alarm-panel-esp8266.yaml

####
##
## Konnected Alarm Panel (ESP8266)
## Firmware configuration for ESPHome
##
## filename: alarm-panel-esp8266.yaml
## GitHub: https://github.com/konnected-io/konnected-esphome
## Buy Konnected hardware: https://konnected.io
## Help & Support: https://help@konnected.io (support is provided for purchasers of Konnected hardware)
##
## Copyright© 2023 Konnected Inc.
##
## Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation 
## files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, 
## modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software
## is furnished to do so, subject to the following conditions:
##
## The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
##
## THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
## OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE 
## LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR 
## IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
##
####

####
# GENERAL SETTINGS
# Customize these variables to your preferences and needs
# more: https://esphome.io/guides/configuration-types.html#substitutions
substitutions:

  ####
  # NAME
  # By default, the name of the ESPHome device is "alarm-panel-pro-xxxxxx" where xxxxxx is a unique identifier. The device's
  # hostname on your network is also defined by the name, defaulting to "alarm-panel-pro-xxxxxx.local". Edit this variable to
  # customize the name and hostname. Note: only lowercase characters, numbers and hyphen(-) are allowed.
  name: alarm-panel
  friendly_name: Alarm Panel
  project_name: konnected.alarm-panel-esp8266
  project_version: "0.1.0"

  ####
  # SETTINGS
  sensor_debounce_time: 200ms
  warning_beep_pulse_time: 100ms
  warning_beep_pause_time: 130ms
  warning_beep_internal_only: "false"

  ####
  # ZONE MAPPING
  # Do not edit this section.
  zone1: D1
  zone2: D2
  zone3: D5
  zone4: D6
  zone5: D7
  zone6: D9
  alarm: D8
  out: D8
  status_led: D4
  
  ####
  # CONNECTION MAPPINGS
  warning_beep_pin: $out

####
# INPUT ZONE COMMON SETTINGS
.input_zone_common: &input_zone_common
  platform: gpio   
  filters:
    - delayed_on_off: $sensor_debounce_time
  on_state:
    then:
      - light.turn_on: blue_status_led
      - delay: 100ms
      - light.turn_off: blue_status_led

####
# INPUT ZONES: BINARY SENSOR SETUP
# A "Binary Sensor" is any type of sensor that has two states, such as open/closed or detected/not-detected.
# Set up zones for door, window, motion, smoke/fire, CO, water/leak sensors in this section by repeating the configuration
# block below for each zone.
binary_sensor:

  - id: zone1
    name: Zone 1
    pin:
      number: $zone1
      mode: INPUT_PULLUP
    <<: *input_zone_common

  - id: zone2
    name: Zone 2    
    pin:
      number: $zone2
      mode: INPUT_PULLUP
    <<: *input_zone_common

  - id: zone3
    name: Zone 3
    pin:
      number: $zone3
      mode: INPUT_PULLUP
    <<: *input_zone_common

  - id: zone4
    name: Zone 4
    pin:
      number: $zone4
      mode: INPUT_PULLUP
    <<: *input_zone_common

  - id: zone5
    name: Zone 5
    pin:
      number: $zone5
      mode: INPUT_PULLUP
    <<: *input_zone_common

  - id: zone6
    name: Zone 6
    pin:
      number: $zone6
      mode: INPUT_PULLUP
    <<: *input_zone_common

switch:   
  - id: alarm
    name: Alarm
    pin: $alarm
    platform: gpio
    icon: mdi:bullhorn

####
# PACKAGES
# Each package includes the alarm panel feature
# Remove or comment out any packages that you do not need or want.
packages:

  ####
  # CORE
  # This package is required and sets up core features.
  # core: !include packages/core-esp8266.yaml
  core: github://konnected-io/konnected-esphome/packages/core-esp8266.yaml@master
  
  ####
  # WIFI
  # Enables WiFi connectivity and diagnostics.
  # wifi: !include packages/wifi.yaml
  wifi: github://konnected-io/konnected-esphome/packages/wifi.yaml@master

  ####
  # WARNING BEEP
  # Enables a 'Warning Beep' entity, intended to be used with a piezo buzzer. This is 
  # implemented using a light entity with strobe effect to create a repeated beeping sound.
  # warning_beep: !include packages/warning-beep.yaml
  warning_beep: github://konnected-io/konnected-esphome/packages/warning-beep.yaml@master

  ####
  # STATUS LED
  # Enables the onboard blue status LED as an activity/error indicator
  # status_led: !include packages/status-led.yaml
  status_led: github://konnected-io/konnected-esphome/packages/status-led.yaml@master
  
dashboard_import:
  package_import_url: github://konnected-io/konnected-esphome/alarm-panel-esp8266.yaml@master
  import_full_config: true

####
# WEB SEVER
# Enables the built-in web server for viewing the device state, internals and controls via web browser
# on the same local network as the device.
web_server:
  include_internal: true

#### 
# LOGGER
# more: https://esphome.io/components/logger.html
logger:

####
# NATIVE API for HOME ASSISTANT
# Enables the native API for Home Assistant
# more: https://esphome.io/components/api.html
api:

#### 
# OTA UPDATES
# Enables over-the-air updates
# more: https://esphome.io/components/ota.html
ota: