From 042e68b228eca92acc65a0518ff37d4c0b13dddd Mon Sep 17 00:00:00 2001 From: Peter Haag Date: Sat, 2 Dec 2023 15:09:00 +0100 Subject: [PATCH] Cleanup filter. String arguments in filter elements may be single or double quoted. Strings without quotes are accepted as strings as long as the string is not a reserved filter key word.# --- doc/Doxyfile.in | 616 +++++++++++++++++++++++++++++----------------- man/nfdump.1 | 37 ++- src/lib/grammar.y | 73 +----- src/lib/scanner.l | 33 ++- src/test/nftest.c | 6 +- 5 files changed, 461 insertions(+), 304 deletions(-) diff --git a/doc/Doxyfile.in b/doc/Doxyfile.in index ef38a82d..2b86c911 100644 --- a/doc/Doxyfile.in +++ b/doc/Doxyfile.in @@ -1,4 +1,4 @@ -# Doxyfile 1.8.11 +# Doxyfile 1.9.3 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -179,6 +179,16 @@ SHORT_NAMES = NO JAVADOC_AUTOBRIEF = YES +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -199,6 +209,14 @@ QT_AUTOBRIEF = NO MULTILINE_CPP_IS_BRIEF = NO +# By default Python docstrings are displayed as preformatted text and doxygen's +# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the +# doxygen's special commands can be used and the contents of the docstring +# documentation blocks is shown as doxygen documentation. +# The default value is: YES. + +PYTHON_DOCSTRING = YES + # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the # documentation from any documented member that it re-implements. # The default value is: YES. @@ -222,20 +240,19 @@ TAB_SIZE = 8 # the documentation. An alias has the form: # name=value # For example adding -# "sideeffect=@par Side Effects:\n" +# "sideeffect=@par Side Effects:^^" # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading -# "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# "Side Effects:". Note that you cannot put \n's in the value part of an alias +# to insert newlines (in the resulting output). You can put ^^ in the value part +# of an alias to insert a newline as if a physical newline was in the original +# file. When you need a literal { or } or , in the value part of an alias you +# have to escape them by means of a backslash (\), this can lead to conflicts +# with the commands \{ and \} for these it is advised to use the version @{ and +# @} or use a double escape (\\{ and \\}) ALIASES = -# This tag can be used to specify a number of word-keyword mappings (TCL only). -# A mapping has the form "name=value". For example adding "class=itcl::class" -# will allow you to use the command class in the itcl::class meaning. - -TCL_SUBST = - # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources # only. Doxygen will then generate output that is more tailored for C. For # instance, some of the names that are used will be different. The list of all @@ -264,28 +281,40 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and -# language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# language is one of the parsers supported by doxygen: IDL, Java, JavaScript, +# Csharp (C#), C, C++, Lex, D, PHP, md (Markdown), Objective-C, Python, Slice, +# VHDL, Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files). For instance to make doxygen treat .inc files +# as Fortran files (default is PHP), and .f files as C (default is Fortran), +# use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # # Note that for custom extensions you also need to set FILE_PATTERNS otherwise -# the files are not read by doxygen. +# the files are not read by doxygen. When specifying no_extension you should add +# * to the FILE_PATTERNS. +# +# Note see also the list of default file extension mappings. EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -293,6 +322,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = YES +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -318,7 +356,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -404,6 +442,19 @@ TYPEDEF_HIDES_STRUCT = NO LOOKUP_CACHE_SIZE = 0 +# The NUM_PROC_THREADS specifies the number threads doxygen is allowed to use +# during processing. When set to 0 doxygen will based this on the number of +# cores available in the system. You can set it explicitly to a value larger +# than 0 to get more control over the balance between CPU load and processing +# speed. At this moment only the input processing can be done using multiple +# threads. Since this is still an experimental feature the default is set to 1, +# which effectively disables parallel processing. Please report any issues you +# encounter. Generating dot graphs in parallel is controlled by the +# DOT_NUM_THREADS setting. +# Minimum value: 0, maximum value: 32, default value: 1. + +NUM_PROC_THREADS = 1 + #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- @@ -424,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = NO +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -461,6 +518,13 @@ EXTRACT_LOCAL_METHODS = NO EXTRACT_ANON_NSPACES = NO +# If this flag is set to YES, the name of an unnamed parameter in a declaration +# will be determined by the corresponding definition. By default unnamed +# parameters remain unnamed in the output. +# The default value is: YES. + +RESOLVE_UNNAMED_PARAMS = YES + # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all # undocumented members inside documented classes or files. If set to NO these # members will be included in the various overviews, but no documentation @@ -478,8 +542,8 @@ HIDE_UNDOC_MEMBERS = NO HIDE_UNDOC_CLASSES = NO # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend -# (class|struct|union) declarations. If set to NO, these declarations will be -# included in the documentation. +# declarations. If set to NO, these declarations will be included in the +# documentation. # The default value is: NO. HIDE_FRIEND_COMPOUNDS = NO @@ -498,11 +562,18 @@ HIDE_IN_BODY_DOCS = NO INTERNAL_DOCS = YES -# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file -# names in lower-case letters. If set to YES, upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# With the correct setting of option CASE_SENSE_NAMES doxygen will better be +# able to match the capabilities of the underlying filesystem. In case the +# filesystem is case sensitive (i.e. it supports files in the same directory +# whose names only differ in casing), the option must be set to YES to properly +# deal with such files in case they appear in the input. For filesystems that +# are not case sensitive the option should be be set to NO to properly deal with +# output files written for symbols that only differ in casing, such as for two +# classes, one named CLASS and the other named Class, and to also support +# references to files without having to specify the exact matching casing. On +# Windows (including Cygwin) and MacOS, users should typically set this option +# to NO, whereas on Linux or other Unix flavors it should typically be set to +# YES. # The default value is: system dependent. CASE_SENSE_NAMES = YES @@ -521,6 +592,12 @@ HIDE_SCOPE_NAMES = NO HIDE_COMPOUND_REFERENCE= NO +# If the SHOW_HEADERFILE tag is set to YES then the documentation for a class +# will show which file needs to be included to use the class. +# The default value is: YES. + +SHOW_HEADERFILE = YES + # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of # the files that are included by a file in the documentation of that file. # The default value is: YES. @@ -678,7 +755,8 @@ FILE_VERSION_FILTER = # output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. You can # optionally specify a file name after the option, if omitted DoxygenLayout.xml -# will be used as the name of the layout file. +# will be used as the name of the layout file. See also section "Changing the +# layout of pages" for information. # # Note that if you run doxygen from a directory containing a file called # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE @@ -689,7 +767,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -724,23 +802,35 @@ WARNINGS = YES WARN_IF_UNDOCUMENTED = YES # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some parameters -# in a documented function, or documenting parameters that don't exist or using -# markup commands wrongly. +# potential errors in the documentation, such as documenting some parameters in +# a documented function twice, or documenting parameters that don't exist or +# using markup commands wrongly. # The default value is: YES. WARN_IF_DOC_ERROR = YES +# If WARN_IF_INCOMPLETE_DOC is set to YES, doxygen will warn about incomplete +# function parameter documentation. If set to NO, doxygen will accept that some +# parameters have no documentation without warning. +# The default value is: YES. + +WARN_IF_INCOMPLETE_DOC = YES + # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return -# value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# value. If set to NO, doxygen will only warn about wrong parameter +# documentation, but not about the absence of documentation. If EXTRACT_ALL is +# set to YES then this flag will automatically be disabled. See also +# WARN_IF_INCOMPLETE_DOC # The default value is: NO. WARN_NO_PARAMDOC = NO # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when -# a warning is encountered. +# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS +# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but +# at the end of the doxygen process doxygen will return with a non-zero status. +# Possible values are: NO, YES and FAIL_ON_WARNINGS. # The default value is: NO. WARN_AS_ERROR = NO @@ -757,7 +847,10 @@ WARN_FORMAT = # The WARN_LOGFILE tag can be used to specify a file to which warning and error # messages should be written. If left blank the output is written to standard -# error (stderr). +# error (stderr). In case the file specified cannot be opened for writing the +# warning and error messages are written to standard error. When as file - is +# specified the warning and error messages are written to standard output +# (stdout). WARN_LOGFILE = @@ -776,8 +869,8 @@ INPUT = @top_srcdir@/src # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of -# possible encodings. +# documentation (see: +# https://www.gnu.org/software/libiconv/) for the list of possible encodings. # The default value is: UTF-8. INPUT_ENCODING = UTF-8 @@ -790,11 +883,15 @@ INPUT_ENCODING = UTF-8 # need to set EXTENSION_MAPPING for the extension otherwise the files are not # read by doxygen. # +# Note the list of default checked file patterns might differ from the list of +# default file extension mappings. +# # If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, # *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, -# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, -# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f, *.for, *.tcl, -# *.vhd, *.vhdl, *.ucf, *.qsf, *.as and *.js. +# *.hh, *.hxx, *.hpp, *.h++, *.l, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, +# *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C +# comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, +# *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.c \ *.h @@ -851,7 +948,7 @@ EXCLUDE_PATTERNS = Makefile.