from within
.B less
to specify a log file.
Without a file name, they will simply report the name of the log file.
The "s" command is equivalent to specifying \-o from within
.BR less .
.IP "\-p\fIpattern\fP or \-\-pattern=\fIpattern\fP"
The \-p option on the command line is equivalent to
specifying +/\fIpattern\fP;
that is, it tells
.B less
to start at the first occurrence of \fIpattern\fP in the file.
.IP "\-P\fIprompt\fP or \-\-prompt=\fIprompt\fP"
Provides a way to tailor the three prompt
styles to your own preference.
This option would normally be put in the LESS environment
variable, rather than being typed in with each
.B less
command.
Such an option must either be the last option in the LESS variable,
or be terminated by a dollar sign.
 \-Ps followed by a string changes the default (short) prompt
to that string.
 \-Pm changes the medium (\-m) prompt.
 \-PM changes the long (\-M) prompt.
 \-Ph changes the prompt for the help screen.
 \-P= changes the message printed by the = command.
 \-Pw changes the message printed while waiting for data (in the "F" command).
.sp 1
All prompt strings consist of a sequence of
letters and special escape sequences.
See the section on PROMPTS for more details.
.IP "\-q or \-\-quiet or \-\-silent"
Causes moderately "quiet" operation:
the terminal bell is not rung
if an attempt is made to scroll past the end of the file
or before the beginning of the file.
If the terminal has a "visual bell", it is used instead.
The bell will be rung on certain other errors,
such as typing an invalid character.
The default is to ring the terminal bell in all such cases.
.IP "\-Q or \-\-QUIET or \-\-SILENT"
Causes totally "quiet" operation:
the terminal bell is never rung.
If the terminal has a "visual bell", it is used in all cases
where the terminal bell would have been rung.
.IP "\-r or \-\-raw-control-chars"
Causes "raw" control characters to be displayed.
The default is to display control characters using the caret notation;
for example, a control-A (octal 001) is displayed as "\(haA"
(with some exceptions as described under the \-U option).
Warning: when the \-r option is used,
.B less
cannot keep track of the actual appearance of the screen
(since this depends on how the screen responds to
each type of control character).
Thus, various display problems may result,
such as long lines being split in the wrong place.
.sp
USE OF THE \-r OPTION IS DANGEROUS AND IS NOT RECOMMENDED.
.br
The \-r option can be set on the command line or via the \- command, 
but to avoid unintentional use, it cannot be set in a LESS environment variable.
If \-r appears in a LESS environment variable, it is treated as if it were \-R.
.IP "\-R or \-\-RAW-CONTROL-CHARS"
Like \-r, but only a limited set of escape 
sequences are output in "raw" form.
Unlike \-r, the screen appearance is maintained correctly.
The sequences which are output raw are:
.sp
1. ANSI SGR ("color") sequences
.sp
2. OSC 8 hyperlinks
.sp
3. Other OSC sequences, if the OSC type number is listed in
the LESSANSIOSCALLOW environment variable
.sp
4. OSC sequences starting with a non-standard introductory character
(that is, something other than "]"), if the character is listed in
the LESSANSIOSCCHARS environment variable followed by an asterisk
.sp
ANSI color escape sequences are sequences of the form:
.sp
	ESC [ \&...\& m
.sp
where the "...\&" is zero or more color specification characters.
Color escape sequences are only supported when the color
is changed within one line, not across lines. 
In other words, the beginning of each line is assumed to be
normal (non-colored), regardless of any escape sequences in previous lines.
.sp
You can make
.B less
think that characters other than "m" can end ANSI color escape sequences
by setting the environment variable LESSANSIENDCHARS to the list of
characters which can end a color escape sequence.
And you can make
.B less
think that characters other than the standard ones may appear between
the ESC and the m by setting the environment variable LESSANSIMIDCHARS
to the list of characters which can appear.
.sp
OSC sequences are of the form:
.sp
	ESC ] N ; \&...\& \\7
.sp
where the OSC type number N is a decimal integer.
The terminating sequence may be either a BEL character (\\7) 
as above, or the two-character sequence "ESC \\".
.IP "\-s or \-\-squeeze-blank-lines"
Causes consecutive blank lines to be squeezed into a single blank line.
This is useful when viewing
.BR nroff (1)
output.
.IP "\-S or \-\-chop-long-lines"
Causes lines longer than the screen width to be
chopped (truncated) rather than wrapped.
That is, the portion of a long line that does not fit in
the screen width is not displayed until you press RIGHT-ARROW.
The default is to wrap long lines; that is, display the remainder
on the next line.
See also the \-\-wordwrap option.
While the \-\-header option is active, the \-S option is ignored,
and lines longer than the screen width are truncated.
.IP "\-t\fItag\fP or \-\-tag=\fItag\fP"
The \-t option, followed immediately by a TAG,
will edit the file containing that tag.
For this to work, tag information must be available;
for example, there may be a file in the current directory called "tags",
which was previously built by
.BR ctags (1)
or an equivalent command.
If the environment variable LESSGLOBALTAGS is set, it is taken to be
the name of a command compatible with
.BR global (1),
and that command is executed to find the tag.
(See 
.UR http://www.gnu.org/software/global/global.html
.UE ).
The \-t option may also be specified from within
.B less
(using the \- command) as a way of examining a new file.
The command ":t" is equivalent to specifying \-t from within
.BR less .
.IP "\-T\fItagsfile\fP or \-\-tag-file=\fItagsfile\fP"
Specifies a tags file to be used instead of "tags".
.IP "\-u or \-\-underline-special"
Causes backspaces and carriage returns to be treated as printable characters;
that is, they are sent to the terminal when they appear in the input.
.IP "\-U or \-\-UNDERLINE-SPECIAL"
Causes backspaces, tabs, carriage returns and "formatting characters"
(as defined by Unicode) to be treated as control characters;
that is, they are handled as specified by the \-r option.
.sp
By default, if neither \-u nor \-U is given,
backspaces which appear adjacent to an underscore character
are treated specially:
the underlined text is displayed
using the terminal's hardware underlining capability.
Also, backspaces which appear between two identical characters
are treated specially:
the overstruck text is printed
using the terminal's hardware boldface capability.
Other backspaces are deleted, along with the preceding character.
Carriage returns immediately followed by a newline are deleted.
Other carriage returns are handled as specified by the \-r option.
Unicode formatting characters, such as the Byte Order Mark,
are sent to the terminal.
Text which is overstruck or underlined can be searched for
if neither \-u nor \-U is in effect.
.sp
See also the \-\-proc-backspace, \-\-proc-tab,
and \-\-proc-return options.
.IP "\-V or \-\-version"
Displays the version number of
.BR less .
.IP "\-w or \-\-hilite-unread"
Temporarily highlights the first "new" line after a forward movement
of a full page.
The first "new" line is the line immediately following the line previously
at the bottom of the screen.
Also highlights the target line after a g or p command.
The highlight is removed at the next command which causes movement.
If the \-\-status-line option is in effect, the entire line
(the width of the screen) is highlighted.
Otherwise, only the text in the line is highlighted,
unless the \-J option is in effect,
in which case only the status column is highlighted.
