CMakeLists.txt

# Copyright (C) 2013 - 2022 by the authors of the ASPECT code.
#
# This file is part of ASPECT.
#
# ASPECT is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# ASPECT is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with ASPECT; see the file doc/COPYING.  If not see
# <http://www.gnu.org/licenses/>.

CMAKE_MINIMUM_REQUIRED(VERSION 3.1.0)

MESSAGE(STATUS "====================================================")
MESSAGE(STATUS "============ Configuring ASPECT ====================")
MESSAGE(STATUS "====================================================")

IF (EXISTS ${CMAKE_SOURCE_DIR}/CMakeCache.txt)
  MESSAGE(FATAL_ERROR  "Detected the file\n"
  "${CMAKE_SOURCE_DIR}/CMakeCache.txt\n"
  "in your source directory, which is a left-over from an in-source build. "
  "Please delete the file before running cmake from a separate build directory.")
ENDIF()

IF ("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}")
  MESSAGE(FATAL_ERROR  "ASPECT does not support in-source builds in ${CMAKE_BINARY_DIR}. "
  "Please run cmake from a separate build directory."
  "\n"
  "Note that CMake created a file called CMakeCache.txt and a folder called "
  "CMakeFiles in the source directory that you have to remove before you can "
  "begin a build in a different directory.")
ENDIF()

# Set the name of the project and target:
SET(TARGET "aspect")

FILE(GLOB_RECURSE TARGET_SRC
     "source/*.cc" "unit_tests/*.cc" "include/*.h" "contrib/catch/catch.hpp")

# Special treatment of some files for unity builds. We move the following
# files to the end of the list of all .cc files (TARGET_SRC). This ordering is
# required to not have specializations (for example helper_functions.cc)
# appear after explicit class instantiation (for example core.cc) of the same
# class that happen to be included in the same unity cxx file.
SET(UNITY_LAST_FILES
  "source/simulator/core.cc;source/volume_of_fluid/handler.cc")

FOREACH(_source_file ${UNITY_LAST_FILES})
  SET(_full_name "${CMAKE_SOURCE_DIR}/${_source_file}")
  LIST(FIND TARGET_SRC ${_full_name} _index)
  IF(_index EQUAL -1)
    MESSAGE(FATAL_ERROR "could not find ${_full_name}.")
  ENDIF()

  LIST(REMOVE_ITEM TARGET_SRC ${_full_name})
  LIST(APPEND TARGET_SRC ${_full_name})
ENDFOREACH()

# Set up include directories. Put the ASPECT header files
# to the front of the list, whereas the 'catch' headers can
# be preempted by the system
INCLUDE_DIRECTORIES(BEFORE ${CMAKE_BINARY_DIR}/include include)
INCLUDE_DIRECTORIES(AFTER  contrib/catch)

set(CMAKE_EXPORT_COMPILE_COMMANDS ON)

LIST(APPEND CMAKE_MODULE_PATH
  ${CMAKE_SOURCE_DIR}
  ${CMAKE_SOURCE_DIR}/cmake/modules
  )

FIND_PACKAGE(deal.II 9.3.0 QUIET
  HINTS ${deal.II_DIR} ${DEAL_II_DIR} $ENV{DEAL_II_DIR}
  )
IF(NOT ${deal.II_FOUND})
  MESSAGE(FATAL_ERROR "\n*** Could not find a suitably recent version of deal.II. ***\n"
    "You may want to either pass a flag -DDEAL_II_DIR=/path/to/deal.II to cmake "
    "or set an environment variable \"DEAL_II_DIR\" that contains a path to a "
    "sufficiently recent version of deal.II."
    )
ENDIF()

MESSAGE(STATUS "Found deal.II version ${DEAL_II_PACKAGE_VERSION} at '${deal.II_DIR}'")

IF(NOT DEAL_II_WITH_CXX11)
  MESSAGE(FATAL_ERROR "\n*** ASPECT requires C++11 but your version of deal.II is not "
    "configured with it. This likely means that your compiler is too old. Check "
    "DEAL_II_WITH_CXX11 in deal.II.")
ENDIF()

SET(_DEALII_GOOD ON)

IF(NOT DEAL_II_WITH_P4EST)
    MESSAGE(SEND_ERROR
      "\n-- deal.II was built without support for p4est!\n"
      )
    SET(_DEALII_GOOD OFF)
ENDIF()

IF(NOT DEAL_II_WITH_TRILINOS)
    MESSAGE(SEND_ERROR
      "\n-- deal.II was built without support for Trilinos!\n"
      )
    SET(_DEALII_GOOD OFF)
ENDIF()

IF (NOT _DEALII_GOOD)
  MESSAGE(FATAL_ERROR
    "\nASPECT requires a deal.II installation built with support for Trilinos and p4est but one or both of these appears to be missing!\n"
    )
ENDIF()

DEAL_II_INITIALIZE_CACHED_VARIABLES()
PROJECT(${TARGET} CXX)

SET(FORCE_COLORED_OUTPUT ON CACHE BOOL "Forces colored ouput when compiling with gcc and clang.")

