Questions about new config in V24.1

[Christoph1111]

I updated to the new version with new configpath and was wondering about tons of (unimportant) polled messages.
Raspberry: /etc/default/ebusd:
EBUSD_OPTS=" --scanconfig -d /dev/serial/by-id/usb-ESERA-Automation_eBus_Coupler_12001_AL4CEGVA-if00-port0 --accesslevel=* --pollinterval=5 -l /var/log/ebusd.log --configpath=https://ebus.github.io/ --configlang=DE etc...

ebusctl info gives:

address 03: master #11
address 08: slave #11, scanned "MF=Vaillant;ID=BAI00;SW=0311;HW=9602", loaded "vaillant/bai.0010015600.inc" ([id_hw=9602]), "vaillant/08.bai.csv"
address 10: master #2
address 15: slave #2, scanned "MF=Vaillant;ID=70000;SW=0613;HW=6903", loaded "vaillant/15.700.csv"

which is correct and works since years, but where are these csv files?

READING
ebusctl find -f -c 700 gives lots of rows and anyone starts with r1,.... so no wonder.

Looking into (https://ebus.github.io/) and from there into (https://github.com/john30/ebusd-configuration/tree/master/src)
the 15.700.tsp says e.g.:

/** continuos heating */
  @inherit(r_1, w_1)
  @ext(0x2, 0)
  model ContinuosHeating {
    /** -26=off, when the outside temperature falls below this threshold temperature the continuous heating function is started (off <=> function is disabled) */
    value: tempv;
  }

I guess r_1 means PRIO 1, is that correct?
But what does @inherit(r_12, w_12) mean? The bai - file has no underlined numbers only r and I cannot find any description how to read/write the configuration and change the behaviour of the ebusd.

WRITING
Is that the correct way to clone the repo into ~/ebusd-configuration/ebusd-configuration.git and then edit the appropriate type-script files? Or do I have to work with converted csv-files the old way?

Any help is appreciated...
Regards
Chris

[citoki]

@Christoph1111 see some documentation here: https://github.com/john30/ebusd-configuration/blob/master/guidelines.md
Starting from 24.1, the CSV files will be generated via the TypeSpec tools with the .tsp files.