iso2usb.sh

#!/bin/bash
#
# Copyright 2015, 2016, 2017  Eric Hameleers, Eindhoven, NL
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# Be careful:
set -e

# Set to '1' if you want to ignore all warnings:
FORCE=0

# By default, we use 'slhome.img' as the name of the LUKS home containerfile.
DEF_SLHOME="slhome"
SLHOME="${DEF_SLHOME}"

# By default, we use 'persistence' as the name of the persistence directory,
# or 'persistence.img' as the name of the persistence container:
DEF_PERSISTENCE="persistence"
PERSISTENCE="${DEF_PERSISTENCE}"

# Default persistence type is a directory:
PERSISTTYPE="dir"

# Set to '1' if the script should not ask any questions:
UNATTENDED=0

# By default do not show file operations in detail:
VERBOSE=0

# Limit the search path:
export PATH="/usr/sbin:/sbin:/usr/bin:/bin"

# Variables to store content from an initrd we are going to refresh:
OLDPERSISTENCE=""
OLDWAIT=""
OLDLUKS=""
OLDVERSION=""

# Version information stored in the ISO file:
VERSION=""

# Seconds to add to the initrd as wait-for-root value:
WAIT=5

# No LUKS encryption by default:
DOLUKS=0

# We are NOT refreshing existing Live content by default:
REFRESH=0

# These tools are required by the script, we will check for their existence:
REQTOOLS="blkid cpio extlinux fdisk gdisk isoinfo mkdosfs sgdisk"

# Initialize more variables:
CNTBASE=""
CNTDEV=""
CNTFILE=""
HLUKSSIZE=""
LUKSHOME=""
LODEV=""

# Define ahead of time, so that cleanup knows about them:
IMGDIR=""
ISOMNT=""
CNTMNT=""
USBMNT=""
US2MNT=""

# Compressor used on the initrd ("gzip" or "xz --check=crc32");
# Note that the kernel's XZ decompressor does not understand CRC64:
COMPR="xz --check=crc32"

#
#  -- function definitions --
#

# Clean up in case of failure:
cleanup() {
  # Clean up by unmounting our loopmounts, deleting tempfiles:
  echo "--- Cleaning up the staging area..."
  # During cleanup, do not abort due to non-zero exit code:
  set +e
  sync
  if [ $DOLUKS -eq 1 -a -n "$CNTDEV" ]; then
    # In case of failure, only the most recent device should still be open:
    if mount |grep -q ${CNTDEV} ; then
      umount -f ${CNTDEV}
      cryptsetup luksClose $(basename ${CNTBASE})
      losetup -d ${LODEV}
    fi
  fi
  [ -n "${ISOMNT}" ] && ( umount -f ${ISOMNT} 2>/dev/null; rmdir $ISOMNT )
  [ -n "${CNTMNT}" ] && ( umount -f ${CNTMNT} 2>/dev/null; rmdir $CNTMNT )
  [ -n "${USBMNT}" ] && ( umount -f ${USBMNT} 2>/dev/null; rmdir $USBMNT )
  [ -n "${US2MNT}" ] && ( umount -f ${US2MNT} 2>/dev/null; rmdir $US2MNT )
  [ -n "${IMGDIR}" ] && ( rm -rf $IMGDIR )
  set -e
}
trap 'echo "*** $0 FAILED at line $LINENO ***"; cleanup; exit 1' ERR INT TERM

showhelp() {
cat <<EOT
#
# Purpose: to transfer the content of Slackware's Live ISO image
#   to a standard USB thumb drive (which will be formatted and wiped!)
#   and thus create a Slackware Live USB media. 
#
# Your USB thumb drive may contain data!
# This data will be *erased* !
#
# $(basename $0) accepts the following parameters:
#   -c|--crypt size|perc       Add LUKS encrypted /home ; parameter is the
#                              requested size of the container in kB, MB, GB,
#                              or as a percentage of free space.
#                              Examples: '-c 125M', '-c 1.3G', '-c 20%'.
#   -f|--force                 Ignore most warnings (except the back-out).
#   -h|--help                  This help.
#   -i|--infile <filename>     Full path to the ISO image file.
#   -l|--lukshome <name>       Custom path to the containerfile for your LUKS
#                              encrypted /home ($SLHOME by default).
#   -o|--outdev <filename>     The device name of your USB drive.
#   -p|--persistence <name>    Custom path to the 'persistence' directory
#                              or containerfile ($PERSISTENCE by default).
#   -r|--refresh               Refresh the USB stick with the ISO content.
#                              No formatting, do not touch user content.
#   -u|--unattended            Do not ask any questions.
#   -v|--verbose               Show verbose messages.
#   -w|--wait<number>          Add <number> seconds wait time to initialize USB.
#   -C|--cryptpersistfile size|perc
#                              Use a LUKS-encrypted 'persistence' file instead
#                              of a directory (for use on FAT filesystem).
#   -P|--persistfile           Use a 'persistence' container file instead of
#                              a directory (for use on FAT filesystem).
#
# Examples:
#
# $(basename $0) -i ~/download/slackware64-live-14.2.iso -o /dev/sdX
# $(basename $0) -i slackware64-live-xfce-current.iso -o /dev/sdX -c 750M -w 15
#
EOT
}

