From a5517ecc826b2fd26d34c88d886983b6bf638343 Mon Sep 17 00:00:00 2001
From: Junaid Ali Rasheed <jrasheed178@gmail.com>
Date: Wed, 25 Apr 2018 22:39:10 +0100
Subject: [PATCH 1/2] Create a script to setup files needed by Keter

+ Useful if you want to use your own Keter binary on a server
---
 setup-server.sh | 59 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 setup-server.sh

diff --git a/setup-server.sh b/setup-server.sh
new file mode 100644
index 0000000..9c4f90e
--- /dev/null
+++ b/setup-server.sh
@@ -0,0 +1,59 @@
+#!/bin/bash
+set -o errexit -o nounset -o xtrace
+
+# Quick start:
+# wget -O - https://raw.github.com/snoyberg/keter/master/setup-keter-server.sh | bash -ex
+
+sudo mkdir -p /opt/keter/bin
+sudo cp ~/.local/bin/keter /opt/keter/bin
+
+sudo mkdir -p /opt/keter/etc
+cat > /tmp/keter-config.yaml <<EOF
+# Directory containing incoming folder, where to store logs, etc. Relative to
+# the config file directory.
+root: ..
+
+# Keter can listen on multiple ports for incoming connections. These ports can
+# have HTTPS either enabled or disabled.
+listeners:
+    # HTTP
+    - host: "*4" # Listen on all IPv4 hosts
+      port: 80 # Could be used to modify port
+    # HTTPS
+    - host: "*4"
+      port: 443
+      key: key.pem
+      certificate: certificate.pem
+
+# User to run applications as
+
+# setuid: ubuntu
+
+# Get the user's IP address from x-forwarded-for. Useful when sitting behind a
+# load balancer like Amazon ELB.
+
+# ip-from-header: true
+EOF
+sudo chown root:root /tmp/keter-config.yaml
+sudo mv /tmp/keter-config.yaml /opt/keter/etc
+
+cat > /tmp/keter.service <<EOF
+[Unit]
+Description=Keter Web Server
+Documentation=man:keter(1p) http://github.com/snoyberg/keter
+After=network.service
+
+[Service]
+ExecStart=/opt/keter/bin/keter /opt/keter/etc/keter-config.yaml
+
+[Install]
+WantedBy=multi-user.target
+EOF
+sudo chown root:root /tmp/keter.service
+sudo mv /tmp/keter.service /etc/systemd/system/
+
+systemctl enable keter
+systemctl start keter
+
+sudo mkdir -p /opt/keter/incoming
+sudo chown "$(whoami)" /opt/keter/incoming

From 5a054f8ebfa80f25dab90d9e16ed5ed55e67839d Mon Sep 17 00:00:00 2001
From: Junaid Ali Rasheed <jrasheed178@gmail.com>
Date: Thu, 21 Jun 2018 19:37:31 +0100
Subject: [PATCH 2/2] Call setup-server.sh in the install script

---
 setup-keter.sh | 55 ++------------------------------------------------
 1 file changed, 2 insertions(+), 53 deletions(-)

diff --git a/setup-keter.sh b/setup-keter.sh
index 0045335..7aae99c 100755
--- a/setup-keter.sh
+++ b/setup-keter.sh
@@ -14,56 +14,5 @@ stack update
 stack setup
 stack install keter
 
-sudo mkdir -p /opt/keter/bin
-sudo cp ~/.local/bin/keter /opt/keter/bin
-
-sudo mkdir -p /opt/keter/etc
-cat > /tmp/keter-config.yaml <<EOF
-# Directory containing incoming folder, where to store logs, etc. Relative to
-# the config file directory.
-root: ..
-
-# Keter can listen on multiple ports for incoming connections. These ports can
-# have HTTPS either enabled or disabled.
-listeners:
-    # HTTP
-    - host: "*4" # Listen on all IPv4 hosts
-      port: 80 # Could be used to modify port
-    # HTTPS
-    - host: "*4"
-      port: 443
-      key: key.pem
-      certificate: certificate.pem
-
-# User to run applications as
-
-# setuid: ubuntu
-
-# Get the user's IP address from x-forwarded-for. Useful when sitting behind a
-# load balancer like Amazon ELB.
-
-# ip-from-header: true
-EOF
-sudo chown root:root /tmp/keter-config.yaml
-sudo mv /tmp/keter-config.yaml /opt/keter/etc
-
-cat > /tmp/keter.service <<EOF
-[Unit]
-Description=Keter Web Server
-Documentation=man:keter(1p) http://github.com/snoyberg/keter
-After=network.service
-
-[Service]
-ExecStart=/opt/keter/bin/keter /opt/keter/etc/keter-config.yaml
-
-[Install]
-WantedBy=multi-user.target
-EOF
-sudo chown root:root /tmp/keter.service
-sudo mv /tmp/keter.service /etc/systemd/system/
-
-systemctl enable keter
-systemctl start keter
-
-sudo mkdir -p /opt/keter/incoming
-sudo chown "$(whoami)" /opt/keter/incoming
+# Call script to create the files needed by keter and then launch keter
+bash setup-server.sh