TEIC · trishaoconnor · Dec 10, 2024 · Dec 10, 2024 · Dec 10, 2024 · Dec 10, 2024
diff --git a/P5/Source/Guidelines/en/CH-LanguagesCharacterSets.xml b/P5/Source/Guidelines/en/CH-LanguagesCharacterSets.xml
@@ -426,7 +426,7 @@ dates, and predefined value lists.</note></p></div>
    individual characters, the overall typesetting process also
    follows specific rules of how to calculate the distance between
    characters, how much whitespace occurs between words, at which
-   points line breaks might occur and so forth.  </p>
+   points line beginnings might occur and so forth.  </p>
    <p>If we concern ourselves only with the rendering process of the
    characters themselves, leaving out all these other parameters, we
    will realize that of all the information required for this process, only a small

diff --git a/P5/Source/Guidelines/en/CO-CoreElements.xml b/P5/Source/Guidelines/en/CO-CoreElements.xml
@@ -329,7 +329,7 @@ problem for text encoders. Suppose, for example, that we wish to
 investigate a diachronic English corpus for occurrences of
 <mentioned>tea-pot</mentioned> and <mentioned>teapot</mentioned>, to
 find evidence for the point at which this compound becomes
-lexicalized. Any case where the word is hyphenated across a linebreak,
+lexicalized. Any case where the word is hyphenated across a line beginning,
 like this: <eg xml:space="preserve"><![CDATA[tea-
 pot]]></eg> is
 ambiguous: there is no simple way of deciding which of the two
@@ -381,11 +381,11 @@ whitespace. </p>
 
 <p> The <gi>lb</gi>, <gi>pb</gi>, and <gi>cb</gi> elements are notable
 exceptions to this general rule, since their function is precisely to
-represent (or replace) line, page, or column breaks, which, as noted
+represent (or replace) line, page, or column beginnings, which, as noted
 above, are generally considered to be equivalent to whitespace. These
 elements provide a more reliable way of preserving the lineation,
 pagination, etc of a source document, since the encoder should not
-assume that (untagged) line breaks etc. in an XML source file will
+assume that (untagged) line beginnings etc. in an XML source file will
 necessarily be preserved. </p>
 
 <p>To control the intended tokenization, the encoder may use the
@@ -3492,11 +3492,11 @@ section <ptr target="#CORS6"/> and in section <ptr target="#SACR"/>.
 <p>When a text has no pre-existing associated reference system of any
 kind, these Guidelines recommend as a minimum that at least the page
 boundaries of the source text be marked using one of the methods
-outlined in this section.  Retaining page breaks in the markup is also
+outlined in this section.  Retaining page beginnings in the markup is also
 recommended for texts which have a detailed reference system of their
-own. Line breaks in prose texts may be, but need not be, tagged.<note place="bottom">Many encoders find it convenient to retain the line
-breaks of the original during data entry, to simplify proofreading,
-but this may be done without inserting a tag for each line break of
+own. Line beginnings in prose texts may be, but need not be, tagged.<note place="bottom">Many encoders find it convenient to retain the line
+  beginnings of the original during data entry, to simplify proofreading,
+  but this may be done without inserting a tag for each line beginning of
 the original.</note></p>
 <div type="div3" xml:id="CORS1"><head>Using the <att>xml:id</att> and <att>n</att> Attributes</head>
 <p>When traditional reference schemes represent a hierarchical
@@ -3900,7 +3900,7 @@ treated as a single word, a tagging such as the following is recommended:
   <egXML xmlns="http://www.tei-c.org/ns/Examples" xml:id="CORS5-egXML-hq" source="#NONE">
 ...sed imp<lb break="no"/>erator dixit...
 </egXML>
-Where hyphenation appears before a line or page break, the encoder may
+  Where hyphenation appears before a line or page beginning, the encoder may
 or may not choose to record the fact, either explicitly using an
 appropriate Unicode character, or descriptively for example by means
 of the <att>rend</att> attribute; see further <ptr target="#COPU-2"/>.</p>
@@ -5645,8 +5645,8 @@ metrical rather than typographic lines.  In some modern or free verse,
 it may be hard to decide whether the typographic line is to be
 regarded as a verse line or not, but the distinction is quite clear
 for verse following regular metrical patterns. Where a metrical line is
-interrupted by a typographic line break, the encoder may choose to
-ignore the fact entirely or to use the empty <gi>lb</gi> (line break)
+interrupted by a typographic line beginning, the encoder may choose to
+ignore the fact entirely or to use the empty <gi>lb</gi> (line beginning)
 element discussed in <ptr target="#CORS"/>.  By convention, the start
 of a metrical line implies the start of a typographic line; hence
 there is no need to introduce an <gi>lb</gi> tag at the start of every
@@ -5664,13 +5664,13 @@ starts  within a metrical line, as in the following example:
 In the original copy text, the presence of an ornamental capital at
 the start of the poem means that the measure is not wide enough to
 print the first four lines on four lines; instead each metrical line occupies
-two typographic lines, with a break at the point indicated. Note that
+two typographic lines, with a beginning at the point indicated. Note that
 this encoding makes no attempt to preserve information about the
 whitespace or indentation associated with either kind of line; if regarded
 as essential, this information would be recorded using the
 <att>rend</att> or <att>rendition</att> attributes discussed in <ptr target="#STGA"/>. </p>
   <p>The <gi>l</gi> element should not be used to represent typographic
-lines in non-verse materials: if the line-breaking points in a prose
+    lines in non-verse materials: if the line-beginninging points in a prose
 text are considered important for analysis, they should be marked with
 the <gi>lb</gi> element. Alternatively, a neutral segmentation element
 such as <gi>seg</gi> or <gi>ab</gi> may be used; see further