# Uncompress the initrd based on the compression algorithm used:
uncompressfs () {
  if $(file "${1}" | grep -qi ": gzip"); then
    gzip -cd "${1}"
  elif $(file "${1}" | grep -qi ": XZ"); then
    xz -cd "${1}"
  fi
}

# Read configuration data from old initrd:
read_initrd() {
  IMGFILE="$1"

  OLDPERSISTENCE=$(uncompressfs ${IMGFILE} |cpio -i --to-stdout init |grep "^PERSISTENCE" |cut -d '"' -f2 2>/dev/null)
  OLDWAIT=$(uncompressfs ${IMGFILE} |cpio -i --to-stdout wait-for-root 2>/dev/null)
  OLDLUKS=$(uncompressfs ${IMGFILE} |cpio -i --to-stdout luksdev 2>/dev/null)
}

# Add longer USB WAIT to the initrd:
update_initrd() {
  IMGFILE="$1"

  # USB boot medium needs a few seconds boot delay else the overlay will fail.
  # Check if we need to update the wait-for-root file in the initrd:
  if [ "$OLDWAIT" = "$WAIT" -a $DOLUKS -eq 0 -a $REFRESH -eq 0 ]; then
    return
  fi
  
  if [ -z "$IMGDIR" ]; then
    # Create a temporary extraction directory for the initrd:
    mkdir -p /mnt
    IMGDIR=$(mktemp -d -p /mnt -t alienimg.XXXXXX)
    if [ ! -d $IMGDIR ]; then
      echo "*** Failed to create a temporary extraction directory for the initrd!"
      exit 1
    fi
  fi
  chmod 711 $IMGDIR

  echo "--- Extracting Slackware initrd and adding rootdelay for USB..."
  cd ${IMGDIR}
    uncompressfs ${IMGFILE} \
      | cpio -i -d -H newc --no-absolute-filenames
    
    if [ $REFRESH -eq 1 ]; then
      echo "--- Refreshing Slackware initrd..."
      WAIT="$OLDWAIT"
      if [ -n "$OLDLUKS" ]; then
        echo "--- Detected LUKS container configuration:"
        echo "$OLDLUKS" | sed 's/^/    /'
      fi
      echo "$OLDLUKS" >> luksdev
      if [ "${PERSISTENCE}" != "${DEF_PERSISTENCE}" ]; then
        # If the user specified a nonstandard persistence, use that:
        echo "--- Updating persistence from '$OLDPERSISTENCE' to '$PERSISTENCE'"
        sed -i -e "s,^PERSISTENCE=.*,PERSISTENCE=\"${PERSISTENCE}\"," init
      elif [ "${PERSISTENCE}" != "${OLDPERSISTENCE}" ]; then
        # The user did not specify persistence, re-use the retrieved value:
        sed -i -e "s,^PERSISTENCE=.*,PERSISTENCE=\"${OLDPERSISTENCE}\"," init
        echo "--- Re-use previous '$OLDPERSISTENCE' for persistence"
        PERSISTENCE="${OLDPERSISTENCE}"
      fi
    else
      if [ "${PERSISTENCE}" != "${DEF_PERSISTENCE}" ]; then
        # If the user specified a nonstandard persistence, use that:
        echo "--- Updating persistence from '$DEF_PERSISTENCE' to '$PERSISTENCE'"
        sed -i -e "s,^PERSISTENCE=.*,PERSISTENCE=\"${PERSISTENCE}\"," init
      fi
    fi

