extract-files.sh

#!/bin/bash

# Copyright (C) 2010 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#SOC=a31
DEVICE=flatfish
COMMON=common
MANUFACTURER=allwinner

if [[ -z "${ANDROIDFS_DIR}" && -d ../../../backup-${DEVICE}/system ]]; then
    ANDROIDFS_DIR=../../../backup-${DEVICE}
fi

if [[ -z "${ANDROIDFS_DIR}" ]]; then
    echo Pulling files from device
    DEVICE_BUILD_ID=`adb shell cat /system/build.prop | grep ro.build.display.id | sed -e 's/ro.build.display.id=//' | tr -d '\n\r'`
else
    echo Pulling files from ${ANDROIDFS_DIR}
    DEVICE_BUILD_ID=`cat ${ANDROIDFS_DIR}/system/build.prop | grep ro.build.display.id | sed -e 's/ro.build.display.id=//' | tr -d '\n\r'`
fi

case "$DEVICE_BUILD_ID" in
flatfish*|full_flatfish*)
    FIRMWARE=JB
    echo Found JB firmware with build ID $DEVICE_BUILD_ID >&2
    ;;
*)
    FIRMWARE=unknown
    echo Found unknown firmware with build ID $DEVICE_BUILD_ID >&2
    echo Please download a compatible backup-${DEVICE} directory.
    echo Check the ${DEVICE} intranet page for information on how to get one.
    exit -1
    ;;
esac

#backup the whole system
if [[ ! -d ../../../backup-${DEVICE}/system  && -z "${ANDROIDFS_DIR}" ]]; then
    echo Backing up system partition to backup-${DEVICE}
    mkdir -p ../../../backup-${DEVICE} &&
    adb pull /system ../../../backup-${DEVICE}/system
fi
echo pull done

BASE_PROPRIETARY_DEVICE_DIR=vendor
PROPRIETARY_DEVICE_DIR=../../../vendor
ROOT_DIR=../../..

echo BASE_PROPRIETARY_DEVICE_DIR=$BASE_PROPRIETARY_DEVICE_DIR
echo PROPRIETARY_DEVICE_DIR=$PROPRIETARY_DEVICE_DIR

if [[ -d ${PROPRIETARY_DEVICE_DIR} ]]; then
    rm -rf $PROPRIETARY_DEVICE_DIR
fi

mkdir -p $PROPRIETARY_DEVICE_DIR
PROPRIETARY_BLOBS_LIST=$PROPRIETARY_DEVICE_DIR/vendor-blobs.mk

for NAME in allwinner broadcom imgtec invensense
do
    mkdir -p $PROPRIETARY_DEVICE_DIR/$NAME/$DEVICE/proprietary
done

mkdir -p $ROOT_DIR/device/allwinner/flatfish/media
mkdir -p $ROOT_DIR/device/allwinner/flatfish/configs

(cat << EOF) | sed s/__COMMON__/$COMMON/g | sed s/__MANUFACTURER__/$MANUFACTURER/g > $PROPRIETARY_BLOBS_LIST
# Copyright (C) 2010 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# Prebuilt libraries that are needed to build open-source libraries