diff --git a/P5/Source/Guidelines/en/DI-PrintDictionaries.xml b/P5/Source/Guidelines/en/DI-PrintDictionaries.xml
@@ -2227,7 +2227,7 @@ following three, which help to clarify some issues raised with particular urgenc
 dictionaries, on account of the complexity of both their typography and their
 information structure.<list rend="bulleted">
 <item>(a) the <term>typographic view</term>—the
-two-dimensional printed page, including information about line and page breaks
+  two-dimensional printed page, including information about line and page beginnings
 and other features of layout </item>
 <item>(b) the <term>editorial view</term>—the one-dimensional sequence of tokens
 which can be seen as the input to the typesetting process; the wording and
@@ -2243,7 +2243,7 @@ therefore hyphenated (<q>naut-</q>
 <q>ical</q>); the typographic view of the dictionary preserves this information. In a
 purely editorial view, the particular form in which the domain name is given in the
 particular dictionary (as <q>nautical</q>, rather than <q>naut.</q>, <q>Naut.</q>, etc.)
-would be preserved, but the fact of the line break would not. Font shifts might
+  would be preserved, but the fact of the line beginning would not. Font shifts might
 plausibly be included in either a strictly typographic or an editorial view. In the
 lexical view, the only information preserved concerning domain would be some standard
 symbol or string representing the nautical domain (e.g. <q>naut.</q>) regardless of the

diff --git a/P5/Source/Guidelines/en/DS-DefaultTextStructure.xml b/P5/Source/Guidelines/en/DS-DefaultTextStructure.xml
@@ -1506,7 +1506,7 @@ the <gi>div</gi> elements containing chapters of the text itself. (For the
 <!-- ... -->
 </div>
 </egXML>
-Alternatively, the pointers in the index might link to the page breaks
+  Alternatively, the pointers in the index might link to the page beginnings
 at which a chapter begins, assuming that these have been included in
 the markup:
 <egXML xmlns="http://www.tei-c.org/ns/Examples" xml:id="DSFRONT-egXML-xd"><!-- ... -->
@@ -1629,7 +1629,7 @@ the work discussed earlier in this section: <egXML xmlns="http://www.tei-c.org/n
     </docImprint>
   </titlePage></front></egXML></p>
 <p>Second, a characteristically verbose 17th century example. Note the
-use of the <gi>lb</gi> tag to mark the line breaks of the original
+  use of the <gi>lb</gi> tag to mark the line beginnings of the original
 where necessary:
 <egXML xmlns="http://www.tei-c.org/ns/Examples" xml:id="DSTITL-egXML-dk" source="#DS-eg-06"><titlePage>
   <docTitle>
@@ -1731,7 +1731,7 @@ transcription):
 </div>
 </back></egXML>
 <!-- Smith, Wealth of Nations, 1776; index to vol 1 -->
-Note that if the page breaks in the original source have also been
+  Note that if the page beginnings in the original source have also been
 explicitly encoded, and given identifiers, the references to them in the
 above index can more usefully be recorded as links. For example,
 assuming that the encoding of page 461 of the original source starts