.IP "\-W or \-\-HILITE-UNREAD"
Like \-w, but temporarily highlights the first new line after any
forward movement command larger than one line.
.IP "\-x\fIn\fP,...\& or \-\-tabs=\fIn\fP,..."
Sets tab stops.
If only one \fIn\fP is specified, tab stops are set at multiples of \fIn\fP.
If multiple values separated by commas are specified, tab stops
are set at those positions, and then continue with the same spacing as the
last two.
For example, "-x9,17" will set tabs at positions 9, 17, 25, 33, etc.
The default for \fIn\fP is 8.
.IP "\-X or \-\-no-init"
Disables sending the termcap initialization and deinitialization strings
to the terminal.
This is sometimes desirable if the deinitialization string does
something unnecessary, like clearing the screen.
.IP "\-y\fIn\fP or \-\-max-forw-scroll=\fIn\fP"
Specifies a maximum number of lines to scroll forward.
If it is necessary to scroll forward more than \fIn\fP lines,
the screen is repainted instead.
The \-c or \-C option may be used to repaint from the top of
the screen if desired.
By default, any forward movement causes scrolling.
.IP "\-z\fIn\fP or \-\-window=\fIn\fP or \-\fIn\fP"
Changes the default scrolling window size to \fIn\fP lines.
The default is one screenful.
The z and w commands can also be used to change the window size.
The "z" may be omitted for compatibility with some versions of
.BR more (1).
If the number
.I n
is negative, it indicates
.I n
lines less than the current screen size.
For example, if the screen is 24 lines, \fI\-z\-4\fP sets the
scrolling window to 20 lines.  If the screen is resized to 40 lines,
the scrolling window automatically changes to 36 lines.
.IP "\-\(dq\fIcc\fP\ or\ \-\-quotes=\fIcc\fP"
Changes the filename quoting character.
This may be necessary if you are trying to name a file
which contains both spaces and quote characters.
Followed by a single character, this changes the quote character to that
character.
Filenames containing a space should then be surrounded by that character
rather than by double quotes.
Followed by two characters, changes the open quote to the first character,
and the close quote to the second character.
Filenames containing a space should then be preceded by the open quote
character and followed by the close quote character.
Note that even after the quote characters are changed, this option
remains \-" (a dash followed by a double quote).
.IP "\-\(ti or \-\-tilde"
Normally lines after end of file are displayed as a single tilde (\(ti).
This option causes lines after end of file to be displayed as blank lines.
.IP "\-# or \-\-shift"
Specifies the default number of positions to scroll horizontally
in the RIGHTARROW and LEFTARROW commands.
If the number specified is zero, it sets the default number of
positions to one half of the screen width.
Alternately, the number may be specified as a fraction of the width
of the screen, starting with a decimal point: \&.5 is half of the
screen width, \&.3 is three tenths of the screen width, and so on.
If the number is specified as a fraction, the actual number of
scroll positions is recalculated if the terminal window is resized.
.IP "\-\-exit-follow-on-close"
When using the "F" command on a pipe,
.B less
will automatically stop waiting for more data when the input side of the 
pipe is closed.
.IP "\-\-file-size"
If \-\-file-size is specified,
.B less
will determine the size of the file 
immediately after opening the file.
Then the "=" command will display the number of lines in the file.
Normally this is not done, because it can be slow if the input file 
is non-seekable (such as a pipe) and is large.
.IP "\-\-follow-name"
Normally, if the input file is renamed while an F command is executing,
.B less
will continue to display the contents of the original file despite
its name change.
If \-\-follow-name is specified, during an F command
.B less
will periodically attempt to reopen the file by name.
If the reopen succeeds and the file is a different file from the original
(which means that a new file has been created
with the same name as the original (now renamed) file),
.B less
will display the contents of that new file.
.IP "\-\-form-feed"
When scrolling forward or backward in the file,
stop if a line beginning with a form feed character (\(haL) is reached.
This can be useful when viewing a file which uses form feeds between pages.
.IP "\-\-header=\fIL\fP,\fIC\fP,\fIN\fP"
.RS
Sets the number of header lines and columns displayed on the screen.
The number of header lines is set to \fIL\fP.
If \fIL\fP is 0, header lines are disabled.
If \fIL\fP is empty or missing, the number of header lines is unchanged.
The number of header columns is set to \fIC\fP.
If \fIC\fP is 0, header columns are disabled.
If \fIC\fP is empty or missing, the number of header columns is unchanged.
The first header line is set to line number \fIN\fP in the file.
If \fIN\fP is empty or missing, it is taken to be 
the number of the line currently displayed in the first line of the screen
(if the \-\-header command has been issued from within
.BR less "),"
or 1 (if the \-\-header option has been given on the command line).
The special form "\-\-header=\-" disables header lines and header columns, 
and is equivalent to "\-\-header=0,0".
.PP
When \fIL\fP is nonzero, the first \fIL\fP lines at the top
of the screen are replaced with the \fIL\fP lines of the file beginning at line \fIN\fP,
regardless of what part of the file is being viewed.
When header lines are displayed, any file contents before the header line cannot be viewed.
When \fIC\fP is nonzero, the first \fIC\fP characters displayed at the 
beginning of each line are replaced with the first \fIC\fP characters of the line,
even if the rest of the line is scrolled horizontally.
.PP
While the \-\-header option is active, 
lines longer than the screen width are truncated, 
and the \-S option is ignored.
.RE
.IP "\-\-incsearch"
Subsequent search commands will be "incremental"; that is,
.B less
will advance to the next line containing the search pattern 
as each character of the pattern is typed in.
.IP "\-\-intr=\fIc\fP"
Use the character \fIc\fP instead of \(haX to interrupt a read
when the "Waiting for data" message is displayed.
\fIc\fP must be an ASCII character; that is, one with a value 
between 1 and 127 inclusive.
A caret followed by a single character can be used 
to specify a control character.
.IP "\-\-line-num-width=\fIn\fP"
Sets the minimum width of the line number field when the \-N option is in effect 
to \fIn\fP characters.
The default is 7.
.IP "\-\-match-shift=\fIn\fP"
When \-S is in effect, if a search match is not visible
because it is shifted to the left or right of the currently
visible screen, the text will horizontally shift 
to ensure that the search match is visible.
This option selects the column in which the first character
of the search match will be placed after the shift.
In other words, there will be \fIn\fP characters visible 
to the left of the search match.

Alternately, the number may be specified as a fraction of the width
of the screen, starting with a decimal point: \&.5 is half of the
screen width, \&.3 is three tenths of the screen width, and so on.
If the number is specified as a fraction, the actual number of
scroll positions is recalculated if the terminal window is resized.
.IP "\-\-modelines=\fIn\fP"
.RS
Before displaying a file,
.B less 
will read the first \fIn\fP lines to try to find a vim-compatible 
.IR modeline . 
If \fIn\fP is zero,
.B less
does not try to find modelines.
By using a modeline, the file itself can specify the tab stops 
that should be used when viewing it.
.PP
A modeline contains, anywhere in the line, 
a program name ("vi", "vim", "ex", or "less"),
followed by a colon,
possibly followed by the word "set",
and finally followed by zero or more option settings.
If the word "set" is used,
option settings are separated by spaces, and end at the first colon.