# All the blobs
PRODUCT_COPY_FILES += \\
EOF

# copy_file
# pull file from the device and adds the file to the list of blobs
#
# $1 = src name
# $2 = dst name
# $3 = directory path on device
# $4 = directory name in $PROPRIETARY_DEVICE_DIR
copy_file()
{
    echo Pulling \"$1\"
#    echo ANDROIDFS_DIR=${ANDROIDFS_DIR}
#    read
    if [[ -z "${ANDROIDFS_DIR}" ]]; then
        if [[ -d $PROPRIETARY_DEVICE_DIR/$4/ ]]; then
            adb pull /$3/$1 $PROPRIETARY_DEVICE_DIR/$4/$2
    elif [[ -d $ROOT_DIR/$4/ ]]; then
        adb pull /$3/$1 $ROOT_DIR/$4/$2
        else
            echo "$PROPRIETARY_DEVICE_DIR/$4/"
            echo "$ROOT_DIR/$4/"
            echo "Target folder didn't exist, failed to pull $1."
        fi
    else
           # Hint: Uncomment the next line to populate a fresh ANDROIDFS_DIR
           #       (TODO: Make this a command-line option or something.)
           # adb pull /$3/$1 ${ANDROIDFS_DIR}/$3/$1
        if [[ -d $PROPRIETARY_DEVICE_DIR/$4/ ]]; then
        cp ${ANDROIDFS_DIR}/$3/$1 $PROPRIETARY_DEVICE_DIR/$4/$2
        elif [[ -d $ROOT_DIR/$4/ ]]; then
            cp ${ANDROIDFS_DIR}/$3/$1 $ROOT_DIR/$4/$2
        else
            echo "$PROPRIETARY_DEVICE_DIR/$4/"
            echo "$ROOT_DIR/$4/"
            echo "Target folder didn't exist, failed to pull $1."
        fi
    fi

    if [[ -f $PROPRIETARY_DEVICE_DIR/$4/$2 ]]; then
        echo   $BASE_PROPRIETARY_DEVICE_DIR/$4/$2:$3/$2 \\ >> $PROPRIETARY_BLOBS_LIST
    elif [[ -f $ROOT_DIR/$4/$2 ]]; then
    echo   $4/$2:$3/$2 \\ >> $PROPRIETARY_BLOBS_LIST
    else
        echo Failed to pull $1. Giving up.
        if [ "$EXTRACT_BLUEDROID_FILES" == 1 ]; then
            echo
            echo "############################################################"
            echo "Can't find necessary file(s) of Bluedroid in the backup-${DEVICE} folder."
            echo "Please update the system image for supporting Bluedroid (Bug-986314), "
            echo "so that the needed binary files can be extracted from your flatfish device."
            echo "############################################################"
            echo
        fi
        exit -1
    fi
}

# copy_files
# pulls a list of files from the device and adds the files to the list of blobs
#
# $1 = list of files
# $2 = directory path on device
# $3 = directory name in $PROPRIETARY_DEVICE_DIR
copy_files()
{
    for NAME in $1
    do
        copy_file "$NAME" "$NAME" "$2" "$3"
    done
}

KERNEL_KO="
    actuator.ko
    ad5820_act.ko
    afa750.ko
    asix.ko
    aw5306_ts.ko
    bcmdhd.ko
    bma250.ko
    cam_detect.ko
    cci.ko
    dc_sunxi.ko
    device.ko
    disp.ko
    dw9714_act.ko
    example.ko
    ft5x_ts.ko
    fxos8700.ko
    g2d_33.ko
    hi253.ko
    hid-logitech-dj.ko
    kionix_tiny.ko
    l3gd20_gyr.ko
    lcd.ko
    lis3de_acc.ko
    lis3dh_acc.ko
    lsm303d.ko
    ltr303.ko
    mcs7830.ko
    mma7660.ko
    mma8452.ko
    mma865x.ko
    Module.symvers
    mpu6050.ko
    nand.ko
    ov8825_act.ko
    pvrsrvkm.ko
    qf9700.ko
    rtl8150.ko
    s5k4ec_mipi.ko
    scsi_wait_scan.ko
    sndi2s.ko
    sndpcm.ko
    sndspdif.ko
    sun6i-i2sdma.ko
    sun6i-i2s.ko
    sun6i-ir.ko
    sun6i-pcmdma.ko
    sun6i-pcm.ko
    sun6i-sndi2s.ko
    sun6i-sndpcm.ko
    sun6i_sndspdif.ko
    sun6i_spdif.ko
    sun6i_spdma.ko
    sw-keyboard.ko
    uvcvideo.ko
    vfe_os.ko
    vfe_subdev.ko
    vfe_v4l2.ko
    videobuf2-core.ko
    videobuf2-memops.ko
    videobuf2-vmalloc.ko
    videobuf-core.ko
    videobuf-dma-contig.ko
    "
copy_files "$KERNEL_KO" "system/vendor/modules" "allwinner/$DEVICE/proprietary"