SET(ASPECT_WITH_WORLD_BUILDER ON CACHE BOOL "Whether to enable compiling aspect with the Geodynamic World Builder.")
MESSAGE(STATUS "ASPECT_WITH_WORLD_BUILDER = '${ASPECT_WITH_WORLD_BUILDER}'")
if(ASPECT_WITH_WORLD_BUILDER)
  # Check whether we can find the WorldBuilder.
  SET(WORLD_BUILDER_SOURCE_DIR "" CACHE PATH "Provide an external World Builder directory to be compiled with ASPECT. If the path is not provided or the World Builder is not found in the provided location, the version in the contrib folder is used.")
  IF (NOT EXISTS ${WORLD_BUILDER_SOURCE_DIR}/VERSION)
    MESSAGE(STATUS "World Builder not found. Using internal version.")
    SET(WORLD_BUILDER_SOURCE_DIR "${CMAKE_SOURCE_DIR}/contrib/world_builder/" CACHE PATH "" FORCE)
  ENDIF()

  # Always include the header files.
  INCLUDE_DIRECTORIES("${WORLD_BUILDER_SOURCE_DIR}/include/")

  INCLUDE("${WORLD_BUILDER_SOURCE_DIR}/cmake/version.cmake")
  MESSAGE(STATUS "Using World Builder version ${WORLD_BUILDER_VERSION} found at ${WORLD_BUILDER_SOURCE_DIR}.")

  # add source and include dirs:
  FILE(GLOB_RECURSE wb_files "${WORLD_BUILDER_SOURCE_DIR}/source/*.cc")
  LIST(APPEND TARGET_SRC ${wb_files})

  # generate config.cc and include it:
  CONFIGURE_FILE("${WORLD_BUILDER_SOURCE_DIR}/source/config.cc.in" "${CMAKE_BINARY_DIR}/world_builder_config.cc" @ONLY)
  LIST(INSERT TARGET_SRC 0 "${CMAKE_BINARY_DIR}/world_builder_config.cc")

  # Move some file to the end for unity builds to make sure other file come
  # "before". Note: The current design keeps all ASPECT files (including
  # ASPECT_UNITY_LAST files) before all GWB files. Mixing them will causes
  # many issues with non-unique namespace names like Utilities.
  SET(UNITY_WB_LAST_FILES
  "${WORLD_BUILDER_SOURCE_DIR}/source/parameters.cc")

  FOREACH(_source_file ${UNITY_WB_LAST_FILES})
    LIST(FIND TARGET_SRC ${_source_file} _index)
    IF(_index EQUAL -1)
      MESSAGE(FATAL_ERROR "could not find ${_source_file}.")
    ENDIF()

    LIST(REMOVE_ITEM TARGET_SRC ${_source_file})
    LIST(APPEND TARGET_SRC ${_source_file})
  ENDFOREACH()

  FOREACH(_source_file ${wb_files})
    # exclude the world builder files from including precompiled headers, they
    # do not include ASPECT's dependencies at all.
    SET_PROPERTY(SOURCE ${_source_file} PROPERTY COTIRE_EXCLUDED TRUE )
    SET_PROPERTY(SOURCE ${_source_file} PROPERTY SKIP_PRECOMPILE_HEADERS TRUE )
    # Temporarily disable world builder unity builds:
    SET_PROPERTY(SOURCE ${_source_file} PROPERTY SKIP_UNITY_BUILD_INCLUSION TRUE )
  ENDFOREACH()

  SET_PROPERTY(SOURCE "${CMAKE_BINARY_DIR}/world_builder_config.cc" PROPERTY COTIRE_EXCLUDED TRUE )
  SET_PROPERTY(SOURCE "${CMAKE_BINARY_DIR}/world_builder_config.cc" PROPERTY SKIP_PRECOMPILE_HEADERS TRUE )
ENDIF()



# load in version info and export it
FILE(STRINGS "${CMAKE_SOURCE_DIR}/VERSION" ASPECT_PACKAGE_VERSION LIMIT_COUNT 1)

INCLUDE(${CMAKE_SOURCE_DIR}/cmake/macro_aspect_query_git_information.cmake)
ASPECT_QUERY_GIT_INFORMATION("ASPECT")
CONFIGURE_FILE(${CMAKE_SOURCE_DIR}/include/aspect/revision.h.in ${CMAKE_BINARY_DIR}/include/aspect/revision.h @ONLY)

INCLUDE(CMakePackageConfigHelpers)
WRITE_BASIC_PACKAGE_VERSION_FILE(
  "${CMAKE_BINARY_DIR}/AspectConfigVersion.cmake"
  VERSION ${ASPECT_PACKAGE_VERSION}
  COMPATIBILITY AnyNewerVersion
)