If the word "set" is not used, 
option settings may be separated by either spaces or colons.
The word "set" is required if the program name is "less"
but optional if any of the other three names are used.
If any option setting is of the form "tabstop=\fIn\fP" or "ts=\fIn\fP",
then tab stops are automatically set as if \-\-tabs=\fIn\fP had been given.
See the \-\-tabs description for acceptable values of \fIn\fP.
.RE
.IP "\-\-mouse"
Enables mouse input:
scrolling the mouse wheel down moves forward in the file,
scrolling the mouse wheel up moves backwards in the file,
left-click sets the "#" mark to the line where the mouse is clicked,
and right-click (or any other) returns to the "#" mark position.
Holding down the left button and dragging also moves in the file.
If a left-click is performed with the mouse cursor on an OSC 8 hyperlink,
the hyperlink is selected as if by the \(haO\(haN command.
If a left-click is performed with the mouse cursor on an OSC 8 hyperlink
which is already selected, the hyperlink is opened as if by the \(haO\(haO command.
The number of lines to scroll when the wheel is moved
can be set by the \-\-wheel-lines option.
Mouse input works only on terminals which support X11 mouse reporting,
and on the Windows version of
.BR less .
.IP "\-\-MOUSE"
Like \-\-mouse, except the direction scrolled
on mouse wheel movement is reversed.
.IP "\-\-no-edit-warn"
Don't print a warning message when using the v command
on a file which was opened using a LESSOPEN preprocessor
(see the INPUT PREPROCESSOR section below).
.IP "\-\-no-keypad"
Disables sending the keypad initialization and deinitialization strings
to the terminal.
This is sometimes useful if the keypad strings make the numeric
keypad behave in an undesirable manner.
.IP "\-\-no-histdups"
This option changes the behavior so that if a search string or
file name is typed in, and the same string is already in the history list,
the existing copy is removed from the history list before the new one is added.
Thus, a given string will appear only once in the history list.
Normally, a string may appear multiple times.
.IP "\-\-no-number-headers"
Header lines (defined via the \-\-header option) are not assigned line numbers.
Line number 1 is assigned to the first line after any header lines.
.IP "\-\-no-paste"
If the terminal supports xterm-compatible "bracketed paste",
any text pasted into
.B less
is ignored, except that one line of text may be pasted into the command line 
at the bottom of the screen (search strings, file names, etc).
That is, the first newline of text pasted into the command line
and any text that follows it is ignored.
.IP "\-\-no-search-header-lines"
Searches do not include header lines, but still include header columns.
.IP "\-\-no-search-header-columns"
Searches do not include header columns, but still include header lines.
.IP "\-\-no-search-headers"
Searches do not include header lines or header columns.
.IP "\-\-no-vbell"
Disables the terminal's visual bell.
.IP "\-\-proc-backspace"
If set, backspaces are handled as if neither the \-u option 
nor the \-U option were set.
That is, a backspace adjacent to an underscore causes text to be
displayed in underline mode, and a backspace between identical
characters cause text to be displayed in boldface mode.
This option overrides the \-u and \-U options, so that display of
backspaces can be controlled separate from tabs and carriage returns.
If not set, backspace display is controlled by the \-u and \-U options.
.IP "\-\-PROC-BACKSPACE"
If set, backspaces are handled as if the \-U option were set;
that is backspaces are treated as control characters.
.IP "\-\-proc-return"
If set, carriage returns are handled as if neither the \-u option 
nor the \-U option were set.
That is, a carriage return immediately before a newline is deleted.
This option overrides the \-u and \-U options, so that display of
carriage returns can be controlled separate from that of backspaces and tabs.
If not set, carriage return display is controlled by the \-u and \-U options.
.IP "\-\-PROC-RETURN"
If set, carriage returns are handled as if the \-U option were set;
that is carriage returns are treated as control characters.
.IP "\-\-proc-tab"
If set, tabs are handled as if the \-U option were not set.
That is, tabs are expanded to spaces.
This option overrides the \-U option, so that display of
tabs can be controlled separate from that of backspaces and carriage returns.
If not set, tab display is controlled by the \-U option.
.IP "\-\-PROC-TAB"
If set, tabs are handled as if the \-U option were set;
that is tabs are treated as control characters.
.IP "\-\-redraw-on-quit"
When quitting, after sending the terminal deinitialization string,
redraws the entire last screen.
On terminals whose terminal deinitialization string causes the
terminal to switch from an alternate screen, 
this makes the last screenful of the current file remain visible after
.B less
has quit.
.IP "\-\-rscroll=\fIc\fP"
This option changes the character used to mark truncated lines.
It may begin with a two-character attribute indicator like LESSBINFMT does.
If there is no attribute indicator, standout is used.
If set to "\-", truncated lines are not marked.
.IP "\-\-save-marks"
Save marks in the history file, so marks are retained
across different invocations of
.BR less .
.IP "\-\-search-options=\fI...\fP"
Sets default search modifiers. 
The value is a string of one or more of the characters
E, F, K, N, R or W.
Setting any of these has the same effect as typing that
control character at the beginning of every search pattern.
For example, setting \-\-search-options=W is the same as
typing \(haW at the beginning of every pattern.
The value may also contain a digit between 1 and 5,
which has the same effect as typing \(haS followed by that digit
at the beginning of every search pattern.
The value "-" disables all default search modifiers.
.IP "\-\-show-preproc-errors"
If a preprocessor produces data, 
then exits with a non-zero exit code,
.B less
will display a warning.
.IP "\-\-status-col-width=\fIn\fP"
Sets the width of the status column when the \-J option is in effect.
The default is 2 characters.
.IP "\-\-status-line"
If a line is marked, the entire line (rather than just the status column)
is highlighted.
Also lines highlighted due to the \-w option will have
the entire line highlighted.
If \-\-use-color is set, the line is colored rather than highlighted.
.IP "\-\-use-backslash"
This option changes the interpretations of options which follow this one.
After the \-\-use-backslash option, any backslash in an option string is
removed and the following character is taken literally.
This allows a dollar sign to be included in option strings.
.IP "\-\-use-color"
Enables colored text in various places.
The \-D option can be used to change the colors.
Colored text works only if the terminal supports 
ANSI color escape sequences (as defined in 
.UR https://www.ecma-international.org/publications-and-standards/standards/ecma-48
.UE ).
.IP "\-\-wheel-lines=\fIn\fP"
Set the number of lines to scroll when the mouse wheel is scrolled
and the \-\-mouse or \-\-MOUSE option is in effect.
The default is 1 line.
.IP "\-\-wordwrap"
When the \-S option is not in use,
wrap each line at a space or tab if possible,
so that a word is not split between two lines.
The default is to wrap at any character.
.IP \-\-
A command line argument of "\-\-" marks the end of option arguments.
Any arguments following this are interpreted as filenames.
This can be useful when viewing a file whose name begins with a "\-" or "+".
.IP +
If a command line option begins with \fB+\fP,
the remainder of that option is taken to be an initial command to
.BR less .
For example, +G tells
.B less
to start at the end of the file rather than the beginning,
and +/xyz tells it to start at the first occurrence of "xyz" in the file.