SENSOR_LIB="
    libmllite.so
    libmplmpu.so
    libinvensense_hal.so
    libmlplatform.so
    "
copy_files "$SENSOR_LIB" "system/lib" "invensense/$DEVICE/proprietary"

SENSOR_HW="
    sensors.$DEVICE.so
    "
copy_files "$SENSOR_HW" "system/lib/hw" "invensense/$DEVICE/proprietary"

BROADCOM="
    bcm40183b2.hcd
    fw_bcm40183b2.bin
    fw_bcm40183b2_apsta.bin
    fw_bcm40183b2_p2p.bin
    nvram_gb9663.txt
    "
copy_files "$BROADCOM" "system/vendor/modules" "broadcom/$DEVICE/proprietary"

BROADCOM_BIN="
    glgps
    wl
    "
copy_files "$BROADCOM_BIN" "system/bin" "broadcom/$DEVICE/proprietary"

COMMON_ETC_GPS="
    gpsconfig.xml
    "
copy_files "$COMMON_ETC_GPS" "system/etc/gps" "broadcom/$DEVICE/proprietary"

IMGTEC_LIB="
    libCedarX.so
    libCedarA.so
    libcedarxosal.so
    libcedarv.so
    libcedarv_base.so
    libcedarv_adapter.so
    libve.so
    libthirdpartstream.so
    libcedarxsftstream.so
    libfacedetection.so
    libsunxi_alloc.so
    libjpgenc.so
    libaw_h264enc.so
    libcedarxbase.so
    libaw_audio.so
    libaw_audioa.so
    libswdrm.so
    libstagefright_soft_cedar_h264dec.so
    "
copy_files "$IMGTEC_LIB" "system/lib" "imgtec/$DEVICE/proprietary"

IMGTEC_VLIB="
    libglslcompiler.so
    libIMGegl.so
    libpvr2d.so
    libpvrANDROID_WSEGL.so
    libPVRScopeServices.so
    libsrv_init.so
    libsrv_um.so
    libusc.so
    "
copy_files "$IMGTEC_VLIB" "system/vendor/lib" "imgtec/$DEVICE/proprietary"

IMGTEC_EGL="
    libEGL_POWERVR_SGX544_115.so
    libGLESv1_CM_POWERVR_SGX544_115.so
    libGLESv2_POWERVR_SGX544_115.so
    "
copy_files "$IMGTEC_EGL" "system/vendor/lib/egl" "imgtec/$DEVICE/proprietary"

IMGTEC_HW="
    hwcomposer.$DEVICE.so
    gralloc.$DEVICE.so
    "
copy_files "$IMGTEC_HW" "system/vendor/lib/hw" "imgtec/$DEVICE/proprietary"

IMGTEC_BIN="
    pvrsrvctl
    "
copy_files "$IMGTEC_BIN" "system/vendor/bin" "imgtec/$DEVICE/proprietary"

COMMON_HW="
    lights.$DEVICE.so
    gps.$DEVICE.so
    camera.$DEVICE.so
    audio.primary.$DEVICE.so
    audio_policy.default.so
    gralloc.default.so
    "
copy_files "$COMMON_HW" "system/lib/hw" "allwinner/$DEVICE/proprietary"

AUDIO_A2DP_HW="
    audio.a2dp.default.so
    "
copy_files "$AUDIO_A2DP_HW" "system/lib/hw" "allwinner/$DEVICE/proprietary"

EXTRACT_BLUEDROID_FILES=1

BLUEDROID_HW="
    bluetooth.default.so
    "
copy_files "$BLUEDROID_HW" "system/lib/hw" "allwinner/$DEVICE/proprietary"