* \ # (namespaces, classes, functions, etc.) that should be excluded from the # output. The symbol name can be a fully qualified name, a word, or if the # wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test +# ANamespace::AClass, ANamespace::*Test # # Note that the wildcards are matched against the file with absolute path, so to # exclude all test directories use the pattern */test/* @@ -967,7 +1064,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = YES @@ -999,12 +1096,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1026,25 +1123,6 @@ USE_HTAGS = NO VERBATIM_HEADERS = YES -# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the -# cost of reduced performance. This can be particularly helpful with template -# rich C++ code for which doxygen's built-in parser lacks the necessary type -# information. -# Note: The availability of this option depends on whether or not doxygen was -# generated with the -Duse-libclang=ON option for CMake. -# The default value is: NO. - -CLANG_ASSISTED_PARSING = NO - -# If clang assisted parsing is enabled you can provide the compiler with command -# line options that you would normally use when invoking the compiler. Note that -# the include paths will already be set by doxygen for the files and directories -# specified with INPUT and INCLUDE_PATH. -# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. - -CLANG_OPTIONS = - #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1056,13 +1134,6 @@ CLANG_OPTIONS = ALPHABETICAL_INDEX = NO -# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in -# which the alphabetical index list will be split. -# Minimum value: 1, maximum value: 20, default value: 5. -# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. - -COLS_IN_ALPHA_INDEX = 5 - # In case all classes in a project start with a common prefix, all classes will # be put under the same header in the alphabetical index. The IGNORE_PREFIX tag # can be used to specify a prefix (or a list of prefixes) that should be ignored @@ -1162,8 +1233,8 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to -# this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# this color. Hue is specified as an angle on a color-wheel, see +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1172,7 +1243,7 @@ HTML_EXTRA_FILES = HTML_COLORSTYLE_HUE = 220 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors -# in the HTML output. For a value of 0 the output will use grayscales only. A +# in the HTML output. For a value of 0 the output will use gray-scales only. A # value of 255 will produce the most vivid colors. # Minimum value: 0, maximum value: 255, default value: 100. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1199,6 +1270,17 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via JavaScript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have JavaScript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1222,13 +1304,14 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a -# Makefile in the HTML output directory. Running make will produce the docset in -# that directory and running make install will install the docset in +# environment (see: +# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To +# create a documentation set, doxygen will generate a Makefile in the HTML +# output directory. Running make will produce the docset in that directory and +# running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1242,6 +1325,13 @@ GENERATE_DOCSET = NO DOCSET_FEEDNAME = "Doxygen generated docs" +# This tag determines the URL of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDURL = + # This tag specifies a string that should uniquely identify the documentation # set bundle. This should be a reverse domain-name style string, e.g. # com.mycompany.MyDocSet. Doxygen will append .docset to the name. @@ -1267,8 +1357,12 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on -# Windows. +# on Windows. In the beginning of 2021 Microsoft took the original page, with +# a.o. the download links, offline the HTML help workshop was already many years +# in maintenance mode). You can download the HTML help workshop from the web +# archives at Installation executable (see: +# http://web.archive.org/web/20160201063255/http://download.microsoft.com/downlo +# ad/0/A/9/0A939EF6-E31C-430F-A3DF-DFAE7960D564/htmlhelp.exe). # # The HTML Help Workshop contains a compiler that can convert all HTML output # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML @@ -1298,7 +1392,7 @@ CHM_FILE = HHC_LOCATION = # The GENERATE_CHI flag controls if a separate .chi index file is generated -# (YES) or that it should be included in the master .chm file (NO). +# (YES) or that it should be included in the main .chm file (NO). # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1343,7 +1437,8 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1351,8 +1446,8 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- -# folders). +# Folders (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1360,30 +1455,30 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = -# The QHG_LOCATION tag can be used to specify the location of Qt's -# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the -# generated .qhp file. +# The QHG_LOCATION tag can be used to specify the location (absolute path +# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to +# run qhelpgenerator on the generated .qhp file. # This tag requires that the tag GENERATE_QHP is set to YES. QHG_LOCATION = @@ -1426,16 +1521,28 @@ DISABLE_INDEX = NO # to work a browser that supports JavaScript, DHTML, CSS and frames is required # (i.e. any modern browser). Windows users are probably better off using the # HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can -# further fine-tune the look of the index. As an example, the default style -# sheet generated by doxygen has an example that shows how to put an image at -# the root of the tree instead of the PROJECT_NAME. Since the tree basically has -# the same information as the tab index, you could consider setting -# DISABLE_INDEX to YES when enabling this option. +# further fine tune the look of the index (see "Fine-tuning the output"). As an +# example, the default style sheet generated by doxygen has an example that +# shows how to put an image at the root of the tree instead of the PROJECT_NAME. +# Since the tree basically has the same information as the tab index, you could +# consider setting DISABLE_INDEX to YES when enabling this option. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_TREEVIEW = NO +# When both GENERATE_TREEVIEW and DISABLE_INDEX are set to YES, then the +# FULL_SIDEBAR option determines if the side bar is limited to only the treeview +# area (value NO) or if it should extend to the full height of the window (value +# YES). Setting this to YES gives a layout similar to +# https://docs.readthedocs.io with more room for contents, but less room for the +# project logo, title, and description. If either GENERATE_TREEVIEW or +# DISABLE_INDEX is set to NO, this option has no effect. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FULL_SIDEBAR = NO + # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that # doxygen will group on one line in the generated HTML documentation. # @@ -1460,6 +1567,24 @@ TREEVIEW_WIDTH = 250 EXT_LINKS_IN_WINDOW = NO +# If the OBFUSCATE_EMAILS tag is set to YES, doxygen will obfuscate email +# addresses. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +OBFUSCATE_EMAILS = YES + +# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg +# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see +# https://inkscape.org) to generate formulas as SVG images instead of PNGs for +# the HTML output. These images will generally look nicer at scaled resolutions. +# Possible values are: png (the default) and svg (looks nicer but requires the +# pdf2svg or inkscape tool). +# The default value is: png. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FORMULA_FORMAT = png + # Use this tag to change the font size of LaTeX formulas included as images in # the HTML documentation. When you change the font size after a successful # doxygen run you need to manually remove any form_*.png images from the HTML @@ -1469,7 +1594,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1480,8 +1605,14 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES +# The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands +# to create new LaTeX commands to be used in formulas as building blocks. See +# the section "Including formulas" for details. + +FORMULA_MACROFILE = + # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side JavaScript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1491,11 +1622,29 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO +# With MATHJAX_VERSION it is possible to specify the MathJax version to be used. +# Note that the different versions of MathJax have different requirements with +# regards to the different settings, so it is possible that also other MathJax +# settings have to be changed when switching between the different MathJax +# versions. +# Possible values are: MathJax_2 and MathJax_3. +# The default value is: MathJax_2. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_VERSION = MathJax_2 + # When MathJax is enabled you can set the default output format to be used for -# the MathJax output. See the MathJax site (see: -# http://docs.mathjax.org/en/latest/output.html) for more details. +# the MathJax output. For more details about the output format see MathJax +# version 2 (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) and MathJax version 3 +# (see: +# http://docs.mathjax.org/en/latest/web/components/output.html). # Possible values are: HTML-CSS (which is slower, but has the best -# compatibility), NativeMML (i.e. MathML) and SVG. +# compatibility. This is the name for Mathjax version 2, for MathJax version 3 +# this will be translated into chtml), NativeMML (i.e. MathML. Only supported +# for NathJax 2. For MathJax version 3 chtml will be used instead.), chtml (This +# is the name for Mathjax version 3, for MathJax version 2 this will be +# translated into HTML-CSS) and SVG. # The default value is: HTML-CSS. # This tag requires that the tag USE_MATHJAX is set to YES. @@ -1508,22 +1657,29 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. The default value is: +# - in case of MathJax version 2: https://cdn.jsdelivr.net/npm/mathjax@2 +# - in case of MathJax version 3: https://cdn.jsdelivr.net/npm/mathjax@3 # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax # extension names that should be enabled during MathJax rendering. For example +# for MathJax version 2 (see +# https://docs.mathjax.org/en/v2.7-latest/tex.html#tex-and-latex-extensions): # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# For example for MathJax version 3 (see +# http://docs.mathjax.org/en/latest/input/tex/extensions/index.html): +# MATHJAX_EXTENSIONS = ams # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_EXTENSIONS = # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces # of code that will be used on startup of the MathJax code. See the MathJax site -# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an # example see the documentation. # This tag requires that the tag USE_MATHJAX is set to YES. @@ -1551,7 +1707,7 @@ MATHJAX_CODEFILE = SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a web server instead of a web client using Javascript. There +# implemented using a web server instead of a web client using JavaScript. There # are two flavors of web server