As a special case, +<number> acts like +<number>g;
that is, it starts the display at the specified line number
(however, see the caveat under the "g" command above).
If the option starts with ++, the initial command applies to
every file being viewed, not just the first one.
The + command described previously
may also be used to set (or change) an initial command for every file.
.
.SH "LINE EDITING"
When entering a command line at the bottom of the screen
(for example, a filename for the :e command,
or the pattern for a search command),
certain keys can be used to manipulate the command line.
Most commands have an alternate form in [ brackets ] which can be used if
a key does not exist on a particular keyboard.
(Note that the forms beginning with ESC do not work
on some MS-DOS and Windows systems because ESC is the line erase character.)
Any of these special keys may be entered literally by preceding
it with the "literal" character, either \(haV or \(haA.
A backslash itself may also be entered literally by entering two backslashes.
.IP "LEFTARROW [ ESC-h ]"
Move the cursor one space to the left.
.IP "RIGHTARROW [ ESC-l ]"
Move the cursor one space to the right.
.IP "\(haLEFTARROW [ ESC-b or ESC-LEFTARROW ]"
(That is, CONTROL and LEFTARROW simultaneously.)
Move the cursor one word to the left.
.IP "\(haRIGHTARROW [ ESC-w or ESC-RIGHTARROW ]"
(That is, CONTROL and RIGHTARROW simultaneously.)
Move the cursor one word to the right.
.IP "HOME [ ESC-0 ]"
Move the cursor to the beginning of the line.
.IP "END [ ESC-$ ]"
Move the cursor to the end of the line.
.IP "BACKSPACE"
Delete the character to the left of the cursor,
or cancel the command if the command line is empty.
.IP "DELETE or [ ESC-x ]"
Delete the character under the cursor.
.IP "\(haBACKSPACE [ ESC-BACKSPACE ]"
(That is, CONTROL and BACKSPACE simultaneously.)
Delete the word to the left of the cursor.
.IP "\(haDELETE [ ESC-X or ESC-DELETE ]"
(That is, CONTROL and DELETE simultaneously.)
Delete the word under the cursor.
.IP "UPARROW [ ESC-k ]"
Retrieve the previous command line.
If you first enter some text and then press UPARROW,
it will retrieve the previous command which begins with that text.
.IP "DOWNARROW [ ESC-j ]"
Retrieve the next command line.
If you first enter some text and then press DOWNARROW,
it will retrieve the next command which begins with that text.
.IP "TAB"
Complete the partial filename to the left of the cursor.
If it matches more than one filename, the first match
is entered into the command line.
Repeated TABs will cycle thru the other matching filenames.
If the completed filename is a directory, a "/" is appended to the filename.
(On MS-DOS and Windows systems, a "\e" is appended.)
The environment variable LESSSEPARATOR can be used to specify a
different character to append to a directory name.
.IP "BACKTAB [ ESC-TAB ]"
Like, TAB, but cycles in the reverse direction thru the matching filenames.
.IP "\(haL"
Complete the partial filename to the left of the cursor.
If it matches more than one filename, all matches are entered into
the command line (if they fit).
.IP "\(haU (Unix and OS/2) or ESC (MS-DOS and Windows)"
Delete the entire command line,
or cancel the command if the command line is empty.
If you have changed your line-kill character in Unix to something
other than \(haU, that character is used instead of \(haU.
.IP "\(haG"
Delete the entire command line and return to the main prompt.
.
.SH "KEY BINDINGS"
You may define your own
.B less
commands by creating a lesskey source file.
This file specifies a set of command keys and an action
associated with each key.
You may also change the line-editing keys (see LINE EDITING),
and set environment variables used by
.BR less .
See the
.BR lesskey (1)
manual page for details about the file format.
.PP
If the environment variable LESSKEYIN is set,
.B less
uses that as the name of the lesskey source file.
Otherwise,
.B less
looks in a standard place for the lesskey source file:
On Unix systems,
.B less
looks for a lesskey file called "$XDG_CONFIG_HOME/lesskey" or "$HOME/.config/lesskey" or "$HOME/.lesskey".
On MS-DOS and Windows systems,
.B less
looks for a lesskey file called "$HOME/_lesskey", and if it is not found there,
then looks for a lesskey file called "_lesskey" in any directory specified
in the PATH environment variable.
On OS/2 systems,
.B less
looks for a lesskey file called "$HOME/lesskey.ini", and if it is not found,
then looks for a lesskey file called "lesskey.ini" in any directory specified
in the INIT environment variable, and if it not found there,
then looks for a lesskey file called "lesskey.ini" in any directory specified
in the PATH environment variable.
.PP
A system-wide lesskey source file may also be set up to provide key bindings.
If a key is defined in both a local lesskey file and in the
system-wide file, key bindings in the local file take precedence over
those in the system-wide file.
If the environment variable LESSKEYIN_SYSTEM is set,
.B less
uses that as the name of the system-wide lesskey file.
Otherwise,
.B less
looks in a standard place for the system-wide lesskey file:
On Unix systems, the system-wide lesskey file is /usr/local/etc/syslesskey.
(However, if
.B less
was built with a different sysconf directory than /usr/local/etc,
that directory is where the sysless file is found.)
On MS-DOS and Windows systems, the system-wide lesskey file is c:\e_syslesskey.
On OS/2 systems, the system-wide lesskey file is c:\esyslesskey.ini.
.PP
Older versions of
.B less
(before v582) used lesskey files with a binary format, produced by the
.B lesskey
program. It is no longer necessary to use the
.B lesskey
program.
.
.SH "INPUT PREPROCESSOR"
You may define an "input preprocessor" for
.BR less .
Before
.B less
opens a file, it first gives the input preprocessor a chance to modify the
way the contents of the file are displayed.
An input preprocessor is simply an executable program (or shell script),
which writes the contents of the file to a different file,
called the replacement file.
The contents of the replacement file are then displayed
in place of the contents of the original file.
However, it will appear to the user as if the original file is opened;
that is,
.B less
will display the original filename as the name of the current file.
.PP
An input preprocessor receives one command line argument, the original filename,
as entered by the user.
It should create the replacement file, and when finished,
print the name of the replacement file to its standard output.
If the input preprocessor does not output a replacement filename,
.B less
uses the original file, as normal.
The input preprocessor is not called when viewing standard input.
To set up an input preprocessor, set the LESSOPEN environment variable
to a command line which will invoke your input preprocessor.
This command line should include one occurrence of the string "%s",
which will be replaced by the filename
when the input preprocessor command is invoked.
.PP
When
.B less
closes a file opened in such a way, it will call another program,
called the input postprocessor,
which may perform any desired clean-up action (such as deleting the
replacement file created by LESSOPEN).
This program receives two command line arguments, the original filename
as entered by the user, and the name of the replacement file.
To set up an input postprocessor, set the LESSCLOSE environment variable
to a command line which will invoke your input postprocessor.
It may include two occurrences of the string "%s";
the first is replaced with the original name of the file and
the second with the name of the replacement file,
which was output by LESSOPEN.