BLUEDROID_LIBS="
    libbt-hci.so
    libbt-utils.so
    "
copy_files "$BLUEDROID_LIBS" "system/lib" "allwinner/$DEVICE/proprietary"

BLUEDROID_CONF="
    bt_did.conf
    bt_stack.conf
    bt_vendor.conf
    "
copy_files "$BLUEDROID_CONF" "system/etc/bluetooth" "allwinner/$DEVICE/proprietary"

BLUEDROID_VENDOR_LIBS="
    libbt-vendor.so
    "
copy_files "$BLUEDROID_VENDOR_LIBS" "system/vendor/lib" "allwinner/$DEVICE/proprietary"

BLUEDROID_VENDOR_MODULES="
    BCM4330B1.hcd
    "
copy_files "$BLUEDROID_VENDOR_MODULES" "system/vendor/modules" "allwinner/$DEVICE/proprietary"

EXTRACT_BLUEDROID_FILES=""

TOOLS="
    data_resume.sh
    mke2fs.ext4
    mount.exfat
    preinstall.sh
    busybox
    fsck.exfat
    mkfs.exfat
    busybox-smp
    iostat
    mkntfs
    toolbox
    vold
    logcat
    go_recovery
    recovery
    "
copy_files "$TOOLS" "system/bin" "allwinner/$DEVICE/proprietary"

VENDOR_COMMON_LIBS="
    libril_audio.so
    libcodec_audio.so
    libril.so
    libcutils.so
    libsuspend.so
    libext4_utils.so
    libsensorservice.so
    librecovery.so
    "
copy_files "$VENDOR_COMMON_LIBS" "system/lib" "allwinner/$DEVICE/proprietary"

VENDOR_AW_LIBS="
    libOmxVdec.so
    libOmxVenc.so
    libOmxCore.so
    libstagefrighthw.so
    libtinyalsa.so
    libgui.so
    libui.so
    libhardware.so
    libhardware_legacy.so
    libstagefright.so
    "
copy_files "$VENDOR_AW_LIBS" "system/lib" "allwinner/$DEVICE/proprietary"

DEVICE_COMMON="
    media_codecs.xml
    audio_policy.conf
    phone_volume.conf
    wfd_blacklist.conf
    "
copy_files "$DEVICE_COMMON" "system/etc" "device/allwinner/common"

DEVICE_PERMISSIONS="
    tablet_core_hardware.xml
    "
copy_files "$DEVICE_PERMISSIONS" "system/etc/permissions" "device/allwinner/common"

DEVICE_BIN="
    sensors.sh
    "
copy_files "$DEVICE_BIN" "system/bin" "device/allwinner/common"

DEVICE_EGL_CFG="
    egl.cfg
    "
copy_files "$DEVICE_EGL_CFG" "system/lib/egl" "device/allwinner/common"

DEVICE_MEDIA="
    boot.wav
    "
copy_files "$DEVICE_MEDIA" "system/media" "device/allwinner/$DEVICE/media"

DEVICE_KEY_CFG="
    sw-keyboard.kl
    axp22-supplyer.kl
    "
copy_files "$DEVICE_KEY_CFG" "system/usr/keylayout" "device/allwinner/$DEVICE/configs"

DEVICE_IDC_CFG="
    ft5x_ts.idc
    "
copy_files "$DEVICE_IDC_CFG" "system/usr/idc" "device/allwinner/$DEVICE/configs"

DEVICE_GSENSOR_CFG="
    gsensor.cfg
    "
copy_files "$DEVICE_GSENSOR_CFG" "system/usr" "device/allwinner/$DEVICE/configs"

DEVICE_ETC_CFG="
    media_profiles.xml
    camera.cfg
    powervr.ini
    "
copy_files "$DEVICE_ETC_CFG" "system/etc" "device/allwinner/$DEVICE/configs"

DEVICE_ETC="
    gps.conf
    vold.fstab
    "
copy_files "$DEVICE_ETC" "system/etc" "device/allwinner/$DEVICE"

echo ...........extract done...
#read