    echo "--- Updating 'waitforroot' time from '$OLDWAIT' to '$WAIT'"
    echo ${WAIT} > wait-for-root

    if [ $DOLUKS -eq 1 -a -n "${LUKSHOME}" ]; then
      if ! grep -q ${LUKSHOME} luksdev ; then
        echo "--- Adding '${LUKSHOME}' as LUKS /home:"
        echo "${LUKSHOME}" >> luksdev
      fi
    fi

    echo "--- Compressing the initrd image again:"
    chmod 0755 ${IMGDIR}
    find . |cpio -o -H newc |$COMPR > ${IMGFILE}
  cd - 1>/dev/null
  rm -rf $IMGDIR/*
} # End of update_initrd()

# Create a container file in the empty space of the partition
create_container() {
  CNTPART=$1
  CNTSIZE=$2
  CNTBASE=$3
  CNTENCR=$4 # 'none' or 'luks'
  CNTUSED=$5 # '/home' or 'persistence'

  # Create a container file or re-use previously created one:
  if [ -f $USBMNT/${CNTBASE}.img ]; then
    CNTFILE="${CNTBASE}.img"
    CNTSIZE=$(( $(du -sk $USBMNT/${CNTFILE} |tr '\t' ' ' |cut -f1 -d' ') / 1024 ))
    echo "--- Keeping existing '${CNTFILE}' (size ${CNTSIZE} MB)."
    return
  fi

  # Determine size of the target partition (in MB), and the free space:
  PARTSIZE=$(df -P -BM ${CNTPART} |tail -1 |tr -s '\t' ' ' |cut -d' ' -f2)
  PARTSIZE=${PARTSIZE%M}
  PARTFREE=$(df -P -BM ${CNTPART} |tail -1 |tr -s '\t' ' ' |cut -d' ' -f4)
  PARTFREE=${PARTFREE%M}

  if [ $PARTFREE -lt 10 ]; then
    echo "*** Free space on USB partition is less than 10 MB;"
    echo "*** Not creating a container file!"
    exit 1
  fi

  # Determine requested container size (allow for '%|k|K|m|M|g|G' suffix):
  case "${CNTSIZE: -1}" in
     "%") CNTSIZE="$(( $PARTFREE * ${CNTSIZE%\%} / 100 ))" ;;
     "k") CNTSIZE="$(( ${CNTSIZE%k} / 1024 ))" ;;
     "K") CNTSIZE="$(( ${CNTSIZE%K} / 1024 ))" ;;
     "m") CNTSIZE="${CNTSIZE%m}" ;;
     "M") CNTSIZE="${CNTSIZE%M}" ;;
     "g") CNTSIZE="$(( ${CNTSIZE%g} * 1024 ))" ;;
     "G") CNTSIZE="$(( ${CNTSIZE%G} * 1024 ))" ;;
       *) ;;
  esac

  if [ $CNTSIZE -le 0 ]; then
    echo "*** Container size must be larger than ZERO!"
    echo "*** Check your '-c' commandline parameter."
    exit 1
  elif [ $CNTSIZE -ge $PARTFREE ]; then
    echo "*** Not enough free space for container file!"
    echo "*** Check your '-c' commandline parameter."
    exit 1
  fi

  echo "--- Creating ${CNTSIZE} MB container file using 'dd if=/dev/urandom', patience please..."
  mkdir -p $USBMNT/$(dirname "${CNTBASE}")
  CNTFILE="${CNTBASE}.img"
  # Create a sparse file (not allocating any space yet):
  dd of=$USBMNT/${CNTFILE} bs=1M count=0 seek=$CNTSIZE

  # Setup a loopback device that we can use with cryptsetup:
  LODEV=$(losetup -f)
  losetup $LODEV $USBMNT/${CNTFILE}
  if [ "${CNTENCR}" = "luks" ]; then
    # Format the loop device with LUKS:
    echo "--- Encrypting the container file with LUKS; enter 'YES' and a passphrase..."
    until cryptsetup -y luksFormat $LODEV ; do
      echo ">>> Did you type two different passphrases?"
      read -p ">>> Press [ENTER] to try again or Ctrl-C to abort ..." REPLY 
    done
    # Unlock the LUKS encrypted container:
    echo "--- Unlocking the LUKS container requires your passphrase again..."
    until cryptsetup luksOpen $LODEV $(basename ${CNTBASE}) ; do
      echo ">>> Did you type an incorrect passphrases?"
      read -p ">>> Press [ENTER] to try again or Ctrl-C to abort ..." REPLY 
    done
    CNTDEV=/dev/mapper/$(basename ${CNTBASE})
    # Now we allocate blocks for the LUKS device. We write encrypted zeroes,
    # so that the file looks randomly filled from the outside.
    # Take care not to write more bytes than the internal size of the container:
    CNTIS=$(( $(lsblk -b -n -o SIZE  $(readlink -f ${CNTDEV})) / 512))
    dd if=/dev/zero of=${CNTDEV} bs=512 count=${CNTIS} || true
  else
    CNTDEV=$LODEV
    # Un-encrypted container files remain sparse.
  fi