based searching depending on the EXTERNAL_SEARCH # setting. When disabled, doxygen will generate a PHP script for searching and # an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing @@ -1570,7 +1726,8 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: +# https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1583,8 +1740,9 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and -# Searching" for details. +# Xapian (see: +# https://xapian.org/). See the section "External Indexing and Searching" for +# details. # This tag requires that the tag SEARCHENGINE is set to YES. SEARCHENGINE_URL = @@ -1635,21 +1793,35 @@ LATEX_OUTPUT = # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1665,7 +1837,7 @@ COMPACT_LATEX = NO # The default value is: a4. # This tag requires that the tag GENERATE_LATEX is set to YES. -PAPER_TYPE = a4wide +PAPER_TYPE = a4 # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names # that should be included in the LaTeX output. The package can be specified just @@ -1679,29 +1851,31 @@ PAPER_TYPE = a4wide EXTRA_PACKAGES = -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the -# generated LaTeX document. The header should contain everything until the first -# chapter. If it is left blank doxygen will generate a standard header. See -# section "Doxygen usage" for information on how to let doxygen write the -# default header to a separate file. +# The LATEX_HEADER tag can be used to specify a user-defined LaTeX header for +# the generated LaTeX document. The header should contain everything until the +# first chapter. If it is left blank doxygen will generate a standard header. It +# is highly recommended to start with a default header using +# doxygen -w latex new_header.tex new_footer.tex new_stylesheet.sty +# and then modify the file new_header.tex. See also section "Doxygen usage" for +# information on how to generate the default header that doxygen normally uses. # -# Note: Only use a user-defined header if you know what you are doing! The -# following commands have a special meaning inside the header: $title, -# $datetime, $date, $doxygenversion, $projectname, $projectnumber, -# $projectbrief, $projectlogo. Doxygen will replace $title with the empty -# string, for the replacement values of the other commands the user is referred -# to HTML_HEADER. +# Note: Only use a user-defined header if you know what you are doing! +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. The following +# commands have a special meaning inside the header (and footer): For a +# description of the possible markers and block names see the documentation. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_HEADER = -# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the -# generated LaTeX document. The footer should contain everything after the last -# chapter. If it is left blank doxygen will generate a standard footer. See +# The LATEX_FOOTER tag can be used to specify a user-defined LaTeX footer for +# the generated LaTeX document. The footer should contain everything after the +# last chapter. If it is left blank doxygen will generate a standard footer. See # LATEX_HEADER for more information on how to generate a default footer and what -# special commands can be used inside the footer. -# -# Note: Only use a user-defined footer if you know what you are doing! +# special commands can be used inside the footer. See also section "Doxygen +# usage" for information on how to generate the default footer that doxygen +# normally uses. Note: Only use a user-defined footer if you know what you are +# doing! # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_FOOTER = @@ -1734,9 +1908,11 @@ LATEX_EXTRA_FILES = PDF_HYPERLINKS = NO -# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate -# the PDF file directly from the LaTeX files. Set this option to YES, to get a -# higher quality PDF documentation. +# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as +# specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX +# files. Set this option to YES, to get a higher quality PDF documentation. +# +# See also section LATEX_CMD_NAME for selecting the engine. # The default value is: YES. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1744,8 +1920,7 @@ USE_PDFLATEX = NO # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode # command to the generated LaTeX files. This will instruct LaTeX to keep running -# if errors occur, instead of asking the user for help. This option is also used -# when generating formulas in HTML. +# if errors occur, instead of asking the user for help. # The default value is: NO. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1758,19 +1933,9 @@ LATEX_BATCHMODE = NO LATEX_HIDE_INDICES = NO -# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source -# code with syntax highlighting in the LaTeX output. -# -# Note that which sources are shown also depends on other settings such as -# SOURCE_BROWSER. -# The default value is: NO. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_SOURCE_CODE = NO - # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1784,6 +1949,14 @@ LATEX_BIB_STYLE = plain LATEX_TIMESTAMP = NO +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1823,9 +1996,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1834,22 +2007,12 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = -# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code -# with syntax highlighting in the RTF output. -# -# Note that which sources are shown also depends on other settings such as -# SOURCE_BROWSER. -# The default value is: NO. -# This tag requires that the tag GENERATE_RTF is set to YES. - -RTF_SOURCE_CODE = NO - #--------------------------------------------------------------------------- # Configuration options related to the man page output #--------------------------------------------------------------------------- @@ -1921,6 +2084,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1939,23 +2109,14 @@ GENERATE_DOCBOOK = NO DOCBOOK_OUTPUT = docbook -# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the -# program listings (including syntax highlighting and cross-referencing -# information) to the DOCBOOK output. Note that enabling this will significantly -# increase the size of the DOCBOOK output. -# The default value is: NO. -# This tag requires that the tag GENERATE_DOCBOOK is set to YES. - -DOCBOOK_PROGRAMLISTING = NO - #--------------------------------------------------------------------------- # Configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2122,34 +2283,10 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- -# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram -# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to -# NO turns the diagrams off. Note that this option also works with HAVE_DOT -# disabled, but it is recommended to install and use dot, since it yields more -# powerful graphs. -# The default value is: YES. - -CLASS_DIAGRAMS = YES - -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2168,7 +2305,7 @@ HIDE_UNDOC_RELATIONS = YES # http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent # Bell Labs. The other options in this section have no effect if this option is # set to NO -# The default value is: YES. +# The default value is: NO. HAVE_DOT = YES @@ -2206,11 +2343,14 @@ DOT_FONTSIZE = 10 DOT_FONTPATH = -# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for -# each documented class showing the direct and indirect inheritance relations. -# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. +# If the CLASS_GRAPH tag is set to YES (or GRAPH) then doxygen will generate a +# graph for each documented class showing the direct and indirect inheritance +# relations. In case HAVE_DOT is set as well dot will be used to draw the graph, +# otherwise the built-in generator will be used. If the CLASS_GRAPH tag is set +# to TEXT the direct and indirect inheritance relations will be shown as texts / +# links. +# Possible values are: NO, YES, TEXT and GRAPH. # The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. CLASS_GRAPH = YES @@ -2247,10 +2387,32 @@ UML_LOOK = NO # but if the number exceeds 15, the total amount of fields shown is limited to # 10. # Minimum value: 0, maximum value: 100, default value: 10. -# This tag requires that the tag HAVE_DOT is set to YES. +# This tag requires that the tag UML_LOOK is set to YES. UML_LIMIT_NUM_FIELDS = 10 +# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and +# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS +# tag is set to YES, doxygen will add type and arguments for attributes and +# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen +# will not generate fields with class member information in the UML graphs. The +# class diagrams will look similar to the default class diagrams but using UML +# notation for the relationships. +# Possible values are: NO, YES and NONE. +# The default value is: NO. +# This tag requires that the tag UML_LOOK is set to YES. + +DOT_UML_DETAILS = NO + +# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters +# to display on a single line. If the actual line length exceeds this threshold +# significantly it will wrapped across multiple lines. Some heuristics are apply +# to avoid ugly line breaks. +# Minimum value: 0, maximum value: 1000, default value: 17. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_WRAP_THRESHOLD = 17 + # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and # collaboration graphs will show the relations between templates and their # instances. @@ -2317,6 +2479,13 @@ GRAPHICAL_HIERARCHY = YES DIRECTORY_GRAPH = YES +# The DIR_GRAPH_MAX_DEPTH tag can be used to limit the maximum number of levels +# of child directories generated in directory dependency graphs by dot. +# Minimum value: 1, maximum value: 25, default value: 1. +# This tag requires that the tag DIRECTORY_GRAPH is set to YES. + +DIR_GRAPH_MAX_DEPTH = 1 + # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # generated by dot. For an explanation of the image formats see the section # output formats in the documentation of the dot tool (Graphviz (see: @@ -2324,9 +2493,7 @@ DIRECTORY_GRAPH = YES # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, png:cairo, png:cairo:cairo, png:cairo:gd, png:gd, -# png:gd:gd, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, gif, gif:cairo, -# gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd, png:cairo, +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, # png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and # png:gdiplus:gdiplus. # The default value is: png. @@ -2372,13 +2539,18 @@ MSCFILE_DIRS = DIAFILE_DIRS = # When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the -# path where java can find the plantuml.jar file. If left blank, it is assumed -# PlantUML is not used or called during a preprocessing step. Doxygen will -# generate a warning when it encounters a \startuml command in this case and -# will not generate output for the diagram. +# path where java can find the plantuml.jar file or to the filename of jar file +# to be used. If left blank, it is assumed PlantUML is not used or called during +# a preprocessing step. Doxygen will generate a warning when it encounters a +# \startuml command in this case and will not generate output for the diagram. PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. @@ -2432,14 +2604,18 @@ DOT_MULTI_TARGETS = NO # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page # explaining the meaning of the various boxes and arrows in the dot generated # graphs. +# Note: This tag requires that UML_LOOK isn't set, i.e. the doxygen internal +# graphical representation for inheritance and collaboration diagrams is used. