ASSEMBLY_CUBE_Beamsplitter

Beam splitter Cube

This is the repository for the Beam splitter Cube.

To acquire the STL-files use the UC2-Configurator. The files themselves are in the RAW folder. The module can be built using injection-moulded (IM) or 3D-printed (3DP) cubes.

Purpose

It adapts a beam splitter cube to the UC2 system.

Properties

• design is derived from the base-cube

Parts

The Bill of Materials is always the most up-to-date version!

3D printing parts

• No support needed in all designs
• Carefully remove all support structures (if applicable)

The Cube consists of the following components.

Default:

• IM Cube which houses the insert and adapts it into a UC2 setup.
• The Beam splitter Insert which holds a glass beam splitter cube and adapts it to the base cube (20_Cube_Insert_Beamsplitter_v3.stl)

Alternatives:

• 3DP Cube which will be screwed to the Lid. Here all the functions (i.e. Mirrors, LED's etc.) find their place (10_Cube_1x1_v3.stl) and 3DP Lid which closes the Cube (10_Lid_1x1_v3.stl) - find the details in ASSEMBLY_CUBE_Base

Additional parts

• Check out the RESOURCES for more information!
• 1x Beam splitter cube (20×20 mm²) (Artikel 2137) 🢂

Assembly

• Remove any support and clean the part
• Insert the glass beam splitter inside its holder
• Slide the beam splitter holder into the Cube Body
• Close the cube accordingly (IM/3DP)
• Done!

Tutorial with images

❕ This tutorial shows a UC2_v2 cube but the assembly of the insert is still the same. For assembly of the cube (IM/3DP) check the ASSEMBLY_CUBE_Base.

1. All parts for this model

2. Mount the glass block

3. Put the insert into the cube

4. Add the lid and the screws

5. Screw it!

6. Done!

Safety

Don't touch the smooth glass surfaces, only the sanded ones!