From d2accb48e784030637f5517dfec66b13f1eab609 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sat, 20 Aug 2022 11:34:17 +0100 Subject: [PATCH] RESET -> QK_BOOT keyboard readme (#18110) --- data/templates/keyboard/readme.md | 2 +- keyboards/0xc7/61key/readme.md | 2 +- keyboards/1upkeyboards/super16v2/readme.md | 2 +- keyboards/40percentclub/polyandry/readme.md | 2 +- keyboards/a_dux/readme.md | 2 +- keyboards/acheron/apollo/readme.md | 2 +- keyboards/acheron/elongate/beta/readme.md | 2 +- keyboards/acheron/elongate/delta/readme.md | 2 +- keyboards/acheron/shark/readme.md | 4 ++-- keyboards/ada/ada1800mini/readme.md | 2 +- keyboards/ada/infinity81/readme.md | 2 +- keyboards/adm42/readme.md | 2 +- keyboards/adpenrose/kintsugi/readme.md | 2 +- keyboards/ai03/jp60/readme.md | 2 +- keyboards/akb/ogr/readme.md | 2 +- keyboards/akb/ogrn/readme.md | 2 +- keyboards/alt34/readme.md | 2 +- keyboards/amjkeyboard/amj84/readme.md | 2 +- keyboards/ano/readme.md | 2 +- keyboards/atlantis/ak81_ve/readme.md | 2 +- keyboards/atlas_65/readme.md | 2 +- keyboards/atreyu/readme.md | 2 +- keyboards/atset/at1/readme.md | 2 +- keyboards/atset/at12/readme.md | 2 +- keyboards/atset/at16/readme.md | 2 +- keyboards/atset/at3/readme.md | 2 +- keyboards/atset/at6/readme.md | 2 +- keyboards/atset/at9/readme.md | 2 +- keyboards/aves60/readme.md | 2 +- keyboards/axolstudio/foundation_gamma/readme.md | 2 +- keyboards/axolstudio/yeti/hotswap/readme.md | 2 +- keyboards/axolstudio/yeti/soldered/readme.md | 2 +- keyboards/bacca70/readme.md | 2 +- keyboards/bajjak/readme.md | 2 +- keyboards/bbrfkr/dynamis/readme.md | 2 +- keyboards/bioi/f60/readme.md | 4 ++-- keyboards/blank/blank01/readme.md | 2 +- keyboards/blaster75/readme.md | 2 +- keyboards/blockboy/ac980mini/readme.md | 2 +- keyboards/bobpad/readme.md | 4 ++-- keyboards/bpiphany/ghost_squid/readme.md | 2 +- keyboards/cablecardesigns/cypher/rev6/readme.md | 2 +- keyboards/cannonkeys/brutalv2_65/readme.md | 2 +- keyboards/cannonkeys/cloudline/readme.md | 2 +- keyboards/cannonkeys/crin/readme.md | 2 +- keyboards/cannonkeys/gentoo/readme.md | 2 +- keyboards/cannonkeys/gentoo_hs/readme.md | 2 +- keyboards/cannonkeys/hoodrowg/readme.md | 2 +- keyboards/cantor/readme.md | 2 +- keyboards/chalice/readme.md | 2 +- keyboards/chaos65/readme.md | 2 +- keyboards/charue/charon/readme.md | 2 +- keyboards/charue/sunsetter_r2/readme.md | 2 +- keyboards/cipulot/kallos/readme.md | 2 +- keyboards/cipulot/kawayo/readme.md | 2 +- keyboards/ckeys/handwire_101/readme.md | 4 ++-- keyboards/coarse/ixora/readme.md | 4 ++-- keyboards/coarse/vinta/readme.md | 4 ++-- keyboards/contender/readme.md | 2 +- keyboards/cradio/readme.md | 2 +- keyboards/creatkeebs/glacier/readme.md | 4 ++-- keyboards/creatkeebs/thera/readme.md | 4 ++-- keyboards/crin/readme.md | 2 +- keyboards/dailycraft/bat43/readme.md | 2 +- keyboards/dailycraft/claw44/readme.md | 2 +- keyboards/dailycraft/owl8/readme.md | 2 +- keyboards/dailycraft/sandbox/readme.md | 2 +- keyboards/dailycraft/stickey4/readme.md | 2 +- keyboards/dailycraft/wings42/readme.md | 2 +- keyboards/dailycraft/wings42/rev1/readme.md | 2 +- keyboards/dailycraft/wings42/rev1_extkeys/readme.md | 2 +- keyboards/dailycraft/wings42/rev2/readme.md | 2 +- keyboards/demiurge/readme.md | 2 +- keyboards/dm9records/lain/readme.md | 2 +- keyboards/doio/kb16/readme.md | 2 +- keyboards/drhigsby/packrat/readme.md | 2 +- keyboards/dtisaac/cg108/readme.md | 2 +- keyboards/dtisaac/dosa40rgb/readme.md | 2 +- keyboards/dyz/dyz40/readme.md | 2 +- keyboards/dyz/dyz_tkl/readme.md | 2 +- keyboards/dyz/selka40/readme.md | 2 +- keyboards/dztech/duo_s/readme.md | 2 +- keyboards/dztech/dz64rgb/readme.md | 2 +- keyboards/dztech/endless80/readme.md | 2 +- keyboards/eason/capsule65/readme.md | 2 +- keyboards/ekow/akira/readme.md | 2 +- keyboards/elephant42/readme.md | 2 +- keyboards/eternal_keypad/readme.md | 2 +- keyboards/eu_isolation/readme.md | 2 +- keyboards/evyd13/fin_pad/readme.md | 2 +- keyboards/evyd13/nt210/readme.md | 2 +- keyboards/evyd13/nt650/readme.md | 2 +- keyboards/eyeohdesigns/babyv/readme.md | 2 +- keyboards/eyeohdesigns/sprh/readme.md | 2 +- keyboards/eyeohdesigns/theboulevard/readme.md | 2 +- keyboards/ferris/sweep/readme.md | 2 +- keyboards/ffkeebs/puca/readme.md | 2 +- keyboards/fjlabs/tf60ansi/readme.md | 2 +- keyboards/fjlabs/tf60v2/readme.md | 2 +- keyboards/fjlabs/tf65rgbv2/readme.md | 2 +- keyboards/foxlab/time80/readme.md | 2 +- keyboards/frooastboard/walnut/readme.md | 2 +- keyboards/geonworks/frogmini/readme.md | 4 ++-- keyboards/gl516/a52gl/readme.md | 2 +- keyboards/gl516/j73gl/readme.md | 2 +- keyboards/gl516/n51gl/readme.md | 2 +- keyboards/gon/nerd60/readme.md | 2 +- keyboards/gon/nerdtkl/readme.md | 2 +- keyboards/gopolar/gg86/readme.md | 2 +- keyboards/halokeys/elemental75/readme.md | 2 +- keyboards/han60/readme.md | 2 +- keyboards/handwired/10k/readme.md | 2 +- keyboards/handwired/3dfoxc/readme.md | 2 +- keyboards/handwired/3dortho14u/readme.md | 2 +- keyboards/handwired/3dortho14u/rev1/readme.md | 2 +- keyboards/handwired/3dortho14u/rev2/readme.md | 2 +- keyboards/handwired/axon/readme.md | 4 ++-- keyboards/handwired/baredev/rev1/readme.md | 2 +- keyboards/handwired/battleship_gamepad/readme.md | 2 +- keyboards/handwired/croxsplit44/readme.md | 2 +- keyboards/handwired/dactyl_manuform/6x6/readme.md | 2 +- keyboards/handwired/elrgo_s/readme.md | 2 +- keyboards/handwired/hillside/0_1/readme.md | 2 +- keyboards/handwired/hillside/46/readme.md | 2 +- keyboards/handwired/hillside/52/readme.md | 2 +- keyboards/handwired/lagrange/readme.md | 2 +- keyboards/handwired/lemonpad/readme.md | 2 +- keyboards/handwired/m40/5x5_macropad/readme.md | 2 +- keyboards/handwired/macroboard/readme.md | 2 +- keyboards/handwired/meck_tkl/readme.md | 2 +- keyboards/handwired/snatchpad/readme.md | 2 +- keyboards/handwired/swiftrax/bumblebee/readme.md | 2 +- keyboards/handwired/swiftrax/digicarp65/readme.md | 4 ++-- keyboards/handwired/swiftrax/digicarpice/readme.md | 2 +- keyboards/handwired/swiftrax/glacier/readme.md | 2 +- keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md | 2 +- keyboards/handwired/tractyl_manuform/readme.md | 2 +- keyboards/handwired/wakizashi40/readme.md | 2 +- keyboards/hineybush/h08_ocelot/readme.md | 2 +- keyboards/hineybush/h65/readme.md | 2 +- keyboards/hineybush/h65_hotswap/readme.md | 2 +- keyboards/hineybush/ibis/readme.md | 2 +- keyboards/horizon/readme.md | 2 +- keyboards/horrortroll/chinese_pcb/black_e65/readme.md | 2 +- keyboards/horrortroll/chinese_pcb/devil68_pro/readme.md | 2 +- keyboards/horrortroll/handwired_k552/readme.md | 2 +- keyboards/horrortroll/lemon40/readme.md | 2 +- keyboards/horrortroll/paws60/readme.md | 2 +- keyboards/ibnuda/squiggle/readme.md | 2 +- keyboards/idobao/id63/readme.md | 2 +- keyboards/idobao/id67/readme.md | 2 +- keyboards/idobao/id75/v2/readme.md | 2 +- keyboards/idobao/id80/v3/readme.md | 2 +- keyboards/idobao/id87/v2/readme.md | 2 +- keyboards/idobao/id96/readme.md | 2 +- keyboards/idobao/montex/v1rgb/readme.md | 2 +- keyboards/idobao/montex/v2/readme.md | 2 +- keyboards/iron180/readme.md | 2 +- keyboards/jels/jels60/readme.md | 2 +- keyboards/jels/jels88/readme.md | 2 +- keyboards/jorne/readme.md | 2 +- keyboards/k34/readme.md | 2 +- keyboards/kapl/readme.md | 2 +- keyboards/kb58/readme.md | 2 +- keyboards/kb_elmo/vertex/readme.md | 2 +- keyboards/kbdfans/baguette66/rgb/readme.md | 2 +- keyboards/kbdfans/baguette66/soldered/readme.md | 2 +- keyboards/kbdfans/boop65/rgb/readme.md | 2 +- keyboards/kbdfans/bounce/75/hotswap/readme.md | 2 +- keyboards/kbdfans/bounce/75/soldered/readme.md | 2 +- keyboards/kbdfans/bounce/pad/readme.md | 2 +- keyboards/kbdfans/kbd19x/readme.md | 2 +- keyboards/kbdfans/kbd67/mkiirgb/v4/readme.md | 2 +- keyboards/kbdfans/kbd67/mkiirgb_iso/readme.md | 2 +- keyboards/kbdfans/kbd75hs/readme.md | 2 +- keyboards/kbdfans/kbd75rgb/readme.md | 2 +- keyboards/kbdfans/odin/rgb/readme.md | 2 +- keyboards/kbdfans/odin/soldered/readme.md | 2 +- keyboards/kbdfans/phaseone/readme.md | 2 +- keyboards/kbdfans/tiger80/readme.md | 2 +- keyboards/kbnordic/nordic60/readme.md | 2 +- keyboards/keebio/bamfk1/readme.md | 2 +- keyboards/keebio/bigswitchseat/readme.md | 2 +- keyboards/keebsforall/coarse60/readme.md | 2 +- keyboards/keebsforall/freebirdnp/lite/readme.md | 2 +- keyboards/keebsforall/freebirdnp/pro/readme.md | 2 +- keyboards/keebsforall/freebirdtkl/readme.md | 2 +- keyboards/keybee/keybee65/readme.md | 2 +- keyboards/keystonecaps/gameroyadvance/readme.md | 2 +- keyboards/keyten/aperture/readme.md | 2 +- keyboards/keyten/kt60_m/readme.md | 2 +- keyboards/kikoslab/ellora65/readme.md | 2 +- keyboards/kin80/readme.md | 2 +- keyboards/kiwikey/borderland/readme.md | 2 +- keyboards/kopibeng/mnk65/readme.md | 2 +- keyboards/kopibeng/typ65/readme.md | 2 +- keyboards/kopibeng/xt60/readme.md | 2 +- keyboards/kopibeng/xt60_singa/readme.md | 2 +- keyboards/kopibeng/xt8x/readme.md | 2 +- keyboards/kprepublic/bm60hsrgb_ec/rev1/readme.md | 2 +- keyboards/kprepublic/bm60hsrgb_ec/rev2/readme.md | 2 +- keyboards/kudox_full/readme.md | 2 +- keyboards/late9/readme.md | 2 +- keyboards/lefty/readme.md | 2 +- keyboards/lfkeyboards/mini1800/readme.md | 2 +- keyboards/lfkeyboards/mini1800/reva/readme.md | 2 +- keyboards/lfkeyboards/mini1800/revc/readme.md | 2 +- keyboards/lime/readme.md | 2 +- keyboards/linworks/fave65h/readme.md | 4 ++-- keyboards/linworks/fave84h/readme.md | 4 ++-- keyboards/linworks/fave87h/readme.md | 4 ++-- keyboards/lucid/alexa/readme.md | 2 +- keyboards/lyso1/lefishe/readme.md | 2 +- keyboards/lz/erghost/readme.md | 2 +- keyboards/machine_industries/m4_a/readme.md | 2 +- keyboards/machkeyboards/mach3/readme.md | 2 +- keyboards/makenova/omega/omega4/readme.md | 2 +- keyboards/matrix/falcon/readme.md | 2 +- keyboards/matrix/me/readme.md | 2 +- keyboards/mechanickeys/miniashen40/readme.md | 4 ++-- keyboards/mechbrewery/mb65h/readme.md | 2 +- keyboards/mechbrewery/mb65s/readme.md | 2 +- keyboards/mechlovin/foundation/readme.md | 2 +- keyboards/mechlovin/hex4b/rev2/readme.md | 2 +- keyboards/mechlovin/infinity875/readme.md | 2 +- keyboards/mechlovin/jay60/readme.md | 2 +- keyboards/mechlovin/kay60/readme.md | 2 +- keyboards/mechlovin/kay65/readme.md | 2 +- keyboards/mechlovin/olly/bb/readme.md | 2 +- keyboards/mechlovin/olly/jf/readme.md | 2 +- keyboards/mechlovin/zed60/readme.md | 2 +- keyboards/mechwild/bbs/readme.md | 2 +- keyboards/mechwild/mokulua/readme.md | 2 +- keyboards/mechwild/puckbuddy/readme.md | 2 +- keyboards/melgeek/mach80/readme.md | 2 +- keyboards/melgeek/tegic/readme.md | 2 +- keyboards/meow65/readme.md | 2 +- keyboards/merge/um80/readme.md | 2 +- keyboards/mikeneko65/readme.md | 2 +- keyboards/mincedshon/ecila/readme.md | 2 +- keyboards/mino/readme.md | 2 +- keyboards/ml/gas75/readme.md | 2 +- keyboards/mmkzoo65/readme.md | 2 +- keyboards/mntre/readme.md | 2 +- keyboards/mode/m80v1/readme.md | 2 +- keyboards/mode/m80v2/readme.md | 2 +- keyboards/monoflex60/readme.md | 2 +- keyboards/morizon/readme.md | 2 +- keyboards/ms_sculpt/readme.md | 2 +- keyboards/mss_studio/m63_rgb/readme.md | 2 +- keyboards/mss_studio/m64_rgb/readme.md | 2 +- keyboards/mwstudio/alicekk/readme.md | 2 +- keyboards/mwstudio/mw65_black/readme.md | 2 +- keyboards/mwstudio/mw65_rgb/readme.md | 2 +- keyboards/mwstudio/mw75/readme.md | 2 +- keyboards/mwstudio/mw75r2/readme.md | 2 +- keyboards/nacly/sodium42/readme.md | 2 +- keyboards/nacly/sodium50/readme.md | 2 +- keyboards/nacly/sodium62/readme.md | 2 +- keyboards/neopad/readme.md | 2 +- keyboards/neson_design/700e/readme.md | 2 +- keyboards/neson_design/n6/readme.md | 2 +- keyboards/nix_studio/n60_a/readme.md | 2 +- keyboards/noxary/valhalla/readme.md | 2 +- keyboards/nullbitsco/tidbit/readme.md | 2 +- keyboards/onekeyco/dango40/readme.md | 2 +- keyboards/papercranekeyboards/gerald65/readme.md | 2 +- keyboards/paprikman/albacore/readme.md | 2 +- keyboards/pearlboards/atlas/readme.md | 4 ++-- keyboards/pearlboards/pearl/readme.md | 4 ++-- keyboards/pearlboards/zeus/readme.md | 4 ++-- keyboards/pearlboards/zeuspad/readme.md | 4 ++-- keyboards/pegasus/readme.md | 2 +- keyboards/pierce/readme.md | 2 +- keyboards/pixelspace/capsule65i/readme.md | 2 +- keyboards/playkbtw/pk64rgb/readme.md | 2 +- keyboards/polycarbdiet/s20/readme.md | 4 ++-- keyboards/primekb/meridian/readme.md | 2 +- keyboards/primekb/meridian_rgb/readme.md | 2 +- keyboards/projectkb/signature65/readme.md | 2 +- keyboards/psuieee/pluto12/readme.md | 2 +- keyboards/qpockets/wanten/readme.md | 2 +- keyboards/rad/readme.md | 2 +- keyboards/ramonimbao/mona/v1_1/readme.md | 2 +- keyboards/ramonimbao/mona/v32a/readme.md | 2 +- keyboards/ramonimbao/wete/v2/readme.md | 2 +- keyboards/redox/readme.md | 2 +- keyboards/reviung/reviung53/readme.md | 2 +- keyboards/rgbkb/sol3/readme.md | 2 +- keyboards/ryanskidmore/rskeys100/readme.md | 2 +- keyboards/ryloo_studio/m0110/readme.md | 4 ++-- keyboards/s_ol/0xc_pad/readme.md | 2 +- keyboards/sandwich/keeb68/readme.md | 2 +- keyboards/sawnsprojects/amber80/readme.md | 2 +- keyboards/sawnsprojects/amber80/solder/readme.md | 2 +- keyboards/sawnsprojects/krush/krush60/readme.md | 2 +- keyboards/sawnsprojects/krush/krush65/hotswap/readme.md | 2 +- keyboards/sawnsprojects/krush/krush65/readme.md | 2 +- keyboards/sawnsprojects/vcl65/readme.md | 2 +- keyboards/sawnsprojects/vcl65/solder/readme.md | 2 +- keyboards/sets3n/kk980/readme.md | 2 +- keyboards/shapeshifter4060/readme.md | 2 +- keyboards/skeletonkbd/skeletonnumpad/readme.md | 2 +- keyboards/skippys_custom_pcs/rooboard65/readme.md | 2 +- keyboards/skippys_custom_pcs/roopad/readme.md | 2 +- keyboards/skme/zeno/readme.md | 2 +- keyboards/smithrune/iron165r2/readme.md | 2 +- keyboards/splitography/readme.md | 2 +- keyboards/star75/readme.md | 2 +- keyboards/stello65/beta/readme.md | 2 +- keyboards/stello65/hs_rev1/readme.md | 2 +- keyboards/stello65/sl_rev1/readme.md | 2 +- keyboards/studiokestra/bourgeau/readme.md | 2 +- keyboards/studiokestra/cascade/readme.md | 2 +- keyboards/studiokestra/galatea/readme.md | 2 +- keyboards/studiokestra/nue/readme.md | 2 +- keyboards/subrezon/la_nc/readme.md | 2 +- keyboards/synapse/readme.md | 2 +- keyboards/synthlabs/solo/readme.md | 2 +- keyboards/system76/launch_1/readme.md | 2 +- keyboards/takashicompany/center_enter/readme.md | 2 +- keyboards/takashicompany/compacx/readme.md | 2 +- keyboards/takashicompany/dogtag/readme.md | 2 +- keyboards/takashicompany/heavy_left/readme.md | 2 +- keyboards/takashicompany/minizone/readme.md | 2 +- keyboards/takashicompany/qoolee/readme.md | 2 +- keyboards/takashicompany/radialex/readme.md | 2 +- keyboards/takashicompany/spreadwriter/readme.md | 2 +- keyboards/teleport/numpad/readme.md | 2 +- keyboards/tkw/grandiceps/readme.md | 2 +- keyboards/tominabox1/adalyn/readme.md | 2 +- keyboards/tominabox1/littlefoot_lx/readme.md | 2 +- keyboards/vertex/angler2/readme.md | 2 +- keyboards/vertex/arc60/readme.md | 2 +- keyboards/viendi8l/readme.md | 2 +- keyboards/viktus/smolka/readme.md | 2 +- keyboards/wavtype/foundation/readme.md | 2 +- keyboards/wavtype/p01_ultra/readme.md | 2 +- keyboards/wekey/polaris/readme.md | 2 +- keyboards/wilba_tech/wt65_d/readme.md | 2 +- keyboards/winry/winry315/readme.md | 2 +- keyboards/wolf/kuku65/readme.md | 2 +- keyboards/wolf/ryujin/readme.md | 2 +- keyboards/wolf/sabre/readme.md | 2 +- keyboards/wolf/ts60/readme.md | 2 +- keyboards/wren/readme.md | 2 +- keyboards/yandrstudio/nz64/readme.md | 2 +- keyboards/yandrstudio/zhou65/readme.md | 2 +- keyboards/ydkb/just60/readme.md | 2 +- keyboards/ymdk/ymd21/v2/readme.md | 2 +- keyboards/yushakobo/navpad/10/readme.md | 2 +- keyboards/yushakobo/navpad/10_helix_r/readme.md | 2 +- keyboards/ziggurat/readme.md | 2 +- 353 files changed, 374 insertions(+), 374 deletions(-) diff --git a/data/templates/keyboard/readme.md b/data/templates/keyboard/readme.md index ca703c53f014..ab4f2d17ef3f 100644 --- a/data/templates/keyboard/readme.md +++ b/data/templates/keyboard/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/0xc7/61key/readme.md b/keyboards/0xc7/61key/readme.md index 356b8b07d465..0947aaa52c14 100644 --- a/keyboards/0xc7/61key/readme.md +++ b/keyboards/0xc7/61key/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/1upkeyboards/super16v2/readme.md b/keyboards/1upkeyboards/super16v2/readme.md index b2c0ca747ba6..f1b8cbaf5d6f 100644 --- a/keyboards/1upkeyboards/super16v2/readme.md +++ b/keyboards/1upkeyboards/super16v2/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/40percentclub/polyandry/readme.md b/keyboards/40percentclub/polyandry/readme.md index b6acf3cd7ffb..6162bea7a34a 100644 --- a/keyboards/40percentclub/polyandry/readme.md +++ b/keyboards/40percentclub/polyandry/readme.md @@ -48,6 +48,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key of the keyboard (top right or bottom left in horizontal configuration) * **Physical reset**: Briefly press the button on the bottom of the microcontroller or, if not present short the pin marked RST to a GND. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/a_dux/readme.md b/keyboards/a_dux/readme.md index f709542b31c5..2fca2d424f7a 100644 --- a/keyboards/a_dux/readme.md +++ b/keyboards/a_dux/readme.md @@ -41,5 +41,5 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side. * **Physical reset pins**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material. -* **Keycode in layout**: Press the key mapped to `RESET` if it is configured. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is configured. diff --git a/keyboards/acheron/apollo/readme.md b/keyboards/acheron/apollo/readme.md index 67854611dc2e..701378b64ed8 100644 --- a/keyboards/acheron/apollo/readme.md +++ b/keyboards/acheron/apollo/readme.md @@ -24,7 +24,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the physical button on the back of the PCB for at least five seconds -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout) ### Step 2: compile firmware diff --git a/keyboards/acheron/elongate/beta/readme.md b/keyboards/acheron/elongate/beta/readme.md index 8a8949fdfe45..d4298254b5fa 100755 --- a/keyboards/acheron/elongate/beta/readme.md +++ b/keyboards/acheron/elongate/beta/readme.md @@ -20,7 +20,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the front of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. ## Compile firmware diff --git a/keyboards/acheron/elongate/delta/readme.md b/keyboards/acheron/elongate/delta/readme.md index 055b02ee04d1..7300b8aa6445 100755 --- a/keyboards/acheron/elongate/delta/readme.md +++ b/keyboards/acheron/elongate/delta/readme.md @@ -20,7 +20,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (escape key at layer 2 in the default firmware) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (escape key at layer 2 in the default firmware) ## Compile firmware diff --git a/keyboards/acheron/shark/readme.md b/keyboards/acheron/shark/readme.md index d805571ebb2b..f3ae43ac4782 100644 --- a/keyboards/acheron/shark/readme.md +++ b/keyboards/acheron/shark/readme.md @@ -17,7 +17,7 @@ The DFU state in the bootloader can be accessed in 2 ways: * **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the back of the PCB -* **Keycode in layout**: press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) +* **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout) ### Release Beta: @@ -25,7 +25,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the back of the PCB, for at least five seconds -* **Keycode in layout**: press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) +* **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout) ## Compile firmware diff --git a/keyboards/ada/ada1800mini/readme.md b/keyboards/ada/ada1800mini/readme.md index ad323114a6ac..561dbd99a976 100644 --- a/keyboards/ada/ada1800mini/readme.md +++ b/keyboards/ada/ada1800mini/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/ada/infinity81/readme.md b/keyboards/ada/infinity81/readme.md index a134379ce5c5..f44d762cb7a1 100644 --- a/keyboards/ada/infinity81/readme.md +++ b/keyboards/ada/infinity81/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/adm42/readme.md b/keyboards/adm42/readme.md index 1affc1162847..a767e8a70b8e 100644 --- a/keyboards/adm42/readme.md +++ b/keyboards/adm42/readme.md @@ -22,6 +22,6 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB diff --git a/keyboards/adpenrose/kintsugi/readme.md b/keyboards/adpenrose/kintsugi/readme.md index 2aa402543e56..708dc16699b2 100644 --- a/keyboards/adpenrose/kintsugi/readme.md +++ b/keyboards/adpenrose/kintsugi/readme.md @@ -34,4 +34,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the front of the Elite-C microcontroller _**before soldering**_ it to the PCB- some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/ai03/jp60/readme.md b/keyboards/ai03/jp60/readme.md index 25a3b164136c..d5dbd669fdc6 100644 --- a/keyboards/ai03/jp60/readme.md +++ b/keyboards/ai03/jp60/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/akb/ogr/readme.md b/keyboards/akb/ogr/readme.md index 667963bce0c6..e9b01e958c7d 100644 --- a/keyboards/akb/ogr/readme.md +++ b/keyboards/akb/ogr/readme.md @@ -26,4 +26,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/akb/ogrn/readme.md b/keyboards/akb/ogrn/readme.md index 16d60538c729..fc55da54f8d1 100644 --- a/keyboards/akb/ogrn/readme.md +++ b/keyboards/akb/ogrn/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/alt34/readme.md b/keyboards/alt34/readme.md index 14c1e28c7a19..59e8365c51e2 100644 --- a/keyboards/alt34/readme.md +++ b/keyboards/alt34/readme.md @@ -24,7 +24,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset jumper**: Briefly short the pads just below the TRRS connector on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Latest updates and information for alt34 is found at https://gitlab.com/altosys/alt34 diff --git a/keyboards/amjkeyboard/amj84/readme.md b/keyboards/amjkeyboard/amj84/readme.md index c0df110eb092..d1cc03a7f4d6 100644 --- a/keyboards/amjkeyboard/amj84/readme.md +++ b/keyboards/amjkeyboard/amj84/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/ano/readme.md b/keyboards/ano/readme.md index cc879d77b5a9..594d4bc69cc1 100644 --- a/keyboards/ano/readme.md +++ b/keyboards/ano/readme.md @@ -17,4 +17,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * Physical reset button: Briefly press the button on the back of the PCB - or short reset and ground pins -* Keycode in layout: Press the key mapped to `RESET`. By default this is done by pressing RALT to access second layer and pressing rotary encoder down. \ No newline at end of file +* Keycode in layout: Press the key mapped to `QK_BOOT`. By default this is done by pressing RALT to access second layer and pressing rotary encoder down. \ No newline at end of file diff --git a/keyboards/atlantis/ak81_ve/readme.md b/keyboards/atlantis/ak81_ve/readme.md index d9a6f9627c2d..ab1fee5a487b 100644 --- a/keyboards/atlantis/ak81_ve/readme.md +++ b/keyboards/atlantis/ak81_ve/readme.md @@ -17,7 +17,7 @@ Make example for this keyboard (after setting up your build environment): Enter the bootloader in 2 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * **Physical reset pins**: Briefly short the reset pins using tweezers, a paperclip, or any other conductive material. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/atlas_65/readme.md b/keyboards/atlas_65/readme.md index 40eebba6f422..398024cbf07a 100644 --- a/keyboards/atlas_65/readme.md +++ b/keyboards/atlas_65/readme.md @@ -23,4 +23,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/atreyu/readme.md b/keyboards/atreyu/readme.md index 877e8788d21b..1de288ea88a2 100644 --- a/keyboards/atreyu/readme.md +++ b/keyboards/atreyu/readme.md @@ -22,7 +22,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## More information diff --git a/keyboards/atset/at1/readme.md b/keyboards/atset/at1/readme.md index 90a56dba309a..330c1b2ff8ee 100644 --- a/keyboards/atset/at1/readme.md +++ b/keyboards/atset/at1/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available \ No newline at end of file diff --git a/keyboards/atset/at12/readme.md b/keyboards/atset/at12/readme.md index 2ddd93046d31..6760e33ab500 100644 --- a/keyboards/atset/at12/readme.md +++ b/keyboards/atset/at12/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available \ No newline at end of file diff --git a/keyboards/atset/at16/readme.md b/keyboards/atset/at16/readme.md index 6667a1a18746..00dba767dce7 100644 --- a/keyboards/atset/at16/readme.md +++ b/keyboards/atset/at16/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/atset/at3/readme.md b/keyboards/atset/at3/readme.md index f33bda8df3ba..755169c5d68b 100644 --- a/keyboards/atset/at3/readme.md +++ b/keyboards/atset/at3/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available \ No newline at end of file diff --git a/keyboards/atset/at6/readme.md b/keyboards/atset/at6/readme.md index f5ec383530ae..84abbf87a51a 100644 --- a/keyboards/atset/at6/readme.md +++ b/keyboards/atset/at6/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/atset/at9/readme.md b/keyboards/atset/at9/readme.md index d59b1e2f4dc8..d1d38ba6c6b2 100644 --- a/keyboards/atset/at9/readme.md +++ b/keyboards/atset/at9/readme.md @@ -21,4 +21,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/aves60/readme.md b/keyboards/aves60/readme.md index 5a96d2b2eb14..049d2d99d8d8 100644 --- a/keyboards/aves60/readme.md +++ b/keyboards/aves60/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the space bar and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/axolstudio/foundation_gamma/readme.md b/keyboards/axolstudio/foundation_gamma/readme.md index 522ddd16c6fe..5736a0c1d39e 100644 --- a/keyboards/axolstudio/foundation_gamma/readme.md +++ b/keyboards/axolstudio/foundation_gamma/readme.md @@ -22,4 +22,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * **Bootmagic reset**: Hold down the top left key and plug in the keyboard * **Physical reset button**: Briefly press the button labeled "SW1" on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/axolstudio/yeti/hotswap/readme.md b/keyboards/axolstudio/yeti/hotswap/readme.md index 79fad346f346..4421847705b4 100644 --- a/keyboards/axolstudio/yeti/hotswap/readme.md +++ b/keyboards/axolstudio/yeti/hotswap/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/axolstudio/yeti/soldered/readme.md b/keyboards/axolstudio/yeti/soldered/readme.md index 78ca4d5deb6e..429cc7ce9a45 100644 --- a/keyboards/axolstudio/yeti/soldered/readme.md +++ b/keyboards/axolstudio/yeti/soldered/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/bacca70/readme.md b/keyboards/bacca70/readme.md index 2141138b8f6a..8c79edd4945f 100644 --- a/keyboards/bacca70/readme.md +++ b/keyboards/bacca70/readme.md @@ -14,7 +14,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key (Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB. The button is next to the MCU. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. For the default keymap it is on the right alt key on the second layer. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. For the default keymap it is on the right alt key on the second layer. ## Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/bajjak/readme.md b/keyboards/bajjak/readme.md index 7e86d0243d6d..4b05c74f0ad7 100644 --- a/keyboards/bajjak/readme.md +++ b/keyboards/bajjak/readme.md @@ -18,6 +18,6 @@ Flashing example for this keyboard: Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bbrfkr/dynamis/readme.md b/keyboards/bbrfkr/dynamis/readme.md index 6806819bb1a6..1db398f08be7 100644 --- a/keyboards/bbrfkr/dynamis/readme.md +++ b/keyboards/bbrfkr/dynamis/readme.md @@ -14,7 +14,7 @@ Gasket mounted 65% row staggered keyboard integrated a trackball Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## build and flash firmware diff --git a/keyboards/bioi/f60/readme.md b/keyboards/bioi/f60/readme.md index 6a120acdedc9..9b5c8e859115 100644 --- a/keyboards/bioi/f60/readme.md +++ b/keyboards/bioi/f60/readme.md @@ -21,5 +21,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader * **Bootmagic reset**: Hold down the top left key (ESC) and plug in the keyboard -* **Physical reset button**: Short the two small pads labeled "RESET" the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Physical reset button**: Short the two small pads labeled "QK_BOOT" the back of the PCB +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/blank/blank01/readme.md b/keyboards/blank/blank01/readme.md index 059bb2c8dc5d..66c2fa8ded86 100644 --- a/keyboards/blank/blank01/readme.md +++ b/keyboards/blank/blank01/readme.md @@ -23,4 +23,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the front of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/blaster75/readme.md b/keyboards/blaster75/readme.md index 1a03ec5a9f77..851db670adeb 100644 --- a/keyboards/blaster75/readme.md +++ b/keyboards/blaster75/readme.md @@ -18,7 +18,7 @@ We strongly recommend this method. If the PCB is not soldered with switches at t to short the (0,0) position key ("ESC" in our PCB) while plugging the USB in. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/blockboy/ac980mini/readme.md b/keyboards/blockboy/ac980mini/readme.md index 662f7b79a867..6eef032b7ffa 100644 --- a/keyboards/blockboy/ac980mini/readme.md +++ b/keyboards/blockboy/ac980mini/readme.md @@ -26,4 +26,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/bobpad/readme.md b/keyboards/bobpad/readme.md index 776ef58e4705..75e6e032025d 100644 --- a/keyboards/bobpad/readme.md +++ b/keyboards/bobpad/readme.md @@ -19,7 +19,7 @@ Flashing example for this keyboard: ## Bootloader Enter the bootloader in 3 ways: -* **Physical reset button**: Briefly short the pad connected to RESET and GND on the back -* **Keycode in layout**: Press the key mapped to `RESET`, this is the recommened method +* **Physical reset button**: Briefly short the pad connected to QK_BOOT and GND on the back +* **Keycode in layout**: Press the key mapped to `QK_BOOT`, this is the recommened method See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bpiphany/ghost_squid/readme.md b/keyboards/bpiphany/ghost_squid/readme.md index ab39e0f72526..2b2e838cbcf0 100644 --- a/keyboards/bpiphany/ghost_squid/readme.md +++ b/keyboards/bpiphany/ghost_squid/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/cablecardesigns/cypher/rev6/readme.md b/keyboards/cablecardesigns/cypher/rev6/readme.md index 13016e86a12b..65e87175cf7c 100644 --- a/keyboards/cablecardesigns/cypher/rev6/readme.md +++ b/keyboards/cablecardesigns/cypher/rev6/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: There are 2 holes underneath the spacebar position that if shorted will enter bootloader -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cannonkeys/brutalv2_65/readme.md b/keyboards/cannonkeys/brutalv2_65/readme.md index fe09c9ecec09..52d0649ce186 100644 --- a/keyboards/cannonkeys/brutalv2_65/readme.md +++ b/keyboards/cannonkeys/brutalv2_65/readme.md @@ -17,4 +17,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cannonkeys/cloudline/readme.md b/keyboards/cannonkeys/cloudline/readme.md index ddd15a05a529..af619fe6a5f9 100644 --- a/keyboards/cannonkeys/cloudline/readme.md +++ b/keyboards/cannonkeys/cloudline/readme.md @@ -17,4 +17,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cannonkeys/crin/readme.md b/keyboards/cannonkeys/crin/readme.md index 2da8bd6bcc9b..d81550d02307 100644 --- a/keyboards/cannonkeys/crin/readme.md +++ b/keyboards/cannonkeys/crin/readme.md @@ -15,4 +15,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cannonkeys/gentoo/readme.md b/keyboards/cannonkeys/gentoo/readme.md index 1b852a614b3a..51e7eb96f3b4 100644 --- a/keyboards/cannonkeys/gentoo/readme.md +++ b/keyboards/cannonkeys/gentoo/readme.md @@ -17,4 +17,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cannonkeys/gentoo_hs/readme.md b/keyboards/cannonkeys/gentoo_hs/readme.md index fa99daec2f8f..8c3de2effa8c 100644 --- a/keyboards/cannonkeys/gentoo_hs/readme.md +++ b/keyboards/cannonkeys/gentoo_hs/readme.md @@ -17,4 +17,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cannonkeys/hoodrowg/readme.md b/keyboards/cannonkeys/hoodrowg/readme.md index e5baab539ad7..67265e05af12 100644 --- a/keyboards/cannonkeys/hoodrowg/readme.md +++ b/keyboards/cannonkeys/hoodrowg/readme.md @@ -15,7 +15,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cantor/readme.md b/keyboards/cantor/readme.md index 90045eb2beeb..9a45d7befc7b 100644 --- a/keyboards/cantor/readme.md +++ b/keyboards/cantor/readme.md @@ -27,4 +27,4 @@ Enter the bootloader in 3 ways: * Press and hold the BOOT0 button. * Press and release the NRST button. * Release the BOOT0 button. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/chalice/readme.md b/keyboards/chalice/readme.md index ebfaa3cbd11f..2c076e5afc27 100644 --- a/keyboards/chalice/readme.md +++ b/keyboards/chalice/readme.md @@ -20,6 +20,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down Escape and plug in the keyboard. * **Physical reset button**: Briefly press the reset button below the pro-micro. -* **Keycode in layout**: The `RESET` key can be found by holding `FUNC` in between the space bars and pressing `ESC`. +* **Keycode in layout**: The `QK_BOOT` key can be found by holding `FUNC` in between the space bars and pressing `ESC`. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/chaos65/readme.md b/keyboards/chaos65/readme.md index 4337ecf90a53..62d6e4a40e47 100644 --- a/keyboards/chaos65/readme.md +++ b/keyboards/chaos65/readme.md @@ -22,4 +22,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * **Bootmagic reset**: Hold down the top left key and plug in the keyboard * **Physical reset button**: Briefly press the button labeled "Reset" on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/charue/charon/readme.md b/keyboards/charue/charon/readme.md index 1732d8a018c3..9c2afd641bf0 100644 --- a/keyboards/charue/charon/readme.md +++ b/keyboards/charue/charon/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/charue/sunsetter_r2/readme.md b/keyboards/charue/sunsetter_r2/readme.md index 8bfa046a9360..d5e34beec91e 100644 --- a/keyboards/charue/sunsetter_r2/readme.md +++ b/keyboards/charue/sunsetter_r2/readme.md @@ -28,4 +28,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cipulot/kallos/readme.md b/keyboards/cipulot/kallos/readme.md index 16921fbb42db..6d1341735c1b 100644 --- a/keyboards/cipulot/kallos/readme.md +++ b/keyboards/cipulot/kallos/readme.md @@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * **Bootmagic reset**: Hold down the top left key and plug in the keyboard * **Physical reset button**: Briefly short the pads labeled "Reset" on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cipulot/kawayo/readme.md b/keyboards/cipulot/kawayo/readme.md index 99c26c6f8c34..53e01faaa5e9 100644 --- a/keyboards/cipulot/kawayo/readme.md +++ b/keyboards/cipulot/kawayo/readme.md @@ -26,4 +26,4 @@ Enter the bootloader in 2 ways: * **Physical reset button**: Power up the board while having the `Reset/Boot0` pad shorted. -* **Keycode in layout**: Press the `GRV` key on layer 1 which is mapped to `RESET` +* **Keycode in layout**: Press the `GRV` key on layer 1 which is mapped to `QK_BOOT` diff --git a/keyboards/ckeys/handwire_101/readme.md b/keyboards/ckeys/handwire_101/readme.md index cf20dab60b75..281fbddc7cd1 100755 --- a/keyboards/ckeys/handwire_101/readme.md +++ b/keyboards/ckeys/handwire_101/readme.md @@ -139,7 +139,7 @@ This layer is not currently working but has been left as an example of how to wr ``` /* ADMIN * ,-----------------------------------------. - * | RESET | | | X | + * | QK_BOOT | | | X | * |------------+-----+-----------+----------| * |ABOUT CKEYS | | | | * |------------+-----+-----------+----------| @@ -150,7 +150,7 @@ This layer is not currently working but has been left as an example of how to wr */ ``` -The most important key in this layer is the `RESET` switch. Use it to flash new firmware. It does the same thing as the hardware button on the Proton C. But since you soldered the Proton C with the reset button facing towards the keys, the only way to reach it is to de-solder wires. The reset switch solves this. Program a reset switch into all of your future keyboards. +The most important key in this layer is the `QK_BOOT` switch. Use it to flash new firmware. It does the same thing as the hardware button on the Proton C. But since you soldered the Proton C with the reset button facing towards the keys, the only way to reach it is to de-solder wires. The reset switch solves this. Program a reset switch into all of your future keyboards. The `ABOUT CKEYS` is another example of using a macro. It will type out a few sentences about cKeys. diff --git a/keyboards/coarse/ixora/readme.md b/keyboards/coarse/ixora/readme.md index a094bbd5e7dd..824e167ecdaf 100644 --- a/keyboards/coarse/ixora/readme.md +++ b/keyboards/coarse/ixora/readme.md @@ -18,5 +18,5 @@ See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) #### Developer's Note -STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `RESET` keycode nor using bootmagic or bootmagic lite. -The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `RESET` keycode). +STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `QK_BOOT` keycode nor using bootmagic or bootmagic lite. +The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `QK_BOOT` keycode). diff --git a/keyboards/coarse/vinta/readme.md b/keyboards/coarse/vinta/readme.md index 42291cd1fe49..3c87101c4612 100644 --- a/keyboards/coarse/vinta/readme.md +++ b/keyboards/coarse/vinta/readme.md @@ -18,5 +18,5 @@ See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) #### Developer's Note -STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `RESET` keycode nor using bootmagic or bootmagic lite. -The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `RESET` keycode). +STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `QK_BOOT` keycode nor using bootmagic or bootmagic lite. +The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `QK_BOOT` keycode). diff --git a/keyboards/contender/readme.md b/keyboards/contender/readme.md index 281ad4dabf62..8a3fe08eafbf 100644 --- a/keyboards/contender/readme.md +++ b/keyboards/contender/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cradio/readme.md b/keyboards/cradio/readme.md index 7f3cef0969f4..0efbd88c188f 100644 --- a/keyboards/cradio/readme.md +++ b/keyboards/cradio/readme.md @@ -24,7 +24,7 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: -* **Keycode in layout**: Press the key mapped to `RESET` if it is configured. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is configured. * **Physical reset button**: Briefly press the reset button soldered on the PCB. * **Bootmagic reset**: Hold down the top left key on the left half (or the top right key on the right half) and plug in the controller on that side. diff --git a/keyboards/creatkeebs/glacier/readme.md b/keyboards/creatkeebs/glacier/readme.md index 6901f93b277d..0a3862986322 100644 --- a/keyboards/creatkeebs/glacier/readme.md +++ b/keyboards/creatkeebs/glacier/readme.md @@ -16,8 +16,8 @@ A 80% keyboard Enter the bootloader in 2 ways: -* Physical reset button: Press the `RESET` button on the back of the PCB. -* Keycode in layout: Press the key mapped to `RESET` if it is available. +* Physical reset button: Press the `QK_BOOT` button on the back of the PCB. +* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available. ### Building the Firmware Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/creatkeebs/thera/readme.md b/keyboards/creatkeebs/thera/readme.md index a03f9c184e8e..2f78a154fdf6 100644 --- a/keyboards/creatkeebs/thera/readme.md +++ b/keyboards/creatkeebs/thera/readme.md @@ -18,8 +18,8 @@ A 75% keyboard Enter the bootloader in 2 ways: -* Physical reset button: Press the `RESET` button on the back of the PCB. -* Keycode in layout: Press the key mapped to `RESET` if it is available. +* Physical reset button: Press the `QK_BOOT` button on the back of the PCB. +* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available. ### Building the Firmware Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/crin/readme.md b/keyboards/crin/readme.md index 1912cee1f78e..bc39ca6ac8e9 100644 --- a/keyboards/crin/readme.md +++ b/keyboards/crin/readme.md @@ -17,7 +17,7 @@ Flashing example for this keyboard: To reset the board into bootloader mode, do one of the following: * Hold Esc while plugging the PCB in, if Bootmagic Lite is enabled (also erases persistent settings). -* Press the RESET keycode, if programmed on the keymap (Fn+R by default). +* Press the `QK_BOOT` keycode, if programmed on the keymap (Fn+R by default). * Slide the switch just below the reset button to the left and press the reset button. * Please note that you must slide it back to the right for the PCB to boot QMK again. diff --git a/keyboards/dailycraft/bat43/readme.md b/keyboards/dailycraft/bat43/readme.md index 6b58aa5ca3b3..033186229018 100644 --- a/keyboards/dailycraft/bat43/readme.md +++ b/keyboards/dailycraft/bat43/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dailycraft/claw44/readme.md b/keyboards/dailycraft/claw44/readme.md index e533bd7c82ff..9ff970fd7262 100644 --- a/keyboards/dailycraft/claw44/readme.md +++ b/keyboards/dailycraft/claw44/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dailycraft/owl8/readme.md b/keyboards/dailycraft/owl8/readme.md index c7fab17476d6..eccd990c605d 100644 --- a/keyboards/dailycraft/owl8/readme.md +++ b/keyboards/dailycraft/owl8/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dailycraft/sandbox/readme.md b/keyboards/dailycraft/sandbox/readme.md index 790deba95fce..b7921566a3d1 100644 --- a/keyboards/dailycraft/sandbox/readme.md +++ b/keyboards/dailycraft/sandbox/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dailycraft/stickey4/readme.md b/keyboards/dailycraft/stickey4/readme.md index e365407f82b0..35938c999f34 100644 --- a/keyboards/dailycraft/stickey4/readme.md +++ b/keyboards/dailycraft/stickey4/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dailycraft/wings42/readme.md b/keyboards/dailycraft/wings42/readme.md index c91965339717..fa49ddfb3f58 100644 --- a/keyboards/dailycraft/wings42/readme.md +++ b/keyboards/dailycraft/wings42/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dailycraft/wings42/rev1/readme.md b/keyboards/dailycraft/wings42/rev1/readme.md index 959052c41d5e..2f3401a16b59 100644 --- a/keyboards/dailycraft/wings42/rev1/readme.md +++ b/keyboards/dailycraft/wings42/rev1/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dailycraft/wings42/rev1_extkeys/readme.md b/keyboards/dailycraft/wings42/rev1_extkeys/readme.md index 4a34063ad4cf..8ca8c140f786 100644 --- a/keyboards/dailycraft/wings42/rev1_extkeys/readme.md +++ b/keyboards/dailycraft/wings42/rev1_extkeys/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dailycraft/wings42/rev2/readme.md b/keyboards/dailycraft/wings42/rev2/readme.md index c91965339717..fa49ddfb3f58 100644 --- a/keyboards/dailycraft/wings42/rev2/readme.md +++ b/keyboards/dailycraft/wings42/rev2/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/demiurge/readme.md b/keyboards/demiurge/readme.md index 6e7845c8b4b7..b64d36f27492 100644 --- a/keyboards/demiurge/readme.md +++ b/keyboards/demiurge/readme.md @@ -19,6 +19,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/dm9records/lain/readme.md b/keyboards/dm9records/lain/readme.md index 6eb216af6162..4105c29371a5 100644 --- a/keyboards/dm9records/lain/readme.md +++ b/keyboards/dm9records/lain/readme.md @@ -29,4 +29,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/doio/kb16/readme.md b/keyboards/doio/kb16/readme.md index e83bfa67db9a..8667da41d56a 100644 --- a/keyboards/doio/kb16/readme.md +++ b/keyboards/doio/kb16/readme.md @@ -23,4 +23,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (1! key) and plug in the keyboard * **Physical reset button**: Short press the button under Spacebar keycap to enter the Bootloader and flash the firmware -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/drhigsby/packrat/readme.md b/keyboards/drhigsby/packrat/readme.md index 98b12543dcf0..f11feeec9527 100644 --- a/keyboards/drhigsby/packrat/readme.md +++ b/keyboards/drhigsby/packrat/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dtisaac/cg108/readme.md b/keyboards/dtisaac/cg108/readme.md index 3bf38f768937..c454e0b877e7 100644 --- a/keyboards/dtisaac/cg108/readme.md +++ b/keyboards/dtisaac/cg108/readme.md @@ -23,4 +23,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dtisaac/dosa40rgb/readme.md b/keyboards/dtisaac/dosa40rgb/readme.md index a2995a5c0f76..30e549aa6ec8 100644 --- a/keyboards/dtisaac/dosa40rgb/readme.md +++ b/keyboards/dtisaac/dosa40rgb/readme.md @@ -23,4 +23,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dyz/dyz40/readme.md b/keyboards/dyz/dyz40/readme.md index f73c4ef46c42..537ccdda45dd 100644 --- a/keyboards/dyz/dyz40/readme.md +++ b/keyboards/dyz/dyz40/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: - **Bootmagic reset**: Hold the `Esc` key while plugging in the USB cable - **Physical reset button**: Briefly short the pins under the Enter key -- **Keycode in layout**: Press the key mapped to `RESET` if it is available +- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dyz/dyz_tkl/readme.md b/keyboards/dyz/dyz_tkl/readme.md index 2de8105d2437..a15eb48e2e42 100644 --- a/keyboards/dyz/dyz_tkl/readme.md +++ b/keyboards/dyz/dyz_tkl/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: - **Bootmagic reset**: Hold the `Esc` key while plugging in the USB cable - **Physical reset button**: Briefly short the pins under the spacebar key -- **Keycode in layout**: Press the key mapped to `RESET` if it is available +- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dyz/selka40/readme.md b/keyboards/dyz/selka40/readme.md index 6232d18a1020..2117e248bc9e 100644 --- a/keyboards/dyz/selka40/readme.md +++ b/keyboards/dyz/selka40/readme.md @@ -23,4 +23,4 @@ Enter the bootloader in 3 ways: - **Bootmagic reset**: Hold the `Esc` key while plugging in the USB cable - **Physical reset button**: Briefly press the button on the back of the PCB -- **Keycode in layout**: Press the key mapped to `RESET` if it is available +- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dztech/duo_s/readme.md b/keyboards/dztech/duo_s/readme.md index 7346663854d8..8bf5fa73c1f3 100644 --- a/keyboards/dztech/duo_s/readme.md +++ b/keyboards/dztech/duo_s/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: hold the button on the back of the PCB during plug in cable. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/dztech/dz64rgb/readme.md b/keyboards/dztech/dz64rgb/readme.md index 132a1710d770..cf1ff7b11030 100644 --- a/keyboards/dztech/dz64rgb/readme.md +++ b/keyboards/dztech/dz64rgb/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/dztech/endless80/readme.md b/keyboards/dztech/endless80/readme.md index 58238afefee4..18b813566cdd 100644 --- a/keyboards/dztech/endless80/readme.md +++ b/keyboards/dztech/endless80/readme.md @@ -15,4 +15,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down esc in the keyboard then replug * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` \ No newline at end of file diff --git a/keyboards/eason/capsule65/readme.md b/keyboards/eason/capsule65/readme.md index 87576e34fa06..5692cac027dc 100644 --- a/keyboards/eason/capsule65/readme.md +++ b/keyboards/eason/capsule65/readme.md @@ -14,4 +14,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down esc in the keyboard then replug * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` +* **Keycode in layout**: Press the key mapped to `QK_BOOT` diff --git a/keyboards/ekow/akira/readme.md b/keyboards/ekow/akira/readme.md index e1a0c9036602..62ec95acf411 100644 --- a/keyboards/ekow/akira/readme.md +++ b/keyboards/ekow/akira/readme.md @@ -20,5 +20,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the Buttom on the back of the PCB, the board will enter the dfu-mode, no extra pads need to short. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/elephant42/readme.md b/keyboards/elephant42/readme.md index 855ccda1e0a2..e6ceb5b17f49 100644 --- a/keyboards/elephant42/readme.md +++ b/keyboards/elephant42/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/eternal_keypad/readme.md b/keyboards/eternal_keypad/readme.md index 196f51b31d85..05c13bc5160e 100644 --- a/keyboards/eternal_keypad/readme.md +++ b/keyboards/eternal_keypad/readme.md @@ -23,5 +23,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,1) in the matrix (the top left key or Escape) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (activated by holding the lower right key and tapping the lower left key) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (activated by holding the lower right key and tapping the lower left key) * **Physical reset button**: Briefly sort the pads labeled "RST" and "GND" on the micro-controller diff --git a/keyboards/eu_isolation/readme.md b/keyboards/eu_isolation/readme.md index 711981ff02bc..c1272ea6a993 100644 --- a/keyboards/eu_isolation/readme.md +++ b/keyboards/eu_isolation/readme.md @@ -16,7 +16,7 @@ enters from you collection of keyboard kits. Enter the bootloader in 3 ways: * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## Information diff --git a/keyboards/evyd13/fin_pad/readme.md b/keyboards/evyd13/fin_pad/readme.md index 4802caadecdb..bfeec8e44924 100644 --- a/keyboards/evyd13/fin_pad/readme.md +++ b/keyboards/evyd13/fin_pad/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/evyd13/nt210/readme.md b/keyboards/evyd13/nt210/readme.md index b6b7bc940eb5..3a7117bcd159 100644 --- a/keyboards/evyd13/nt210/readme.md +++ b/keyboards/evyd13/nt210/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/evyd13/nt650/readme.md b/keyboards/evyd13/nt650/readme.md index b4684a94b645..ba2a967f3294 100644 --- a/keyboards/evyd13/nt650/readme.md +++ b/keyboards/evyd13/nt650/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/eyeohdesigns/babyv/readme.md b/keyboards/eyeohdesigns/babyv/readme.md index 6a367f376d0d..b3b179aea742 100644 --- a/keyboards/eyeohdesigns/babyv/readme.md +++ b/keyboards/eyeohdesigns/babyv/readme.md @@ -16,6 +16,6 @@ Flashing example for this keyboard: make eyeohdesigns/babyv:default:flash -To enter the bootloader, either depress the reset button on the back of the PCB, or use the 'RESET' keycode found on the function layer. +To enter the bootloader, either depress the reset button on the back of the PCB, or use the `QK_BOOT` keycode found on the function layer. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/eyeohdesigns/sprh/readme.md b/keyboards/eyeohdesigns/sprh/readme.md index 59c5bce2c7e7..e4b7ced60887 100644 --- a/keyboards/eyeohdesigns/sprh/readme.md +++ b/keyboards/eyeohdesigns/sprh/readme.md @@ -16,6 +16,6 @@ Flashing example for this keyboard: make eyeohdesigns/sprh:default:flash -To enter the bootloader, either depress the reset button on the back of the PCB, or use the 'RESET' keycode found on the function layer. +To enter the bootloader, either depress the reset button on the back of the PCB, or use the `QK_BOOT` keycode found on the function layer. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/eyeohdesigns/theboulevard/readme.md b/keyboards/eyeohdesigns/theboulevard/readme.md index c1f29becb772..bfe330ab2173 100644 --- a/keyboards/eyeohdesigns/theboulevard/readme.md +++ b/keyboards/eyeohdesigns/theboulevard/readme.md @@ -16,6 +16,6 @@ Flashing example for this keyboard: make eyeohdesigns/theboulevard:default:flash -To enter the bootloader, either depress the reset button on the back of the PCB, or use the 'RESET' keycode found on the function layer. +To enter the bootloader, either depress the reset button on the back of the PCB, or use the `QK_BOOT` keycode found on the function layer. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/ferris/sweep/readme.md b/keyboards/ferris/sweep/readme.md index 332ab2c790ae..3fe690ab91f4 100644 --- a/keyboards/ferris/sweep/readme.md +++ b/keyboards/ferris/sweep/readme.md @@ -37,7 +37,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key on the left half (or the top right key on the right half) and plug in the controller on that side. * **Physical reset button**: Briefly press the reset button soldered on the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is configured. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is configured. ## Swapped Pins diff --git a/keyboards/ffkeebs/puca/readme.md b/keyboards/ffkeebs/puca/readme.md index ca4e0f93f939..bfd814e2b655 100644 --- a/keyboards/ffkeebs/puca/readme.md +++ b/keyboards/ffkeebs/puca/readme.md @@ -10,7 +10,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the encoder) * **Physical reset button**: Briefly press the button on the front of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/fjlabs/tf60ansi/readme.md b/keyboards/fjlabs/tf60ansi/readme.md index 29cbad3fca64..274db0c27ebf 100644 --- a/keyboards/fjlabs/tf60ansi/readme.md +++ b/keyboards/fjlabs/tf60ansi/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available \ No newline at end of file diff --git a/keyboards/fjlabs/tf60v2/readme.md b/keyboards/fjlabs/tf60v2/readme.md index 22e624e68fc3..73b1473e2ae4 100644 --- a/keyboards/fjlabs/tf60v2/readme.md +++ b/keyboards/fjlabs/tf60v2/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available \ No newline at end of file diff --git a/keyboards/fjlabs/tf65rgbv2/readme.md b/keyboards/fjlabs/tf65rgbv2/readme.md index 0aea9ef8fd6e..b46c40cbfe78 100644 --- a/keyboards/fjlabs/tf65rgbv2/readme.md +++ b/keyboards/fjlabs/tf65rgbv2/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available \ No newline at end of file diff --git a/keyboards/foxlab/time80/readme.md b/keyboards/foxlab/time80/readme.md index 66fd66b4b6d4..58ad56040082 100644 --- a/keyboards/foxlab/time80/readme.md +++ b/keyboards/foxlab/time80/readme.md @@ -21,7 +21,7 @@ Flashing example for this keyboard ([after setting up the bootloadHID flashing e **Reset Key**: There are no reset switches or pads. Follow this [guide](https://docs.qmk.fm/#/flashing_bootloadhid) -to have it flashed for the first time. Remember to add a `RESET` +to have it flashed for the first time. Remember to add a `QK_BOOT` key on your keymap for future endeavors. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/frooastboard/walnut/readme.md b/keyboards/frooastboard/walnut/readme.md index c4baa40ce44f..324069b4d7c4 100644 --- a/keyboards/frooastboard/walnut/readme.md +++ b/keyboards/frooastboard/walnut/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/geonworks/frogmini/readme.md b/keyboards/geonworks/frogmini/readme.md index 7c7c2e00f988..79ee6f2e32a8 100644 --- a/keyboards/geonworks/frogmini/readme.md +++ b/keyboards/geonworks/frogmini/readme.md @@ -20,7 +20,7 @@ The DFU state in the bootloader can be accessed in 2 ways: * **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the back of the PCB -* **Keycode in layout**: press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) +* **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout) ### Release Beta: @@ -28,7 +28,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the back of the PCB, for at least five seconds -* **Keycode in layout**: press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) +* **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout) ## Compile firmware diff --git a/keyboards/gl516/a52gl/readme.md b/keyboards/gl516/a52gl/readme.md index cfc7277eefe5..71d68942ac20 100644 --- a/keyboards/gl516/a52gl/readme.md +++ b/keyboards/gl516/a52gl/readme.md @@ -19,7 +19,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/gl516/j73gl/readme.md b/keyboards/gl516/j73gl/readme.md index b6f1ebdc243a..58842e09c1b8 100644 --- a/keyboards/gl516/j73gl/readme.md +++ b/keyboards/gl516/j73gl/readme.md @@ -19,7 +19,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/gl516/n51gl/readme.md b/keyboards/gl516/n51gl/readme.md index 916b8ff67181..b01ba883d70b 100644 --- a/keyboards/gl516/n51gl/readme.md +++ b/keyboards/gl516/n51gl/readme.md @@ -19,7 +19,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/gon/nerd60/readme.md b/keyboards/gon/nerd60/readme.md index 1b4689ea0330..fe7b01bf7e74 100644 --- a/keyboards/gon/nerd60/readme.md +++ b/keyboards/gon/nerd60/readme.md @@ -24,4 +24,4 @@ not work anymore. You will lose your warranty and official support from GON!_ ## Reset button -To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `RESET` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins. +To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `QK_BOOT` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins. diff --git a/keyboards/gon/nerdtkl/readme.md b/keyboards/gon/nerdtkl/readme.md index f8e982e77071..db7025f10bfa 100644 --- a/keyboards/gon/nerdtkl/readme.md +++ b/keyboards/gon/nerdtkl/readme.md @@ -24,4 +24,4 @@ not work anymore. You will lose your warranty and official support from GON!_ ## Reset button -To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `RESET` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins. +To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `QK_BOOT` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins. diff --git a/keyboards/gopolar/gg86/readme.md b/keyboards/gopolar/gg86/readme.md index 0e655efa128b..169d7e190499 100644 --- a/keyboards/gopolar/gg86/readme.md +++ b/keyboards/gopolar/gg86/readme.md @@ -21,4 +21,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Esc key) and plug in the keyboard * **Physical reset button**: Short press the button under Spacebar keycap to enter the Bootloader and flash the firmware -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/halokeys/elemental75/readme.md b/keyboards/halokeys/elemental75/readme.md index 6fd8ae056b29..405bfb67b1d4 100644 --- a/keyboards/halokeys/elemental75/readme.md +++ b/keyboards/halokeys/elemental75/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the Escape key down (top left key) and plug in the keyboard * **Physical reset button**: Hold the reset button on the back of the PCB for at least 5 seconds. -* **Keycode in layout**: Hold the key mapped to `RESET` if it is available +* **Keycode in layout**: Hold the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/han60/readme.md b/keyboards/han60/readme.md index d2f0fb981178..94dd28c1eced 100644 --- a/keyboards/han60/readme.md +++ b/keyboards/han60/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/10k/readme.md b/keyboards/handwired/10k/readme.md index 270297e92787..e681a274d30a 100644 --- a/keyboards/handwired/10k/readme.md +++ b/keyboards/handwired/10k/readme.md @@ -21,4 +21,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/3dfoxc/readme.md b/keyboards/handwired/3dfoxc/readme.md index 3d6e33a5c11c..9f4dff57d6f2 100644 --- a/keyboards/handwired/3dfoxc/readme.md +++ b/keyboards/handwired/3dfoxc/readme.md @@ -37,6 +37,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/3dortho14u/readme.md b/keyboards/handwired/3dortho14u/readme.md index 3163891d48fd..926721fc7278 100644 --- a/keyboards/handwired/3dortho14u/readme.md +++ b/keyboards/handwired/3dortho14u/readme.md @@ -37,4 +37,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/3dortho14u/rev1/readme.md b/keyboards/handwired/3dortho14u/rev1/readme.md index e785369b23b7..7a3017979799 100644 --- a/keyboards/handwired/3dortho14u/rev1/readme.md +++ b/keyboards/handwired/3dortho14u/rev1/readme.md @@ -36,4 +36,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/3dortho14u/rev2/readme.md b/keyboards/handwired/3dortho14u/rev2/readme.md index bb2e982130f4..0b2f1c09df13 100644 --- a/keyboards/handwired/3dortho14u/rev2/readme.md +++ b/keyboards/handwired/3dortho14u/rev2/readme.md @@ -36,4 +36,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/axon/readme.md b/keyboards/handwired/axon/readme.md index ca422130ef42..d48297b4f783 100644 --- a/keyboards/handwired/axon/readme.md +++ b/keyboards/handwired/axon/readme.md @@ -15,8 +15,8 @@ Make example for this keyboard (after setting up your build environment): ## To reset into bootloader mode: 1. While plugged in, press and hold `BOOT` switch -2. While holding `BOOT`, press `RESET` and hold it for a second or two -3. Release `RESET` +2. While holding `BOOT`, press `QK_BOOT` and hold it for a second or two +3. Release `QK_BOOT` 4. Release `BOOT` 5. The keyboard should now be recognized as a USBasp programmer device. diff --git a/keyboards/handwired/baredev/rev1/readme.md b/keyboards/handwired/baredev/rev1/readme.md index 3f852f2bc674..1dac2fb6adb6 100644 --- a/keyboards/handwired/baredev/rev1/readme.md +++ b/keyboards/handwired/baredev/rev1/readme.md @@ -26,4 +26,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available \ No newline at end of file diff --git a/keyboards/handwired/battleship_gamepad/readme.md b/keyboards/handwired/battleship_gamepad/readme.md index c566753161e8..58eb72bd2894 100644 --- a/keyboards/handwired/battleship_gamepad/readme.md +++ b/keyboards/handwired/battleship_gamepad/readme.md @@ -24,6 +24,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key in the 2x5 bank) and plug in the keyboard. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead. -* **Keycode in layout**: Press the key mapped to `RESET`. In the default layout this is the key at (0,0) on layer 1. +* **Keycode in layout**: Press the key mapped to `QK_BOOT`. In the default layout this is the key at (0,0) on layer 1. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/croxsplit44/readme.md b/keyboards/handwired/croxsplit44/readme.md index b9eeb305b2c1..64a5e2593eac 100644 --- a/keyboards/handwired/croxsplit44/readme.md +++ b/keyboards/handwired/croxsplit44/readme.md @@ -20,4 +20,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/dactyl_manuform/6x6/readme.md b/keyboards/handwired/dactyl_manuform/6x6/readme.md index 9b079be46681..c7500448da96 100644 --- a/keyboards/handwired/dactyl_manuform/6x6/readme.md +++ b/keyboards/handwired/dactyl_manuform/6x6/readme.md @@ -60,4 +60,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at F1 for left side, and F7 for right side. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET`, in dumam keymap it's assigned to F1 and F12 keys on mod layers. +* **Keycode in layout**: Press the key mapped to `QK_BOOT`, in dumam keymap it's assigned to F1 and F12 keys on mod layers. diff --git a/keyboards/handwired/elrgo_s/readme.md b/keyboards/handwired/elrgo_s/readme.md index 5fb5ab6acb0f..d741f423d999 100644 --- a/keyboards/handwired/elrgo_s/readme.md +++ b/keyboards/handwired/elrgo_s/readme.md @@ -25,4 +25,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button through the hole on the left side of the case. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/hillside/0_1/readme.md b/keyboards/handwired/hillside/0_1/readme.md index f1ff0f850667..3ae6b8bf3d0f 100644 --- a/keyboards/handwired/hillside/0_1/readme.md +++ b/keyboards/handwired/hillside/0_1/readme.md @@ -24,6 +24,6 @@ Flashing example for this keyboard: Enter the bootloader by either: * **Physical reset button**: Briefly press the button on the front of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/hillside/46/readme.md b/keyboards/handwired/hillside/46/readme.md index 8765c8029ee6..f1c9483cabae 100644 --- a/keyboards/handwired/hillside/46/readme.md +++ b/keyboards/handwired/hillside/46/readme.md @@ -24,6 +24,6 @@ Flashing example for this keyboard: Enter the bootloader by either: * **Physical reset button**: Briefly press the button on the front of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/hillside/52/readme.md b/keyboards/handwired/hillside/52/readme.md index 62ca08ad6782..3878bc062a62 100644 --- a/keyboards/handwired/hillside/52/readme.md +++ b/keyboards/handwired/hillside/52/readme.md @@ -24,6 +24,6 @@ Flashing example for this keyboard: Enter the bootloader by either: * **Physical reset button**: Briefly press the button on the front of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/lagrange/readme.md b/keyboards/handwired/lagrange/readme.md index 5d7f5bb08ede..a4157771a497 100644 --- a/keyboards/handwired/lagrange/readme.md +++ b/keyboards/handwired/lagrange/readme.md @@ -16,6 +16,6 @@ Flashing example for this keyboard: make handwired/lagrange:default:flash -To program the keyboard you'll need to reset it. This can be accomplished, either through the reset button, accessible via a hole in the bottom cover, or, if you've assigned the `RESET` keycode to a key, by pressing that key. +To program the keyboard you'll need to reset it. This can be accomplished, either through the reset button, accessible via a hole in the bottom cover, or, if you've assigned the `QK_BOOT` keycode to a key, by pressing that key. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/lemonpad/readme.md b/keyboards/handwired/lemonpad/readme.md index 4c1c2082e904..788bca6b4387 100644 --- a/keyboards/handwired/lemonpad/readme.md +++ b/keyboards/handwired/lemonpad/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/m40/5x5_macropad/readme.md b/keyboards/handwired/m40/5x5_macropad/readme.md index 7ce38d6593f6..457b8cf4ee44 100644 --- a/keyboards/handwired/m40/5x5_macropad/readme.md +++ b/keyboards/handwired/m40/5x5_macropad/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. In default layout (if you flashed it already once) it is the top-right button. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. In default layout (if you flashed it already once) it is the top-right button. diff --git a/keyboards/handwired/macroboard/readme.md b/keyboards/handwired/macroboard/readme.md index ee2351f99fca..ea32085bc063 100644 --- a/keyboards/handwired/macroboard/readme.md +++ b/keyboards/handwired/macroboard/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available, by default 5th column, 5th row +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available, by default 5th column, 5th row diff --git a/keyboards/handwired/meck_tkl/readme.md b/keyboards/handwired/meck_tkl/readme.md index ec09047dde2a..9db9cd222fb9 100644 --- a/keyboards/handwired/meck_tkl/readme.md +++ b/keyboards/handwired/meck_tkl/readme.md @@ -24,7 +24,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## Wiring instructions diff --git a/keyboards/handwired/snatchpad/readme.md b/keyboards/handwired/snatchpad/readme.md index 98021cc6bde5..9e502579b509 100644 --- a/keyboards/handwired/snatchpad/readme.md +++ b/keyboards/handwired/snatchpad/readme.md @@ -31,4 +31,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/swiftrax/bumblebee/readme.md b/keyboards/handwired/swiftrax/bumblebee/readme.md index 32091cb83b98..343fb81bf891 100644 --- a/keyboards/handwired/swiftrax/bumblebee/readme.md +++ b/keyboards/handwired/swiftrax/bumblebee/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/handwired/swiftrax/digicarp65/readme.md b/keyboards/handwired/swiftrax/digicarp65/readme.md index 619ec519f08e..34e0c0b755ea 100644 --- a/keyboards/handwired/swiftrax/digicarp65/readme.md +++ b/keyboards/handwired/swiftrax/digicarp65/readme.md @@ -17,5 +17,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key)and plug in the keyboard -* **Physical reset button**: Briefly short the pad on the back of the PCB labeled RESET -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Physical reset button**: Briefly short the pad on the back of the PCB labeled QK_BOOT +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/swiftrax/digicarpice/readme.md b/keyboards/handwired/swiftrax/digicarpice/readme.md index 228db23a7f8f..d9deec7dc787 100644 --- a/keyboards/handwired/swiftrax/digicarpice/readme.md +++ b/keyboards/handwired/swiftrax/digicarpice/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard * **Physical reset button**: short the pads on the back of the pcb -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/handwired/swiftrax/glacier/readme.md b/keyboards/handwired/swiftrax/glacier/readme.md index 36588e000e7f..e09c179ae941 100644 --- a/keyboards/handwired/swiftrax/glacier/readme.md +++ b/keyboards/handwired/swiftrax/glacier/readme.md @@ -9,7 +9,7 @@ ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead - * **Keycode in layout**: Press the key mapped to `RESET` if it is available + * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for flashing this keyboard (after setting up your build environment): diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md index f732295ba3f6..6b98bdc9b9fa 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md @@ -35,4 +35,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * **Bootmagic reset**: Hold down the top right key on the right side, or the top left key on the left side while plugging in. * **Physical reset button**: Briefly press the "USER" button on the BlackPill -* **Keycode in layout**: Press the key mapped to `RESET`. +* **Keycode in layout**: Press the key mapped to `QK_BOOT`. diff --git a/keyboards/handwired/tractyl_manuform/readme.md b/keyboards/handwired/tractyl_manuform/readme.md index e78fd2ee06ae..576a7cc74e3c 100644 --- a/keyboards/handwired/tractyl_manuform/readme.md +++ b/keyboards/handwired/tractyl_manuform/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/wakizashi40/readme.md b/keyboards/handwired/wakizashi40/readme.md index 8bb6c2aebc75..b419f5032be8 100644 --- a/keyboards/handwired/wakizashi40/readme.md +++ b/keyboards/handwired/wakizashi40/readme.md @@ -18,4 +18,4 @@ See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/hineybush/h08_ocelot/readme.md b/keyboards/hineybush/h08_ocelot/readme.md index 07d170101ccb..fd44f4263d03 100644 --- a/keyboards/hineybush/h08_ocelot/readme.md +++ b/keyboards/hineybush/h08_ocelot/readme.md @@ -14,7 +14,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/hineybush/h65/readme.md b/keyboards/hineybush/h65/readme.md index c793a449665c..91a15c62229d 100644 --- a/keyboards/hineybush/h65/readme.md +++ b/keyboards/hineybush/h65/readme.md @@ -14,7 +14,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/hineybush/h65_hotswap/readme.md b/keyboards/hineybush/h65_hotswap/readme.md index 5e2250b5afde..591b25b337d2 100644 --- a/keyboards/hineybush/h65_hotswap/readme.md +++ b/keyboards/hineybush/h65_hotswap/readme.md @@ -14,7 +14,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/hineybush/ibis/readme.md b/keyboards/hineybush/ibis/readme.md index 0c345e7c8160..e20be2e7f6cd 100644 --- a/keyboards/hineybush/ibis/readme.md +++ b/keyboards/hineybush/ibis/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/horizon/readme.md b/keyboards/horizon/readme.md index 7999503fb521..1ac64b42ce2e 100644 --- a/keyboards/horizon/readme.md +++ b/keyboards/horizon/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key and plug in the keyboard. * **Physical reset button**: Briefly press the button on the top center of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. diff --git a/keyboards/horrortroll/chinese_pcb/black_e65/readme.md b/keyboards/horrortroll/chinese_pcb/black_e65/readme.md index 2a08ee20f39d..115f91424be3 100644 --- a/keyboards/horrortroll/chinese_pcb/black_e65/readme.md +++ b/keyboards/horrortroll/chinese_pcb/black_e65/readme.md @@ -21,4 +21,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (3,6) in the matrix (B key) and plug in the keyboard * **Physical reset button**: Press and hold the button on the back of the PCB, then plug in the keyboard -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/horrortroll/chinese_pcb/devil68_pro/readme.md b/keyboards/horrortroll/chinese_pcb/devil68_pro/readme.md index 27bd974af43e..0d486832b316 100644 --- a/keyboards/horrortroll/chinese_pcb/devil68_pro/readme.md +++ b/keyboards/horrortroll/chinese_pcb/devil68_pro/readme.md @@ -21,4 +21,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (3,6) in the matrix (B key) and plug in the keyboard * **Reset by wire**: Using a wire, 1 head to GND hole and other one to Reset pin on MCU -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/horrortroll/handwired_k552/readme.md b/keyboards/horrortroll/handwired_k552/readme.md index 85e99f4cd47c..e45cab9f9cb5 100644 --- a/keyboards/horrortroll/handwired_k552/readme.md +++ b/keyboards/horrortroll/handwired_k552/readme.md @@ -19,4 +19,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (4,6) in the matrix (B key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/horrortroll/lemon40/readme.md b/keyboards/horrortroll/lemon40/readme.md index 4c2a7bd54312..7cb71f9f2069 100644 --- a/keyboards/horrortroll/lemon40/readme.md +++ b/keyboards/horrortroll/lemon40/readme.md @@ -21,4 +21,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Esc key) and plug in the keyboard * **Reset by wire**: Using a wire, 1 head to GND hole and other one to RST hole -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/horrortroll/paws60/readme.md b/keyboards/horrortroll/paws60/readme.md index 62783d3b5e64..93acfdfc3e07 100644 --- a/keyboards/horrortroll/paws60/readme.md +++ b/keyboards/horrortroll/paws60/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (3,6) in the matrix (B key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/ibnuda/squiggle/readme.md b/keyboards/ibnuda/squiggle/readme.md index 95204ade57d7..20998844c9f1 100644 --- a/keyboards/ibnuda/squiggle/readme.md +++ b/keyboards/ibnuda/squiggle/readme.md @@ -21,4 +21,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to To enter to the bootloader you need to: -* Press the key mapped to `RESET` +* Press the key mapped to `QK_BOOT` diff --git a/keyboards/idobao/id63/readme.md b/keyboards/idobao/id63/readme.md index 15ed24824c4e..a4566f6f20ec 100644 --- a/keyboards/idobao/id63/readme.md +++ b/keyboards/idobao/id63/readme.md @@ -36,4 +36,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the [Escape] key and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET`, default is [Fn]+[B] +* **Keycode in layout**: Press the key mapped to `QK_BOOT`, default is [Fn]+[B] diff --git a/keyboards/idobao/id67/readme.md b/keyboards/idobao/id67/readme.md index b69e2e60b171..aff9fa3dd9f9 100644 --- a/keyboards/idobao/id67/readme.md +++ b/keyboards/idobao/id67/readme.md @@ -37,4 +37,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the `Escape` key and plug in the keyboard. * **Physical reset button**: Briefly press the button on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` (FN+Z). +* **Keycode in layout**: Press the key mapped to `QK_BOOT` (FN+Z). diff --git a/keyboards/idobao/id75/v2/readme.md b/keyboards/idobao/id75/v2/readme.md index 76a94ae38c21..6e6209b467c4 100644 --- a/keyboards/idobao/id75/v2/readme.md +++ b/keyboards/idobao/id75/v2/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/idobao/id80/v3/readme.md b/keyboards/idobao/id80/v3/readme.md index dc6c67b4f471..11e9865a9a01 100644 --- a/keyboards/idobao/id80/v3/readme.md +++ b/keyboards/idobao/id80/v3/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/idobao/id87/v2/readme.md b/keyboards/idobao/id87/v2/readme.md index 06a3f2c08ac8..849e64215731 100644 --- a/keyboards/idobao/id87/v2/readme.md +++ b/keyboards/idobao/id87/v2/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/idobao/id96/readme.md b/keyboards/idobao/id96/readme.md index 01c42b4e73ab..e9cbed5270ca 100644 --- a/keyboards/idobao/id96/readme.md +++ b/keyboards/idobao/id96/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/idobao/montex/v1rgb/readme.md b/keyboards/idobao/montex/v1rgb/readme.md index 296f05f239c5..8066c2193da9 100755 --- a/keyboards/idobao/montex/v1rgb/readme.md +++ b/keyboards/idobao/montex/v1rgb/readme.md @@ -27,4 +27,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or [Esc]) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/idobao/montex/v2/readme.md b/keyboards/idobao/montex/v2/readme.md index 793507b8f1f3..63808c0a5011 100755 --- a/keyboards/idobao/montex/v2/readme.md +++ b/keyboards/idobao/montex/v2/readme.md @@ -38,4 +38,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/iron180/readme.md b/keyboards/iron180/readme.md index d89ca912ef58..bfcce13f09fe 100644 --- a/keyboards/iron180/readme.md +++ b/keyboards/iron180/readme.md @@ -18,7 +18,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard with the key pressed; * **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds; -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (ESCAPE key in layer 1 of the default layout); +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (ESCAPE key in layer 1 of the default layout); ## Compile firmware and flash diff --git a/keyboards/jels/jels60/readme.md b/keyboards/jels/jels60/readme.md index 0b72d3e346d0..8def326cba21 100644 --- a/keyboards/jels/jels60/readme.md +++ b/keyboards/jels/jels60/readme.md @@ -20,4 +20,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * **Bootmagic reset**: Hold down the top left key (ESC/Tilde) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/jels/jels88/readme.md b/keyboards/jels/jels88/readme.md index 37d18dbf407e..fa590aa303f6 100644 --- a/keyboards/jels/jels88/readme.md +++ b/keyboards/jels/jels88/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top right key (ESC) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/jorne/readme.md b/keyboards/jorne/readme.md index 71c698e67ed2..77d56b9d5152 100644 --- a/keyboards/jorne/readme.md +++ b/keyboards/jorne/readme.md @@ -14,7 +14,7 @@ Jorne is essentially [Corne](https://github.com/foostan/crkbd) but with an extra Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the reset button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` +* **Keycode in layout**: Press the key mapped to `QK_BOOT` ## Make diff --git a/keyboards/k34/readme.md b/keyboards/k34/readme.md index 8f17c7e5de1a..8576def9471b 100644 --- a/keyboards/k34/readme.md +++ b/keyboards/k34/readme.md @@ -11,7 +11,7 @@ All hardware supported can be found in the [k34 repository](https://github.com/w ## Flashing Instructions -To enter the bootloader, short the RST and GND pins, or press the key mapped to `RESET`. +To enter the bootloader, short the RST and GND pins, or press the key mapped to `QK_BOOT`. Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kapl/readme.md b/keyboards/kapl/readme.md index c42a5d8947b0..4ccfb8dcbad3 100644 --- a/keyboards/kapl/readme.md +++ b/keyboards/kapl/readme.md @@ -24,4 +24,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the reset button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/kb58/readme.md b/keyboards/kb58/readme.md index 6d02b1787aa8..4ea36cbbdee1 100644 --- a/keyboards/kb58/readme.md +++ b/keyboards/kb58/readme.md @@ -18,6 +18,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kb_elmo/vertex/readme.md b/keyboards/kb_elmo/vertex/readme.md index 0710e480704c..cbcdd9a1795e 100644 --- a/keyboards/kb_elmo/vertex/readme.md +++ b/keyboards/kb_elmo/vertex/readme.md @@ -22,4 +22,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * **Bootmagic reset**: Hold down the top left key and plug in the keyboard * **Physical reset button**: Briefly press the button labeled "Reset" on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/kbdfans/baguette66/rgb/readme.md b/keyboards/kbdfans/baguette66/rgb/readme.md index d8054ea8a720..a5b67d03b8c3 100644 --- a/keyboards/kbdfans/baguette66/rgb/readme.md +++ b/keyboards/kbdfans/baguette66/rgb/readme.md @@ -13,7 +13,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kbdfans/baguette66/soldered/readme.md b/keyboards/kbdfans/baguette66/soldered/readme.md index 5118864331ec..148e042c6ca2 100644 --- a/keyboards/kbdfans/baguette66/soldered/readme.md +++ b/keyboards/kbdfans/baguette66/soldered/readme.md @@ -13,7 +13,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kbdfans/boop65/rgb/readme.md b/keyboards/kbdfans/boop65/rgb/readme.md index 9b24b62af46e..b8a2e5993c3e 100644 --- a/keyboards/kbdfans/boop65/rgb/readme.md +++ b/keyboards/kbdfans/boop65/rgb/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/bounce/75/hotswap/readme.md b/keyboards/kbdfans/bounce/75/hotswap/readme.md index eb6b8e6fc0e1..7e631099ccec 100644 --- a/keyboards/kbdfans/bounce/75/hotswap/readme.md +++ b/keyboards/kbdfans/bounce/75/hotswap/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/kbdfans/bounce/75/soldered/readme.md b/keyboards/kbdfans/bounce/75/soldered/readme.md index fb0b364d19db..f18847b8fb9c 100644 --- a/keyboards/kbdfans/bounce/75/soldered/readme.md +++ b/keyboards/kbdfans/bounce/75/soldered/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/bounce/pad/readme.md b/keyboards/kbdfans/bounce/pad/readme.md index ae0276ed28c7..54ba70a011ea 100644 --- a/keyboards/kbdfans/bounce/pad/readme.md +++ b/keyboards/kbdfans/bounce/pad/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/kbd19x/readme.md b/keyboards/kbdfans/kbd19x/readme.md index 910b2f1b89cc..1c2f7f2c1caf 100644 --- a/keyboards/kbdfans/kbd19x/readme.md +++ b/keyboards/kbdfans/kbd19x/readme.md @@ -25,6 +25,6 @@ Flashing example for this keyboard: To reset the board into bootloader mode, do one of the following: * **Bootmagic reset**: Hold the `Esc` key while connecting the USB cable (also erases persistent settings) -* **Keycode in keymap**: Press the key mapped to `RESET` if it is available (`Fn`+`Backspace` by default) +* **Keycode in keymap**: Press the key mapped to `QK_BOOT` if it is available (`Fn`+`Backspace` by default) See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v4/readme.md b/keyboards/kbdfans/kbd67/mkiirgb/v4/readme.md index b603992f6993..ad8b38a62e3f 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v4/readme.md +++ b/keyboards/kbdfans/kbd67/mkiirgb/v4/readme.md @@ -15,4 +15,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down esc in the keyboard then replug * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` \ No newline at end of file diff --git a/keyboards/kbdfans/kbd67/mkiirgb_iso/readme.md b/keyboards/kbdfans/kbd67/mkiirgb_iso/readme.md index 7673acc580da..b542cb5aaa03 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb_iso/readme.md +++ b/keyboards/kbdfans/kbd67/mkiirgb_iso/readme.md @@ -15,4 +15,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down esc in the keyboard then replug * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` +* **Keycode in layout**: Press the key mapped to `QK_BOOT` diff --git a/keyboards/kbdfans/kbd75hs/readme.md b/keyboards/kbdfans/kbd75hs/readme.md index 4f7943d4fee4..0326a1e00852 100644 --- a/keyboards/kbdfans/kbd75hs/readme.md +++ b/keyboards/kbdfans/kbd75hs/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/kbd75rgb/readme.md b/keyboards/kbdfans/kbd75rgb/readme.md index 2dc002022fcb..acd3d3032999 100644 --- a/keyboards/kbdfans/kbd75rgb/readme.md +++ b/keyboards/kbdfans/kbd75rgb/readme.md @@ -13,7 +13,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kbdfans/odin/rgb/readme.md b/keyboards/kbdfans/odin/rgb/readme.md index 3530fcca408c..e37fc13ce130 100644 --- a/keyboards/kbdfans/odin/rgb/readme.md +++ b/keyboards/kbdfans/odin/rgb/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**:press and hold the button on the back of the PCB, then plugin to PC -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/odin/soldered/readme.md b/keyboards/kbdfans/odin/soldered/readme.md index 1ffc34597fba..723bceecb237 100644 --- a/keyboards/kbdfans/odin/soldered/readme.md +++ b/keyboards/kbdfans/odin/soldered/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**:press and hold the button on the back of the PCB, then plugin to PC -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/phaseone/readme.md b/keyboards/kbdfans/phaseone/readme.md index b5b21da672d0..451a3e2a44f2 100644 --- a/keyboards/kbdfans/phaseone/readme.md +++ b/keyboards/kbdfans/phaseone/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kbdfans/tiger80/readme.md b/keyboards/kbdfans/tiger80/readme.md index 60190805d788..c5fc05687568 100644 --- a/keyboards/kbdfans/tiger80/readme.md +++ b/keyboards/kbdfans/tiger80/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbnordic/nordic60/readme.md b/keyboards/kbnordic/nordic60/readme.md index 7b4f29d22e20..43b2bb761dfa 100644 --- a/keyboards/kbnordic/nordic60/readme.md +++ b/keyboards/kbnordic/nordic60/readme.md @@ -17,4 +17,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the ESC key * **Physical reset button**: Briefly press the button on the back of the PCB (S301) or short the two pads in the "RST" header. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/keebio/bamfk1/readme.md b/keyboards/keebio/bamfk1/readme.md index a90ee8ac8cd1..5fdd285afdd6 100644 --- a/keyboards/keebio/bamfk1/readme.md +++ b/keyboards/keebio/bamfk1/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/keebio/bigswitchseat/readme.md b/keyboards/keebio/bigswitchseat/readme.md index 43e62d4e53e1..dc20a9cb93a8 100644 --- a/keyboards/keebio/bigswitchseat/readme.md +++ b/keyboards/keebio/bigswitchseat/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/keebsforall/coarse60/readme.md b/keyboards/keebsforall/coarse60/readme.md index cde61524996b..4d4f864eed27 100644 --- a/keyboards/keebsforall/coarse60/readme.md +++ b/keyboards/keebsforall/coarse60/readme.md @@ -17,6 +17,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key (Escape by default) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB (S1) -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/keebsforall/freebirdnp/lite/readme.md b/keyboards/keebsforall/freebirdnp/lite/readme.md index e0d0dda059b8..b2860abc84e0 100644 --- a/keyboards/keebsforall/freebirdnp/lite/readme.md +++ b/keyboards/keebsforall/freebirdnp/lite/readme.md @@ -14,6 +14,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/keebsforall/freebirdnp/pro/readme.md b/keyboards/keebsforall/freebirdnp/pro/readme.md index 3b06a72d115b..b53e4b9fd9f8 100644 --- a/keyboards/keebsforall/freebirdnp/pro/readme.md +++ b/keyboards/keebsforall/freebirdnp/pro/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/keebsforall/freebirdtkl/readme.md b/keyboards/keebsforall/freebirdtkl/readme.md index 5b5bade2782c..1b61d3c141c3 100644 --- a/keyboards/keebsforall/freebirdtkl/readme.md +++ b/keyboards/keebsforall/freebirdtkl/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/keybee/keybee65/readme.md b/keyboards/keybee/keybee65/readme.md index afe9cfd225ae..a6fe9cb0c6e8 100644 --- a/keyboards/keybee/keybee65/readme.md +++ b/keyboards/keybee/keybee65/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the Enter key on layer 1 which is mapped to `RESET` \ No newline at end of file +* **Keycode in layout**: Press the Enter key on layer 1 which is mapped to `QK_BOOT` \ No newline at end of file diff --git a/keyboards/keystonecaps/gameroyadvance/readme.md b/keyboards/keystonecaps/gameroyadvance/readme.md index cc733cea46e9..9a0c74ef2625 100644 --- a/keyboards/keystonecaps/gameroyadvance/readme.md +++ b/keyboards/keystonecaps/gameroyadvance/readme.md @@ -25,6 +25,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` (FN + Escape by default) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` (FN + Escape by default) Special thanks to @tpstevens for all of his hard work in creating these firmware files from the mess that I had made. diff --git a/keyboards/keyten/aperture/readme.md b/keyboards/keyten/aperture/readme.md index 80cd0b8b9e34..06417bae0f65 100644 --- a/keyboards/keyten/aperture/readme.md +++ b/keyboards/keyten/aperture/readme.md @@ -25,5 +25,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -* Keycode in layout: Press the key mapped to RESET if it is available +* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available * Physical reset button: Press the button on the back of the PCB diff --git a/keyboards/keyten/kt60_m/readme.md b/keyboards/keyten/kt60_m/readme.md index 32ca32c4b529..6a44fb23931d 100644 --- a/keyboards/keyten/kt60_m/readme.md +++ b/keyboards/keyten/kt60_m/readme.md @@ -23,5 +23,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -* Keycode in layout: Press the key mapped to RESET if it is available +* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available * Physical reset button: Press the button on the back of the PCB diff --git a/keyboards/kikoslab/ellora65/readme.md b/keyboards/kikoslab/ellora65/readme.md index 419c5418ec3a..b021188cf928 100644 --- a/keyboards/kikoslab/ellora65/readme.md +++ b/keyboards/kikoslab/ellora65/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (1,0) in the matrix (escape key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kin80/readme.md b/keyboards/kin80/readme.md index 9adee072e7f3..3ed52b4a594a 100644 --- a/keyboards/kin80/readme.md +++ b/keyboards/kin80/readme.md @@ -30,4 +30,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the the top left key and plug in the keyboard. * **Physical reset button**. Hold 'boot0' button on MCU board, press 'reset', then release 'boot0'. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available \ No newline at end of file diff --git a/keyboards/kiwikey/borderland/readme.md b/keyboards/kiwikey/borderland/readme.md index 98f76e0f132d..6a7b602ba9b6 100644 --- a/keyboards/kiwikey/borderland/readme.md +++ b/keyboards/kiwikey/borderland/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET`, in default keymap it is `Fn+R` +* **Keycode in layout**: Press the key mapped to `QK_BOOT`, in default keymap it is `Fn+R` diff --git a/keyboards/kopibeng/mnk65/readme.md b/keyboards/kopibeng/mnk65/readme.md index 80e256e617ff..f4c07ce6a8de 100644 --- a/keyboards/kopibeng/mnk65/readme.md +++ b/keyboards/kopibeng/mnk65/readme.md @@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * Physical reset button: Press the RESET switch on top side of PCB. * Bootmagic reset: Unplug keyboard, hold down ESC key and plug in the keyboard. -* Keycode reset: Press the RESET keycode (default: MO(1) + Home keys) in layout if available. +* Keycode reset: Press the `QK_BOOT` keycode (default: MO(1) + Home keys) in layout if available. diff --git a/keyboards/kopibeng/typ65/readme.md b/keyboards/kopibeng/typ65/readme.md index af8106891d6e..4e9cd6337437 100644 --- a/keyboards/kopibeng/typ65/readme.md +++ b/keyboards/kopibeng/typ65/readme.md @@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * Physical reset button: Press the RESET switch on top side of PCB. * Bootmagic reset: Unplug keyboard, hold down ESC key and plug in the keyboard. -* Keycode reset: Press the RESET keycode (default: MO(1) + HOME keys in default layout). +* Keycode reset: Press the `QK_BOOT` keycode (default: MO(1) + HOME keys in default layout). diff --git a/keyboards/kopibeng/xt60/readme.md b/keyboards/kopibeng/xt60/readme.md index 177b22be4c76..6eacaded6f6a 100644 --- a/keyboards/kopibeng/xt60/readme.md +++ b/keyboards/kopibeng/xt60/readme.md @@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * Physical reset button: Press the RESET switch on top side of PCB. * Bootmagic reset: Unplug keyboard, hold down ESC key and plug in the keyboard. -* Keycode reset: Press the RESET keycode (default: MO(1) + R keys) in layout if available. \ No newline at end of file +* Keycode reset: Press the `QK_BOOT` keycode (default: MO(1) + R keys) in layout if available. \ No newline at end of file diff --git a/keyboards/kopibeng/xt60_singa/readme.md b/keyboards/kopibeng/xt60_singa/readme.md index 5da2a0a60623..f8efffcf1c27 100644 --- a/keyboards/kopibeng/xt60_singa/readme.md +++ b/keyboards/kopibeng/xt60_singa/readme.md @@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * Physical reset button: Press the RESET switch on top side of PCB. * Bootmagic reset: Unplug keyboard, hold down ESC key and plug in the keyboard. -* Keycode reset: Press the RESET keycode (default: MO(1) + R keys) in layout if available. \ No newline at end of file +* Keycode reset: Press the `QK_BOOT` keycode (default: MO(1) + R keys) in layout if available. \ No newline at end of file diff --git a/keyboards/kopibeng/xt8x/readme.md b/keyboards/kopibeng/xt8x/readme.md index cdb333a26092..0c94adec38ea 100644 --- a/keyboards/kopibeng/xt8x/readme.md +++ b/keyboards/kopibeng/xt8x/readme.md @@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * Physical reset button: Press the RESET switch on top side of PCB. * Bootmagic reset: Unplug keyboard, hold down ESC key and plug in the keyboard. -* Keycode reset: Press the RESET keycode (default: MO(1) + R keys) in layout if available. +* Keycode reset: Press the `QK_BOOT` keycode (default: MO(1) + R keys) in layout if available. diff --git a/keyboards/kprepublic/bm60hsrgb_ec/rev1/readme.md b/keyboards/kprepublic/bm60hsrgb_ec/rev1/readme.md index 1e284041d074..f22bf4f97cae 100644 --- a/keyboards/kprepublic/bm60hsrgb_ec/rev1/readme.md +++ b/keyboards/kprepublic/bm60hsrgb_ec/rev1/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kprepublic/bm60hsrgb_ec/rev2/readme.md b/keyboards/kprepublic/bm60hsrgb_ec/rev2/readme.md index 6454a574204d..caf1dae82ab9 100644 --- a/keyboards/kprepublic/bm60hsrgb_ec/rev2/readme.md +++ b/keyboards/kprepublic/bm60hsrgb_ec/rev2/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kudox_full/readme.md b/keyboards/kudox_full/readme.md index 185a1394d4d5..494d7508c844 100644 --- a/keyboards/kudox_full/readme.md +++ b/keyboards/kudox_full/readme.md @@ -16,7 +16,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## Building Firmware diff --git a/keyboards/late9/readme.md b/keyboards/late9/readme.md index 1d85e788fbe7..93e5a408230a 100644 --- a/keyboards/late9/readme.md +++ b/keyboards/late9/readme.md @@ -20,7 +20,7 @@ Flashing example for this keyboard: make late9/rev1:default:flash -When asked by the terminal, short with a metal wire the pins on the backside of the board highlighted as `RST` (one is the `RESET` and the other one is `GROUND`) to enter the bootloader and let the OS detects the device. +When asked by the terminal, short with a metal wire the pins on the backside of the board highlighted as `RST` (one is the `QK_BOOT` and the other one is `GROUND`) to enter the bootloader and let the OS detects the device. After installing this firmware you can use Bootmagic to enter the bootloader while plugging in your LATE-9. By default it's the button on the upper-left of the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lefty/readme.md b/keyboards/lefty/readme.md index f8cc2ec2037d..7562517a2294 100644 --- a/keyboards/lefty/readme.md +++ b/keyboards/lefty/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead -Keycode in layout: Press the key mapped to RESET if it is available +Keycode in layout: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/lfkeyboards/mini1800/readme.md b/keyboards/lfkeyboards/mini1800/readme.md index 4e35ac537ead..9cf774885615 100644 --- a/keyboards/lfkeyboards/mini1800/readme.md +++ b/keyboards/lfkeyboards/mini1800/readme.md @@ -21,6 +21,6 @@ Flashing example for this keyboard: To reset the board into bootloader mode, do one of the following: * **Physical reset button**: Briefly press the button on the bottom of the PCB (between Q and W keys) -* **Keycode in keymap**: Press the key mapped to `RESET` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default) +* **Keycode in keymap**: Press the key mapped to `QK_BOOT` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default) See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lfkeyboards/mini1800/reva/readme.md b/keyboards/lfkeyboards/mini1800/reva/readme.md index 8460bb53262a..7c1e5c10de9b 100644 --- a/keyboards/lfkeyboards/mini1800/reva/readme.md +++ b/keyboards/lfkeyboards/mini1800/reva/readme.md @@ -17,6 +17,6 @@ Flashing example for this keyboard: To reset the board into bootloader mode, do one of the following: * **Physical reset button**: Briefly press the button on the bottom of the PCB (between Q and W keys) -* **Keycode in keymap**: Press the key mapped to `RESET` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default) +* **Keycode in keymap**: Press the key mapped to `QK_BOOT` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default) See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lfkeyboards/mini1800/revc/readme.md b/keyboards/lfkeyboards/mini1800/revc/readme.md index 5d442cb6d959..c872c15ed8c1 100644 --- a/keyboards/lfkeyboards/mini1800/revc/readme.md +++ b/keyboards/lfkeyboards/mini1800/revc/readme.md @@ -19,6 +19,6 @@ Flashing example for this keyboard: To reset the board into bootloader mode, do one of the following: * **Physical reset button**: Briefly press the button on the bottom of the PCB (between Q and W keys) -* **Keycode in keymap**: Press the key mapped to `RESET` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default) +* **Keycode in keymap**: Press the key mapped to `QK_BOOT` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default) See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lime/readme.md b/keyboards/lime/readme.md index 539ae97fd333..bd72b9d6c519 100644 --- a/keyboards/lime/readme.md +++ b/keyboards/lime/readme.md @@ -22,7 +22,7 @@ Flashing example for this keyboard: Press reset button on he keyboard when asked. You can do that in 3 ways: * **Physical reset button**: Briefly press the button near the TRRS connector on the PCB - if you haven't installed one, short the pads instead -* **Keycode in layout**: Press the key mapped to `RESET` (`Lower` + `Raise` + `Esc` on the default layout) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` (`Lower` + `Raise` + `Esc` on the default layout) * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard Disconnect the first half, connect the second one and repeat the process. diff --git a/keyboards/linworks/fave65h/readme.md b/keyboards/linworks/fave65h/readme.md index 712a5e0fd41d..09649fa860cb 100644 --- a/keyboards/linworks/fave65h/readme.md +++ b/keyboards/linworks/fave65h/readme.md @@ -17,7 +17,7 @@ Make example for this keyboard (after setting up your build environment): ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) -* **Physical reset short**: Briefly short the 2 pads labelled RESET on the back of the PCB -* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` +* **Physical reset short**: Briefly short the 2 pads labelled QK_BOOT on the back of the PCB +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `QK_BOOT` See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/linworks/fave84h/readme.md b/keyboards/linworks/fave84h/readme.md index 3dd93ac76252..22ce5fd428a9 100644 --- a/keyboards/linworks/fave84h/readme.md +++ b/keyboards/linworks/fave84h/readme.md @@ -19,5 +19,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) -* **Physical reset short**: Briefly short the 2 pads labelled RESET on the back of the PCB -* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` +* **Physical reset short**: Briefly short the 2 pads labelled QK_BOOT on the back of the PCB +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `QK_BOOT` diff --git a/keyboards/linworks/fave87h/readme.md b/keyboards/linworks/fave87h/readme.md index 8bc05fd4d48d..bda921a61b7a 100644 --- a/keyboards/linworks/fave87h/readme.md +++ b/keyboards/linworks/fave87h/readme.md @@ -19,5 +19,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) -* **Physical reset short**: Briefly short the 2 pads labelled RESET on the back of the PCB -* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` +* **Physical reset short**: Briefly short the 2 pads labelled QK_BOOT on the back of the PCB +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `QK_BOOT` diff --git a/keyboards/lucid/alexa/readme.md b/keyboards/lucid/alexa/readme.md index a0cef7291377..6fc4aac146af 100644 --- a/keyboards/lucid/alexa/readme.md +++ b/keyboards/lucid/alexa/readme.md @@ -20,6 +20,6 @@ Flashing example for this keyboard: Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (Fn+Backslash by default) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (Fn+Backslash by default) See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lyso1/lefishe/readme.md