# Configure a cmake fragment that plugins can use to
# set up compiler flags, include paths, etc to compile an
# ASPECT plugin.
# Config for the build dir:
SET(CONFIG_INCLUDE_DIRS "${CMAKE_BINARY_DIR}/include" "${CMAKE_SOURCE_DIR}/include")
SET(CONFIG_DIR "${CMAKE_BINARY_DIR}")
CONFIGURE_FILE(
  ${CMAKE_SOURCE_DIR}/cmake/AspectConfig.cmake.in
  ${CMAKE_BINARY_DIR}/AspectConfig.cmake
  @ONLY
)
# Config for the install dir:
SET(CONFIG_INCLUDE_DIRS "${CMAKE_INSTALL_PREFIX}/include")
SET(CONFIG_DIR "${CMAKE_INSTALL_PREFIX}/bin")
CONFIGURE_FILE(
  ${CMAKE_SOURCE_DIR}/cmake/AspectConfig.cmake.in
  ${CMAKE_BINARY_DIR}/forinstall/AspectConfig.cmake
  @ONLY
)

# Next, set up the testsuite

SET(ASPECT_RUN_ALL_TESTS OFF CACHE BOOL "Set up complete test suite to run.")
SET(ASPECT_NEED_TEST_CONFIGURE ON CACHE BOOL "If true, reconfigure test project.")
SET(ASPECT_COMPARE_TEST_RESULTS ON CACHE BOOL "Compare test results with high accuracy.")

CONFIGURE_FILE(
  ${CMAKE_SOURCE_DIR}/tests/cmake/CTestCustom.ctest.in
  ${CMAKE_BINARY_DIR}/CTestCustom.ctest
  @ONLY
)
CONFIGURE_FILE(
  ${CMAKE_SOURCE_DIR}/tests/cmake/print_test_info.sh
  ${CMAKE_BINARY_DIR}/print_test_info.sh
  @ONLY
)

# enable all tests and force a re-run of the cmake configuration in the test/ folder:
ADD_CUSTOM_TARGET(setup_tests
  COMMAND ${CMAKE_COMMAND} -D ASPECT_RUN_ALL_TESTS=ON -D ASPECT_NEED_TEST_CONFIGURE=ON . >/dev/null
  WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
  COMMENT "Enabling all tests ...")

# Disable the ability to run all tests in an in-source build:
IF (("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}") AND ASPECT_RUN_ALL_TESTS)
  SET(ASPECT_RUN_ALL_TESTS OFF CACHE BOOL "" FORCE)
  MESSAGE(FATAL_ERROR "\nEnabling all tests is not supported in in-source builds. Please create a separate build directory!\n")
ENDIF()


SET(ASPECT_TEST_GENERATOR "Unix Makefiles" CACHE STRING
  "Generator to use for the test cmake project. Using ninja instead of make is not recommended.")


# Allow us to make a global "test" target:
IF(POLICY CMP0037)
  # allow to override "test" target
  CMAKE_POLICY(SET CMP0037 OLD)
ENDIF()

# This is an empty target but we will make it depend on tests/ and unit_tests/ next:
ADD_CUSTOM_TARGET(test)

# Generate CTestTestfile.cmake in the main build folder that lists all subfolders
# that contain tests. This way you can call "ctest" in the build directory.
FILE(WRITE ${CMAKE_BINARY_DIR}/CTestTestfile.cmake "# auto-generated ctest file\n")

IF(EXISTS ${CMAKE_SOURCE_DIR}/unit_tests/CMakeLists.txt)
  # If we have the unit_tests directory, add it so ctest picks it up and configure
  # the test project in the subfolder:
  FILE(APPEND ${CMAKE_BINARY_DIR}/CTestTestfile.cmake "SUBDIRS(unit_tests)\n")
  FILE(MAKE_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/unit_tests)
  EXECUTE_PROCESS(
    COMMAND ${CMAKE_COMMAND}
        -D CMAKE_BUILD_TYPE=${CMAKE_BUILD_TYPE}
        -D ASPECT_BINARY=${CMAKE_BINARY_DIR}/aspect
        ${CMAKE_CURRENT_SOURCE_DIR}/unit_tests
    OUTPUT_FILE setup_unit_tests.log
    RESULT_VARIABLE test_cmake_result
    WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/unit_tests
   )
  IF(NOT test_cmake_result EQUAL 0)
    MESSAGE(FATAL_ERROR "ERROR: unittest/ project could not be configured.")
  ENDIF()

  # Finally hook up that "make test" will execute the tests:
  ADD_CUSTOM_TARGET(run_unit_tests
    COMMAND ${CMAKE_BINARY_DIR}/aspect --test
    WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/unit_tests
    DEPENDS aspect
    COMMENT "Running unit_tests ...")