  # Format the now available block device with a linux fs:
  mkfs.ext4 ${CNTDEV}
  # Tune the ext4 filesystem:
  tune2fs -m 0 -c 0 -i 0 ${CNTDEV}

  if [ "${CNTUSED}" != "persistence" ]; then
    # Create a mount point for the unlocked container:
    CNTMNT=$(mktemp -d -p /mnt -t aliencnt.XXXXXX)
    if [ ! -d $CNTMNT ]; then
      echo "*** Failed to create temporary mount point for the LUKS container!"
      cleanup
      exit 1
    else
      chmod 711 $CNTMNT
    fi
    # Copy the original /home (or whatever mount) content into the container:
    echo "--- Copying '${CNTUSED}' from LiveOS to container..."
    HOMESRC=$(find ${USBMNT} -name "0099-slackware_zzzconf*" |tail -1)
    mount ${CNTDEV} ${CNTMNT}
    unsquashfs -n -d ${CNTMNT}/temp ${HOMESRC} ${CNTUSED}
    mv ${CNTMNT}/temp/${CNTUSED}/* ${CNTMNT}/
    rm -rf ${CNTMNT}/temp
    umount ${CNTDEV}
  fi

  # Don't forget to clean up after ourselves:
  if [ "${CNTENCR}" = "luks" ]; then
    cryptsetup luksClose $(basename ${CNTBASE})
  fi
  losetup -d ${LODEV} || true

} # End of create_container() {

#
#  -- end of function definitions --
#

# Parse the commandline parameters:
if [ -z "$1" ]; then
  showhelp
  exit 1
fi
while [ ! -z "$1" ]; do
  case $1 in
    -c|--crypt)
      HLUKSSIZE="$2"
      DOLUKS=1
      # Needs unsquashfs to extract the /home
      REQTOOLS="${REQTOOLS} unsquashfs"
      shift 2
      ;;
    -f|--force)
      FORCE=1
      shift
      ;;
    -h|--help)
      showhelp
      exit
      ;;
    -i|--infile)
      SLISO="$(cd $(dirname $2); pwd)/$(basename $2)"
      shift 2
      ;;
    -l|--lukshome)
      SLHOME="$2"
      shift 2
      ;;
    -o|--outdev)
      TARGET="$2"
      shift 2
      ;;
    -p|--persistence)
      PERSISTENCE="$2"
      shift 2
      ;;
    -r|--refresh)
      REFRESH=1
      shift
      ;;
    -u|--unattended)
      UNATTENDED=1
      shift
      ;;
    -v|--verbose)
      VERBOSE=1
      shift
      ;;
    -w|--wait)
      WAIT="$2"
      shift 2
      ;;
    -C|--cryptpersistfile)
      DOLUKS=1
      PLUKSSIZE="$2"
      PERSISTTYPE="file"
      shift 2
      ;;
    -P|--persistfile)
      PERSISTTYPE="file"
      shift
      ;;
    *)
      echo "*** Unknown parameter '$1'!"
      exit 1
      ;;
  esac
done

# Before we start:
if [ "$(id -u)" != "0" -a $FORCE -eq 0 ]; then
  echo "*** You need to be root to run $(basename $0)."
  exit 1
fi

# More sanity checks:
if [ -z "$TARGET" -o -z "$SLISO" ]; then
  echo "*** You must specify both the Live ISO filename and the USB devicename!"
  exit 1
fi

if [ $FORCE -eq 0 -a ! -f $SLISO ]; then
  echo "*** This is not a useable file: '$SLISO' !"
  exit 1
fi

if [ ! -b $TARGET -a $FORCE -eq 0 ]; then
  echo "*** Not a block device: '$TARGET' !"
  exit 1
elif [ "$(echo ${TARGET%[0-9]})" != "$TARGET" -a $FORCE -eq 0 ]; then
  echo "*** You need to point to the USB device, not a partition ($TARGET)!"
  exit 1
fi

