Unable to set parameter Motion Sensor Sensitivity for device NAS_PD02Z-2

[damsellem]

Checklist

• I have read and followed the above instructions

• I have checked the troubleshooting section and my problem is not described there.

• I have read the changelog and my problem was not mentioned there or the fix did not work.

Describe the issue

When I try to change configuration parameter 1 "Motion Sensor Sensitivity " of device NAS-PD02Z-2 I get "Value Update Failed " for any value

I expect the value to be changed

Steps to reproduce the behavior:

1. In zwave js ui, Go to product list
2. Select Device PIR motion Sensor (Node 75)
3. Go to Configuration V1 Section
4. Change value of [75-112-0-1] Motion Sensor: Sensitivity parameter (value 2 for exemple)
5. Click on Send
6. An error is logged "2025-01-18 07:49:16.48 ERROR Z-WAVE Unable to write 2 on 112-0-1: Fail

Anything else we should know?
Parameter configuration seems to be wrong. User Manual of this device indicates a value between 1 & 4 but current configuration indicates values between 0 and 99
link

Thanks a lot for your help

Software versions

zwave-js-ui: 9.20.0.bf3bdc3
zwave-js: 13.10.3

Zwave-js UI use with Jeedom solution, but I reproduced the issue with zwave js ui

Z-Wave Controller (Stick/Dongle/...)

AEON Labs | Z‐Stick Gen5 USB Controller | ZW090

Device information

Manufacturer: 0x0258
Product Identifier : 0x0200:0x1036
Model name: Shenzhen Neo Electronics Co., Ltd. / PIR Motion, Temperature & Light Sensor

Node ID: 75

https://devices.zwave-js.io/?jumpTo=0x0258:0x0200:0x1036:0.0

Checklist

• I made sure to provide a driver log on level debug.

• The log includes a re-interview of the problematic device (if applicable).

• The log includes the problematic interaction with the device (if applicable).

• I provided the node ID of the problematic device (if applicable).

Upload Logfile

zwavejs_2025-01-18 (1).log

[damsellem]

I thought that solution described in #7484 was included in zwave js last version.
Device is ok with change of configuration file indicated in this post
Sorry for the duplication