  ADD_DEPENDENCIES(test run_unit_tests)
ENDIF()

IF(EXISTS ${CMAKE_SOURCE_DIR}/tests/CMakeLists.txt)
  # Hook up the tests:
  FILE(APPEND ${CMAKE_BINARY_DIR}/CTestTestfile.cmake "SUBDIRS(tests)\n")
ENDIF()

IF(EXISTS ${CMAKE_SOURCE_DIR}/tests/CMakeLists.txt
  AND ${ASPECT_NEED_TEST_CONFIGURE})

  FILE(MAKE_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/tests)

  SET(aspect_binary ${CMAKE_BINARY_DIR}/aspect)

  # set a flag so we don't need to rerun this configuration step every time:
  SET(ASPECT_NEED_TEST_CONFIGURE OFF CACHE BOOL "" FORCE)

  MESSAGE(STATUS "Setting up test project, see tests/setup_tests.log for details.")
  EXECUTE_PROCESS(
    COMMAND ${CMAKE_COMMAND} -G ${ASPECT_TEST_GENERATOR}
        -D ASPECT_RUN_ALL_TESTS=${ASPECT_RUN_ALL_TESTS}
        -D ASPECT_COMPARE_TEST_RESULTS=${ASPECT_COMPARE_TEST_RESULTS}
        -D Aspect_DIR=${CMAKE_BINARY_DIR}
        -D CMAKE_BUILD_TYPE=${CMAKE_BUILD_TYPE}
        -D ASPECT_BINARY=${aspect_binary}
        ${CMAKE_CURRENT_SOURCE_DIR}/tests
    OUTPUT_FILE setup_tests.log
    RESULT_VARIABLE test_cmake_result
    WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/tests
   )
  IF(NOT test_cmake_result EQUAL 0)
    MESSAGE(FATAL_ERROR "ERROR: tests/ project could not be configured.")
  ENDIF()

  # Finally hook up that "make test" will execute the tests:
  ADD_CUSTOM_TARGET(run_tests
    COMMAND ${CMAKE_COMMAND} --build . --target test
    WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/tests
    DEPENDS aspect
    COMMENT "Running tests ...")

  ADD_DEPENDENCIES(test run_tests)
ENDIF()

# Provide the "generate_reference_output" target:
ADD_CUSTOM_TARGET(generate_reference_output
  COMMAND ${CMAKE_CURRENT_SOURCE_DIR}/cmake/generate_reference_output.sh
  WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR})


# Provide "indent" target for indenting all headers and source files
ADD_CUSTOM_TARGET(indent
  WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
  COMMAND ./contrib/utilities/indent
  COMMENT "Indenting all ASPECT header and source files..."
  )

IF(CMAKE_GENERATOR MATCHES "Ninja")
  SET(_make_command "$ ninja")
ELSE()
  SET(_make_command " $ make")
ENDIF()

# Provide "release" and "debug" targets to switch compile mode
IF(${DEAL_II_BUILD_TYPE} MATCHES "DebugRelease")
ADD_CUSTOM_TARGET(release
  COMMAND ${CMAKE_COMMAND} -D CMAKE_BUILD_TYPE=Release .
  COMMAND ${CMAKE_COMMAND} -E echo "***"
  COMMAND ${CMAKE_COMMAND} -E echo "*** Switched to Release mode. Now recompile with: ${_make_command}"
  COMMAND ${CMAKE_COMMAND} -E echo "***"
  WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
  VERBATIM
  COMMENT "switching to RELEASE mode..."
  )
ADD_CUSTOM_TARGET(debug
  COMMAND ${CMAKE_COMMAND} -D CMAKE_BUILD_TYPE=Debug .
  COMMAND ${CMAKE_COMMAND} -E echo "***"
  COMMAND ${CMAKE_COMMAND} -E echo "*** Switched to Debug mode. Now recompile with: ${_make_command}"
  COMMAND ${CMAKE_COMMAND} -E echo "***"
  WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
  VERBATIM
  COMMENT "switching to DEBUG mode..."
  )
ENDIF()

# Provide a "distclean" target (like it is done in deal.II):
ADD_CUSTOM_TARGET(distclean
  COMMAND ${CMAKE_COMMAND} --build ${CMAKE_BINARY_DIR} --target clean
  COMMAND ${CMAKE_COMMAND} -E remove_directory CMakeFiles
  COMMAND ${CMAKE_COMMAND} -E remove
    CMakeCache.txt cmake_install.cmake Makefile
    build.ninja rules.ninja .ninja_deps .ninja_log
  COMMENT "distclean invoked"
  )



