Merge to tag jdk-17.0.12+2

src/hotspot/cpu/riscv/frame_riscv.hpp

@@ -133,7 +133,7 @@
     // Entry frames
     // n.b. these values are determined by the layout defined in
     // stubGenerator for the Java call stub
-    entry_frame_after_call_words                     =  34,
+    entry_frame_after_call_words                     =  35,
     entry_frame_call_wrapper_offset                  = -10,
 
     // we don't need a save area

src/hotspot/cpu/riscv/stubGenerator_riscv.cpp

@@ -127,8 +127,9 @@ class StubGenerator: public StubCodeGenerator {
   //     [ return_from_Java     ] <--- sp
   //     [ argument word n      ]
   //      ...
-  // -34 [ argument word 1      ]
-  // -33 [ saved f27            ] <--- sp_after_call
+  // -35 [ argument word 1      ]
+  // -34 [ saved FRM in Floating-point Control and Status Register ] <--- sp_after_call
+  // -33 [ saved f27            ]
   // -32 [ saved f26            ]
   // -31 [ saved f25            ]
   // -30 [ saved f24            ]
@@ -165,8 +166,9 @@ class StubGenerator: public StubCodeGenerator {
 
   // Call stub stack layout word offsets from fp
   enum call_stub_layout {
-    sp_after_call_off  = -33,
+    sp_after_call_off  = -34,
 
+    frm_off            = sp_after_call_off,
     f27_off            = -33,
     f26_off            = -32,
     f25_off            = -31,
@@ -214,6 +216,7 @@ class StubGenerator: public StubCodeGenerator {
 
     const Address sp_after_call (fp, sp_after_call_off  * wordSize);
 
+    const Address frm_save      (fp, frm_off            * wordSize);
     const Address call_wrapper  (fp, call_wrapper_off   * wordSize);
     const Address result        (fp, result_off         * wordSize);
     const Address result_type   (fp, result_type_off    * wordSize);
@@ -296,6 +299,16 @@ class StubGenerator: public StubCodeGenerator {
     __ fsd(f26, f26_save);
     __ fsd(f27, f27_save);
 
+    __ frrm(t0);
+    __ sd(t0, frm_save);
+    // Set frm to the state we need. We do want Round to Nearest. We
+    // don't want non-IEEE rounding modes.
+    Label skip_fsrmi;
+    guarantee(__ RoundingMode::rne == 0, "must be");
+    __ beqz(t0, skip_fsrmi);
+    __ fsrmi(__ RoundingMode::rne);
+    __ bind(skip_fsrmi);
+
     // install Java thread in global register now we have saved
     // whatever value it held
     __ mv(xthread, c_rarg7);
@@ -413,6 +426,14 @@ class StubGenerator: public StubCodeGenerator {
 
     __ ld(x9, x9_save);
 
+    // restore frm
+    Label skip_fsrm;
+    __ ld(t0, frm_save);
+    __ frrm(t1);
+    __ beq(t0, t1, skip_fsrm);
+    __ fsrm(t0);
+    __ bind(skip_fsrm);
+
     __ ld(c_rarg0, call_wrapper);
     __ ld(c_rarg1, result);
     __ ld(c_rarg2, result_type);

src/java.naming/share/classes/com/sun/jndi/ldap/Connection.java

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 1999, 2023, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 1999, 2024, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -120,17 +120,15 @@
 public final class Connection implements Runnable {
 
     private static final boolean debug = false;
-    private static final int dump = 0; // > 0 r, > 1 rw
-
 
     private final Thread worker;    // Initialized in constructor
 
-    private boolean v3 = true;       // Set in setV3()
+    private boolean v3 = true;     // Set in setV3()
 
     public final String host;  // used by LdapClient for generating exception messages
-                         // used by StartTlsResponse when creating an SSL socket
+                               // used by StartTlsResponse when creating an SSL socket
     public final int port;     // used by LdapClient for generating exception messages
-                         // used by StartTlsResponse when creating an SSL socket
+                               // used by StartTlsResponse when creating an SSL socket
 
     private boolean bound = false;   // Set in setBound()
 
@@ -319,30 +317,37 @@ private SocketFactory getSocketFactory(String socketFactoryName) throws Exceptio
     }
 
     private Socket createConnectionSocket(String host, int port, SocketFactory factory,
-                                          int connectTimeout) throws Exception {
+                                          int connectTimeout) throws IOException {
         Socket socket = null;
 