# Are all the required not-so-common add-on tools present?
PROG_MISSING=""
for PROGN in ${REQTOOLS} ; do
  if ! which $PROGN 1>/dev/null 2>/dev/null ; then
    PROG_MISSING="${PROG_MISSING}--   $PROGN\n"
  fi
done
if [ ! -z "$PROG_MISSING" ] ; then
  echo "-- Required program(s) not found in search path '$PATH'!"
  echo -e ${PROG_MISSING}
  echo "-- Exiting."
  exit 1
fi

# Retrieve the version information from the ISO:
VERSION=$(isoinfo -d -i ${SLISO} 2>/dev/null |grep Application |cut -d: -f2-)

if [ $REFRESH -eq 0 ]; then
  # We are creating a USB stick from scratch,
  # i.e. not refreshing the Live content.
  # Confirm wipe:
  cat <<EOT
#
# We are going to format this device (erase all data) - '$TARGET':
EOT
else
  # We are refreshing the Live content.
  # Confirm refresh:
  cat <<EOT
#
# We are going to refresh the Live OS on this device with '$VERSION'.
# Target is - '$TARGET':
EOT
fi
  # Continue with the common text message:
  cat <<EOT
# Vendor : $(cat /sys/block/$(basename $TARGET)/device/vendor)
# Model  : $(cat /sys/block/$(basename $TARGET)/device/model)
# Size   : $(( $(cat /sys/block/$(basename $TARGET)/size) / 2048)) MB
#
# FDISK OUTPUT:
EOT

  echo q |gdisk -l $TARGET 2>/dev/null | \
    while read LINE ; do echo "# $LINE" ; done

  if [ $UNATTENDED -eq 0 ]; then
    cat <<EOT

***                                                       ***
*** If this is the wrong drive, then press CONTROL-C now! ***
***                                                       ***

EOT
    read -p "Or press ENTER to continue: " JUNK
    # OK... the user was sure about the drive...
  fi

if [ $REFRESH -eq 0 ]; then
  # Continue with the wipe/partitioning/formatting.

  # Get the LABEL used for the ISO:
  LIVELABEL=$(blkid -s LABEL -o value ${SLISO})

  # Use sgdisk to wipe and then setup the USB device:
  # - 1 MB BIOS boot partition
  # - 100 MB EFI system partition
  # - Let Slackware have the rest
  # - Make the Linux partition "legacy BIOS bootable"
  # Make sure that there is no MBR nor a partition table anymore:
  dd if=/dev/zero of=$TARGET bs=512 count=1 conv=notrunc
  # The first sgdisk command is allowed to have non-zero exit code:
  sgdisk -og $TARGET || true
  sgdisk \
    -n 1:2048:4095 -c 1:"BIOS Boot Partition" -t 1:ef02 \
    -n 2:4096:208895 -c 2:"EFI System Partition" -t 2:ef00 \
    -n 3:208896:0 -c 3:"Slackware Linux" -t 3:8300 \
    $TARGET
  sgdisk -A 3:set:2 $TARGET
  # Show what we did to the USB stick:
  sgdisk -p -A 3:show $TARGET

  # Create filesystems:
  # Not enough clusters for a 32 bit FAT:
  mkdosfs -s 2 -n "DOS" ${TARGET}1
  mkdosfs -F32 -s 2 -n "EFI" ${TARGET}2
  # KDE tends to automount.. so try an umount:
  if mount |grep -qw ${TARGET}3 ; then
    umount ${TARGET}3 || true
  fi
  mkfs.ext4 -F -F -L "${LIVELABEL}" -m 0 ${TARGET}3
  tune2fs -c 0 -i 0 ${TARGET}3

fi # End [ $REFRESH -eq 0 ]

