add the input files for cdb_tpv23

quakeworx/cdb_tpv23/parameters_qwx.par

@@ -0,0 +1,111 @@
+&equations
+!yaml file defining spatial dependance of material properties
+MaterialFileName = 'tpv23_damMaterial.yaml'
+/
+
+&IniCondition
+/
+
+&Boundaries
+BC_fs = 1                                      ! enable free surface boundaries
+BC_dr = 1                                      ! enable fault boundaries
+BC_of = 1                                      ! enable absorbing boundaries
+/
+
+&DynamicRupture
+FL = 16                                        ! Friction law
+!0: none, 16:LSW, 103: RS with strong velocity weakening
+!yaml file defining spatial dependance of fault properties
+ModelFileName = 'tpv23_fault.yaml'
+
+!characteristic time of the forced nucleation
+t_0 = 0.5
+
+!reference vector for defining strike and dip direction
+XRef = 0.0                                    ! Reference point
+YRef = -1.0
+ZRef = 0.0
+refPointMethod = 1
+
+RF_output_on = 1                               ! Rupture front ascii output
+OutputPointType = 5                            ! Type (0: no output, 3: ascii file, 4: paraview file, 5: 3+4)
+SlipRateOutputType=1        ! 0: (smoother) slip rate output evaluated from the difference between the velocity on both side of the fault
+                            ! 1: slip rate output evaluated from the fault tractions and the failure criterion (less smooth but usually more accurate where the rupture front is well developped)
+/
+
+!see: https://seissol.readthedocs.io/en/latest/fault-output.html
+! parameterize paraview file output
+&Elementwise
+printIntervalCriterion = 2                     ! 1=iteration, 2=time
+printtimeinterval_sec = 1.0                    ! Time interval at which output will be written
+OutputMask = 1 1 1 0 1 1 1 1 1 1 1             ! turn on and off fault outputs
+refinement_strategy = 2
+refinement = 1
+/
+
+! parameterize ascii fault file outputs
+&Pickpoint
+printtimeinterval = 1       ! Index of printed info at timesteps
+OutputMask = 1 1 1 1        ! turn on and off fault outputs
+nOutpoints = 14
+PPFileName = 'tpv23_3km_faultreceivers.dat'
+/
+
+&SourceType
+/
+
+&SpongeLayer
+/
+
+&MeshNml
+MeshFile = 'stepover23_3km_qwx.puml.h5'
+meshgenerator = 'PUML'                         ! Name of meshgenerator (Gambit3D-fast, Netcdf or PUML)
+/
+
+&Discretization
+CFL = 0.99                                      ! CFL number (<=1.0)
+FixTimeStep = 5                                ! Manualy chosen minimum time
+ClusteredLTS = 1                               ! 1 for Global time stepping, 2,3,5,... Local time stepping (advised value 2)
+!ClusteredLTS defines the multi-rate for the time steps of the clusters 2 for Local time stepping
+/
+
+&Output
+FaultOutputFlag = 1                            ! DR output (add this line only if DR is active)
+OutputFile = 'outputs/cdb_tpv23'
+Format = 6                                    ! Format (10= no output, 6=hdf5 output)
+!             |stress     |vel
+iOutputMask = 1 1 1 1 1 1 1 1 1
+!                 |strain     |eta
+iPlasticityMask = 0 0 0 0 0 0 1
+TimeInterval =  5.                           ! Index of printed info at time
+refinement = 1
+
+! Free surface output
+SurfaceOutput = 1
+SurfaceOutputRefinement = 2
+SurfaceOutputInterval = 5.0
+
+printIntervalCriterion = 2          ! Criterion for index of printed info: 1=timesteps,2=time,3=timesteps+time
+
+pickdt = 0.005                       ! Pickpoint Sampling
+pickDtType = 1                       ! Pickpoint Type
+RFileName = 'tpv23_receivers.dat'      ! Record Points in extra file
+
+xdmfWriterBackend = 'posix' ! (optional) The backend used in fault, wavefield,
+! and free-surface output. The HDF5 backend is only supported when SeisSol is compiled with
+! HDF5 support.
+
+EnergyOutput = 1 ! Computation of energy, written in csv file
+EnergyTerminalOutput = 1 ! Write energy to standard output
+EnergyOutputInterval = 0.5
+/
+
+&AbortCriteria
+EndTime = 14
+/
+
+&Analysis
+/
+
+&Debugging
+/