.PP
For example, on many Unix systems, these two scripts will allow you
to keep files in compressed format, but still let
.B less
view them directly:
.PP
lessopen.sh:
.br
	#! /bin/sh
.br
	case "$1" in
.br
	*.Z)	TEMPFILE=$(mktemp)
.br
		uncompress \-c $1  >$TEMPFILE  2>/dev/null
.br
		if [ \-s $TEMPFILE ]; then
.br
			echo $TEMPFILE
.br
		else
.br
			rm \-f $TEMPFILE
.br
		fi
.br
		;;
.br
	esac
.PP
lessclose.sh:
.br
	#! /bin/sh
.br
	rm $2
.PP
To use these scripts, put them both where they can be executed and
set LESSOPEN="lessopen.sh\ %s", and
LESSCLOSE="lessclose.sh\ %s\ %s".
More complex LESSOPEN and LESSCLOSE scripts may be written
to accept other types of compressed files, and so on.
.PP
It is also possible to set up an input preprocessor to
pipe the file data directly to
.BR less ,
rather than putting the data into a replacement file.
This avoids the need to decompress the entire file before
starting to view it.
An input preprocessor that works this way is called an input pipe.
An input pipe, instead of writing the name of a replacement file on
its standard output,
writes the entire contents of the replacement file on its standard output.
If the input pipe does not write any characters on its standard output,
then there is no replacement file and
.B less
uses the original file, as normal.
To use an input pipe,
make the first character in the LESSOPEN environment variable a
vertical bar (|) to signify that the input preprocessor is an input pipe.
As with non-pipe input preprocessors, the command string must contain one
occurrence of %s, which is replaced with the filename of the input file.
.PP
For example, on many Unix systems, this script will work like the
previous example scripts:
.PP
lesspipe.sh:
.br
	#! /bin/sh
.br
	case "$1" in
.br
	*.Z)	uncompress \-c $1  2>/dev/null
.br
		;;
.br
	*)	exit 1
.br
		;;
.br
	esac
.br
	exit $?
.br
.PP
To use this script, put it where it can be executed and set
LESSOPEN="|lesspipe.sh %s".
.PP
Note that a preprocessor cannot output an empty file, since that
is interpreted as meaning there is no replacement, and
the original file is used.
To avoid this, if LESSOPEN starts with two vertical bars,
the exit status of the script determines the behavior when the output is empty.
If the output is empty and the exit status is zero, 
the empty output is considered to be replacement text.
If the output is empty and the exit status is nonzero, 
the original file is used.
For compatibility with previous versions of
.BR less ,
if LESSOPEN starts with only one vertical bar, the exit status
of the preprocessor is ignored.
.PP
When an input pipe is used, a LESSCLOSE postprocessor can be used,
but it is usually not necessary since there is no replacement file
to clean up.
In this case, the replacement file name passed to the LESSCLOSE
postprocessor is "\-".
.PP
For compatibility with previous versions of
.BR less ,
the input preprocessor or pipe is not used if
.B less
is viewing standard input.
However, if the first character of LESSOPEN is a dash (\-),
the input preprocessor is used on standard input as well as other files.
In this case, the dash is not considered to be part of
the preprocessor command.
If standard input is being viewed, the input preprocessor is passed
a file name consisting of a single dash.
Similarly, if the first two characters of LESSOPEN are vertical bar and dash
(|\-) or two vertical bars and a dash (||\-),
the input pipe is used on standard input as well as other files.
Again, in this case the dash is not considered to be part of
the input pipe command.
.
.SH "NATIONAL CHARACTER SETS"
There are three types of characters in the input file:
.IP "normal characters"
can be displayed directly to the screen.
.IP "control characters"
should not be displayed directly, but are expected to be found
in ordinary text files (such as backspace and tab).
.IP "binary characters"
should not be displayed directly and are not expected to be found
in text files.
.PP
A "character set" is simply a description of which characters are to
be considered normal, control, and binary.
The LESSCHARSET environment variable may be used to select a character set.
Possible values for LESSCHARSET are:
.IP ascii
BS, TAB, NL, CR, and formfeed are control characters,
all chars with values between 32 and 126 are normal,
and all others are binary.
.IP iso8859
Selects an ISO 8859 character set.
This is the same as ASCII, except characters between 160 and 255 are
treated as normal characters.
.IP latin1
Same as iso8859.
.IP latin9
Same as iso8859.
.IP dos
Selects a character set appropriate for MS-DOS.
.IP ebcdic
Selects an EBCDIC character set.
.IP IBM-1047
Selects an EBCDIC character set used by OS/390 Unix Services.
This is the EBCDIC analogue of latin1.  You get similar results
by setting either LESSCHARSET=IBM-1047 or LC_CTYPE=en_US
in your environment.
.IP koi8-r
Selects a Russian character set.
.IP next
Selects a character set appropriate for NeXT computers.
.IP utf-8
Selects the UTF-8 encoding of the ISO 10646 character set.
UTF-8 is special in that it supports multi-byte characters in the input file.
It is the only character set that supports multi-byte characters.
.IP windows
Selects a character set appropriate for Microsoft Windows (cp 1252).
.PP
In rare cases, it may be desired to tailor
.B less
to use a character set other than the ones definable by LESSCHARSET.
In this case, the environment variable LESSCHARDEF can be used
to define a character set.
It should be set to a string where each character in the string represents
one character in the character set.
The character ".\&" is used for a normal character, "c" for control,
and "b" for binary.
A decimal number may be used for repetition.
For example, "bccc4b.\&" would mean character 0 is binary,
1, 2 and 3 are control, 4, 5, 6 and 7 are binary, and 8 is normal.
All characters after the last are taken to be the same as the last,
so characters 9 through 255 would be normal.
(This is an example, and does not necessarily
represent any real character set.)
.PP
This table shows the value of LESSCHARDEF which is equivalent
to each of the possible values for LESSCHARSET:
.
.RS 5m
.TS
l l.
ascii	8bcccbcc18b95.b
dos	8bcccbcc12bc5b95.b.
ebcdic	5bc6bcc7bcc41b.9b7.9b5.b..8b6.10b6.b9.7b
	9.8b8.17b3.3b9.7b9.8b8.6b10.b.b.b.
IBM-1047	4cbcbc3b9cbccbccbb4c6bcc5b3cbbc4bc4bccbc
	191.b
iso8859	8bcccbcc18b95.33b.
koi8-r	8bcccbcc18b95.b128.
latin1	8bcccbcc18b95.33b.
next	8bcccbcc18b95.bb125.bb
.TE
.RE
.PP
If neither LESSCHARSET nor LESSCHARDEF is set,
but any of the strings "UTF-8", "UTF8", "utf-8" or "utf8"
is found in the LC_ALL, LC_CTYPE or LANG
environment variables, then the default character set is utf-8.
.PP
If that string is not found, but your system supports the
.B setlocale
interface,
.B less
will use setlocale to determine the character set.
setlocale is controlled by setting the LANG or LC_CTYPE environment
variables.
.PP
Finally, if the
.I setlocale
interface is also not available, the default character set is utf-8.
.PP
Control and binary characters are displayed in standout (reverse video).
Each such character is displayed in caret notation if possible
(e.g.\& \(haA for control-A).  Caret notation is used only if
inverting the 0100 bit results in a normal printable character.
Otherwise, the character is displayed as a hex number in angle brackets.