FILE(WRITE ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/print_usage.cmake
"MESSAGE(
\"###
#
#  Project ${TARGET} set up with  ${DEAL_II_PACKAGE_NAME}-${DEAL_II_PACKAGE_VERSION}  found at
#      ${DEAL_II_PATH}
#
#  CMAKE_BUILD_TYPE:          ${CMAKE_BUILD_TYPE}
#
#  You can now run
#      ${_make_command}                - to compile and link ${TARGET}
#      ${_make_command} debug          - to switch the build type to 'Debug'
#      ${_make_command} release        - to switch the build type to 'Release'
#      ${_make_command} clean          - to remove the generated executable as well as
#                               all intermediate compilation files
#      ${_make_command} distclean      - to clean the directory from all generated
#                               files (includes clean, runclean and the removal
#                               of the generated build system)
#      ${_make_command} setup_tests    - enable all tests and re-run test detection
#      ${_make_command} indent         - fix indentation of all source files
#      ${_make_command} info           - to view this message again
\")")

# Provide "info" target
ADD_CUSTOM_TARGET(info
  COMMAND ${CMAKE_COMMAND} -P ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/print_usage.cmake
  )


# Depending on whether we link statically or allow for shared libs,
# we can or can not load plugins via external shared libs. Pass this
# down during compilation so we can disable it in the code
SET(ASPECT_USE_SHARED_LIBS ON CACHE BOOL "If ON, we support loading shared plugin files.")
IF (DEAL_II_STATIC_EXECUTABLE STREQUAL "ON")
  MESSAGE(STATUS "Creating a statically linked executable")
  SET(ASPECT_USE_SHARED_LIBS OFF CACHE BOOL "" FORCE)
ENDIF()

INCLUDE (CheckCXXSourceCompiles)

SET(_backup_libs ${CMAKE_REQUIRED_LIBRARIES})
LIST(APPEND CMAKE_REQUIRED_LIBRARIES ${CMAKE_DL_LIBS})
CHECK_CXX_SOURCE_COMPILES("
#include <cstddef>
#include <dlfcn.h>

int main()
{
  void *handle = dlopen (\"somelib.so\", RTLD_LAZY);
  return handle == NULL || dlerror();
}
" HAVE_DLOPEN)
SET(CMAKE_REQUIRED_LIBRARIES ${_backup_libs})

IF (NOT HAVE_DLOPEN)
  MESSAGE(STATUS "dlopen() test failed, disabling dynamic plugin loading")
  SET(ASPECT_USE_SHARED_LIBS OFF CACHE BOOL "" FORCE)
ENDIF()

IF (ASPECT_USE_SHARED_LIBS)
  MESSAGE(STATUS "Enabling dynamic loading of plugins from the input file")
ELSE()
  MESSAGE(STATUS "Disabling dynamic loading of plugins from the input file")
ENDIF()

# See whether we can verify that every plugin we load is compiled against
# the same deal.II library
SET(ASPECT_HAVE_LINK_H ON CACHE BOOL "If ON, link.h exists and is usable.")
INCLUDE (CheckIncludeFileCXX)
CHECK_INCLUDE_FILE_CXX ("link.h" _HAVE_LINK_H)
IF (NOT _HAVE_LINK_H)
  SET(ASPECT_HAVE_LINK_H OFF CACHE BOOL "" FORCE)
ENDIF()
IF (ASPECT_HAVE_LINK_H)
  MESSAGE(STATUS "Enabling checking of compatible deal.II library when loading plugins")
ENDIF()

if (${FORCE_COLORED_OUTPUT})
  if(CMAKE_CXX_COMPILER_ID MATCHES "Clang" OR CMAKE_CXX_COMPILER MATCHES "AppleClang")
    STRING(APPEND DEAL_II_CXX_FLAGS_DEBUG " -fcolor-diagnostics")
    STRING(APPEND DEAL_II_CXX_FLAGS_RELEASE " -fcolor-diagnostics")
  elseif(CMAKE_CXX_COMPILER_ID MATCHES "GNU")
    STRING(APPEND DEAL_II_CXX_FLAGS_DEBUG " -fdiagnostics-color=always")
    STRING(APPEND DEAL_II_CXX_FLAGS_RELEASE " -fdiagnostics-color=always")
  endif()
endif()

SET(ASPECT_ADDITIONAL_CXX_FLAGS "" CACHE STRING "Additional CMAKE_CXX_FLAGS applied after the deal.II options.")

IF(NOT ASPECT_ADDITIONAL_CXX_FLAGS STREQUAL "")
  MESSAGE(STATUS "Appending ASPECT_ADDITIONAL_CXX_FLAGS: '${ASPECT_ADDITIONAL_CXX_FLAGS}':")
  STRING(APPEND DEAL_II_CXX_FLAGS_DEBUG " ${ASPECT_ADDITIONAL_CXX_FLAGS}")
  STRING(APPEND DEAL_II_CXX_FLAGS_RELEASE " ${ASPECT_ADDITIONAL_CXX_FLAGS}")
  MESSAGE(STATUS "  DEAL_II_CXX_FLAGS_DEBUG: ${DEAL_II_CXX_FLAGS_DEBUG}")
  MESSAGE(STATUS "  DEAL_II_CXX_FLAGS_RELEASE: ${DEAL_II_CXX_FLAGS_RELEASE}")
ENDIF()