quakeworx/cdb_tpv23/tpv23_3km_faultreceivers.dat

@@ -0,0 +1,29 @@
+0.0e3 -3.0e3 0.0e3
+5.0e3 -3.0e3 0.0e3
+20.0e3 -3.0e3 0.0e3
+4.0e3 -3.0e3 -5.0e3
+4.0e3 -3.0e3 -5.1e3
+4.0e3 -3.0e3 -5.5e3
+5.0e3 -3.0e3 -5.0e3
+5.0e3 -3.0e3 -5.1e3
+5.0e3 -3.0e3 -5.5e3
+0.0e3 -3.0e3 -10.0e3
+5.0e3 -3.0e3 -10.0e3
+6.0e3 -3.0e3 -10.0e3
+6.0e3 -3.0e3 -9.0e3
+6.0e3 -3.0e3 -8.0e3
+6.0e3 -3.0e3 -7.0e3
+6.0e3 -3.0e3 -6.0e3
+6.0e3 -3.0e3 -5.0e3
+10.0e3 -3.0e3 -10.0e3
+20.0e3 -3.0e3 -10.0e3
+7.0e3 -3.0e3 -11.0e3
+7.0e3 -3.0e3 -10.0e3
+7.0e3 -3.0e3 -9.0e3
+7.5e3 -3.0e3 -11.0e3
+7.5e3 -3.0e3 -10.0e3
+7.5e3 -3.0e3 -9.0e3
+12.5e3 -3.0e3 -11.0e3
+12.5e3 -3.0e3 -10.0e3
+12.5e3 -3.0e3 -9.0e3
+12.5e3 -3.0e3 -7.0e3

quakeworx/cdb_tpv23/tpv23_damMaterial.yaml

@@ -0,0 +1,46 @@
+!Switch
+[rho,mu0,lambda0,xi0,mu,lambda,gamma,epsxx_alpha,epsyy_alpha,epszz_alpha,epsxy_alpha,epsyz_alpha,epszx_alpha]: !ConstantMap
+  map:
+    rho:    2760
+    mu0:     32038120320
+    lambda0: 32043759360
+    xi0:     0.75
+    mu:     32038120320
+    lambda: 32043759360
+    gamma:  0.00e10
+    epsxx_alpha: -4.6921e-5
+    epsyy_alpha: -5.9238e-4
+    epszz_alpha: -4.6921e-5
+    epsxy_alpha: 4.5787e-4
+    epsyz_alpha: 0.0
+    epszx_alpha: 0.0
+[gammaR,Cd]: !FunctionMap
+  map:
+    gammaR: |
+      depthVar = 1000.0;
+      dGam = 0.0;
+      uGam = 37200000000.0;
+      if (z >= -depthVar) {
+         return uGam - dGam*(depthVar + z)/depthVar;
+      }
+      return uGam;
+    Cd: |
+      rx = sqrt(x*x);
+      rz = sqrt((z+7500)*(z+7500));
+      rx1 = sqrt((x+7500)*(x+7500));
+      rx2 = sqrt((x-7500)*(x-7500));
+      r = max(rx, rz);
+      depthCd = 1000.0;
+      CdUni = 0.000005;
+      CdDropTo = 0.0000005;
+      if (z > -depthCd) {
+         return CdUni - (CdUni - CdDropTo)*(depthCd+z)/depthCd;
+      }
+      if (max(rx1,rz) <=1800) {
+         return CdUni;
+      }
+      if (max(rx2,rz) <=1800) {
+         return CdUni;
+      }
+      return CdUni;
+

quakeworx/cdb_tpv23/tpv23_fault.yaml

@@ -0,0 +1,55 @@
+!Switch
+[s_xz,s_yz]: !ConstantMap
+  map:
+    s_xz: 0
+    s_yz: 0
+[s_xy]: !FunctionMap
+  map:
+    s_xy: |
+       tau_0 = 0.0;
+       if (z >= -15000.0) {
+         return tau_0;
+       }
+       if (z < -15000.0) {
+        return tau_0 - 0.0*(-z-15000);
+       }
+       return 0.0;
+[s_zz]: !FunctionMap
+  map:
+    s_zz: |
+      return -50000000.0;
+[s_xx]: !FunctionMap
+  map:
+    s_xx: |
+      return -50000000.0;
+[s_yy]: !FunctionMap
+  map:
+    s_yy: |
+      return -0.0;
+[mu_s, mu_d, d_c]: !ConstantMap
+  map:
+     mu_s:        0.548
+     mu_d:        0.373
+     d_c:         0.3
+[cohesion,forced_rupture_time]: !FunctionMap # nucleation as used  SCEC tpv24
+  map:
+    cohesion: |
+      cohesion = -0.0;
+      zIncreasingCohesion = 5000.0;
+      if (z >= -zIncreasingCohesion) {
+        return cohesion - 1.0*1400.0 * ( z + zIncreasingCohesion);
+      }
+      return cohesion;
+    forced_rupture_time: |
+      r = sqrt(pow(x+15000.0, 2.0) + pow(z+10000.0, 2.0));
+      r_crit = 3000.0;
+      Vs = 3464.0;
+      if (r <= r_crit) {
+        return r/(0.7*Vs)+(0.081*r_crit/(0.7*Vs))*(1.0/(1.0-pow(r/r_crit, 2.0))-1.0);
+      }
+      return 1000000000.0;
+[Tnuc_n, Tnuc_s, Tnuc_d]: !ConstantMap
+  map:
+    Tnuc_n: 0
+    Tnuc_s: 0
+    Tnuc_d: 0

quakeworx/cdb_tpv23/tpv23_receivers.dat

@@ -0,0 +1,8 @@
+-2e3 3e3 0
+-2e3 -3e3 0
+2e3 3e3 0
+2e3 -0.6e3 0
+2e3 -4.2e3 0
+8e3 3e3 0
+8e3 -2.3e3 0
+8e3 -7.6e3 0