# Create temporary mount points for the ISO file and USB device:
mkdir -p /mnt
# ISO mount:
ISOMNT=$(mktemp -d -p /mnt -t alieniso.XXXXXX)
if [ ! -d $ISOMNT ]; then
  echo "*** Failed to create a temporary mount point for the ISO!"
  cleanup
  exit 1
else
  chmod 711 $ISOMNT
fi
# USB mounts:
USBMNT=$(mktemp -d -p /mnt -t alienusb.XXXXXX)
if [ ! -d $USBMNT ]; then
  echo "*** Failed to create a temporary mount point for the USB device!"
  cleanup
  exit 1
else
  chmod 711 $USBMNT
fi
US2MNT=$(mktemp -d -p /mnt -t alienus2.XXXXXX)
if [ ! -d $US2MNT ]; then
  echo "*** Failed to create a temporary mount point for the USB device!"
  cleanup
  exit 1
else
  chmod 711 $US2MNT
fi

# Mount the Linux partition:
mount -t auto ${TARGET}3 ${USBMNT}

# Loop-mount the ISO (or 1st partition if this is a hybrid ISO):
mount -o loop ${SLISO} ${ISOMNT}

# Find out if the ISO contains an EFI bootloader and use it:
if [ ! -f ${ISOMNT}/EFI/BOOT/boot*.efi ]; then
  EFIBOOT=0
  echo "-- Note: UEFI boot file 'bootx64.efi' or 'bootia32.efi' not found on ISO."
  echo "-- UEFI boot will not be supported"
else
  EFIBOOT=1
fi

if [ $REFRESH -eq 0 ]; then
  # Collect data from the ISO initrd:
  read_initrd ${ISOMNT}/boot/initrd.img
else
  # Collect data from the USB initrd:
  read_initrd ${USBMNT}/boot/initrd.img
  # Display the old Live version:
  OLDVERSION="$(cat ${USBMNT}/.isoversion 2>/dev/null)"
  if [ -n "${OLDVERSION}" -a -n "${VERSION}" ]; then
    echo "--- Refreshing Live OS on USB (${OLDVERSION}) to '${VERSION}'."
  fi
fi

# Copy the ISO content into the USB Linux partition:
echo "--- Copying files from ISO to USB... takes some time."
if [ $VERBOSE -eq 1 ]; then
  # Show verbose progress:
  rsync -rlptD -v --progress --exclude=EFI ${ISOMNT}/* ${USBMNT}/
elif [ -z "$(rsync  --info=progress2 2>&1 |grep "unknown option")" ]; then
  # Use recent rsync to display some progress because this can take _long_ :
  rsync -rlptD --no-inc-recursive --info=progress2 --exclude=EFI \
    ${ISOMNT}/* ${USBMNT}/
else
  # Remain silent if we have an older rsync:
  rsync -rlptD --exclude=EFI ${ISOMNT}/* ${USBMNT}/
fi

if [ $REFRESH -eq 1 ]; then
  # Clean out old Live system data:
  echo "--- Cleaning out old Live system data."
  LIVEMAIN="$(echo $(find ${ISOMNT} -name "0099*") |rev |cut -d/ -f3 |rev)"
  rsync -rlptD --delete \
    ${ISOMNT}/${LIVEMAIN}/system/ ${USBMNT}/${LIVEMAIN}/system/
  if [ -f ${USBMNT}/boot/extlinux/ldlinux.sys ]; then
    chattr -i ${USBMNT}/boot/extlinux/ldlinux.sys 2>/dev/null 
  fi
  rsync -rlptD --delete \
    ${ISOMNT}/boot/ ${USBMNT}/boot/
fi

# Write down the version of the ISO image:
if [ -n "$VERSION" ]; then
  echo "$VERSION" > ${USBMNT}/.isoversion
fi

if [ -n "${HLUKSSIZE}" ]; then
  # Create LUKS container file for /home:
  create_container ${TARGET}3 ${HLUKSSIZE} ${SLHOME} luks /home
  LUKSHOME=${CNTFILE}
fi

# Update the initrd with regard to USB wait time, persistence and LUKS.
# If this is a refresh and anything changed to persistence, then the
# variable $PERSISTENCE will have the correct value when exing this function:
# If you want to move your LUKS home containerfile you'll have to do that
# manually - not a supported option for now.
update_initrd ${USBMNT}/boot/initrd.img