ADD_EXECUTABLE(${TARGET} ${TARGET_SRC})
DEAL_II_SETUP_TARGET(${TARGET})

# deal.II does not define NDEBUG, but the world builder relies on it to disable
# its asserts in release mode. Set it manually for anything but debug mode.
# Note: If deal.II decides in the future to define this, this can be removed.
IF (NOT CMAKE_BUILD_TYPE MATCHES Debug)
    ADD_DEFINITIONS("-DNDEBUG")
ENDIF()

# find zlib if it is installed in a non-standard location
SET(ZLIB_DIR "" CACHE PATH "An optional hint to a ZLIB installation")
IF("${ZLIB_DIR}" STREQUAL "")
  SET(ZLIB_DIR "$ENV{ZLIB_DIR}" CACHE PATH "An optional hint to a ZLIB installation" FORCE)
ENDIF()
FIND_PACKAGE(ZLIB)
INCLUDE_DIRECTORIES(${ZLIB_INCLUDE_DIR})
TARGET_LINK_LIBRARIES(${TARGET} ${ZLIB_LIBRARY})

FIND_PACKAGE(PerpleX QUIET
  HINTS ./contrib/perplex/install/ ../ ../../ ${PERPLEX_DIR} $ENV{PERPLEX_DIR})
IF(${PerpleX_FOUND})
  MESSAGE(STATUS "PerpleX found at ${PerpleX_INCLUDE_DIR}")
  INCLUDE_DIRECTORIES(${PerpleX_INCLUDE_DIR})
  TARGET_LINK_LIBRARIES(${TARGET} ${PerpleX_LIBRARIES})
  SET(ASPECT_WITH_PERPLEX ON)
ELSE()
  SET(ASPECT_WITH_PERPLEX OFF)
ENDIF()


# Find the libdap package so that ASPECT can connect to the OPeNDAP servers
# Author: Kodi Neumiller
SET(ASPECT_WITH_LIBDAP OFF CACHE BOOL "Check if the user wants to compile ASPECT with the libdap libraries.")
MESSAGE(STATUS "Using ASPECT_WITH_LIBDAP = '${ASPECT_WITH_LIBDAP}'")
IF(ASPECT_WITH_LIBDAP)
  FIND_PACKAGE(LIBDAP)
  IF(${LIBDAP_FOUND})
    INCLUDE_DIRECTORIES(${LIBDAP_INCLUDE_DIRS})
    TARGET_LINK_LIBRARIES(${TARGET} ${LIBDAP_LIBRARIES})
    MESSAGE(STATUS "LIBDAP found at ${LIBDAP_LIBRARY}\n")
  ELSE()
    MESSAGE(FATAL_ERROR "LIBDAP not found. Disable ASPECT_WITH_LIBDAP or specify a hint to your installation directory with LIBDAP_DIR.")
  ENDIF()
ENDIF()

#
# NETCDF (c including parallel)
#
SET(ASPECT_WITH_NETCDF OFF CACHE BOOL "Check if the user wants to compile ASPECT with the NETCDF libraries.")

MESSAGE(STATUS "Using ASPECT_WITH_NETCDF = '${ASPECT_WITH_NETCDF}'")

IF(ASPECT_WITH_NETCDF)
  FIND_PACKAGE(NETCDF)
  IF(${NETCDF_FOUND})
    MESSAGE(STATUS "  NETCDF_INCLUDE_DIR: ${NETCDF_INCLUDE_DIR}")
    MESSAGE(STATUS "  NETCDF_LIBRARY: ${NETCDF_LIBRARY}")
    MESSAGE(STATUS "  NETCDF_VERSION: ${NETCDF_VERSION}")

    INCLUDE_DIRECTORIES(${NETCDF_INCLUDE_DIRS})
    TARGET_LINK_LIBRARIES(${TARGET} ${NETCDF_LIBRARIES})
  ELSE()
    MESSAGE(FATAL_ERROR "NETCDF not found. Disable ASPECT_WITH_NETCDF or specify a hint to your installation directory with NETCDF_DIR.")
  ENDIF()
ENDIF()


IF (ASPECT_USE_SHARED_LIBS)
  # some systems need to explicitly link to some libraries to use dlopen
  TARGET_LINK_LIBRARIES(aspect ${CMAKE_DL_LIBS})
ENDIF()



# Check if we can raise floating point exceptions.
#
# Note that some library we link with in ASPECT on some platforms will trigger
# floating point exceptions when converting -numeric_limits<double>::max to a
# string. The only thing we can do is a configure check and disable the
# exceptions. This is done here:
SET(ASPECT_USE_FP_EXCEPTIONS ON CACHE BOOL "If ON, floating point exception are raised in debug mode.")