b/keyboards/lyso1/lefishe/readme.md index eb8322b2df05..07fe84ba171b 100644 --- a/keyboards/lyso1/lefishe/readme.md +++ b/keyboards/lyso1/lefishe/readme.md @@ -15,7 +15,7 @@ Enter into the bootloader to flash new firmware in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix(The F1 key in this case) and plug the the keyboard in. * **Physical reset button**: Briefly press the button on the back and left side of the PCB(exactly under where the "2" key would be located) while the PCB is plugged in. - * **Keycode in layout**: Press the key mapped to `RESET` (RALT + E in this case) while the keyboard is plugged in. + * **Keycode in layout**: Press the key mapped to `QK_BOOT` (RALT + E in this case) while the keyboard is plugged in. Flashing example for this keyboard: diff --git a/keyboards/lz/erghost/readme.md b/keyboards/lz/erghost/readme.md index 8a48d912d079..0a4a504227a0 100644 --- a/keyboards/lz/erghost/readme.md +++ b/keyboards/lz/erghost/readme.md @@ -23,5 +23,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * **Physical reset button**: Press the button on the back of the PCB \ No newline at end of file diff --git a/keyboards/machine_industries/m4_a/readme.md b/keyboards/machine_industries/m4_a/readme.md index 37c16639d174..0081c6b7d932 100644 --- a/keyboards/machine_industries/m4_a/readme.md +++ b/keyboards/machine_industries/m4_a/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/machkeyboards/mach3/readme.md b/keyboards/machkeyboards/mach3/readme.md index 16c61511b192..d4c6f6a65c95 100644 --- a/keyboards/machkeyboards/mach3/readme.md +++ b/keyboards/machkeyboards/mach3/readme.md @@ -13,7 +13,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/makenova/omega/omega4/readme.md b/keyboards/makenova/omega/omega4/readme.md index 0b4db785d536..c736cedc2416 100644 --- a/keyboards/makenova/omega/omega4/readme.md +++ b/keyboards/makenova/omega/omega4/readme.md @@ -20,4 +20,4 @@ Enter the bootloader in 3 ways: - **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard - **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -- **Keycode in layout**: Press the key mapped to `RESET` if it is available +- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/matrix/falcon/readme.md b/keyboards/matrix/falcon/readme.md index c283650fcf59..a2ceb8216385 100644 --- a/keyboards/matrix/falcon/readme.md +++ b/keyboards/matrix/falcon/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard. * **Physical reset button**: Briefly short cut the *RST* pin with the *GND* pin (pin at the topside of the *RST*) on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. \ No newline at end of file diff --git a/keyboards/matrix/me/readme.md b/keyboards/matrix/me/readme.md index 6a39bb0398ba..f04229b2d15a 100644 --- a/keyboards/matrix/me/readme.md +++ b/keyboards/matrix/me/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard. * **Physical reset button**: Briefly short cut the *RST* pin with the *GND* pin (pin at the topside of the *RST*) on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. \ No newline at end of file diff --git a/keyboards/mechanickeys/miniashen40/readme.md b/keyboards/mechanickeys/miniashen40/readme.md index 29f7b68fd109..c61398ba1a46 100644 --- a/keyboards/mechanickeys/miniashen40/readme.md +++ b/keyboards/mechanickeys/miniashen40/readme.md @@ -32,9 +32,9 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical**: 1. Press and hold `BOOT` switch - 2. Tap `RESET` switch + 2. Tap `QK_BOOT` switch 3. Release `BOOT` switch -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## Flash bootloader * [Follow this instructions](https://github.com/jfescobar18/USBaspLoader) diff --git a/keyboards/mechbrewery/mb65h/readme.md b/keyboards/mechbrewery/mb65h/readme.md index e9802152b380..3137cfe0018a 100644 --- a/keyboards/mechbrewery/mb65h/readme.md +++ b/keyboards/mechbrewery/mb65h/readme.md @@ -8,7 +8,7 @@ * Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/mechbrewery/mb65s/readme.md b/keyboards/mechbrewery/mb65s/readme.md index e8505cb6fe55..cacc0fc0c1d8 100644 --- a/keyboards/mechbrewery/mb65s/readme.md +++ b/keyboards/mechbrewery/mb65s/readme.md @@ -8,7 +8,7 @@ * Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/mechlovin/foundation/readme.md b/keyboards/mechlovin/foundation/readme.md index 4a998da039ab..61dacd55bd5c 100644 --- a/keyboards/mechlovin/foundation/readme.md +++ b/keyboards/mechlovin/foundation/readme.md @@ -22,5 +22,5 @@ Enter the bootloader in 4 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Bootloader reset**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * **Hardware reset**: Press reset button (located on the bottom side of the PCB) \ No newline at end of file diff --git a/keyboards/mechlovin/hex4b/rev2/readme.md b/keyboards/mechlovin/hex4b/rev2/readme.md index 328c8697042b..01ae8ea724c8 100644 --- a/keyboards/mechlovin/hex4b/rev2/readme.md +++ b/keyboards/mechlovin/hex4b/rev2/readme.md @@ -24,5 +24,5 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Bootloader reset**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * **Hardware reset**: Press reset button (located on the top side of the PCB) \ No newline at end of file diff --git a/keyboards/mechlovin/infinity875/readme.md b/keyboards/mechlovin/infinity875/readme.md index b3e14a7bb7c0..39c76e5dc949 100644 --- a/keyboards/mechlovin/infinity875/readme.md +++ b/keyboards/mechlovin/infinity875/readme.md @@ -19,6 +19,6 @@ Flashing example for this keyboard: See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). **Reset Key:** 3 ways to put the IF87.5 into bootloader: -- By keycode: Tap RESET keycode. +- By keycode: Press the key mapped to `QK_BOOT` if it is available. - By bootmagic: hold ESC key while plugging in. - By hardware: Push reset button on bottom of the PCB while the PCB is plugged in. \ No newline at end of file diff --git a/keyboards/mechlovin/jay60/readme.md b/keyboards/mechlovin/jay60/readme.md index 79867e5503f9..81f5ae6ed7d8 100644 --- a/keyboards/mechlovin/jay60/readme.md +++ b/keyboards/mechlovin/jay60/readme.md @@ -23,4 +23,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Bootloader reset**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mechlovin/kay60/readme.md b/keyboards/mechlovin/kay60/readme.md index cc53c13175b9..16c8414b3410 100644 --- a/keyboards/mechlovin/kay60/readme.md +++ b/keyboards/mechlovin/kay60/readme.md @@ -22,5 +22,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * **Physic button**: Press reset swith on the bottom of the PCB diff --git a/keyboards/mechlovin/kay65/readme.md b/keyboards/mechlovin/kay65/readme.md index 768ce12aa761..d15317710f53 100644 --- a/keyboards/mechlovin/kay65/readme.md +++ b/keyboards/mechlovin/kay65/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mechlovin/olly/bb/readme.md b/keyboards/mechlovin/olly/bb/readme.md index 0e41a3072f2d..6afdc161ea51 100644 --- a/keyboards/mechlovin/olly/bb/readme.md +++ b/keyboards/mechlovin/olly/bb/readme.md @@ -19,5 +19,5 @@ Flashing example for this keyboard: See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). **Reset Key:** 2 ways to put the Olly JF into bootloader: -By keycode: Tap RESET keycode. +By keycode: Press the key mapped to `QK_BOOT` if it is available. By bootloader: hold ESC key while plugging in \ No newline at end of file diff --git a/keyboards/mechlovin/olly/jf/readme.md b/keyboards/mechlovin/olly/jf/readme.md index 6a6bbc415a53..fe9cf38caddd 100644 --- a/keyboards/mechlovin/olly/jf/readme.md +++ b/keyboards/mechlovin/olly/jf/readme.md @@ -19,6 +19,6 @@ Flashing example for this keyboard: See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). **Reset Key:** 3 ways to put the Olly JF into bootloader: -By keycode: Tap RESET keycode. +By keycode: Press the key mapped to `QK_BOOT` if it is available. By Bootloader: hold ESC key while plugging in (jump to bootloader) By Bootmagic: hold Insert key while pluging in (jump to bootloader and reset EEPROM) \ No newline at end of file diff --git a/keyboards/mechlovin/zed60/readme.md b/keyboards/mechlovin/zed60/readme.md index f740a421a870..d2e76ff55c48 100644 --- a/keyboards/mechlovin/zed60/readme.md +++ b/keyboards/mechlovin/zed60/readme.md @@ -21,7 +21,7 @@ Enter the bootloader in 4 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * **Bootloader**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mechwild/bbs/readme.md b/keyboards/mechwild/bbs/readme.md index b13e8fb54ea3..530717b800ce 100644 --- a/keyboards/mechwild/bbs/readme.md +++ b/keyboards/mechwild/bbs/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (assigned to the top left key) and plug in the keyboard while holding it. * **Physical reset button**: Press and hold the boot0 button on the blackpill, tap and release the nrst button on the blackpill, then release the boot0 button. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. diff --git a/keyboards/mechwild/mokulua/readme.md b/keyboards/mechwild/mokulua/readme.md index a8f2b055dfa4..24f01b10d46d 100644 --- a/keyboards/mechwild/mokulua/readme.md +++ b/keyboards/mechwild/mokulua/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available \ No newline at end of file diff --git a/keyboards/mechwild/puckbuddy/readme.md b/keyboards/mechwild/puckbuddy/readme.md index 1663ad4b9c52..3bf664793227 100644 --- a/keyboards/mechwild/puckbuddy/readme.md +++ b/keyboards/mechwild/puckbuddy/readme.md @@ -22,6 +22,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (assigned to the top left key) and plug in the keyboard while holding it. * **Physical reset button**: Press and hold the boot0 button on the blackpill, tap and release the nrst button on the blackpill, then release the boot0 button. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. By default this is the top right key on layer 1. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. By default this is the top right key on layer 1. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/melgeek/mach80/readme.md b/keyboards/melgeek/mach80/readme.md index f4c8572c4d57..376d179c6598 100755 --- a/keyboards/melgeek/mach80/readme.md +++ b/keyboards/melgeek/mach80/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead * -**Keycode in layout**: Press the key mapped to `RESET` if it is available * +**Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/melgeek/tegic/readme.md b/keyboards/melgeek/tegic/readme.md index da2698e4126f..f6676e1ce419 100755 --- a/keyboards/melgeek/tegic/readme.md +++ b/keyboards/melgeek/tegic/readme.md @@ -18,6 +18,6 @@ Enter the bootloader in 3 ways: **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead * -**Keycode in layout**: Press the key mapped to `RESET` if it is available * +**Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/meow65/readme.md b/keyboards/meow65/readme.md index 734a278082f6..1fe52c3e3640 100644 --- a/keyboards/meow65/readme.md +++ b/keyboards/meow65/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down ESC key (the top left key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/merge/um80/readme.md b/keyboards/merge/um80/readme.md index fe4c5e839254..ad9caf244fb7 100644 --- a/keyboards/merge/um80/readme.md +++ b/keyboards/merge/um80/readme.md @@ -19,4 +19,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the Esc key on the left side or '7' key on the right side and plug in the keyboard. * **Physical reset button**: Briefly press the button on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. \ No newline at end of file diff --git a/keyboards/mikeneko65/readme.md b/keyboards/mikeneko65/readme.md index c14889da7038..4b70fe18a3cf 100644 --- a/keyboards/mikeneko65/readme.md +++ b/keyboards/mikeneko65/readme.md @@ -18,6 +18,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ぶSee the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mincedshon/ecila/readme.md b/keyboards/mincedshon/ecila/readme.md index f7bc47edec16..fcea170710be 100644 --- a/keyboards/mincedshon/ecila/readme.md +++ b/keyboards/mincedshon/ecila/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mino/readme.md b/keyboards/mino/readme.md index a6a725b2a066..e13718b86c43 100644 --- a/keyboards/mino/readme.md +++ b/keyboards/mino/readme.md @@ -14,7 +14,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. For the default keymap it is the middle spacebar on the second layer. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. For the default keymap it is the middle spacebar on the second layer. Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/ml/gas75/readme.md b/keyboards/ml/gas75/readme.md index fcf535038465..8c5854e1d797 100644 --- a/keyboards/ml/gas75/readme.md +++ b/keyboards/ml/gas75/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Esc key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mmkzoo65/readme.md b/keyboards/mmkzoo65/readme.md index 96a699769a88..967201ddc106 100644 --- a/keyboards/mmkzoo65/readme.md +++ b/keyboards/mmkzoo65/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader * **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mntre/readme.md b/keyboards/mntre/readme.md index 4c827aeb255a..685a14089284 100644 --- a/keyboards/mntre/readme.md +++ b/keyboards/mntre/readme.md @@ -23,5 +23,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the "Esc" key and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (default: "Circle" + "R") +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (default: "Circle" + "R") * **Physical reset button**: Remove the keyboard’s frame and toggle the programming DIP switch SW84 on the keyboard to “ON”. Then press the reset button SW83. diff --git a/keyboards/mode/m80v1/readme.md b/keyboards/mode/m80v1/readme.md index 5435a02e61b1..558204b5b7b3 100644 --- a/keyboards/mode/m80v1/readme.md +++ b/keyboards/mode/m80v1/readme.md @@ -17,7 +17,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout) ## Compile firmware diff --git a/keyboards/mode/m80v2/readme.md b/keyboards/mode/m80v2/readme.md index e94984f06b87..b5ea62ec2767 100644 --- a/keyboards/mode/m80v2/readme.md +++ b/keyboards/mode/m80v2/readme.md @@ -17,7 +17,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout) ## Compile firmware diff --git a/keyboards/monoflex60/readme.md b/keyboards/monoflex60/readme.md index cfb4e31d1591..62b609e7c405 100644 --- a/keyboards/monoflex60/readme.md +++ b/keyboards/monoflex60/readme.md @@ -25,5 +25,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -* Keycode in layout: Press the key mapped to RESET if it is available +* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available * Physical reset button: Press the button on the back of the PCB diff --git a/keyboards/morizon/readme.md b/keyboards/morizon/readme.md index 5c95e9788c72..9c509d41ba16 100644 --- a/keyboards/morizon/readme.md +++ b/keyboards/morizon/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key and plug in the keyboard. * **Physical reset button**: Briefly press the button on the top center of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. diff --git a/keyboards/ms_sculpt/readme.md b/keyboards/ms_sculpt/readme.md index c490234de6d8..45db8173b233 100644 --- a/keyboards/ms_sculpt/readme.md +++ b/keyboards/ms_sculpt/readme.md @@ -22,6 +22,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mss_studio/m63_rgb/readme.md b/keyboards/mss_studio/m63_rgb/readme.md index 942b7a60a6e6..33e4f58221d8 100644 --- a/keyboards/mss_studio/m63_rgb/readme.md +++ b/keyboards/mss_studio/m63_rgb/readme.md @@ -21,4 +21,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Esc key) and plug in the keyboard * **Physical reset button**: Press and hold the button on the back of the PCB, then plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mss_studio/m64_rgb/readme.md b/keyboards/mss_studio/m64_rgb/readme.md index 1925622b9cf8..360720b5841d 100644 --- a/keyboards/mss_studio/m64_rgb/readme.md +++ b/keyboards/mss_studio/m64_rgb/readme.md @@ -21,4 +21,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Esc key) and plug in the keyboard * **Physical reset button**: Press and hold the button on the back of the PCB, then plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mwstudio/alicekk/readme.md b/keyboards/mwstudio/alicekk/readme.md index f37629e7bbed..9123a28c40fc 100644 --- a/keyboards/mwstudio/alicekk/readme.md +++ b/keyboards/mwstudio/alicekk/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader * **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mwstudio/mw65_black/readme.md b/keyboards/mwstudio/mw65_black/readme.md index 412746901984..90698c98645b 100644 --- a/keyboards/mwstudio/mw65_black/readme.md +++ b/keyboards/mwstudio/mw65_black/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader * **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mwstudio/mw65_rgb/readme.md b/keyboards/mwstudio/mw65_rgb/readme.md index e15b5f9de9b2..4beb6bd3f505 100644 --- a/keyboards/mwstudio/mw65_rgb/readme.md +++ b/keyboards/mwstudio/mw65_rgb/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader * **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mwstudio/mw75/readme.md b/keyboards/mwstudio/mw75/readme.md index ecabf568aa55..8f946a119f92 100644 --- a/keyboards/mwstudio/mw75/readme.md +++ b/keyboards/mwstudio/mw75/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader * **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mwstudio/mw75r2/readme.md b/keyboards/mwstudio/mw75r2/readme.md index ef2efb3734ce..5492352b2b47 100644 --- a/keyboards/mwstudio/mw75r2/readme.md +++ b/keyboards/mwstudio/mw75r2/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader * **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/nacly/sodium42/readme.md b/keyboards/nacly/sodium42/readme.md index 8e44f510ec16..2e8cc0277434 100644 --- a/keyboards/nacly/sodium42/readme.md +++ b/keyboards/nacly/sodium42/readme.md @@ -15,6 +15,6 @@ Make example for this keyboard (after setting up your build environment): Enter the bootloader in 2 ways: * **Physical reset button**: Press the reset button twice -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/nacly/sodium50/readme.md b/keyboards/nacly/sodium50/readme.md index 8cd5e10e2021..3b41d96b9c6d 100644 --- a/keyboards/nacly/sodium50/readme.md +++ b/keyboards/nacly/sodium50/readme.md @@ -15,6 +15,6 @@ Make example for this keyboard (after setting up your build environment): Enter the bootloader in 2 ways: * **Physical reset button**: Press the reset button twice -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/nacly/sodium62/readme.md b/keyboards/nacly/sodium62/readme.md index 315f6cd9877b..1f600a50c628 100644 --- a/keyboards/nacly/sodium62/readme.md +++ b/keyboards/nacly/sodium62/readme.md @@ -15,7 +15,7 @@ Make example for this keyboard (after setting up your build environment): Enter the bootloader in 2 ways: * **Physical reset button**: Press the reset button twice -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/neopad/readme.md b/keyboards/neopad/readme.md index 9e83e9bb6d10..6d2bd8a2886b 100644 --- a/keyboards/neopad/readme.md +++ b/keyboards/neopad/readme.md @@ -19,7 +19,7 @@ Flashing example for this keyboard: make neopad/rev1:default:flash -When asked by the terminal, press the dedicated `RESET` button (the one above the 2 LEDs) to enter the bootloader and let the OS detects the device. +When asked by the terminal, press the dedicated `QK_BOOT` button (the one above the 2 LEDs) to enter the bootloader and let the OS detects the device. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/neson_design/700e/readme.md b/keyboards/neson_design/700e/readme.md index 902b0709ff4b..8b25d00c2556 100644 --- a/keyboards/neson_design/700e/readme.md +++ b/keyboards/neson_design/700e/readme.md @@ -18,4 +18,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard. * **Physical reset button**: Briefly press the *RST* button on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. \ No newline at end of file diff --git a/keyboards/neson_design/n6/readme.md b/keyboards/neson_design/n6/readme.md index 81ba05be4997..f86668549a7b 100644 --- a/keyboards/neson_design/n6/readme.md +++ b/keyboards/neson_design/n6/readme.md @@ -18,4 +18,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard. * **Physical reset button**: Briefly press the *RST* button on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. \ No newline at end of file diff --git a/keyboards/nix_studio/n60_a/readme.md b/keyboards/nix_studio/n60_a/readme.md index d16d26949936..5a3beb0ee86f 100644 --- a/keyboards/nix_studio/n60_a/readme.md +++ b/keyboards/nix_studio/n60_a/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/noxary/valhalla/readme.md b/keyboards/noxary/valhalla/readme.md index ac053df874c0..36e3403daed0 100644 --- a/keyboards/noxary/valhalla/readme.md +++ b/keyboards/noxary/valhalla/readme.md @@ -17,7 +17,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## Compile firmware diff --git a/keyboards/nullbitsco/tidbit/readme.md b/keyboards/nullbitsco/tidbit/readme.md index f2d0d9934b06..d41ad039c3e7 100644 --- a/keyboards/nullbitsco/tidbit/readme.md +++ b/keyboards/nullbitsco/tidbit/readme.md @@ -17,7 +17,7 @@ Adds experimental "Remote Keyboard" functionality, which forwards keystrokes fro Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/onekeyco/dango40/readme.md b/keyboards/onekeyco/dango40/readme.md index 4b12f5595708..870ba74676b2 100644 --- a/keyboards/onekeyco/dango40/readme.md +++ b/keyboards/onekeyco/dango40/readme.md @@ -9,7 +9,7 @@ ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead - * **Keycode in layout**: Press the key mapped to `RESET` if it is available + * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for flashing this keyboard (after setting up your build environment): diff --git a/keyboards/papercranekeyboards/gerald65/readme.md b/keyboards/papercranekeyboards/gerald65/readme.md index 2dafff9e20f1..0bc610dd11c7 100644 --- a/keyboards/papercranekeyboards/gerald65/readme.md +++ b/keyboards/papercranekeyboards/gerald65/readme.md @@ -22,6 +22,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB (located in the center) -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. To do this, hold down the key to the right of the left spacebar (1u key in the center of bottom row), and then also press the key in the top right (by default, the delete key). +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. To do this, hold down the key to the right of the left spacebar (1u key in the center of bottom row), and then also press the key in the top right (by default, the delete key). See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/paprikman/albacore/readme.md b/keyboards/paprikman/albacore/readme.md index 57c113d42b20..b8dacee6d77e 100644 --- a/keyboards/paprikman/albacore/readme.md +++ b/keyboards/paprikman/albacore/readme.md @@ -21,6 +21,6 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader There are several ways to enter the bootloader: -* **Using keycode**: Press the `RESET` key (if mapped) +* **Using keycode**: Press the `QK_BOOT` key (if mapped) * **Bootmagic reset**: Hold the left bottom key (default mod key) and plug the usb cable * **Physical reset**: In the top right corner of the bottom part of the pcb you will find two pads. Shorten them with tweezers and plug the usb cable, then release. It is also possible to shorten these pads while the macropad is already connected (shorten and hold for a couple of seconds, then release). diff --git a/keyboards/pearlboards/atlas/readme.md b/keyboards/pearlboards/atlas/readme.md index ac02df971b86..5161dd2a553d 100644 --- a/keyboards/pearlboards/atlas/readme.md +++ b/keyboards/pearlboards/atlas/readme.md @@ -18,5 +18,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: -* **Physical reset button**: Briefly press the button on the back of the PCB labeled "RESET" -* **Keycode in layout**: Press the key mapped to `RESET` in conjunction with the key mapped to `MO(1))` +* **Physical reset button**: Briefly press the button on the back of the PCB labeled "QK_BOOT" +* **Keycode in layout**: Press the key mapped to `QK_BOOT` in conjunction with the key mapped to `MO(1))` diff --git a/keyboards/pearlboards/pearl/readme.md b/keyboards/pearlboards/pearl/readme.md index 7679b270b375..e12d59c8b03e 100644 --- a/keyboards/pearlboards/pearl/readme.md +++ b/keyboards/pearlboards/pearl/readme.md @@ -18,5 +18,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: -* **Physical reset button**: Briefly press the button on the front left of the PCB labeled "RESET" -* **Keycode in layout**: Press the key mapped to `RESET` in conjunction with the key mapped to `MO(1))` +* **Physical reset button**: Briefly press the button on the front left of the PCB labeled "QK_BOOT" +* **Keycode in layout**: Press the key mapped to `QK_BOOT` in conjunction with the key mapped to `MO(1))` diff --git a/keyboards/pearlboards/zeus/readme.md b/keyboards/pearlboards/zeus/readme.md index 9d85549d3b8f..2db71d3c6472 100644 --- a/keyboards/pearlboards/zeus/readme.md +++ b/keyboards/pearlboards/zeus/readme.md @@ -18,5 +18,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: -* **Physical reset button**: Briefly press the button on the back of the PCB labeled "RESET" -* **Keycode in layout**: Press the key mapped to `RESET` in conjunction with the key mapped to `MO(1))` +* **Physical reset button**: Briefly press the button on the back of the PCB labeled "QK_BOOT" +* **Keycode in layout**: Press the key mapped to `QK_BOOT` in conjunction with the key mapped to `MO(1))` diff --git a/keyboards/pearlboards/zeuspad/readme.md b/keyboards/pearlboards/zeuspad/readme.md index e22f48e65a53..690af89b799b 100644 --- a/keyboards/pearlboards/zeuspad/readme.md +++ b/keyboards/pearlboards/zeuspad/readme.md @@ -18,5 +18,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: -* **Physical reset button**: Briefly press the button on the front of the PCB labeled "RESET" -* **Keycode in layout**: Press the key mapped to `RESET` in conjunction with the key mapped to `MO(1))` +* **Physical reset button**: Briefly press the button on the front of the PCB labeled "QK_BOOT" +* **Keycode in layout**: Press the key mapped to `QK_BOOT` in conjunction with the key mapped to `MO(1))` diff --git a/keyboards/pegasus/readme.md b/keyboards/pegasus/readme.md index d164ba47aca6..c523c035404f 100644 --- a/keyboards/pegasus/readme.md +++ b/keyboards/pegasus/readme.md @@ -20,4 +20,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/pierce/readme.md b/keyboards/pierce/readme.md index 351bacbfa060..be7ba1948b1c 100644 --- a/keyboards/pierce/readme.md +++ b/keyboards/pierce/readme.md @@ -24,4 +24,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the dongle / wired half -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/pixelspace/capsule65i/readme.md b/keyboards/pixelspace/capsule65i/readme.md index 57587ae74974..a07acf24c8f7 100644 --- a/keyboards/pixelspace/capsule65i/readme.md +++ b/keyboards/pixelspace/capsule65i/readme.md @@ -14,4 +14,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down esc in the keyboard then replug * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` +* **Keycode in layout**: Press the key mapped to `QK_BOOT` diff --git a/keyboards/playkbtw/pk64rgb/readme.md b/keyboards/playkbtw/pk64rgb/readme.md index 29871af7a6f0..c5061bc0cc84 100644 --- a/keyboards/playkbtw/pk64rgb/readme.md +++ b/keyboards/playkbtw/pk64rgb/readme.md @@ -18,7 +18,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available You can get into bootloader by pressing the reset button from the back of PCB. diff --git a/keyboards/polycarbdiet/s20/readme.md b/keyboards/polycarbdiet/s20/readme.md index 7eb2927716bc..e40f999a1c34 100644 --- a/keyboards/polycarbdiet/s20/readme.md +++ b/keyboards/polycarbdiet/s20/readme.md @@ -17,11 +17,11 @@ Flashing example for this keyboard: make polycarbdiet/s20:default:flash **Reset Method:** -- Press the `RESET` button on the under side of the PCB +- Press the `QK_BOOT` button on the under side of the PCB **Bootloader Method:** - Hold down the key located at `K00`, commonly programmed as `ESC`, while plugging in the keyboard. -- Hold down the key located at `K00`, commonly programmed as `ESC`, and press the RESET button on the PCB. +- Hold down the key located at `K00`, commonly programmed as `ESC`, and press the QK_BOOT button on the PCB. - Hold down the key located at `K42` and then press the key located at `K40`. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/primekb/meridian/readme.md b/keyboards/primekb/meridian/readme.md index 01df9c5ba3b4..8e95ae263d9c 100644 --- a/keyboards/primekb/meridian/readme.md +++ b/keyboards/primekb/meridian/readme.md @@ -13,7 +13,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually Escape) and plug in the keyboard; or * **Physical reset button**: press the button on the bottom of the PCB; or -* **Keycode in layout**: press the key mapped to `RESET` if it is available (Escape key on layer 1 in the default layout). +* **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (Escape key on layer 1 in the default layout). ### Compile firmware diff --git a/keyboards/primekb/meridian_rgb/readme.md b/keyboards/primekb/meridian_rgb/readme.md index d07752ae3de1..52457c4f47df 100644 --- a/keyboards/primekb/meridian_rgb/readme.md +++ b/keyboards/primekb/meridian_rgb/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * Physical reset button: Briefly press the button on the back of the PCB -* Keycode in layout: Press the key mapped to RESET if it is available +* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/projectkb/signature65/readme.md b/keyboards/projectkb/signature65/readme.md index 81fd434ff4fc..b6566f0cebd8 100644 --- a/keyboards/projectkb/signature65/readme.md +++ b/keyboards/projectkb/signature65/readme.md @@ -17,4 +17,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset switch/button**: Set the dipswitch to the "on" position. Briefly press the button on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. diff --git a/keyboards/psuieee/pluto12/readme.md b/keyboards/psuieee/pluto12/readme.md index bfdafb3b2d05..d75f768b4122 100644 --- a/keyboards/psuieee/pluto12/readme.md +++ b/keyboards/psuieee/pluto12/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/qpockets/wanten/readme.md b/keyboards/qpockets/wanten/readme.md index 243e949f3440..5215a7d782e3 100644 --- a/keyboards/qpockets/wanten/readme.md +++ b/keyboards/qpockets/wanten/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key or encoder) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/rad/readme.md b/keyboards/rad/readme.md index 3a0fc76230e7..81254ad69e70 100644 --- a/keyboards/rad/readme.md +++ b/keyboards/rad/readme.md @@ -21,4 +21,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,2) in the matrix (top right) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/ramonimbao/mona/v1_1/readme.md b/keyboards/ramonimbao/mona/v1_1/readme.md index b28fedd76c4b..17ae6012bde1 100644 --- a/keyboards/ramonimbao/mona/v1_1/readme.md +++ b/keyboards/ramonimbao/mona/v1_1/readme.md @@ -7,7 +7,7 @@ A gummy-worm o-ring mount 60% marble keyboard. Now with ALPS/MX, Caps Lock LED, * Keyboard Maintainer: [Ramon Imbao](https://github.com/ramonimbao) * Hardware Supported: ATmega32u4 -To get to the bootloader, with the USB cable plugged in, press the `RESET` button on the back of the PCB. +To get to the bootloader, with the USB cable plugged in, press the `QK_BOOT` button on the back of the PCB. Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/ramonimbao/mona/v32a/readme.md b/keyboards/ramonimbao/mona/v32a/readme.md index 61a3deefaa71..f9a730691f83 100644 --- a/keyboards/ramonimbao/mona/v32a/readme.md +++ b/keyboards/ramonimbao/mona/v32a/readme.md @@ -7,7 +7,7 @@ A gummy-worm o-ring mount 60% marble keyboard. Now with ALPS/MX, Caps Lock LED, * Keyboard Maintainer: [Ramon Imbao](https://github.com/ramonimbao) * Hardware Supported: ATmega32A -To get to the bootloader, with the USB cable plugged in, press the `RESET` button on the back of the PCB. +To get to the bootloader, with the USB cable plugged in, press the `QK_BOOT` button on the back of the PCB. Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/ramonimbao/wete/v2/readme.md b/keyboards/ramonimbao/wete/v2/readme.md index 3b33c9bdaa78..d99c61156047 100644 --- a/keyboards/ramonimbao/wete/v2/readme.md +++ b/keyboards/ramonimbao/wete/v2/readme.md @@ -23,4 +23,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the upper left key and plug in the keyboard * **Physical reset button**: Briefly press the reset button on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/redox/readme.md b/keyboards/redox/readme.md index 27333b518c48..82b00d79f7b7 100644 --- a/keyboards/redox/readme.md +++ b/keyboards/redox/readme.md @@ -41,7 +41,7 @@ qmk flash ``` Enter the bootloader when prompted by doing one of the following: * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if you have a layout that has one. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if you have a layout that has one. The WS2812 driver is *untested* on the Proton C, but if you choose to use this feature, you will need to source 5v from the Proton's VUSB pin and not use the PCB's dedicated pin which will be 3v3 *and* follow the [documentation](https://docs.qmk.fm/#/ws2812_driver) to enable the correct driver settings. diff --git a/keyboards/reviung/reviung53/readme.md b/keyboards/reviung/reviung53/readme.md index a2bfbcdbc2c8..2e0ed27e1680 100644 --- a/keyboards/reviung/reviung53/readme.md +++ b/keyboards/reviung/reviung53/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/rgbkb/sol3/readme.md b/keyboards/rgbkb/sol3/readme.md index c896f7c0cd93..8d799bd926d1 100644 --- a/keyboards/rgbkb/sol3/readme.md +++ b/keyboards/rgbkb/sol3/readme.md @@ -22,5 +22,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to To reset the board into bootloader mode, do one of the following: -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (Adjust + R by default) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (Adjust + R by default) * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard (also erases persistent settings) diff --git a/keyboards/ryanskidmore/rskeys100/readme.md b/keyboards/ryanskidmore/rskeys100/readme.md index 4be465dbde57..3100e74f2d02 100644 --- a/keyboards/ryanskidmore/rskeys100/readme.md +++ b/keyboards/ryanskidmore/rskeys100/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader -To enter the bootloader, press the `RESET` button on your daughterboard PCB while it's plugged in. \ No newline at end of file +To enter the bootloader, press the `QK_BOOT` button on your daughterboard PCB while it's plugged in. \ No newline at end of file diff --git a/keyboards/ryloo_studio/m0110/readme.md b/keyboards/ryloo_studio/m0110/readme.md index 78a59f0e624a..8729ef631943 100755 --- a/keyboards/ryloo_studio/m0110/readme.md +++ b/keyboards/ryloo_studio/m0110/readme.md @@ -16,9 +16,9 @@ Flashing example for this keyboard: Putting the Keyboard in Bootloader Mode: -The shipped PCB did not come with a reset button. To put the PCB in bootloader mode: locate the 2 `RESET` pins in the back of the PCB and short them with a conductive wire or tweezer. +The shipped PCB did not come with a reset button. To put the PCB in bootloader mode: locate the 2 `QK_BOOT` pins in the back of the PCB and short them with a conductive wire or tweezer. -![Ryloo Studio M0110 PCB RESET pins location](https://i.imgur.com/QJWmpqF.jpeg) +![Ryloo Studio M0110 PCB QK_BOOT pins location](https://i.imgur.com/QJWmpqF.jpeg) See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/s_ol/0xc_pad/readme.md b/keyboards/s_ol/0xc_pad/readme.md index 8ca3f78d1a4d..b9e75b02e9ab 100644 --- a/keyboards/s_ol/0xc_pad/readme.md +++ b/keyboards/s_ol/0xc_pad/readme.md @@ -18,7 +18,7 @@ following means: - holding down the top-left key (next to the USB port) while plugging it in - bridging the two pads labeled `BOOT` on the back of the PCB with a metallic object (tweezers, paperclip. wire) -- putting the `RESET` keycode in your keymap and pressing the corresponding key +- putting the `QK_BOOT` keycode in your keymap and pressing the corresponding key See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sandwich/keeb68/readme.md b/keyboards/sandwich/keeb68/readme.md index 783d8f00b7ef..0c877fdc2428 100644 --- a/keyboards/sandwich/keeb68/readme.md +++ b/keyboards/sandwich/keeb68/readme.md @@ -23,7 +23,7 @@ Some BIOSs may not detect keypresses properly while NRKO is enabled according to Enter the bootloader in 2 ways (all keys assume default layout): -* **Keycode in layout**: Hold Fn key and press the Windows(GUI) key (mapped to `RESET`) +* **Keycode in layout**: Hold Fn key and press the Windows(GUI) key (mapped to `QK_BOOT`) * **Physical reset button**: Briefly press the button on the back of the PCB (labeled sw1) See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sawnsprojects/amber80/readme.md b/keyboards/sawnsprojects/amber80/readme.md index bc5dd417fcd8..807ba0917fac 100644 --- a/keyboards/sawnsprojects/amber80/readme.md +++ b/keyboards/sawnsprojects/amber80/readme.md @@ -20,6 +20,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/sawnsprojects/amber80/solder/readme.md b/keyboards/sawnsprojects/amber80/solder/readme.md index a429328702d4..094169a22442 100644 --- a/keyboards/sawnsprojects/amber80/solder/readme.md +++ b/keyboards/sawnsprojects/amber80/solder/readme.md @@ -19,6 +19,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sawnsprojects/krush/krush60/readme.md b/keyboards/sawnsprojects/krush/krush60/readme.md index 515040f9044b..6890329c3573 100644 --- a/keyboards/sawnsprojects/krush/krush60/readme.md +++ b/keyboards/sawnsprojects/krush/krush60/readme.md @@ -20,6 +20,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/hotswap/readme.md b/keyboards/sawnsprojects/krush/krush65/hotswap/readme.md index 4a256a2ca5c4..9e2ae1735edf 100644 --- a/keyboards/sawnsprojects/krush/krush65/hotswap/readme.md +++ b/keyboards/sawnsprojects/krush/krush65/hotswap/readme.md @@ -14,7 +14,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/sawnsprojects/krush/krush65/readme.md b/keyboards/sawnsprojects/krush/krush65/readme.md index 34e996f0bf2e..cc2efdfcfe93 100644 --- a/keyboards/sawnsprojects/krush/krush65/readme.md +++ b/keyboards/sawnsprojects/krush/krush65/readme.md @@ -20,6 +20,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/sawnsprojects/vcl65/readme.md b/keyboards/sawnsprojects/vcl65/readme.md index 025c41badf94..d47c145e7953 100644 --- a/keyboards/sawnsprojects/vcl65/readme.md +++ b/keyboards/sawnsprojects/vcl65/readme.md @@ -20,6 +20,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/sawnsprojects/vcl65/solder/readme.md b/keyboards/sawnsprojects/vcl65/solder/readme.md index 06b44ab73084..b168e0e07983 100644 --- a/keyboards/sawnsprojects/vcl65/solder/readme.md +++ b/keyboards/sawnsprojects/vcl65/solder/readme.md @@ -18,6 +18,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the front of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sets3n/kk980/readme.md b/keyboards/sets3n/kk980/readme.md index 0a1142e57106..a238ae05241c 100644 --- a/keyboards/sets3n/kk980/readme.md +++ b/keyboards/sets3n/kk980/readme.md @@ -14,7 +14,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## HEX diff --git a/keyboards/shapeshifter4060/readme.md b/keyboards/shapeshifter4060/readme.md index 2f134ce15b0e..d318502c2086 100644 --- a/keyboards/shapeshifter4060/readme.md +++ b/keyboards/shapeshifter4060/readme.md @@ -26,7 +26,7 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: - **Physical reset button**: Briefly press the button on the top of the PCB -- **Keycode in layout**: Press the key mapped to `RESET` if it is available +- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## Changelog diff --git a/keyboards/skeletonkbd/skeletonnumpad/readme.md b/keyboards/skeletonkbd/skeletonnumpad/readme.md index fc67c79e54f8..538989277a89 100644 --- a/keyboards/skeletonkbd/skeletonnumpad/readme.md +++ b/keyboards/skeletonkbd/skeletonnumpad/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: - **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard - **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -- **Keycode in layout**: Press the key mapped to `RESET` if it is available +- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/skippys_custom_pcs/rooboard65/readme.md b/keyboards/skippys_custom_pcs/rooboard65/readme.md index 63f8217fc8c3..40a23ec12a46 100644 --- a/keyboards/skippys_custom_pcs/rooboard65/readme.md +++ b/keyboards/skippys_custom_pcs/rooboard65/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available \ No newline at end of file diff --git a/keyboards/skippys_custom_pcs/roopad/readme.md b/keyboards/skippys_custom_pcs/roopad/readme.md index e10cc9fb4ff0..89230ddcb144 100644 --- a/keyboards/skippys_custom_pcs/roopad/readme.md +++ b/keyboards/skippys_custom_pcs/roopad/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `QK_BOOT` diff --git a/keyboards/skme/zeno/readme.md b/keyboards/skme/zeno/readme.md index 69a76b57347a..0e71533a896f 100644 --- a/keyboards/skme/zeno/readme.md +++ b/keyboards/skme/zeno/readme.md @@ -28,4 +28,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `QK_BOOT` diff --git a/keyboards/smithrune/iron165r2/readme.md b/keyboards/smithrune/iron165r2/readme.md index 2fc913ff7396..bc41ee4be2db 100644 --- a/keyboards/smithrune/iron165r2/readme.md +++ b/keyboards/smithrune/iron165r2/readme.md @@ -18,7 +18,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key, escape in the default keymap) and plug in the keyboard; * **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds; -* **Keycode in layout**: Press the key mapped to `RESET`; in the default layout, that is top left key ('escape') in layer 1. +* **Keycode in layout**: Press the key mapped to `QK_BOOT`; in the default layout, that is top left key ('escape') in layer 1. ### How to compile and flash diff --git a/keyboards/splitography/readme.md b/keyboards/splitography/readme.md index eeb9b2f40d43..39b09d8d8b22 100644 --- a/keyboards/splitography/readme.md +++ b/keyboards/splitography/readme.md @@ -24,7 +24,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard. * **Physical reset button**: Briefly press the button on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. ## [Guide](https://softhruf.love/pages/guides) diff --git a/keyboards/star75/readme.md b/keyboards/star75/readme.md index 6d7b9b0577f3..5145dc9c4741 100644 --- a/keyboards/star75/readme.md +++ b/keyboards/star75/readme.md @@ -24,5 +24,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/stello65/beta/readme.md b/keyboards/stello65/beta/readme.md index cb2f156ec2eb..67b183008a25 100644 --- a/keyboards/stello65/beta/readme.md +++ b/keyboards/stello65/beta/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/stello65/hs_rev1/readme.md b/keyboards/stello65/hs_rev1/readme.md index 75f83b052cfc..b7f9e7c72630 100644 --- a/keyboards/stello65/hs_rev1/readme.md +++ b/keyboards/stello65/hs_rev1/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/stello65/sl_rev1/readme.md b/keyboards/stello65/sl_rev1/readme.md index 027ab25a3aec..ed36a4e74027 100644 --- a/keyboards/stello65/sl_rev1/readme.md +++ b/keyboards/stello65/sl_rev1/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/studiokestra/bourgeau/readme.md b/keyboards/studiokestra/bourgeau/readme.md index 16f87618e0ef..b0a0bb2a8942 100644 --- a/keyboards/studiokestra/bourgeau/readme.md +++ b/keyboards/studiokestra/bourgeau/readme.md @@ -11,7 +11,7 @@ Compact 75% universal hotswap PCB with USB-C that supports a fixed 6.25U bottom There are 3 ways to put the board in bootloader mode: - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR -- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR +- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR - With the default layout, toggle Layer 1 and press the `ESC` key. ## Compiling Firmware diff --git a/keyboards/studiokestra/cascade/readme.md b/keyboards/studiokestra/cascade/readme.md index db55844ed111..e217b3edeab0 100644 --- a/keyboards/studiokestra/cascade/readme.md +++ b/keyboards/studiokestra/cascade/readme.md @@ -11,7 +11,7 @@ There are 3 ways to put the board in bootloader mode: - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR -- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR +- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR - With the default layout, toggle Layer 1 and press the `ESC` key. ## Compiling Firmware diff --git a/keyboards/studiokestra/galatea/readme.md b/keyboards/studiokestra/galatea/readme.md index 1268c596bf7d..08a6eae011fa 100644 --- a/keyboards/studiokestra/galatea/readme.md +++ b/keyboards/studiokestra/galatea/readme.md @@ -13,7 +13,7 @@ TKL H87/88c compatible PCB with support for the most common layouts. There are 3 ways to put the board in bootloader mode: - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR -- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR +- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR - With the default layout, toggle Layer 1 and press the `R` key. ## Compiling Firmware diff --git a/keyboards/studiokestra/nue/readme.md b/keyboards/studiokestra/nue/readme.md index 42e72902e4dd..f29f27be228b 100644 --- a/keyboards/studiokestra/nue/readme.md +++ b/keyboards/studiokestra/nue/readme.md @@ -11,7 +11,7 @@ There are 3 ways to put the board in bootloader mode: - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR -- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR +- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR - With the default layout, toggle Layer 1 and press the `R` key. ## Compiling Firmware diff --git a/keyboards/subrezon/la_nc/readme.md b/keyboards/subrezon/la_nc/readme.md index 26a7b4d79a28..7031b941fb52 100644 --- a/keyboards/subrezon/la_nc/readme.md +++ b/keyboards/subrezon/la_nc/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/synapse/readme.md b/keyboards/synapse/readme.md index 1e4642881f1d..f98fee8e42be 100644 --- a/keyboards/synapse/readme.md +++ b/keyboards/synapse/readme.md @@ -23,5 +23,5 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * diff --git a/keyboards/synthlabs/solo/readme.md b/keyboards/synthlabs/solo/readme.md index 204bc3857f1c..4e911cecc0c4 100644 --- a/keyboards/synthlabs/solo/readme.md +++ b/keyboards/synthlabs/solo/readme.md @@ -24,5 +24,5 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (1,1) in the matrix (the rotary encoder button) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * diff --git a/keyboards/system76/launch_1/readme.md b/keyboards/system76/launch_1/readme.md index 1dcdeccc394f..f012f861600c 100644 --- a/keyboards/system76/launch_1/readme.md +++ b/keyboards/system76/launch_1/readme.md @@ -58,5 +58,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: - **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Escape) and plug in the keyboard. -- **Keycode in layout**: Press the key mapped to `RESET` in the second layer (Escape). +- **Keycode in layout**: Press the key mapped to `QK_BOOT` in the second layer (Escape). - **Electrical reset**: Briefly short AVR ISP's GND (6) and RST (5) pads on the back of the PCB. diff --git a/keyboards/takashicompany/center_enter/readme.md b/keyboards/takashicompany/center_enter/readme.md index d8db5cc7eb36..1a7f16ac68d6 100644 --- a/keyboards/takashicompany/center_enter/readme.md +++ b/keyboards/takashicompany/center_enter/readme.md @@ -26,4 +26,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/takashicompany/compacx/readme.md b/keyboards/takashicompany/compacx/readme.md index ac5cfee16933..6aca4b45f87d 100644 --- a/keyboards/takashicompany/compacx/readme.md +++ b/keyboards/takashicompany/compacx/readme.md @@ -26,4 +26,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/takashicompany/dogtag/readme.md b/keyboards/takashicompany/dogtag/readme.md index a68ea6f53bec..3947e4b80753 100644 --- a/keyboards/takashicompany/dogtag/readme.md +++ b/keyboards/takashicompany/dogtag/readme.md @@ -34,4 +34,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/takashicompany/heavy_left/readme.md b/keyboards/takashicompany/heavy_left/readme.md index 4cd0e1b0cc56..a048103f849e 100644 --- a/keyboards/takashicompany/heavy_left/readme.md +++ b/keyboards/takashicompany/heavy_left/readme.md @@ -30,4 +30,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/takashicompany/minizone/readme.md b/keyboards/takashicompany/minizone/readme.md index 79f2fef7ad5e..04b6896d2868 100644 --- a/keyboards/takashicompany/minizone/readme.md +++ b/keyboards/takashicompany/minizone/readme.md @@ -50,4 +50,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/takashicompany/qoolee/readme.md b/keyboards/takashicompany/qoolee/readme.md index 35ee431c1cad..55fbff82a28d 100644 --- a/keyboards/takashicompany/qoolee/readme.md +++ b/keyboards/takashicompany/qoolee/readme.md @@ -27,4 +27,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/takashicompany/radialex/readme.md b/keyboards/takashicompany/radialex/readme.md index 1468e7b0b174..2f723ba68694 100644 --- a/keyboards/takashicompany/radialex/readme.md +++ b/keyboards/takashicompany/radialex/readme.md @@ -28,4 +28,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/takashicompany/spreadwriter/readme.md b/keyboards/takashicompany/spreadwriter/readme.md index 972dcba4de87..3cf6eccb5075 100644 --- a/keyboards/takashicompany/spreadwriter/readme.md +++ b/keyboards/takashicompany/spreadwriter/readme.md @@ -32,4 +32,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/teleport/numpad/readme.md b/keyboards/teleport/numpad/readme.md index aebde6f16017..20975b6947bb 100644 --- a/keyboards/teleport/numpad/readme.md +++ b/keyboards/teleport/numpad/readme.md @@ -17,4 +17,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (In this case NumLock) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` (With the default keymap, hold NumLock, then press Enter) \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` (With the default keymap, hold NumLock, then press Enter) \ No newline at end of file diff --git a/keyboards/tkw/grandiceps/readme.md b/keyboards/tkw/grandiceps/readme.md index 57a6dac28d5a..899d0b462d80 100644 --- a/keyboards/tkw/grandiceps/readme.md +++ b/keyboards/tkw/grandiceps/readme.md @@ -30,4 +30,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset buttons**: Hold down the BOOT0 button and then briefly press the NRST button on the BlackPill PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/tominabox1/adalyn/readme.md b/keyboards/tominabox1/adalyn/readme.md index d6292b5cad19..ee4d59bcfa76 100644 --- a/keyboards/tominabox1/adalyn/readme.md +++ b/keyboards/tominabox1/adalyn/readme.md @@ -16,4 +16,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/tominabox1/littlefoot_lx/readme.md b/keyboards/tominabox1/littlefoot_lx/readme.md index 5ef9186347b5..161c15863734 100644 --- a/keyboards/tominabox1/littlefoot_lx/readme.md +++ b/keyboards/tominabox1/littlefoot_lx/readme.md @@ -27,4 +27,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/vertex/angler2/readme.md b/keyboards/vertex/angler2/readme.md index e0b054fbb058..e3de551e37a1 100644 --- a/keyboards/vertex/angler2/readme.md +++ b/keyboards/vertex/angler2/readme.md @@ -14,4 +14,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down esc in the keyboard then replug * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` +* **Keycode in layout**: Press the key mapped to `QK_BOOT` diff --git a/keyboards/vertex/arc60/readme.md b/keyboards/vertex/arc60/readme.md index e5b743332e27..4c8968de6236 100644 --- a/keyboards/vertex/arc60/readme.md +++ b/keyboards/vertex/arc60/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down Enter in the keyboard then replug * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` +* **Keycode in layout**: Press the key mapped to `QK_BOOT` diff --git a/keyboards/viendi8l/readme.md b/keyboards/viendi8l/readme.md index 881300fd832d..12b3c5adc705 100644 --- a/keyboards/viendi8l/readme.md +++ b/keyboards/viendi8l/readme.md @@ -14,7 +14,7 @@ The 8L 80% (60% plus southpaw numpad) keyboard designed by Viendi, with PCB by G * **Bootmagic reset**: hold down the key at (0,0) in the matrix (the encoder push) and plug in the keyboard, waiting for five seconds * **Physical reset button**: press the button on the front of the PCB or use pliers to short the reset contacts, for at least five seconds -* **Keycode in layout**: press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) +* **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout) ## Compile firmware diff --git a/keyboards/viktus/smolka/readme.md b/keyboards/viktus/smolka/readme.md index d01a729ef03a..8c364c36f675 100644 --- a/keyboards/viktus/smolka/readme.md +++ b/keyboards/viktus/smolka/readme.md @@ -27,4 +27,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (1,0) in the matrix (the top key in the macro column) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/wavtype/foundation/readme.md b/keyboards/wavtype/foundation/readme.md index 69f9bd3a0dcd..68ad269d0738 100644 --- a/keyboards/wavtype/foundation/readme.md +++ b/keyboards/wavtype/foundation/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,1) in the matrix (Escape key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to RESET if it is available (by default this is set to "Fn + R") \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (by default this is set to "Fn + R") \ No newline at end of file diff --git a/keyboards/wavtype/p01_ultra/readme.md b/keyboards/wavtype/p01_ultra/readme.md index 69bdba5e7c53..bb9038922794 100644 --- a/keyboards/wavtype/p01_ultra/readme.md +++ b/keyboards/wavtype/p01_ultra/readme.md @@ -20,4 +20,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (this can be set in vial!) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (this can be set in vial!) diff --git a/keyboards/wekey/polaris/readme.md b/keyboards/wekey/polaris/readme.md index 40fcf65bb66e..7810b112ee95 100644 --- a/keyboards/wekey/polaris/readme.md +++ b/keyboards/wekey/polaris/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/wilba_tech/wt65_d/readme.md b/keyboards/wilba_tech/wt65_d/readme.md index 527a824ad183..bbd3bbff81bd 100644 --- a/keyboards/wilba_tech/wt65_d/readme.md +++ b/keyboards/wilba_tech/wt65_d/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/winry/winry315/readme.md b/keyboards/winry/winry315/readme.md index 099e6b42b4a2..48b311e12a47 100644 --- a/keyboards/winry/winry315/readme.md +++ b/keyboards/winry/winry315/readme.md @@ -29,7 +29,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key (not the encoder) and plug in the keyboard. This apparently also works with the vendor VIA firmware. * Note that the bootmagic key does not change with the board orientation configured using `WINRY315_DEFAULT_ORIENTATION` — the “top left” key position in the default orientation (encoders on the top side) is always used. * **Physical reset button**: Briefly press the button on the back of the PCB (the acrylic bottom cover should have a hole to access that button). -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (the default keymap does not have that keycode assigned to any key, but you can use that keycode in your custom keymap if you want to have easier access to the bootloader). +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (the default keymap does not have that keycode assigned to any key, but you can use that keycode in your custom keymap if you want to have easier access to the bootloader). ## Orientation diff --git a/keyboards/wolf/kuku65/readme.md b/keyboards/wolf/kuku65/readme.md index 34c4f3342281..6cb263a11800 100644 --- a/keyboards/wolf/kuku65/readme.md +++ b/keyboards/wolf/kuku65/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `QK_BOOT` diff --git a/keyboards/wolf/ryujin/readme.md b/keyboards/wolf/ryujin/readme.md index bc9713563a14..3f0e0a35e927 100644 --- a/keyboards/wolf/ryujin/readme.md +++ b/keyboards/wolf/ryujin/readme.md @@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `QK_BOOT` diff --git a/keyboards/wolf/sabre/readme.md b/keyboards/wolf/sabre/readme.md index b06217d0eef4..694b3e584acf 100644 --- a/keyboards/wolf/sabre/readme.md +++ b/keyboards/wolf/sabre/readme.md @@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `QK_BOOT` diff --git a/keyboards/wolf/ts60/readme.md b/keyboards/wolf/ts60/readme.md index 6883617cb180..5f1d64937b57 100644 --- a/keyboards/wolf/ts60/readme.md +++ b/keyboards/wolf/ts60/readme.md @@ -22,4 +22,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the Enter key on layer 1 which is mapped to `RESET` \ No newline at end of file +* **Keycode in layout**: Press the Enter key on layer 1 which is mapped to `QK_BOOT` \ No newline at end of file diff --git a/keyboards/wren/readme.md b/keyboards/wren/readme.md index 8de95734d612..233a74d48923 100644 --- a/keyboards/wren/readme.md +++ b/keyboards/wren/readme.md @@ -24,4 +24,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the front of the PCB below the microcontroler -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/yandrstudio/nz64/readme.md b/keyboards/yandrstudio/nz64/readme.md index ca52d65ee941..f495839aa386 100644 --- a/keyboards/yandrstudio/nz64/readme.md +++ b/keyboards/yandrstudio/nz64/readme.md @@ -19,4 +19,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key which is Escape in this keyboard) and plug in the keyboard * **Physical reset pins**: Short circuit the `bt0` and `vcc` pins on the back of the PCB and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. diff --git a/keyboards/yandrstudio/zhou65/readme.md b/keyboards/yandrstudio/zhou65/readme.md index 31f57f2f96e8..802943ae3958 100644 --- a/keyboards/yandrstudio/zhou65/readme.md +++ b/keyboards/yandrstudio/zhou65/readme.md @@ -19,4 +19,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key which is Escape in this keyboard) and plug in the keyboard * **Physical reset pins**: Short circuit the `bt0` and `vcc` pins on the back of the PCB and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. diff --git a/keyboards/ydkb/just60/readme.md b/keyboards/ydkb/just60/readme.md index 1fe05bd3eaac..76eee5dcedff 100644 --- a/keyboards/ydkb/just60/readme.md +++ b/keyboards/ydkb/just60/readme.md @@ -2,7 +2,7 @@ Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io. -To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `RESET`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`. +To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `QK_BOOT`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`. Backlight LEDs and Bluetooth are not working yet. diff --git a/keyboards/ymdk/ymd21/v2/readme.md b/keyboards/ymdk/ymd21/v2/readme.md index 8a7968e34653..9ca3b1390fb2 100644 --- a/keyboards/ymdk/ymd21/v2/readme.md +++ b/keyboards/ymdk/ymd21/v2/readme.md @@ -22,6 +22,6 @@ Enter the bootloader using one of the following methods: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/yushakobo/navpad/10/readme.md b/keyboards/yushakobo/navpad/10/readme.md index a330003a55f0..231e44972116 100644 --- a/keyboards/yushakobo/navpad/10/readme.md +++ b/keyboards/yushakobo/navpad/10/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/yushakobo/navpad/10_helix_r/readme.md b/keyboards/yushakobo/navpad/10_helix_r/readme.md index 99fa83c62da4..6d8a64c2bc47 100644 --- a/keyboards/yushakobo/navpad/10_helix_r/readme.md +++ b/keyboards/yushakobo/navpad/10_helix_r/readme.md @@ -30,4 +30,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/ziggurat/readme.md b/keyboards/ziggurat/readme.md index 85f88b536177..0b1330fcd4a8 100644 --- a/keyboards/ziggurat/readme.md +++ b/keyboards/ziggurat/readme.md @@ -22,4 +22,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * **Bootmagic reset**: Hold down the top left key and plug in the keyboard * **Physical reset button**: Press the button labeled "SW1" on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available