ZEN32 Config Browser Missing Parameter 27

[karwosts]

Checklist

• I have read and followed the above instructions

• I have checked the troubleshooting section and my problem is not described there.

• I have read the changelog and my problem was not mentioned there or the fix did not work.

Describe the issue

What is happening?

Browsing https://devices.zwave-js.io/?jumpTo=0x027a:0x7000:0xa008:0.0#, I don't see config parameter 27 listed for the Zooz Zen32 scene controller.

This option is mentioned on their advanced options documentation page: https://www.support.getzooz.com/kb/article/608-zen32-scene-controller-advanced-settings/, and there haven't been any new firmware releases lately.

Is this just missing from the configuration file?

Enable/disable LED blinking when buttons are pressed
Parameter 27: Choose if you want the LED indicators to flash whenever a button is pressed on the device to confirm scene activation.
Values: 0 - LED blinking enabled; 1 - LED blinking disabled. Default: 0
Size: 1 byte dec

What did you expect to happen instead?

Parameter 27 listed at https://devices.zwave-js.io/?jumpTo=0x027a:0x7000:0xa008:0.0# (and ultimately to be able to control it in home assistant ZwaveJS)

Steps to reproduce the behavior:

1. Go to '...'
2. Click on '...'
3. Scroll down to '...'
4. See error

Anything else we should know?

Software versions

Driver (node-zwave-js): ...

Z-Wave JS UI: ...

Home Assistant Z-Wave Integration: ...

Home Assistant Z-Wave JS Addon: ...

ioBroker.zwave2 Adapter: ...

If you are using something non-standard, tell us here: ...

Z-Wave Controller (Stick/Dongle/...)

discussions

Device information

Manufacturer: ...
Model name: ...
Node ID: ...

Checklist

• I made sure to provide a driver log on level debug.

• The log includes a re-interview of the problematic device (if applicable).

• The log includes the problematic interaction with the device (if applicable).

• I provided the node ID of the problematic device (if applicable).

Upload Logfile

No logfile as its just an issue with the config browser.

[zwave-js-bot]

👋 Hey @karwosts!

Thanks for opening an issue! It doesn't look like you provided a logfile though. While not strictly necessary for every issue, having a driver log on loglevel debug is required to diagnose most issues.

Please consider uploading a logfile that captures your problem. As a reminder, here's how to create one:

• Z-Wave JS UI
• Home Assistant Z-Wave Integration
• ioBroker.zwave2 Adapter

[AlCalzone]

Will be solved by #7540