This format can be changed by
setting the LESSBINFMT environment variable.
LESSBINFMT may begin with a "*" and one character to select
the display attribute:
"*k" is blinking, "*d" is bold, "*u" is underlined, "*s" is standout,
and "*n" is normal.
If LESSBINFMT does not begin with a "*", normal attribute is assumed.
The remainder of LESSBINFMT is a string which may include one
printf-style escape sequence (a % followed by x, X, o, d, etc.).
For example, if LESSBINFMT is "*u[%x]", binary characters
are displayed in underlined hexadecimal surrounded by brackets.
The default if no LESSBINFMT is specified is "*s<%02X>".
Warning: the result of expanding the character via LESSBINFMT must
be less than 31 characters.
.PP
When the character set is utf-8, the LESSUTFBINFMT environment variable
acts similarly to LESSBINFMT but it applies to Unicode code points
that were successfully decoded but are unsuitable for display (e.g.,
unassigned code points).
Its default value is "<U+%04lX>".
Note that LESSUTFBINFMT and LESSBINFMT share their display attribute
setting ("*x") so specifying one will affect both;
LESSUTFBINFMT is read after LESSBINFMT so its setting, if any,
will have priority.
Problematic octets in a UTF-8 file (octets of a truncated sequence,
octets of a complete but non-shortest form sequence, invalid octets,
and stray trailing octets)
are displayed individually using LESSBINFMT so as to facilitate diagnostic
of how the UTF-8 file is ill-formed.
.PP
When the character set is utf-8, in rare cases it may be desirable to
override the Unicode definition of the type of certain characters.
For example, characters in a Private Use Area are normally treated as control
characters, but if you are using a custom font with printable characters
in that range, it may be desirable to tell
.B less
to treat such characters as printable.
This can be done by setting the LESSUTFCHARDEF environment variable
to a comma-separated list of 
.I "character type"
definitions.
Each character type definition consists of either one hexadecimal codepoint
or a pair of codepoints separated by a dash,
followed by a colon and a type character.
Each hexadecimal codepoint may optionally be preceded by a "U" or "U+".
If a pair of codepoints is given, the type is set for
all characters inclusively between the two values.
If there are multiple comma-separated codepoint values,
they must be in ascending numerical order.
The type character may be one of:
.RS
.IP "p"
A normal printable character.
.IP "w"
A wide (2-space) printable character.
.IP "b"
A binary (non-printable) character.
.IP "c"
A composing (zero width) character.
.RE
.PP
For example, setting LESSUTFCHARDEF to
.nf
.sp
	E000-F8FF:p,F0000-FFFFD:p,100000-10FFFD:p
.sp
.fi
would make all Private Use Area characters be treated as printable.
.SH "PROMPTS"
The \-P option allows you to tailor the prompt to your preference.
The string given to the \-P option replaces the specified prompt string.
Certain characters in the string are interpreted specially.
The prompt mechanism is rather complicated to provide flexibility,
but the ordinary user need not understand the details of constructing
personalized prompt strings.
.sp
A percent sign followed by a single character is expanded
according to what the following character is.
(References to the input file size below refer to the preprocessed size,
if an input preprocessor is being used.)
.IP "%b\fIX\fP"
Replaced by the byte offset into the current input file.
The b is followed by a single character (shown as \fIX\fP above)
which specifies the line whose byte offset is to be used.
If the character is a "t", the byte offset of the top line in the
display is used,
an "m" means use the middle line,
a "b" means use the bottom line,
a "B" means use the line just after the bottom line,
and a "j" means use the "target" line, as specified by the \-j option.
.IP "%B"
Replaced by the size of the current input file.
.IP "%c"
Replaced by the column number of the text appearing in the first
column of the screen.
.IP "%d\fIX\fP"
Replaced by the page number of a line in the input file.
The line to be used is determined by the \fIX\fP, as with the %b option.
.IP "%D"
Replaced by the number of pages in the input file,
or equivalently, the page number of the last line in the input file.
.IP "%E"
Replaced by the name of the editor (from the VISUAL environment variable,
or the EDITOR environment variable if VISUAL is not defined).
See the discussion of the LESSEDIT feature below.
.IP "%f"
Replaced by the name of the current input file.
.IP "%F"
Replaced by the last component of the name of the current input file.
.IP "%g"
Replaced by the shell-escaped name of the current input file.
This is useful when the expanded string will be used in a shell command,
such as in LESSEDIT.
.IP "%i"
Replaced by the index of the current file in the list of
input files.
.IP "%l\fIX\fP"
Replaced by the line number of a line in the input file.
The line to be used is determined by the \fIX\fP, as with the %b option.
.IP "%L"
Replaced by the line number of the last line in the input file.
.IP "%m"
Replaced by the total number of input files.
.IP "%o"
Replaced by the URI of the currently selected OSC 8 hyperlink,
or a question mark if no hyperlink is selected.
This is used by OSC 8 handlers as explained in the \(haO\(haO command description.
.IP "%p\fIX\fP"
Replaced by the percent into the current input file, based on byte offsets.
The line used is determined by the \fIX\fP as with the %b option.
.IP "%P\fIX\fP"
Replaced by the percent into the current input file, based on line numbers.
The line used is determined by the \fIX\fP as with the %b option.
.IP "%s"
Same as %B.
.IP "%t"
Causes any trailing spaces to be removed.
Usually used at the end of the string, but may appear anywhere.
.IP "%T"
Normally expands to the word "file".
However if viewing files via a tags list using the \-t option,
it expands to the word "tag".
.IP "%x"
Replaced by the name of the next input file in the list.
.PP
If any item is unknown (for example, the file size if input
is a pipe), a question mark is printed instead.
.PP
The format of the prompt string can be changed
depending on certain conditions.
A question mark followed by a single character acts like an "IF":
depending on the following character, a condition is evaluated.
If the condition is true, any characters following the question mark
and condition character, up to a period, are included in the prompt.
If the condition is false, such characters are not included.
A colon appearing between the question mark and the
period can be used to establish an "ELSE": any characters between
the colon and the period are included in the string if and only if
the IF condition is false.
Condition characters (which follow a question mark) may be:
.IP "?a"
True if any characters have been included in the prompt so far.
.IP "?b\fIX\fP"
True if the byte offset of the specified line is known.
.IP "?B"
True if the size of current input file is known.
.IP "?c"
True if the text is horizontally shifted (%c is not zero).
.IP "?d\fIX\fP"
True if the page number of the specified line is known.
.IP "?e"
True if at end-of-file.
.IP "?f"
True if there is an input filename
(that is, if input is not a pipe).
.IP "?l\fIX\fP"
True if the line number of the specified line is known.
.IP "?L"
True if the line number of the last line in the file is known.
.IP "?m"
True if there is more than one input file.
.IP "?n"
True if this is the first prompt in a new input file.
.IP "?p\fIX\fP"
True if the percent into the current input file, based on byte offsets,
of the specified line is known.
.IP "?P\fIX\fP"
True if the percent into the current input file, based on line numbers,
of the specified line is known.
.IP "?s"
Same as "?B".
.IP "?x"
True if there is a next input file
(that is, if the current input file is not the last one).