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. GENERATE_LEGEND = YES -# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot +# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate # files that are used to generate the various graphs. +# +# Note: This setting is not only used for dot files but also for msc temporary +# files. # The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. DOT_CLEANUP = YES diff --git a/man/nfdump.1 b/man/nfdump.1 index 121778d6..cd854ac1 100755 --- a/man/nfdump.1 +++ b/man/nfdump.1 @@ -752,6 +752,25 @@ A filter consists of one or more primitives, which are linked together: .Dl Ar expr Sy or Ar expr .Dl Sy not Ar expr Sy and Ar (expr) .Pp +In all expressions, where a +.Ar number +is a valid argument, the +.Ar number +may be given as a normal decimal number or as a hex number prefixed by +.Sy 0x +such as +.Sy 0x22. +A decimal number may also contain a multiplication factor such as +.Ar K, M, G, T +which multiplies the number by the corresponding factor. For example +.Ar 1K, 2G etc. +.Pp +String arguments may be single or double quoted or not quoted at all, +if the string is not a reserved filter key word - +.Sy src geo CH +but +.Sy src geo 'IN' +.Pp Possible filter primitives: .Bl -tag -width "## spacer ##" -compact .It Cm @include Ar file @@ -781,7 +800,7 @@ True if source and destination IP of a record are IPv6 IPs. .It Cm proto Ar protocol True if the record protocol field matches .Ar protocol. protocol -can be a symbolic name such as +can be a string such as .Cm tcp , .Cm udp , .Cm icmp , @@ -795,7 +814,7 @@ and .Pp .It Cm tun proto Ar protocol True if the record tunnel protocol field matches -.Ar protocol. protocol may be a symbolic name or protocol number. +.Ar protocol. protocol may be a string or protocol number. .Pp .It Cm ip Ar ipaddr .It Cm src ip Ar ipaddr @@ -863,19 +882,21 @@ or .Cm dst the source or destination IP may match. .Pp -.It Cm geo Ar geoloc -.It Cm src geo Ar geocode -.It Cm dst geo Ar geocode +.It Cm geo Ar string +.It Cm src geo Ar string +.It Cm dst geo Ar string True, if the 2-letter country code resolved by geolookup of the source or destination IP address matches -.Ar geocode. +.Ar string. This filter works only, if a valid geoDB is specified. See geo location option above. The 2-letter -country code corresponds to the maxmin DB definitions. if +country code corresponds to the maxmind DB definitions. if .Cm geo is not specified with .Cm src or .Cm dst -the source or destination geo location code may match. +the source or destination geo location code may match. Please note: country codes, which match +.Nm +filter language reserved words such as IN, LT etc must be explicitly quoted to be recoginzed as string. .Pp .It Cm tunip Ar ipaddr .It Cm src tunip Ar ipaddr diff --git a/src/lib/grammar.y b/src/lib/grammar.y index 29f0a37f..0ca14475 100644 --- a/src/lib/grammar.y +++ b/src/lib/grammar.y @@ -68,8 +68,6 @@ static int InitSymbols(void); static uint32_t Get_fwd_status_id(char *status); -static char *stripWord(char *word); - static int IsMD5(char *string); static int AddGeo(uint16_t direction, char *geoStr); @@ -149,7 +147,7 @@ char yyerror_buff[256]; %token PAYLOAD CONTENT REGEX JA3 %token OBSERVATION DOMAIN POINT ID %token PF PFACTION PFREASON RULE INTERFACE -%token STRING WORD REASON +%token STRING %token NUMBER PORTNUM ICMP_TYPE ICMP_CODE %type expr %type dqual term comp acl inout @@ -364,22 +362,10 @@ term: ANY { /* this is an unconditionally true expression, as a filter applies i ); } - | FLAGS AS { - // handle special case with 'AS' takes as flags. and not AS number - uint64_t fl = 0; - fl |= 16; - fl |= 2; - $$.self = Connect_AND( - // imply flags with proto TCP - NewBlock(OffsetProto, MaskProto, ((uint64_t)IPPROTO_TCP << ShiftProto) & MaskProto, CMP_EQ, FUNC_NONE, NULL), - NewBlock(OffsetFlags, (fl << ShiftFlags) & MaskFlags, (fl << ShiftFlags) & MaskFlags, CMP_FLAGS, FUNC_NONE, NULL) - ); - } - | FLAGS STRING { uint64_t fl = 0; int cnt = 0; - size_t len = strlen($2); + size_t len = strlen($2); if ( len > 7 ) { yyerror("Too many flags"); @@ -897,7 +883,7 @@ term: ANY { /* this is an unconditionally true expression, as a filter applies i $$.self = NewBlock(0, 0, 0, CMP_FLOWLABEL, FUNC_NONE, (void *)strdup($2)); } - | ASA EVENT REASON { + | ASA EVENT STRING { #ifdef NSEL if ( strncasecmp($3,"ignore", 6) == 0) { $$.self = NewBlock(OffsetConnID, MaskFWevent, ( NSEL_EVENT_IGNORE << ShiftFWevent) & MaskFWevent, CMP_EQ, FUNC_NONE, NULL ); @@ -1159,7 +1145,7 @@ term: ANY { /* this is an unconditionally true expression, as a filter applies i #endif } - | NAT EVENT REASON { + | NAT EVENT STRING { #ifdef NSEL if ( strncasecmp($3,"invalid", 7) == 0) { $$.self = NewBlock(OffsetNATevent, MasNATevent, ( NEL_EVENT_INVALID << ShiftNATevent) & MasNATevent, CMP_EQ, FUNC_NONE, NULL ); @@ -1342,25 +1328,22 @@ term: ANY { /* this is an unconditionally true expression, as a filter applies i $$.self = NewBlock(OffsetPayload, 0, 0, CMP_PAYLOAD, FUNC_NONE, $3); } - | PAYLOAD CONTENT WORD { + | PAYLOAD CONTENT STRING { if (strlen($3)>64) { yyerror("word too long"); YYABORT; } - char *word = stripWord($3); - $$.self = NewBlock(OffsetPayload, 0, 0, CMP_PAYLOAD, FUNC_NONE, word); + $$.self = NewBlock(OffsetPayload, 0, 