schedule-test.yaml

esphome:
  name: "schedule-test"

esp32:
  board: esp32dev
  framework:
    type: arduino
#    type: esp-idf
#    version: recommended
api:
#  password: !secret api_password
  encryption: 
    key: !secret api_key
ota:
  platform: esphome
  password: !secret ota_password
debug:
  update_interval: 5s

text_sensor:
  - platform: debug
    device:
      name: "Device Info"
    reset_reason:
      name: "Reset Reason"

logger:
    
    # Enable fallback hotspot (captive portal) in case wifi connection fails
    level: DEBUG
    logs: 
        api: DEBUG
        homeassistant: DEBUG
        nextion: DEBUG
        api.service: DEBUG
        sensor: DEBUG
        scheduler: DEBUG
        dallas: DEBUG
        i2c: DEBUG
        ext_eeprom: DEBUG

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: !secret ap_ssid
    password: !secret ap_password

captive_portal:
uart:
  rx_pin: GPIO16 
  tx_pin: GPIO17 
  baud_rate: 115200

time:
  - platform: homeassistant
    id: homeassistant_time

i2c:
  sda: GPIO21
  scl: GPIO22
  scan: true    
  id: bus_1

external_components:
  - source: github://pebblebed-tech/esphome@add-serial-EEPROM-feature
    components: [ external_eeprom ] 

external_eeprom:
  id: ext_eeprom_component_1
  address: 0x57
  ee_memory_type: 24XX32
  i2c_buffer_size: 128
  i2c_id: bus_1

globals:
  - id: my_global_int
    type: int
    restore_value: yes
    initial_value: '0'
  - id: my_global_string
    type: int[5]
    restore_value: yes
    initial_value: '{0,1,2,3,4}'

switch:
  - platform: template    
    name: "Test EEPROM Switch"
    id: "test_ee_switch"
    turn_on_action:
        - globals.set:
            id: my_global_int
            value: '10'
        - lambda: |-
              uint8_t myValue1 = 42;
              ext_eeprom_component_1->write8(15, myValue1);
              uint8_t myRdValue1;
              myRdValue1 = ext_eeprom_component_1->read8(15);
              ESP_LOGD("Eeprom", "I read: %d",myRdValue1 );
              int32_t myValue2 = -480;
              ext_eeprom_component_1->write_object(10, myValue2); //(location, data)
              int32_t myRead2;
              ext_eeprom_component_1->read_object(10, myRead2); //location to read, thing to put data into
              ESP_LOGD("Eeprom", "I read: %d",myRead2 );
              float myValue3 = -78.35;
              ext_eeprom_component_1->write_object(20, myValue3); //(location, data)
              float myRead3;
              ext_eeprom_component_1->read_object(20, myRead3); //location to read, thing to put data into
              ESP_LOGD("Eeprom","I read: %f",myRead3);
              std::string myString = "This is a test of a very long string This is a test of a very long string This is a test of a very long string This is a test of a very long string This is a test of a very long string This is a test of a very long string ";
              ext_eeprom_component_1->write_string_to_eeprom(40, myString); //(location, data)
              std::string myRead4;
              ext_eeprom_component_1->read_string_from_eeprom(40, myRead4); //location to read, thing to put data into
              ESP_LOGD("Eeprom","I read: %s",myRead4.c_str());
              ext_eeprom_component_1->write8(0, 0);
              ext_eeprom_component_1->write8(1, 1);
              ext_eeprom_component_1->write8(2, 2);
              ext_eeprom_component_1->write8(3, 3);
              ext_eeprom_component_1->write8(4, 4);
              ext_eeprom_component_1->write8(5, 5);
              ext_eeprom_component_1->write8(6, 6);
              ext_eeprom_component_1->write8(7, 7);
              ext_eeprom_component_1->dump_eeprom(0,8);
  - platform: factory_reset
    name: Restart with Factory Default Settings