.PP
Any characters other than the special ones
(question mark, colon, period, percent, and backslash)
become literally part of the prompt.
Any of the special characters may be included in the prompt literally
by preceding it with a backslash.
.PP
Some examples:
.sp
?f%f:Standard input.
.sp
This prompt prints the filename, if known;
otherwise the string "Standard input".
.sp
?f%f \&.?ltLine %lt:?pt%pt\e%:?btByte %bt:-...
.sp
This prompt would print the filename, if known.
The filename is followed by the line number, if known,
otherwise the percent if known, otherwise the byte offset if known.
Otherwise, a dash is printed.
Notice how each question mark has a matching period,
and how the % after the %pt
is included literally by escaping it with a backslash.
.sp
?n?f%f\ .?m(%T %i of %m)\ ..?e(END)\ ?x-\ Next\e:\ %x..%t
.sp
This prints the filename if this is the first prompt in a file,
followed by the "file N of N" message if there is more
than one input file.
Then, if we are at end-of-file, the string "(END)" is printed
followed by the name of the next file, if there is one.
Finally, any trailing spaces are truncated.
This is the default prompt.
For reference, here are the defaults for
the other two prompts (\-m and \-M respectively).
Each is broken into two lines here for readability only.
.nf
.sp
?n?f%f\ .?m(%T\ %i\ of\ %m)\ ..?e(END)\ ?x-\ Next\e:\ %x.:
	?pB%pB\e%:byte\ %bB?s/%s...%t
.sp
?f%f\ .?n?m(%T\ %i\ of\ %m)\ ..?ltlines\ %lt-%lb?L/%L.\ :
	byte\ %bB?s/%s.\ .?e(END)\ ?x-\ Next\e:\ %x.:?pB%pB\e%..%t
.sp
.fi
And here is the default message produced by the = command:
.nf
.sp
?f%f\ .?m(%T\ %i\ of\ %m)\ .?ltlines\ %lt-%lb?L/%L.\ .
	byte\ %bB?s/%s.\ ?e(END)\ :?pB%pB\e%..%t
.fi
.PP
The prompt expansion features are also used for another purpose:
if an environment variable LESSEDIT is defined, it is used
as the command to be executed when the v command is invoked.
The LESSEDIT string is expanded in the same way as the prompt strings.
The default value for LESSEDIT is:
.nf
.sp
	%E\ ?lm+%lm.\ %g
.sp
.fi
Note that this expands to the editor name, followed by a + and the
line number, followed by the shell-escaped file name.
If your editor does not accept the "+linenumber" syntax, or has other
differences in invocation syntax, the LESSEDIT variable can be
changed to modify this default.
.
.SH SECURITY
When the environment variable LESSSECURE is set to 1,
.B less
runs in a "secure" mode.
In this mode, these features are disabled:
.IP "edit" 10
the edit command (v)
.IP "examine"
the examine command (:e) 
.IP "glob"
metacharacters such as * in filenames,
.br
and filename completion (TAB, \(haL)
.IP "history"
history file
.IP "lesskey"
use of lesskey files (-k and \-\-lesskey-src)
.IP "lessopen"
input preprocessor (LESSOPEN environment variable)
.IP "logfile"
log files (s and \-o)
.IP "osc8"
opening OSC 8 links (\(haO\(haO)
.IP "pipe"
the pipe command (|) 
.IP "shell"
the shell and pshell commands (! and #)
.IP "stop"
stopping
.B less
via a SIGSTOP signal
.IP "tags"
use of tags files (-t)
.PP
The LESSSECURE_ALLOW environment variable can be set to a comma-separated list
of names of features which are selectively enabled when LESSSECURE is set.
Each feature name is the first word in each line in the above list.
A feature name may be abbreviated as long as the abbreviation is unambiguous.
For example, if 
.nh
LESSSECURE=1
.hy
and
.nh
LESSSECURE_ALLOW=hist,edit
.hy
were set, all of the above features would be disabled 
except for history files and the edit command.
.PP
Less can also be compiled to be permanently in "secure" mode.
In that case, the LESSSECURE and LESSSECURE_ALLOW variables are ignored.
.
.SH "COMPATIBILITY WITH MORE"
If the environment variable LESS_IS_MORE is set to 1,
or if the program is invoked via a file link named "more"
and the environment variable LESS_IS_MORE is not set to 0,
.B less
behaves (mostly) in conformance with the POSIX 
.BR more (1)
command specification.
In this mode, less behaves differently in these ways:
.PP
The \-e option works differently.
If the \-e option is not set,
.B less
behaves as if the \-e option were set.
If the \-e option is set,
.B less
behaves as if the \-E option were set.
.PP
The \-m option works differently.
If the \-m option is not set, the medium prompt is used,
and it is prefixed with the string "\-\-More\-\-".
If the \-m option is set, the short prompt is used.
.PP
The \-n option acts like the \-z option.
The normal behavior of the \-n option is unavailable in this mode.
.PP
The parameter to the \-p option is taken to be a
.B less
command rather than a search pattern.
.PP
The LESS environment variable is ignored,
and the MORE environment variable is used in its place.
.
.SH "ENVIRONMENT VARIABLES"
Environment variables may be specified either in the system environment
as usual, or in a
.BR lesskey (1)
file.
If environment variables are defined in more than one place,
variables defined in a local lesskey file take precedence over
variables defined in the system environment, which take precedence
over variables defined in the system-wide lesskey file.
.IP COLUMNS
Sets the number of columns on the screen.
Takes precedence over the number of columns specified by the TERM variable.
(But if you have a windowing system which supports TIOCGWINSZ or WIOCGETD,
the window system's idea of the screen size takes precedence over the
LINES and COLUMNS environment variables.)
.IP EDITOR
The name of the editor (used for the v command).
.IP HOME
Name of the user's home directory
(used to find a lesskey file on Unix and OS/2 systems).
.IP "HOMEDRIVE, HOMEPATH"
Concatenation of the HOMEDRIVE and HOMEPATH environment variables is
the name of the user's home directory if the HOME variable is not set
(only in the Windows version).
.IP INIT
Name of the user's init directory (used to find a lesskey file on OS/2 systems).
.IP LANG
Language for determining the character set.
.IP LC_CTYPE
Language for determining the character set.
.IP LESS
Options which are passed to
.B less
automatically.
.IP LESSANSIENDCHARS
Characters which may end an ANSI color escape sequence
(default "m").
.IP LESSANSIMIDCHARS
Characters which may appear between the ESC character and the
end character in an ANSI color escape sequence
(default "0123456789:;[?!"\(aq#%()*+\ ").
.IP LESSANSIOSCALLOW
A comma-separated list of OSC types which are output directly to the
terminal when \-R is in effect.
By default, only OSC 8 sequences are output directly.
.IP LESSANSIOSCCHARS
Characters which may follow an ESC character to mark the start
of an "OS Command" sequence. 
All characters that follow this character up to a 
String Terminator (ESC-backslash or BEL)
are considered to be part of the OSC sequence 
(default "]").
If a character in LESSANSIOSCCHARS is followed by an asterisk,
sequences that begin with that character in the file contents 
are passed through to the terminal;
otherwise only sequences that appear in a prompt string are passed through.
