my design #73
my design #73
Conversation
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! 👋 |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! 👋 |
|
Thank you for your pull request! 👋 |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
You are uploading one file under the root directory and one under the submission. Would you please update your request? Only in 'submissions' |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
|
hi @omidesml ! sorry, I'm quite lost with all of this... I think now it must be okay... |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
|
75 layout errors detected. |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
|
Hi!! When I run DRC I have no errors but then on the run layout verification I have several errors related to diconected pins, can you please help? thank you |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! Staff will review your submission, and if it passes all checks, it will be merged. After merging, you may check the merged file. 👋 |
|
34 layout errors detected. |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! 👋 |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! 👋 |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! 👋 |
|
Thank you for your pull request! 👋 |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
1 similar comment
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! 👋 |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! 👋 |
|
Welcome, new contributor! Thank you for uploading your design. If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK, so please make sure your tools are running the latest version. The rule is: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
Thank you for your pull request! 👋 |
|
why does my pull request says it has a bug if everything is alright??? |
No description provided.