# Clang 6.0 throws random floating point exceptions, which we could not
# track down. Disable the exceptions for now.
IF("${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang" AND NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 6.0.0)
  SET(ASPECT_USE_FP_EXCEPTIONS OFF CACHE BOOL "" FORCE)
ENDIF()

IF (ASPECT_USE_FP_EXCEPTIONS)
  INCLUDE(${CMAKE_SOURCE_DIR}/cmake/fpe_check.cmake)

  IF (HAVE_FP_EXCEPTIONS)
    MESSAGE(STATUS "Runtime floating point checks enabled.")
  ELSE()
    SET(ASPECT_USE_FP_EXCEPTIONS OFF CACHE BOOL "" FORCE)
    MESSAGE(STATUS "No support for feenableexcept(), disabling runtime floating point exception checks.")
  ENDIF()
ENDIF()


#
# generate config.h
#

# Define macro with the source directory that will be exported in
# config.h. This can be used to hard-code the location of data files, such as
# in $ASPECT_SOURCE_DIR/data/velocity-boundary-conditions/gplates/*
SET(ASPECT_SOURCE_DIR ${CMAKE_SOURCE_DIR})

# And finally generate the file
CONFIGURE_FILE(
  ${CMAKE_SOURCE_DIR}/include/aspect/config.h.in
  ${CMAKE_BINARY_DIR}/include/aspect/config.h
  )


# Check if we want to precompile header files. This speeds up compile time,
# but can fail on some machines with old cmake, therefore it is disabled by
# default. Also cotire currently has issues with cmake generator expressions
# used in deal.II for cmake version 3.9 and above. Disable cotire for cmake >=
# 3.9. Starting with cmake 3.16 there is native support inside cmake and we can
# use that.
IF(CMAKE_VERSION VERSION_LESS 3.9)
  SET(ASPECT_PRECOMPILE_HEADERS OFF CACHE BOOL "Precompile external header files using cotire to speedup compile time. Currently only supported for cmake 3.8 and older versions, or 3.16 and newer versions.")
  SET(ASPECT_UNITY_BUILD OFF CACHE BOOL "Combine source files into less compile targets to speedup compile time. Currently only supported for cmake 3.16 and newer versions." FORCE)
ELSEIF(NOT CMAKE_VERSION VERSION_LESS 3.16)
  SET(ASPECT_PRECOMPILE_HEADERS ON CACHE BOOL "Precompile external header files to speedup compile time. Currently only supported for cmake 3.8 and older versions or 3.16 and newer versions.")
  SET(ASPECT_UNITY_BUILD ON CACHE BOOL "Combine source files into less compile targets to speedup compile time. Currently only supported for cmake 3.16 and newer versions.")
ELSE()
  SET(ASPECT_PRECOMPILE_HEADERS OFF CACHE BOOL "Precompile external header files to speedup compile time. Currently only supported for cmake 3.8 and older versions or 3.16 and newer versions." FORCE)
  SET(ASPECT_UNITY_BUILD OFF CACHE BOOL "Combine source files into less compile targets to speedup compile time. Currently only supported for cmake 3.16 and newer versions." FORCE)
ENDIF()

IF (ASPECT_PRECOMPILE_HEADERS AND CMAKE_CXX_COMPILER_ID MATCHES "Intel")
  # Intel 19.1 produces internal compiler errors inside bundled boost with
  # precompiled headers, so we deactive it:
  SET(ASPECT_PRECOMPILE_HEADERS OFF CACHE BOOL "" FORCE)
ENDIF()

IF (ASPECT_PRECOMPILE_HEADERS)
  IF (CMAKE_VERSION VERSION_LESS 3.9)
    MESSAGE(STATUS "Enabling cotire to precompile external header files.")
    INCLUDE(cmake/cotire)

    # Set some properties that are necessary for the header precompilations
    # and unity build to pass. We need to exclude some headers that
    # frequently cause problems, and undefine some macros between source
    # files that would otherwise interfere with each other.
    SET_TARGET_PROPERTIES (aspect PROPERTIES
        COTIRE_PREFIX_HEADER_IGNORE_PATH
        "/usr/include/;${CMAKE_SOURCE_DIR};${CMAKE_BINARY_DIR}")

    # This line activates the cotire module for the aspect target,
    # and therefore the whole precompilation
    cotire(aspect)

  ELSEIF (NOT CMAKE_VERSION VERSION_LESS 3.16)
    MESSAGE(STATUS "Precompiling common header files.")
    # Use the native cmake support to precompile some common headers
    # from ASPECT and deal.II that are frequently included, but rarely changed.
    TARGET_PRECOMPILE_HEADERS(aspect PRIVATE
      <aspect/global.h> <aspect/plugins.h> <aspect/introspection.h> <aspect/parameters.h>)
    TARGET_PRECOMPILE_HEADERS(aspect PRIVATE
      <deal.II/base/table_handler.h> <deal.II/base/timer.h>
      <deal.II/base/conditional_ostream.h> <deal.II/distributed/tria.h>
      <deal.II/dofs/dof_handler.h> <deal.II/fe/fe.h> <deal.II/fe/mapping_q.h>
      <deal.II/particles/particle_handler.h>)

