Add files via upload

Signed-off-by: ҉αkα x⠠⠵ <[email protected]>

README(OLD)

@@ -0,0 +1,279 @@
+# Offensive Security Tools for Termux
+
+Is not required to Unlock the Bootloader or ROOT of your Device ;)
+
+[![Powered by JFrog Bintray](./.github/static/powered-by-bintray.png)](https://bintray.com)
+[![Codacy Badge](https://app.codacy.com/project/badge/Grade/12cdb5d6ed82487385bb69104be4f6ee)](https://app.codacy.com/gh/4k4xs4pH1r3/termux/dashboard?utm_source=gh&utm_medium=referral&utm_content=&utm_campaign=Badge_grade)
+
+There are located packages that were requested, but not added to the
+[main][termux-packages] Termux repository due to various reasons. Packages
+available here may have lower quality, be unstable, or not work at all.
+
+## Pre-Requisite
+
+Download [F-Droid](https://f-droid.org/F-Droid.apk) on your Android, open it, search termux, and install it.
+
+Free Storage Space = 33.37 GB
+
+Now open Termux, each one of these 3 steps needs an independent session, for that just slide from left to right in termux to see the option. "New Session"
+
+
+## 0. Select Termux CloudFlare Repo
+```ShellSession
+termux-change-repo
+```
+
+## 1. Prepare Termux
+```ShellSession
+pkg update -y && pkg upgrade -y && pkg install termux-tools net-tools iproute2 unstable-repo root-repo x11-repo -y
+```
+#
+```ShellSession
+termux-setup-storage
+```
+#
+```ShellSession
+termux-wake-lock && export PATH=/sbin:/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin && export PATH=$PATH:/usr/local/sbin:/usr/local/bin
+```
+#
+
+## (Optional) Building packages manually
+
+You can build all packages manually by using the provided docker image. The only
+requirements are Linux-based hosts with Docker installed.
+
+a. Clone this repository:
+	```ShellSession
+	git clone https://github.com/termux/unstable-packages
+	```
+
+b. Enter build environment (will download docker image if necessary):
+	```ShellSession
+	cd ./unstable-packages
+	./start-builder.sh
+	```
+	The command shown above will start the builder for Android 7 (API level 24). If you
+	need to build a package for Android 5, use `./start-builder-legacy.sh`.
+
+c. Choose the package you want to build and run:
+	```ShellSession
+	./build-package.sh -a ${arch} ${package name}
+	```
+	Replace `${arch}` with target CPU architecture and `${package name}` with
+	package name you want to build.
+
+## Contributing
+
+If you wish to contribute, please take a look on our [contributing guide](./CONTRIBUTING.md).
+
+[termux-packages]: <https://github.com/termux/termux-packages>
+#
+#
+#
+#
+#
+## 2. Install Pre-Requisites:
+
+```ShellSession
+pkg update && pkg install unstable-repo root-repo x11-repo -y && apt update && apt install ruby neofetch coreutils busybox screenfetch vim nano python python-pip nodejs git openssh -y && screenfetch
+```
+#
+```ShellSession
+gem install nokogiri && gem update --system 3.5.6
+```
+#
+```ShellSession
+pkg update -y && pkg upgrade -y && pkg install python python2 ruby git php perl nmap bash which clang nano figlet cowsay curl tar zip unzip tor tsu wget wcalc openssl bmon -y && pkg update -y && pkg upgrade -y && cp $(which pip) $PREFIX/bin/pip3 && neofetch && pkg install wget openssl-tool proot -y && neofetch
+```
+#
+
+## 3.0 Install Kali Linux Nethuner (Method A)
+```ShellSession
+pkg install wget openssl-tool proot -y && hash -r && wget https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/Installer/Nethunter/nethunter.sh && bash nethunter.sh
+```
+#
+You can now launch Kali Nethunter with executing the script
+```ShellSession
+./start-nethunter.sh
+```
+
+## 3.1 Install Kali Linux NetHunter (Method B, Use only if Method A fails)
+
+```ShellSession
+termux-wake-lock;\
+termux-setup-storage;\
+apt-get update -y;\
+apt-get install wget -y;\
+wget https://raw.githubusercontent.com/Hax4us/Nethunter-In-Termux/master/kalinethunter;\
+bash kalinethunter;\
+rm *;\
+startkali
+
+
+
+apt-key adv --keyserver hkp://keys.gnupg.net --recv-keys 7D8D0BF6;\
+wget https://http.kali.org/pool/main/k/kali-archive-keyring/kali-archive-keyring_2024.1_all.deb;\
+apt --fix-broken install;\
+dpkg -i ./kali-archive-keyring_2024.1_all.deb;\
+rm kali-archive-keyring_2024.1_all.deb;\
+apt-get update -y;\
+apt-get install neofetch lolcat -y;\
+echo "neofetch --logo | lolcat;neofetch model distro os kernel shell memory" >> ~/.bashrc;\
+echo "PS1='
+ ╭──────────[ $(whoami)@$(uname -n) ]─[ $PWD ]
+ ╰── • '" >> /etc/bash.bashrc;exit
+
+
+
+echo "clear;startkali;exit" >> ~/.bashrc;bash;exit
+```
+#
+#
+#
+#
+#
+
+## 4. Create Kali User & Install Nokogiri + Lolcat
+
+From this point in advance execute in the same termux session
+Only this lines as root
+```ShellSession
+passwd
+```
+#
+```ShellSession
+chown root:root /usr/bin/sudo && chmod 4755 /usr/bin/sudo && sudo useradd -m -s /bin/bash -G sudo kali && echo "kali ALL=(ALL:ALL) ALL" | sudo tee -a /etc/sudoers