+        // if timeout is supplied, try to use unconnected socket for connecting with timeout
         if (connectTimeout > 0) {
-            // create unconnected socket and then connect it if timeout
-            // is supplied
-            InetSocketAddress endpoint =
-                    createInetSocketAddress(host, port);
-            // unconnected socket
-            socket = factory.createSocket();
-            // connect socket with a timeout
-            socket.connect(endpoint, connectTimeout);
             if (debug) {
-                System.err.println("Connection: creating socket with " +
-                        "a connect timeout");
+                System.err.println("Connection: creating socket with a connect timeout");
+            }
+            try {
+                // unconnected socket
+                socket = factory.createSocket();
+            } catch (IOException e) {
+                // unconnected socket is likely not supported by the SocketFactory
+                if (debug) {
+                    System.err.println("Connection: unconnected socket not supported by SocketFactory");
+                }
+            }
+            if (socket != null) {
+                InetSocketAddress endpoint = createInetSocketAddress(host, port);
+                // connect socket with a timeout
+                socket.connect(endpoint, connectTimeout);
             }
         }
+
+        // either no timeout was supplied or unconnected socket did not work
         if (socket == null) {
             // create connected socket
-            socket = factory.createSocket(host, port);
             if (debug) {
-                System.err.println("Connection: creating connected socket with" +
-                        " no connect timeout");
+                System.err.println("Connection: creating connected socket with no connect timeout");
             }
+            socket = factory.createSocket(host, port);
         }
         return socket;
     }
@@ -351,7 +356,7 @@ private Socket createConnectionSocket(String host, int port, SocketFactory facto
     // the SSL handshake following socket connection as part of the timeout.
     // So explicitly set a socket read timeout, trigger the SSL handshake,
     // then reset the timeout.
-    private void initialSSLHandshake(SSLSocket sslSocket , int connectTimeout) throws Exception {
+    private void initialSSLHandshake(SSLSocket sslSocket, int connectTimeout) throws Exception {
 
             if (!IS_HOSTNAME_VERIFICATION_DISABLED) {
                 SSLParameters param = sslSocket.getSSLParameters();

src/java.naming/share/classes/module-info.java

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014, 2020, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2014, 2024, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
@@ -36,21 +36,33 @@
  * The following implementation specific environment properties are supported by the
  * default LDAP Naming Service Provider implementation in the JDK:
  * <ul>
+ *     <li>{@code java.naming.ldap.factory.socket}:
+ *         <br>The value of this environment property specifies the fully
+ *         qualified class name of the socket factory used by the LDAP provider.
+ *         This class must implement the {@link javax.net.SocketFactory} abstract class
+ *         and provide an implementation of the static "getDefault()" method that
+ *         returns an instance of the socket factory. By default the environment
+ *         property is not set.
+ *     </li>
  *     <li>{@code com.sun.jndi.ldap.connect.timeout}:
- *         <br>The value of this property is the string representation
- *         of an integer representing the connection timeout in
- *         milliseconds. If the LDAP provider cannot establish a
- *         connection within that period, it aborts the connection attempt.
+ *         <br>The value of this environment property is the string representation
+ *         of an integer specifying the connection timeout in milliseconds.
+ *         If the LDAP provider cannot establish a connection within that period,
+ *         it aborts the connection attempt.
  *         The integer should be greater than zero. An integer less than
  *         or equal to zero means to use the network protocol's (i.e., TCP's)
  *         timeout value.
  *         <br> If this property is not specified, the default is to wait
  *         for the connection to be established or until the underlying
  *         network times out.
+ *         <br> If a custom socket factory is provided via environment property
+ *         {@code java.naming.ldap.factory.socket} and unconnected sockets
+ *         are not supported, the specified timeout is ignored
+ *         and the provider behaves as if no connection timeout was set.
  *     </li>
  *     <li>{@code com.sun.jndi.ldap.read.timeout}:
  *         <br>The value of this property is the string representation
- *         of an integer representing the read timeout in milliseconds
+ *         of an integer specifying the read timeout in milliseconds
  *         for LDAP operations. If the LDAP provider cannot get a LDAP
  *         response within that period, it aborts the read attempt. The
  *         integer should be greater than zero. An integer less than or