  ELSE()
    MESSAGE(FATAL_ERROR "ASPECT_PRECOMPILE_HEADERS is currently only supported for CMake 3.8 and older versions or 3.16 and newer versions.")
  ENDIF()

ELSE()
  MESSAGE(STATUS "Disabling precompiling headers.")
ENDIF()


IF (ASPECT_UNITY_BUILD)
  IF (NOT CMAKE_VERSION VERSION_LESS 3.16)
    SET_PROPERTY(TARGET aspect PROPERTY UNITY_BUILD TRUE)
    MESSAGE(STATUS "Combining source files into unity build.")
  ELSEIF(CMAKE_VERSION VERSION_LESS 3.16)
    MESSAGE(FATAL_ERROR "ASPECT_UNITY_BUILD is currently only supported for CMake 3.16 and newer versions.")
  ENDIF()
ELSE()
  IF (NOT CMAKE_VERSION VERSION_LESS 3.16)
    SET_PROPERTY(TARGET aspect PROPERTY UNITY_BUILD FALSE)
  ENDIF()

  MESSAGE(STATUS "Disabling unity build.")
ENDIF()


###########################################################
# Having configured most of the compilation phase, now also
# deal with other parts of the system.
###########################################################

# Start with the documentation

ADD_SUBDIRECTORY(doc)


# Find the deal.II parameter GUI and install helper script
FIND_PROGRAM(PARAMETER_GUI_EXECUTABLE
        parameter_gui
        HINTS $ENV{PARAMETER_GUI_DIR} $ENV{PARAMETER_GUI_DIR}/bin ${PARAMETER_GUI_DIR} ${PARAMETER_GUI_DIR}/bin
        PATH bin)
MARK_AS_ADVANCED(CLEAR PARAMETER_GUI_EXECUTABLE)

# Did the user specify something that doesn't exist?
IF (PARAMETER_GUI_EXECUTABLE
        AND
    (NOT EXISTS ${PARAMETER_GUI_EXECUTABLE} OR IS_DIRECTORY ${PARAMETER_GUI_EXECUTABLE}))
  MESSAGE(STATUS "Warning: PARAMETER_GUI_EXECUTABLE '${PARAMETER_GUI_EXECUTABLE}' does not exist")
  SET(PARAMETER_GUI_EXECUTABLE "PARAMETER_GUI_EXECUTABLE-NOTFOUND" CACHE FILEPATH "" FORCE)
ENDIF()

IF (NOT PARAMETER_GUI_EXECUTABLE)
  MESSAGE(STATUS "Parameter GUI not found: install and provide a hint using -D PARAMETER_GUI_DIR or set -D PARAMETER_GUI_EXECUTABLE directly.")
ELSE()
  MESSAGE(STATUS "Found parameter GUI at: ${PARAMETER_GUI_EXECUTABLE}")
  CONFIGURE_FILE(
  ${CMAKE_SOURCE_DIR}/doc/aspect-gui
  ${CMAKE_BINARY_DIR}/aspect-gui
  @ONLY
  )
INSTALL(FILES ${CMAKE_BINARY_DIR}/aspect-gui
        DESTINATION bin
        PERMISSIONS OWNER_EXECUTE OWNER_WRITE OWNER_READ
                GROUP_READ GROUP_EXECUTE
                WORLD_READ WORLD_EXECUTE)
ENDIF()

#
## installation
#
# binary:
INSTALL(TARGETS aspect
  RUNTIME DESTINATION bin
  COMPONENT runtime)

# make sure we have the rpath to our dependencies set:
SET_PROPERTY(TARGET aspect PROPERTY INSTALL_RPATH_USE_LINK_PATH TRUE)

# headers:
INSTALL(DIRECTORY include/ ${CMAKE_BINARY_DIR}/include/
  DESTINATION include
  COMPONENT includes
  FILES_MATCHING PATTERN "*.h")

# cmake stuff:
INSTALL(FILES ${CMAKE_BINARY_DIR}/forinstall/AspectConfig.cmake ${CMAKE_BINARY_DIR}/AspectConfigVersion.cmake
        DESTINATION "lib/cmake/Aspect/")

INSTALL(FILES ${CMAKE_BINARY_DIR}/include/aspect/revision.h DESTINATION "include/aspect/")

MESSAGE(STATUS "Writing config into detailed.log...")
INCLUDE(cmake/write_config)

# print "info" if run for the first time:
IF(NOT USAGE_PRINTED)
  INCLUDE(${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/print_usage.cmake)
  SET(USAGE_PRINTED TRUE CACHE INTERNAL "")
ELSE()
  MESSAGE(STATUS "Run  ${_make_command} info  to print a detailed help message")
ENDIF()