if [ $REFRESH -eq 1 ]; then
  # Determine what we need to do with persistence if this is a refresh.
  if [ "${PERSISTENCE}" != "${OLDPERSISTENCE}" ]; then
    # The user specified a nonstandard persistence, so move the old one first;
    # hide any errors if it did not *yet* exist:
    mkdir -p ${USBMNT}/$(dirname ${PERSISTENCE})
    mv ${USBMNT}/${OLDPERSISTENCE}.img ${USBMNT}/${PERSISTENCE}.img 2>/dev/null
    mv ${USBMNT}/${OLDPERSISTENCE} ${USBMNT}/${PERSISTENCE} 2>/dev/null
  fi
  if [ -f ${USBMNT}/${PERSISTENCE}.img ]; then
    # If a persistence container exists, we re-use it:
    PERSISTTYPE="file"
    if cryptsetup isLuks ${USBMNT}/${PERSISTENCE}.img ; then
      # If the persistence file is LUKS encrypted we need to record its size:
      PLUKSSIZE=$(( $(du -sk $USBMNT/${PERSISTENCE}.img |tr '\t' ' ' |cut -f1 -d' ') / 1024 ))
    fi
  elif [ -d ${USBMNT}/${PERSISTENCE} -a "${PERSISTTYPE}" = "file" ]; then
    # A persistence directory exists but the user wants a container now;
    # so we will delete the persistence directory and create a container file
    # (sorry persistent data will not be migrated):
    rm -rf ${USBMNT}/${PERSISTENCE}
  fi
fi

if [ "${PERSISTTYPE}" = "dir" ]; then
  # Create persistence directory:
  mkdir -p ${USBMNT}/${PERSISTENCE}
elif [ "${PERSISTTYPE}" = "file" ]; then
  # Create container file for persistent storage.
  # If it is not going to be LUKS encrypted, we create a sparse file
  # that will at most eat up 90% of free space. Sparse means, the actual
  # block allocation will start small and grows as more changes are written.
  # Note: the word "persistence" below is a keyword for create_container:
  if [ -z "${PLUKSSIZE}" ]; then
    # Un-encrypted container:
    create_container ${TARGET}3 90% ${PERSISTENCE} none persistence
  else
    # LUKS-encrypted container:
    create_container ${TARGET}3 ${PLUKSSIZE} ${PERSISTENCE} luks persistence
  fi
else
  echo "*** Unknown persistence type '${PERSISTTYPE}'!"
  cleanup
  exit 1 
fi

# Use extlinux to make the USB device bootable:
echo "--- Making the USB drive '$TARGET' bootable using extlinux..."
mv ${USBMNT}/boot/syslinux ${USBMNT}/boot/extlinux
mv ${USBMNT}/boot/extlinux/isolinux.cfg ${USBMNT}/boot/extlinux/extlinux.conf
rm -f ${USBMNT}/boot/extlinux/isolinux.*
extlinux --install ${USBMNT}/boot/extlinux

if [ $EFIBOOT -eq 1 ]; then
  # Mount the EFI partition and copy /EFI as well as /boot directories into it:
  mount -t vfat -o shortname=mixed ${TARGET}2 ${US2MNT}
  mkdir -p ${US2MNT}/EFI/BOOT
  rsync -rlptD ${ISOMNT}/EFI/BOOT/* ${US2MNT}/EFI/BOOT/
  mkdir -p ${USBMNT}/boot
  echo "--- Copying EFI boot files from ISO to USB."
  if [ $VERBOSE -eq 1 ]; then
    rsync -rlptD -v ${ISOMNT}/boot/* ${US2MNT}/boot/
  else
    rsync -rlptD ${ISOMNT}/boot/* ${US2MNT}/boot/
  fi
  if [ $REFRESH -eq 1 ]; then
    # Clean out old Live system data:
    echo "--- Cleaning out old Live system data."
    rsync -rlptD --delete \
      ${ISOMNT}/EFI/BOOT/ ${US2MNT}/EFI/BOOT/
    rsync -rlptD --delete \
      ${ISOMNT}/boot/ ${US2MNT}/boot/
  fi
  # Copy the modified initrd over from the Linux partition:
  cat ${USBMNT}/boot/initrd.img > ${US2MNT}/boot/initrd.img
  sync
fi

# No longer needed:
if mount |grep -qw ${USBMNT} ; then umount ${USBMNT} ; fi
if mount |grep -qw ${US2MNT} ; then umount ${US2MNT} ; fi

# Unmount/remove stuff:
cleanup

# Install a GPT compatible MBR record:
if [ -f /usr/share/syslinux/gptmbr.bin ]; then
  cat /usr/share/syslinux/gptmbr.bin > ${TARGET}
else
  echo "*** Failed to make USB device bootable - 'gptmbr.bin' not found!"
  cleanup
  exit 1 
fi

# THE END