diff --git a/mt-bgpv67/readme.md b/mt-bgpv67/readme.md
index f7f7970..912717a 100644
--- a/mt-bgpv67/readme.md
+++ b/mt-bgpv67/readme.md
@@ -1 +1,26 @@
 # BGP Introduction (comparison between MikroTik RouterOS v6.x and V7.x
+<p>GNS3 project dump file is included in this folder you can load this on your GNS3 to test it.<br>
+GNS3 version used is 2.2.23<br>
+MikroTik CHR version used is 6.45.8 and 7.1rc2<br>
+Default username and password of MikroTik images is admin:admin</p>
+
+### Configuration for RouterOS v6.x 
+```
+/interface bridge add name=lo disabled=no
+/ip address add address=172.16.1.1/32 interface=lo disabled=no
+/ip address add address=10.0.0.1/30 interface=ether1 disabled=no
+/ip address add address=192.168.10.1/24 interface=ether2 disabled=no
+/routing bgp instance add disabled=no as=100 name=AS100 router-id=172.16.1.1
+/routing bgp network add disabled=no network=192.168.10.0/24 
+/routing bgp peer add disabled=no instance=AS100 remote-address=10.0.0.2 remote-as=200 name=Peer200 
+```
+
+### Configuration for RouterOS v7.x
+```
+/interface/bridge/add name=lo disabled=no
+/ip/address/add address=172.16.2.2/32 interface=lo disabled=no
+/ip/address/add address=10.0.0.2/30 interface=ether1 disabled=no
+/ip/address/add address=192.168.20.1/24 interface=ether2 disabled=no
+/ip/firewall/address-list/add disabled=no list=bgp_advertise address=192.168.20.0/24
+/routing/bgp/connection/add disabled=no address-families=ip as=200 connect=yes listen=yes local.role=ebgp name=Peer100 remote.address=10.0.0.1 remote.as=100 router-id=172.16.2.2 output.network=bgp_advertise  
+```