| layout | title | permalink |
|---|---|---|
page |
Q90511: What Is a Clean Boot for Windows for Workgroups? |
/kb/090/Q90511/ |
{% raw %}
Article: Q90511
Product(s): Microsoft Windows 3.x Retail Product
Version(s): WINDOWS:
Operating System(s):
Keyword(s):
Last Modified: 17-SEP-1999
3.10 3.11
WINDOWS
kbusage kbdisplay kbtshoot
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows for Workgroups
-------------------------------------------------------------------------------
SUMMARY
=======
A "clean boot" (starting your computer after all unnecessary commands have been
removed from your CONFIG.SYS and AUTOEXEC.BAT files) is used as a basic
troubleshooting step to test possible conflicts between Windows for Workgroups
and various terminate-and-stay-resident (TSR) programs and device drivers. There
are different types of clean boots; the correct one to use depends on whether or
not Windows for Workgroups has been installed.
For more information on clean booting, see Chapter 6 of the "Getting Started with
Microsoft Windows for Workgroups" version 3.1 manual and Chapter 11 of the
version 3.1 "Microsoft Windows for Workgroups Users Guide."
NOTE: This article explains how to clean boot your system up to the point when
you start Windows. To start Windows without loading any third-party programs,
you must clear the StartUp group, clear the LOAD= and RUN= entries in the
WIN.INI file, and ensure the SHELL= entry in the SYSTEM.INI file is loading
PROGMAN.EXE. Also, make sure the SYSTEM.INI file does not include third-party
virtual device drivers (VxDs) or other third-party Windows components.
MORE INFORMATION
================
Before Clean Booting
--------------------
Create a bootable floppy disk that contains the MS-DOS system files and any other
files that are required to make the system operational, such as disk-
compression utilities (for example, Stacker), disk partitioning drivers (for
example, Disk Manager), and other third-party device drivers.
To Clean Boot Before Running Windows Setup
------------------------------------------
If there is no disk compression software, disk partitioning software, or other
third-party drivers necessary to start the computer, the machine can be started
from a floppy disk that contains only the MS-DOS system files, without a
CONFIG.SYS or AUTOEXEC.BAT file.
If there is disk partitioning, disk compression, or other third-party software
required to boot the computer, the startup files on the disk created above
should appear as follows:
CONFIG.SYS AUTOEXEC.BAT
---------- ------------
FILES=45 PROMPT $P$G
BUFFERS=20
<Third-party disk partitioner>
<Third-party disk compression driver>
<Other required third-party driver>
Windows for Workgroups 3.1 Clean Boot
-------------------------------------
AFTER Windows for Workgroups version 3.1 is installed, a clean boot should appear
as follows:
CONFIG.SYS AUTOEXEC.BAT
---------- ------------
FILES=45 <WFWG 3.1 dir>NET START
BUFFERS=20 PROMPT $P$G
DEVICE=C:\<WFWG 3.1 dir>\HIMEM.SYS PATH C:\Windows;C:\DOS;C:\
<Third-party disk partitioner> SET TEMP=C:\<valid path>
<Third-party disk compression driver>
<Other required third-party drivers>
DEVICE=<valid path>\PROTMAN.DOS /I:<valid PATH to PROTOCOL.INI>
DEVICE=<MAC DRIVER>.DOS
DEVICE=<valid path>WORKGRP.SYS
SHELL=C:\<valid path>\COMMAND.COM /E:1024 /P
STACKS=9,256
Windows for Workgroups 3.11 Clean Boot
--------------------------------------
AFTER Windows for Workgroups version 3.11 is installed, a clean boot should
appear as follows:
CONFIG.SYS AUTOEXEC.BAT
---------- ------------
FILES=45 <WFWG 3.11 dir>NET START
BUFFERS=20 PROMPT $P$G
DEVICE=C:\<WFWG 3.11 dir>\HIMEM.SYS PATH=C:\Windows;C:\DOS;C:\
<Third-party disk partitioner> SET TEMP=C:\<valid path>
<Third-party disk compression driver>
<Other required third-party drivers>
DEVICE=<WFW 3.11 dir>IFSHLP.SYS
SHELL=C:\<valid path>\COMMAND.COM /E:1024 /P
STACKS=9,256
Exceptions
----------
The following are examples of drivers that SHOULD NOT be removed; they are used
when the computer is turned on to make the hard drive accessible. This is not a
complete list, but it does include most of the commonly used drivers:
Hard Disk Drivers: SQY55.SYS, SSTBIO.SYS, SSTDRIVE.SYS,
AH1544.SYS, ILIM386.SYS, ASPI4DOS.SYS,
SCSIHA.SYS, SCSIDSK.EXE, SKYDRVI.SYS,
ATDOSXL.SYS, NONSTD.SYS.
Disk Partitioners: DMDRVR.BIN, SSTOR.SYS, HARDRIVE.SYS,
EDVR.SYS, FIXT_DRV.SYS, LDRIVE.SYS,
ENHDISK.SYS.
Disk Compression Utilities: STACKER.COM, SSWAP.COM, SSTOR.EXE,
DEVSWAP.COM
If the purpose of a device driver or program is unknown, DO NOT remove it. Most
device drivers and programs will display a message describing their purpose when
they are initialized.
A clean boot DOES NOT include:
- DOS=HIGH,UMB
- EMM386.EXE
- INSTALL=SHARE.EXE
- INSTALL=FASTOPEN.EXE
- Third-party memory managers
- RAM disk devices
- JOIN, GRAPHICS, PRINT, SUBST, APPEND
- MODE for printer redirection
- Multiple path statements
- MS-DOS-level mouse drivers
- Third-party disk caches
- Various third-party TSRs
- LOGIMENU, CLICK
- Virus checkers
- Drivers for scanners/fax
- Drivers for CD ROM/network
- Tape backup spoolers/redirectors/buffers
- Data acquisition units
- Keyboard accelerators/buffers
For information on clean booting Windows 3.0, query on the following words in the
Microsoft Knowledge Base:
clean and boot and windows and 3.0
Additional query words: 1.0 1.00 3.10 3.11 LAN Manager LANman clean- boot PRINT.COM RAMDRIVE.SYS JOIN.EXE PRINT.EXE MODE.COM GRAPHICS.COM SUBST.EXE cleanboot tshoot
======================================================================
Keywords :
Technology : kbAudDeveloper kbWFWSearch
Version : WINDOWS:
=============================================================================
{% endraw %}