laser-cut-tomkeddie

Icebreaker FPGA Board Case

Introduction

This is a simple laser cut baseplate for the Icebreaker FPGA board version 1.0c as sold here: https://www.crowdsupply.com/1bitsquared/icebreaker-fpga .

Assumptions

This case was made for an icebreaker board with the PMOD part in place or removed.

Tools and parts needed

• Lasercutter
• Acrylic sheet, any thickness (3mm or 1/8" works well)
• 4/6 M3 nuts
• 4/6 M3 standoffs (5mm long pref)
• 4/6 M3 bolts (12mm works well but will need longer if the acyrlic is thicker or standoffs longer)