hydro models => add support for setting/getting circulation pump

[Robbe-B]

hydro models => add support for setting/getting the minimum temperature for which the circulation pump should turn on

[Robbe-B]

@ggerrd,
Can you check if getting and setting the value for the circulation pump works for your M1 Hydro model ? (discussed in #130)

@RickType
Can you check if getting and setting the value for the circulation pump works for your M2 Hydro model ?

[RickType]

Hey, I downloaded the latest repo 0.6.0, but I can’t find this entity?

[Robbe-B]

@RickType, indeed It isn't released yet, I'll create a release for you, in order to test.

[Robbe-B]

@RickType,
https://github.com/Robbe-B/maestro_mcz/releases/tag/v0.6.2-beta is now available

[ggerrd]

Sorry I‘m didin‘t understand how get the Test file on my System But if its work it will be a big step for ne Thanks Mit freundlichen GrüßenGerd Neuhaus Gekürzte Signatur / Mobilemail Mit freundlichen GrüßenGerd Neuhaus Gekürzte Signatur / Mobilemail Am 10.12.2024 um 07:58 schrieb Robbe-B ***@***.***>: Merged #164 into main. —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***>

[Robbe-B]

@ggerrd,
Following release is now available => https://github.com/Robbe-B/maestro_mcz/tree/v0.6.2-beta

[Robbe-B]

@ggerrd,
The rest of the requested features are coming soon.

[RickType]

Perfekt, will check today...Am 10.12.2024 08:29 schrieb Robbe-B ***@***.***>: @RickType, https://github.com/Robbe-B/maestro_mcz/releases/tag/v0.6.1-beta is now available —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***>

[RickType]

Works perfectly, thx!Am 10.12.2024 11:39 schrieb ***@***.***:Perfekt, will check today...Am 10.12.2024 08:29 schrieb Robbe-B ***@***.***>: @RickType, https://github.com/Robbe-B/maestro_mcz/releases/tag/v0.6.1-beta is now available —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***>

[Robbe-B]

@RickType,
Great to hear !
I'm planning to implement a couple of other hydro features soon.
It would be great if you could keep verifying those for me, since I don't have any hydro model myself to test with and your setup seems to have a very complete set of hydro features.
Kind regards,
Robbe

[RickType]

Sure, let me know when a new feature is available.You can also ask me questions at any point in time, as the steering of a hydro stove is completely different. There are also different mods that are offered. E.g. controlling via the stove, vs external triggers.And again, many thanks for your commitment and all the effort you put into this project 👍 Am 10.12.2024 15:29 schrieb Robbe-B ***@***.***>: @RickType, Great to hear ! I'm planning to implement a couple of other hydro features soon. It would be great if you could keep verifying those for me, since I don't have any hydro model myself to test with and your setup seems to have a very complete set of hydro features. Kind regards, Robbe —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***>

[ggerrd]

Hy Now i can See the slider Slide to a new valueBut it takes no Effekt In mqtt there came  no new temperature tooBut in mqtt it will be the original temp vorm the stove And I can See it in mqtt if I change in the App But fange from mqtt to stove do Not work at the Moment  

[RickType]

I changed it from both sides. Changes in the App will be shown in HA and vice versa…

[ggerrd]

My Setup is an MCZ M1 this will be the big diference,

In the App you have to log in with Passwort ( 0434 ) to get into the Menu to Edit the Pump temp

[RickType]

That’s the same with the M2. Advanced settings and then temperatures…
Exact model name is: Musa Hydromatic 18 M2+

[Robbe-B]

@ggerrd,
It's very odd that the SET is not working tbh.
[Important] => Can you provide me with your diagnostics file ? (can be downloaded in this integration)
[Important] => Do you see anything in the Home Assistant logging related to the MCZ integration ? (after trying to set the circulation pump temp)

Also just for your information this integration has nothing to do with MQTT 😄

Kind regards,
Robbe

[Robbe-B]