.IP LESSBINFMT
Format for displaying non-printable, non-control characters.
.IP LESSCHARDEF
Defines a character set.
.IP LESSCHARSET
Selects a predefined character set.
.IP LESSCLOSE
Command line to invoke the (optional) input-postprocessor.
.IP LESSECHO
Name of the lessecho program (default "lessecho").
The lessecho program is needed to expand metacharacters, such as * and ?,
in filenames on Unix systems.
.IP LESSEDIT
Editor prototype string (used for the v command).
See discussion under PROMPTS.
.IP LESSGLOBALTAGS
Name of the command used by the \-t option to find global tags.
Normally should be set to "global" if your system has the
.BR global (1)
command.  If not set, global tags are not used.
.IP LESSHISTFILE
Name of the history file used to remember search commands and
shell commands between invocations of
.BR less .
If set to "\-" or "/dev/null", a history file is not used.
The default depends on the operating system, but is usually:
.RS
.IP "Linux and Unix"
"$XDG_STATE_HOME/lesshst" or "$HOME/.local/state/lesshst" or
"$XDG_DATA_HOME/lesshst" or "$HOME/.lesshst".
.IP "Windows and MS-DOS"
"$HOME/_lesshst".
.IP "OS/2"
"$HOME/lesshst.ini" or "$INIT/lesshst.ini".
.RE
.IP LESSHISTSIZE
The maximum number of commands to save in the history file.
The default is 100.
.IP LESSKEYIN
Name of the default
.I "lesskey source"
file.
.IP LESSKEY
Name of the default
.I "lesskey binary"
file. (Not used if "$LESSKEYIN" exists.)
.IP LESSKEY_CONTENT
The value is parsed as if it were the parameter of a \-\-lesskey-content option.
.IP LESSKEYIN_SYSTEM
Name of the default system-wide
.I "lesskey source"
file.
.IP LESSKEY_SYSTEM
Name of the default system-wide
.I "lesskey binary"
file. (Not used if "$LESSKEYIN_SYSTEM" exists.)
.IP LESSMETACHARS
List of characters which are considered "metacharacters" by the shell.
.IP LESSMETAESCAPE
Prefix which less will add before each metacharacter in a
command sent to the shell.
If LESSMETAESCAPE is an empty string, commands containing
metacharacters will not be passed to the shell.
.IP LESSOPEN
Command line to invoke the (optional) input-preprocessor.
.IP LESSSECURE
Runs less in "secure" mode.
See discussion under SECURITY.
.IP LESSSECURE_ALLOW
Enables individual features which are normally disabled by LESSSECURE.
See discussion under SECURITY.
.IP LESSSEPARATOR
String to be appended to a directory name in filename completion.
.IP LESSUTFBINFMT
Format for displaying non-printable Unicode code points.
.IP LESSUTFCHARDEF 
Overrides the type of specified Unicode characters.
.IP LESS_COLUMNS
Sets the number of columns on the screen.
Unlike COLUMNS, takes precedence over the system's idea of the screen size,
so it can be used to make
.B less
use less than the full screen width.
If set to a negative number, sets the number of columns used to
this much less than the actual screen width.
.IP LESS_LINES
Sets the number of lines on the screen.
Unlike LINES, takes precedence over the system's idea of the screen size,
so it can be used to make
.B less
use less than the full screen height.
If set to a negative number, sets the number of lines used to
this much less than the actual screen height.
When set,
.B less
repaints the entire screen on every movement command,
so scrolling may be slower.
.IP LESS_DATA_DELAY
Duration (in milliseconds) after starting to read data from the input,
after which the "Waiting for data" message will be displayed.
The default is 4000 (4 seconds).
.IP LESS_IS_MORE
Emulate the
.BR more (1)
command.
.IP LESS_OSC8_xxx
Where "xxx" is a URI scheme such as "http" or "file",
sets an OSC 8 handler for opening OSC 8 links containing a URI with that scheme.
.IP LESS_OSC8_ANY
Sets an OSC 8 handler for opening OSC 8 links for which there is 
no specific LESS_OSC8_xxx handler set for the "xxx" scheme.
.IP LESS_SHELL_LINES
When the \-F option is set,
.B less
exits automatically if the number of screen lines used to display the file 
is less than or equal to the screen height minus the value of 
the LESS_SHELL_LINES variable.
Thus, if you use a shell prompt which occupies more than one screen line,
this variable can be set to the number of lines used by your prompt,
to ensure that the entire file can be seen when \-F is used.
If not set, LESS_SHELL_LINES is assumed to be 1.
.IP LESS_SIGUSR1
If set to a string of one or more
.B less
command characters, those commands will be executed when
.B less
receives a SIGUSR1 signal.
.B less
receives a SIGUSR2 signal.
.IP LESS_TERMCAP_xx
Where "xx" is any two characters, overrides the definition 
of the termcap "xx" capability for the terminal.
.IP LESS_UNSUPPORT
A space-separated list of command line options.
These options will be ignored (with no error message) if they appear 
on the command line or in the LESS environment variable.
Options listed in LESS_UNSUPPORT can still be changed by the \- and \-\- commands.
Each option in LESS_UNSUPPORT is a dash followed by a single character 
option letter, or two dashes followed by a long option name.
.IP LINES
Sets the number of lines on the screen.
Takes precedence over the number of lines specified by the TERM variable.
(But if you have a windowing system which supports TIOCGWINSZ or WIOCGETD,
the window system's idea of the screen size takes precedence over the
LINES and COLUMNS environment variables.)
.IP MORE
Options which are passed to
.B less
automatically when running in
.BR more "-compatible mode."
.IP PATH
User's search path (used to find a lesskey file
on MS-DOS, Windows, and OS/2 systems).
.IP SHELL
The shell used to execute the !\& command, as well as to expand filenames.
.IP TERM
The type of terminal on which
.B less
is being run.
.IP VISUAL
The name of the editor (used for the v command).
.IP XDG_CONFIG_HOME
Possible location of the 
.B lesskey
file; see the KEY BINDINGS section.
.IP XDG_DATA_HOME
Possible location of the history file; see the description of the LESSHISTFILE environment variable.
.IP XDG_STATE_HOME
Possible location of the history file; see the description of the LESSHISTFILE environment variable.
.
.SH "SEE ALSO"
.BR lesskey (1),
.BR lessecho (1)
.
.SH COPYRIGHT
Copyright (C) 1984-2025  Mark Nudelman
.PP
less is part of the GNU project and is free software.
You can redistribute it and/or modify it
under the terms of either
(1) the GNU General Public License as published by
the Free Software Foundation; or (2) the Less License.
See the file README in the less distribution for more details
regarding redistribution.
You should have received a copy of the GNU General Public License
along with the source for less; see the file COPYING.
If not, write to the Free Software Foundation, 59 Temple Place,
Suite 330, Boston, MA  02111-1307, USA.
You should also have received a copy of the Less License;
see the file LICENSE.
.PP
less is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
.
.SH AUTHOR
.
Mark Nudelman
.br
Report bugs at 
.UR https://github.com/gwsw/less/issues
.UE .
.br
For more information, see the less homepage at
.br
.UR https://greenwoodsoftware.com/less
.UE .