Feature: Poweralgo (Delta)

[Ben-Star-Delta]

Scooterhacking Tool

Firmware (SHFW)

Type of feature

Performance

Priority

medium

SHUT Version

2.3.0

SHFW Version

0.3.7

Scooter model

Ninebot G30

Description of the new feature

Hello, i want to suggest something. In the old cfw times there was a Parameter, named "Virtual Throttle Limit". Anyways this parameter does something else than what it is named like. It has surely something to do with the poweralgo. I hope that there is a way to recreate this parameter in the Beta, but you have to rename it. The parameter helps to run the delta mod. It makes the motor pull more current.

Contact Information

14S (Discord)

[paulederbaus]

I don't see that parameter in a sh cfw generator. What generator did you use?

Was the default value 125, 128 or 183?

[Ben-Star-Delta]

It got removed from the CFW Tool of scooterhacking. paulederbaus ***@***.***> schrieb am Fr., 12. Apr. 2024, 19:19:

…

I don't see that parameter in a sh cfw generator. What generator did you use? Was the default value 125, 128 or 183? — Reply to this email directly, view it on GitHub <#60 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATWH7RMUZ3VSIMB7PMFKYE3Y5AJRLAVCNFSM6AAAAABGEO4WLOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJSGE3DSNBRGE> . You are receiving this because you authored the thread.Message ID: ***@***.*** com>

[paulederbaus]

@nopbxlr Please help me. What was patched with this?

[Ben-Star-Delta]

I am generating my firmware through a Link because it is not possible to set the Parameter in the Firmware Generator of Scooterhacking.
I just swap the last number of the link. Usually it is 120.

https://api.cfw.sh/max?output=zip2&version=DRV126&compat_patches=on&region=auto&remove_charging_mode=on&version_spoofing=on&showbatt=off&boot_workmode=3&voltage=36&p_sports=50000&p_drive=16000&i_sports=50000&i_drive=24000&i_eco=16000&max_speed_us=17&max_speed_eu=17&max_speed_de=17&direct_power_control=reg&direct_power_control_curve=quadratic&current_raising_coefficient=1000&motor_start_speed=1&brake_limit=130&brake_i_min=6000&brake_i_max=25000&kers_min_speed=5&no_kers=on&brake_current_raising_coefficient=500&brake_light_mode=static&brake_light_flash_frequency=0&cruise_control_delay=5&no_cruise_control=on&error_raising_level=3&no_overspeed_alarm=on&stay_on_locked=on&wheel_size=10.0&throttle_limit=97

[paulederbaus]

You are using a bug of an older patcher version. If you increase your total current limit, you will have the same effect in SHFW.

[Ben-Star-Delta]

Sorry but it doesnt have the same effect. I tested it a few times already: CFW 97 Coeff 50A set Phase Current -----> ~65A Phase Current SHFW 50A Phase Current -----> ~40A Phase Current But also: CFW 97 Coeff 25A ----> ~36A Phase Current (fast acceleration) SHFW 40A Phase Current ----> ~36A Phase Current (very slow acceleration) Even though it is the same real Phase current, there is a huge difference in acceleration. And i also dont think that it is a bug, because this parameter has no real impact if you are running your motor in star, but if you run it in delta, it has a huge impact. paulederbaus ***@***.***> schrieb am So., 28. Apr. 2024, 15:21:

…

You are using a bug of an older patcher version. If you increase your total current limit, you will have the same effect in SHFW. — Reply to this email directly, view it on GitHub <#60 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATWH7ROPLOAR45USOX37L63Y7TZVNAVCNFSM6AAAAABGEO4WLOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOBRGQ4DGNJXGI> . You are receiving this because you authored the thread.Message ID: ***@***.*** com>