@ggerrd,
Also, are you sure the SET doesn't work, couldn't it just be that the values don't update instantly (30sec polling time)
Kind Regards,
Robbe

[ggerrd]

c1e7965d_maestro_gateway_2024-12-11T08-55-03.019Z.log

[ggerrd]

i m sure the set doesen´t work
if I use the slider example 60G Degree the slider get the new position and stay there all the time the value right stay all the time at 48 Degree
threre is noch efeckt after 30sec or minute
at the mobile phone I have see a info like can´t set new temp time out. but the massing was only one time and I can´t get it a second time to send a sreencout

[Robbe-B]

@ggerrd,
This is logging from another integration, not this one.

[Robbe-B]

@ggerrd,
The logging you gave came from => https://github.com/Chibald/maestrogateway

[ggerrd]

Die Aktion number/set_value konnte nicht ausgeführt werden. unknown error

[Robbe-B]

Die Aktion number/set_value konnte nicht ausgeführt werden. unknown error

It's good that you have a message like this, this means there is more information in the logging.
Settings => System => Logs

[ggerrd]

home-assistant_2024-12-11T10-05-43.055Z.log

[Robbe-B]

@ggerrd,
Unfortunately there is nothing in this logging related to this issue.

[Robbe-B]

@ggerrd,
Does a hydro stove also has special 'modes' where certain things cannot be set if the mode isn't active ?
Is your Stove on while trying to set this value ?

[ggerrd]

Tempertur min for circle can set all the time in the app ( after passwort)

i have re install and restart every thing now the stove get the new value, only the value right to the slider stay at the old value

[Robbe-B]

Tempertur min for circle can set all the time in the app ( after passwort)

i have re install and restart every thing now the stove get the new value, only the value right to the slider stay at the old value

If I understand the set from this integration in Home Assistant is working correctly, right ?
The fact that the value next to the slider doesn't update immediately might have something to do with another issue (I'm trying to fix) for M1 models => #114

Note that it's all very hard for me trying to fix these issues without having those stove models myself 😄

[ggerrd]

Yes I thing it is on the right way,
I will test it in the next hours
Home Assistent ist my second System like a gatway too the main Server ( IPSymcon)
all Home Assist Entitäten goes to Mqtt and by this way linked the two systems
mybee it is posibility to set the new value by mqtt ? at the moment the pumping value does not chance

I read 114 if you like you can get on my stove so i need your mail address too setup a login

[RickType]

Hi Robbe,

the power of the pump in percent would be also interesting.
The quality of the pellets varies. The better the wood, the higher the power in percentage. E.g. The boiler temp is 66 degree, but the pump power is higher the better the calorific value is. I know, depends also on other factors like return temperature (I have 45 degree). But still, the pump power is an interesting value.

Thx
Hotte

[RickType]

Hi,

go a strange behaviour from the stove. See attached picture. Will restart HA and the stove and will double check.

Don't know if there is an issue with the cloud, but it appears since I updated to the new Version.

Cheers
Hotte

home-assistant_2024-12-16T06-56-29.733Z.log
config_entry-maestro_mcz-9e621916f330ef9b684ebb1bca29a701-3.json

[Robbe-B]

@RickType,
I'm aware of it, it's the MCZ cloud or firmware update.
All stoves are going nuts

[Robbe-B]

@RickType,
Did you do a firmware update ?

[RickType]

@RickType, Did you do a firmware update ?

Nope , there was no update availble…

[RickType]

Issue seems to be solved. But it had no impact on my side. Since the MCZ cloud is not reliable, I switched back to local steering. Basically I use the dry contact of a Shelly to switch the stove on…

[ggerrd]

hey, I've been testing it intensively over the last few days. The communication with the oven works very well. The display and the slider only update occasionally for me Since I set the value via automation anyway, it doesn't bother me Thank you happy holidays