0, CMP_PAYLOAD, FUNC_NONE, $3); } -| PAYLOAD REGEX WORD { +| PAYLOAD REGEX STRING { if (strlen($3)>64) { yyerror("word too long"); YYABORT; } - // strip ' or " - char *word = stripWord($3); int err[2]; - srx_Context *program = srx_CreateExt(word, strlen(word), "", err, NULL, NULL); + srx_Context *program = srx_CreateExt($3, strlen($3), "", err, NULL, NULL); if ( !program ) { yyerror("failed to compile regex"); } @@ -1368,16 +1351,14 @@ term: ANY { /* this is an unconditionally true expression, as a filter applies i $$.self = NewBlock(OffsetPayload, 0, 0, CMP_REGEX, FUNC_NONE, (char *)program); } -| PAYLOAD REGEX WORD STRING{ +| PAYLOAD REGEX STRING STRING{ if (strlen($3)>64) { yyerror("word too long"); YYABORT; } - // strip ' or " - char *word = stripWord($3); int err[2]; - srx_Context *program = srx_CreateExt(word, strlen(word), $4, err, NULL, NULL); + srx_Context *program = srx_CreateExt($3, strlen($3), $4, err, NULL, NULL); if ( !program ) { yyerror("failed to compile regex"); } @@ -1489,28 +1470,6 @@ term: ANY { /* this is an unconditionally true expression, as a filter applies i } - // TODO: - // ugly quick work around to match geo location "IN" to separate from token 'in' - // fix needs redesign of the filter code - | dqual GEO IN { - int slot = AddGeo($1.direction, "IN"); - if ( slot == 0 ) - YYABORT; - $$.self = slot; - } - | dqual GEO ID { - int slot = AddGeo($1.direction, "ID"); - if ( slot == 0 ) - YYABORT; - $$.self = slot; - } - | dqual GEO LT { - int slot = AddGeo($1.direction, "LT"); - if ( slot == 0 ) - YYABORT; - $$.self = slot; - } - | dqual GEO STRING { int slot = AddGeo($1.direction, $3); if ( slot == 0 ) @@ -2585,18 +2544,6 @@ int i; } // End of Get_fwd_status_id -static char *stripWord(char *word) { - char *w = strdup(word); - - // strip ", ' and /' from begin/end of string - if ( w[0] == 0x27 || w[0] == 0x22 || w[0] == 0x2f ) w++; - size_t last = strlen(w) -1; - - if ( w[last] == 0x27 || w[last] == 0x22 || w[last] == 0x2f ) w[last] = '\0'; - - return w; -} // End of stripWord - static int IsMD5(char *string) { int i = 0; diff --git a/src/lib/scanner.l b/src/lib/scanner.l index 56cbea75..30bbed22 100755 --- a/src/lib/scanner.l +++ b/src/lib/scanner.l @@ -1,5 +1,5 @@ /* - * Copyright (c) 2012-2022, Peter Haag + * Copyright (c) 2012-2023, Peter Haag * Copyright (c) 2004-2008, SWITCH - Teleinformatikdienste fuer Lehre und Forschung * All rights reserved. * @@ -80,6 +80,8 @@ char *FilterFilename = NULL;; static void __attribute__((noreturn)) yy_fatal_error (yyconst char msg[]); +static char *stripQuotes(char *word); + // static void __attribute__((unused))yyunput (int c, char * yy_bp); %} @@ -191,10 +193,6 @@ interface { return INTERFACE;} asa { return ASA; /* NSEL filter */ } event { return EVENT; /* NEL/NSEL filter */ } -ignore|invalid|create|add|term|delete|deny { /* NSEL filter */ - yylval.s = strdup(yytext); - return REASON; - } denied { return DENIED; /* NSEL filter */ } xevent { return XEVENT; /* NSEL filter */ } xip { return NIP; /* NSEL filter */ } @@ -228,16 +226,16 @@ not|"!" { return NOT; } [ \t] { ; } [a-zA-Z0-9_:\.\-]+ { - yylval.s = strdup(yytext); + yylval.s = stripQuotes(yytext); return STRING; } -'[ -~]+' { - yylval.s = strdup(yytext); - return WORD; +[']([ -~]{-}['])*['] { + yylval.s = stripQuotes(yytext); + return STRING; } -\"[ -~]+\" { - yylval.s = strdup(yytext); - return WORD; +["]([ -~]{-}["])*["] { + yylval.s = stripQuotes(yytext); + return STRING; } \n { lineno++; } . { return yytext[0]; } @@ -328,4 +326,15 @@ int ScreenIdentString(char *string) { } // End of ScreenIdentString +static char *stripQuotes(char *string) { + char *w = strdup(string); + + // strip ", ' and /' from begin/end of string + if ( w[0] == 0x27 || w[0] == 0x22 || w[0] == 0x2f ) w++; + size_t last = strlen(w) -1; + + if ( w[last] == 0x27 || w[last] == 0x22 || w[last] == 0x2f ) w[last] = '\0'; + + return w; +} // End of stripQuotes diff --git a/src/test/nftest.c b/src/test/nftest.c index 8492a54e..cb21d61e 100644 --- a/src/test/nftest.c +++ b/src/test/nftest.c @@ -86,6 +86,7 @@ static int check_filter_block(char *filter, master_record_t *flow_record, int ex Engine = CompileFilter(filter); if (!Engine) { + printf("Compile filter: %s failed.\n", filter); exit(254); } @@ -95,7 +96,8 @@ static int check_filter_block(char *filter, master_record_t *flow_record, int ex if (ret == expect) { printf("Success: Startnode: %i Numblocks: %i Extended: %i Filter: '%s'\n", Engine->StartNode, nblocks(), Engine->Extended, filter); } else { - printf("**** FAILED **** Startnode: %i Numblocks: %i Extended: %i Filter: '%s'\n", Engine->StartNode, nblocks(), Engine->Extended, filter); + printf("**** FAILED **** Filter: '%s'\n", filter); + printf("Startnode: %i Numblocks: %i Extended: %i\n", Engine->StartNode, nblocks(), Engine->Extended); DumpEngine(Engine); printf("Expected: %i, Found: %i\n", expect, ret); printf("Record:\n"); @@ -571,6 +573,7 @@ int main(int argc, char **argv) { flow_record.tcp_flags = 63; ret = check_filter_block("flags X", &flow_record, 1); + ret = check_filter_block("not flags 'AS'", &flow_record, 0); ret = check_filter_block("not flags RF", &flow_record, 0); flow_record.tcp_flags = 3; // flags SF @@ -910,6 +913,7 @@ int main(int argc, char **argv) { flow_record.inPayload = "GET /index.html HTTP/1.1\r\n"; flow_record.inPayloadLength = strlen((char *)flow_record.inPayload); + ret = check_filter_block("payload regex 'GET'", &flow_record, 1); ret = check_filter_block("payload regex '(GET|POST)'", &flow_record, 1); ret = check_filter_block("payload regex 'HT{1,3}P/[0-9].[0-9]'", &flow_record, 1); ret = check_filter_block("payload regex \"HT{1,3}P/[0-9].[0-9]\"", &flow_record, 1);