+```
+#
+```ShellSession
+sudo passwd kali
+```
+
+## 5. Update System as root
+
+```ShellSession
+sudo apt update -y && sudo apt full-upgrade -y --allow-downgrades && sudo apt install neofetch -y && neofetch && sudo gem install nokogiri && sudo apt-get autoclean && sudo apt install -f && sudo apt -f install && sudo apt autoremove -y && sudo apt-get clean cache && sudo dpkg --configure -a && cd && neofetch && sudo apt update -y && sudo apt full-upgrade -y --allow-downgrades && cd && neofetch
+```
+
+```ShellSession
+apt update -y && apt install git -y && cd /usr/share && mv /usr/share/wordlists /usr/share/wordlists_bck && git clone https://github.com/4k4xs4pH1r3/SecLists.git /usr/share/wordlists && cd /usr/share/wordlists_bck/ && mv * -u -f /usr/share/wordlists/ && cd /usr/share/ && git clone https://github.com/danielmiessler/SecLists.git /usr/share/SecLists && cd && apt install neofetch screenfetch -y && neofetch && apt install nmap metasploit-framework asciinema steghide radare2 mtr firmware-realtek net-tools wpasupplicant wireless-tools -y && screenfetch && apt-get autoclean && apt install -f && apt -f install && apt autoremove -y && apt-get clean cache && apt update && apt-get autoclean && apt-get clean cache && apt update && apt update -y && apt full-upgrade -y --allow-downgrades && sudo dpkg --configure -a && cd && sudo apt-get install python python3 python-pip python3-pip python-dev python-setuptools -y && neofetch && bash <(wget -qO- https://git.io/vAtmB)
+```
+
+Close Termux and Open Again
+
+## 6. Install Metasploit Omnibus nightly:
+```ShellSession
+    apt install nmap nginx -y && curl https://raw.githubusercontent.com/rapid7/metasploit-omnibus/master/config/templates/metasploit-framework-wrappers/msfupdate.erb > msfinstall && \
+    chmod 755 msfinstall && \
+    ./msfinstall
+```
+#
+```ShellSession
+gem install lolcat nokogiri bundle rails   
+```
+```ShellSession
+gem update --system
+```
+
+#
+
+## 7. Add Vuln + Vulners + Vulscan NSE as root
+
+Specialized Scripts to get CVE's details with Nmap & Metasploit
+
+```ShellSession
+apt install git neofetch screenfetch -y && cd /usr/share/nmap/scripts && git clone https://github.com/scipag/vulscan && git clone https://github.com/vulnersCom/nmap-vulners.git && cd vulscan/utilities/updater/ && chmod +x updateFiles.sh && ./updateFiles.sh && neofetch && cd /opt/metasploit/common/share/nmap/scripts && git clone https://github.com/scipag/vulscan && git clone https://github.com/vulnersCom/nmap-vulners.git && cd /usr/share/nmap/scripts/vulscan/utilities/updater && chmod +x updateFiles.sh && ./updateFiles.sh && cd && screenfetch
+```
+
+```ShellSession    
+sudo pip install --no-cache-dir -U crcmod
+```
+
+For display help for the individual scripts use this option
+
+    --script-help=$scriptname
+
+To get an easy list of the installed scripts, use 
+
+    locate nse | grep nmap
+#
+#
+The db_nmap sessions will be saved in xml for you can restart an early scan using
+
+    msfconsole
+    db_nmap --resume /root/.msf4/local/file.xml
+
+The history of Metasploit commands is here:
+
+    /root/.msf4/history
+
+## 8. Start Metasploit
+
+```ShellSession
+apt-get autoclean && apt install -f && apt -f install && apt autoremove -y && apt-get clean cache && apt update && apt-get autoclean && apt-get clean cache && apt update && apt update -y && apt full-upgrade -y --allow-downgrades && dpkg --configure -a && cd && neofetch
+```
+
+
+Configure the services and database of Metasploit Framework 5:
+
+    su 
+    msfupdate
+    update-rc.d postgresql enable && update-rc.d nginx enable && service postgresql start 
+    su postgres
+    createuser root -P
+    createdb —owner=root msfdb
+    exit
+
+Close terminal
+
+Open a new terminal as a normal user and verify that services are running and initiate the database of Metasploit Framework 5. 
+  #   
+
+```ShellSession
+service --status-all
+```
+
+It's time to open Metasploit Framework 5 (Works in Kali Linux and Ubuntu Cosmic)
+
+```ShellSession
+neofetch && msfdb init && /opt/metasploit-framework/bin/./msfconsole
+```
+
+#
+ (for repair use "msfdb reinit")
+
+
+
+## Update and Check Metasploit Framework:
+
+    msfupdate
+    db_status
+    db_rebuild_cache
+    load nexpose
+    load nessus
+    save
+#   
+#
+#
+#
+
+
+## 9. Create and Save your workspace
+
+    workspace -a ad
+
+    setg Prompt x(%whi%H/%grn%U/%whi%L%grn%D/%whi%T/%grn%W/%whiS%S/%grnJ%J)
+    setg ConsoleLogging y
+    setg LogLevel 5
+    setg SessionLogging y
+    setg TimestampOutput true
+    save
+    exit
+
+Make a backup each time that you need of each one of your workspaces by separately
+
+    db_export -f xml /root/msfuExported.xml
+
+Importing a file from an earlier scan (This is done using db_import followed by the path to our file.)
+
+    db_import /root/msfu/nmapScan