doc: document Podman Quadlet as a deployment option

docs/configure-keyperf.md

@@ -134,4 +134,4 @@ The `export_options` section defines how to handle the collected data. It includ
 
 ### Endpoints
 
-Refer to the [endpoints](configure-rest/#endpoints) section for more details.
+Refer to the [endpoints](configure-rest.md#endpoints) section for more details.

docs/install/quadlet.md

@@ -0,0 +1,132 @@
+# Containerized Harvest on Linux using Podman Quadlets
+
+This documentation describes how to run Harvest in a container using Podman Quadlets. Quadlets are a way to manage Podman containers with systemd. This is useful for running Harvest as a service on Linux.
+
+In this guide, we'll create a Podman Quadlet for each Harvest poller and a systemd service that starts the pollers when the system boots. 
+
+## Summary of Steps
+
+1. Install Harvest, set up your `harvest.yml`, and generate a `harvest-compose.yml` using the Harvest CLI per the [Harvest documentation](containers.md#setup-harvestyml). [details](#generate-harvest-compose-files)
+2. Use [podlet](https://github.com/containers/podlet) to generate Quadlet files from the `harvest-compose.yml` file from step 1. [details](#podlet)
+3. Make a few edits to the generated Quadlet files and move them to `/etc/containers/systemd/`. [details](#edit-quadlet-files)
+4. Tell systemd to reload the services by running `systemctl daemon-reload`.
+5. Start the systemd managed pollers (e.g., `sudo systemctl start poller-sar`).
+6. Reboot the machine and verify that all pollers restart.
+
+### Generate Harvest Compose Files
+Install Harvest and [generate harvest-compose.yml](containers.md#generate-a-docker-compose-for-your-pollers).
+
+```bash
+# cat example harvest-compose.yml
+
+services:
+  u2:
+    image: ghcr.io/netapp/harvest:latest
+    container_name: poller-u2
+    ports:
+      - "12990:12990"
+    command: '--poller u2 --promPort 12990 --config /opt/harvest.yml'
+    volumes:
+      - ./cert:/opt/harvest/cert
+      - ./harvest.yml:/opt/harvest.yml
+      - ./conf:/opt/harvest/conf
+    networks:
+      - backend
+
+  sar:
+    image: ghcr.io/netapp/harvest:latest
+    container_name: poller-sar
+    ports:
+      - "12991:12991"
+    command: '--poller sar --promPort 12991 --config /opt/harvest.yml'
+    volumes:
+      - ./cert:/opt/harvest/cert
+      - ./harvest.yml:/opt/harvest.yml
+      - ./conf:/opt/harvest/conf
+    networks:
+      - backend
+```
+
+### Podlet
+
+Install [podlet](https://github.com/containers/podlet) or compare the example `harvest-compose.yml` above with the generated quadlets below and make similar edits for your `harvest-compose.yml`.
+
+```bash
+podlet compose harvest-compose.yml
+```
+
+```bash
+# u2.container
+[Container]
+ContainerName=poller-u2
+Exec=--poller u2 --promPort 12990 --config /opt/harvest.yml
+Image=ghcr.io/netapp/harvest:latest
+Network=backend
+PublishPort=12990:12990
+Volume=./cert:/opt/harvest/cert
+Volume=./harvest.yml:/opt/harvest.yml
+Volume=./conf:/opt/harvest/conf
+
+---
+
+# sar.container
+[Container]
+ContainerName=poller-sar
+Exec=--poller sar --promPort 12991 --config /opt/harvest.yml
+Image=ghcr.io/netapp/harvest:latest
+Network=backend
+PublishPort=12991:12991
+Volume=./cert:/opt/harvest/cert
+Volume=./harvest.yml:/opt/harvest.yml
+Volume=./conf:/opt/harvest/conf
+```
+
+### Edit Quadlet Files
+
+Podlet created two YAML documents as shown above, one for each poller.
+We are going to make the following adjustments to the podlet output and copy/paste the final output into `/etc/containers/systemd/poller-u2.container` and `/etc/containers/systemd/poller-sar.container`.
+
+The edits are:
+
+1. Remove the `Network=backend` line that was included for Prometheus.
+2. Change all Volume paths to fully qualified paths. (e.g., change `./cert` to `/opt/harvest/cert` if you installed Harvest at `/opt/harvest`)
+3. Because we want to restart the pollers when the machine reboots add the following section:
+
+```service
+[Install]
+# Start by default on boot
+WantedBy=multi-user.target default.target
+
+[Service]
+Restart=always
+```
+
+Here is the final output for the sar poller service with all the edits applied: 
+
+```service
+# sar.container
+[Container]
+ContainerName=poller-sar
+Exec=--poller sar --promPort 12991 --config /opt/harvest.yml
+Image=ghcr.io/netapp/harvest:latest
+PublishPort=12991:12991
+Volume=/opt/harvest/cert:/opt/harvest/cert
+Volume=/opt/harvest/harvest.yml:/opt/harvest.yml
+Volume=/opt/harvest/conf:/opt/harvest/conf
+
+[Install]
+# Start by default on boot
+WantedBy=multi-user.target default.target
+
+[Service]
+Restart=always
+```
+
+### Move Quadlet Files
+
+Move each service file to `/etc/containers/systemd/` e.g. `mv poller-sar.container /etc/containers/systemd/poller-sar.container`
+
+# References
+- [Make systemd better for Podman with Quadlet](https://www.redhat.com/en/blog/quadlet-podman)
+- https://docs.podman.io/en/latest/markdown/podman-systemd.unit.5.html
+- https://github.com/containers/podlet

mkdocs.yml

@@ -15,6 +15,7 @@ nav:
           - 'Docker': 'install/containers.md'
           - 'K8': 'install/k8.md'
           - 'Podman': 'install/podman.md'
+          - 'Quadlet': 'install/quadlet.md'
           - 'Containerd': 'install/containerd.md'
       - 'Native': 'install/native.md'
   - System Requirements: 'system-requirements.md'