Climate.heatpump sensor not working anymore after update 0.41.0

[robbert1977]

Describe the bug
After update SmartThinQ LGE to 0.41.0 the sensor climate disappeared

So now all automations are not working anymore
Need urgent fix

[berndthiel]

@ollo69 heatpump in auto mode show attribute "temperature" like 17, which cant be correct, where you take this temperature?
In Auto Mode the Heatpump adapt the target temp depend the outside temperature so had to adapt every 15min
So which Data you take their from reference?

[robbert1977]

@berndthiel comment on wrong issue?

Solved the climate.heatpump for now by using not the smartthinq integration but the LG integration with token
Not desired but a work around for now

[berndthiel]

Describe the bug After update SmartThinQ LGE to 0.41.0 the sensor climate disappeared

So now all automations are not working anymore Need urgent fix

@robbert1977 i didnt get what exact data you think you get?

climate. is shown when you manually update to 0.41.1 and reboot the HA

[berndthiel]

@berndthiel comment on wrong issue?

Solved the climate.heatpump for now by using not the smartthinq integration but the LG integration with token Not desired but a work around for now

manually update to 0.41.1 and reboot HA and it is fixed yes :)

[robbert1977]

I already rebooted HA several times of course after update it is required.
As you see in printscreen the climate.heatpump is not found

I expect to see this (whis is now from LG integration with access token)

[robbert1977]

sorry you said update to 41.1 I'll try

[berndthiel]

I already rebooted HA several times of course after update it is required. As you see in printscreen the climate.heatpump is not found

I expect to see this (whis is now from LG integration with access token)

@robbert1977 update manually to 0.41.1 as was updated some minutes before and issue is fixed !

[berndthiel]

@robbert1977 this Version https://github.com/ollo69/ha-smartthinq-sensors/releases/download/v0.41.1/smartthinq_sensors.zip fixed the issue you named , i had same ;)

[berndthiel]

@robbert1977 did you find out a way to get "water flow rate" and "outside temperature" from this integration or modbus?

[ollo69]

@robbert1977,

You need to update to v0.41.1, v0.41.0, have the issue.
If you are using HACS and it still not notify you for update, select the 3 dot (...) and update information, you will be notified about a new release:

[robbert1977]

@robbert1977 did you find out a way to get "water flow rate" and "outside temperature" from this integration or modbus?

think that can only be done by modbus not this integration.

[ollo69]

did you find out a way to get "water flow rate" and "outside temperature" from this integration or modbus?

Think that this discussion should be moved to #819

I don't exactly know how your devices work (I don't have heat pump), so you should provide example about what you expect compared to what you see on integration and attach integration diagnostic so that I can search for right place where to get right value. Probably I'm just using wrong information!

[robbert1977]

thank you both for the pointing out the updates closing the issue it all works again