diff --git a/P5/Source/Guidelines/en/FT-TablesFormulaeGraphics.xml b/P5/Source/Guidelines/en/FT-TablesFormulaeGraphics.xml
@@ -255,7 +255,7 @@ this is rarely if ever done in practice.</note-->
       </p>
       <p>The content of table elements is not limited to <gi>head</gi> and
           <gi>row</gi>. Milestone elements such as <gi>cb</gi> and <gi>lb</gi>
-        allow breaks to be signalled inside tables; <gi>figure</gi> provides an
+        allow beginnings to be signalled inside tables; <gi>figure</gi> provides an
         option for including data which is not amenable to normal row and cell
         analysis; and other elements such as <gi>epigraph</gi> and
           <gi>trailer</gi> provide options for including text which is clearly

diff --git a/P5/Source/Guidelines/en/HD-Header.xml b/P5/Source/Guidelines/en/HD-Header.xml
@@ -1410,7 +1410,7 @@ it to mark italicised English words only.</p>
 <p>The <att>withId</att> attribute may optionally be used to specify
 how many of the occurrences of the element in question bear a value
 for the global <att>xml:id</att> attribute, as in the following
-example: <egXML xmlns="http://www.tei-c.org/ns/Examples" xml:id="HD57-2-egXML-kf"><tagUsage gi="pb" occurs="321" withId="321"> Marks page breaks in the York
+  example: <egXML xmlns="http://www.tei-c.org/ns/Examples" xml:id="HD57-2-egXML-kf"><tagUsage gi="pb" occurs="321" withId="321"> Marks page beginnings in the York
 (1734) edition only </tagUsage></egXML> This indicates that the
 <gi>pb</gi> element occurs 321 times, on each of which an identifier
 is provided.</p>
@@ -1518,7 +1518,7 @@ not recommended for automatic processing.</p>
   text. The <att>n</att> attribute on each <gi>div1</gi> and
   <gi>div2</gi> contains the canonical reference for each such
   division, in the form 'XX.yyy', where XX is the book number in Roman
-  numerals, and yyy the section number in arabic. Line breaks are
+  numerals, and yyy the section number in arabic. Line beginnings are
   marked by empty <gi>lb</gi> elements, each of which includes the
   through line number in Casaubon's edition as the value of its
   <gi>n</gi> attribute.</p>

diff --git a/P5/Source/Guidelines/en/NH-Non-hierarchical.xml b/P5/Source/Guidelines/en/NH-Non-hierarchical.xml
@@ -220,7 +220,7 @@ wound.</seg></p></egXML>
 	typographical and metrical line divisions correspond,
 	<gi>lb</gi> does not itself make a metrical claim: in encoding
 	verse from sources, such as Old English manuscripts, where
-	physical line breaks are not used to indicate metrical
+	physical line beginnings are not used to indicate metrical
 	lineation, the correspondence would break down entirely.</p>
 
 

diff --git a/P5/Source/Guidelines/en/PH-PrimarySources.xml b/P5/Source/Guidelines/en/PH-PrimarySources.xml
@@ -750,7 +750,7 @@ used to define a polygon of any shape using this coordinate system:-->
             <item>methods of recording editorial or other alterations to the text, such as expansion
                of abbreviations, corrections, conjectures, etc. (section <ptr target="#PHCH"/>)</item>
             <item>methods of describing important extra-linguistic phenomena in the source: unusual
-               spaces, lines, page and line breaks, changes of manuscript hand, etc. (section <ptr target="#PHPH"/>)</item>
+               spaces, lines, page and line beginnings, changes of manuscript hand, etc. (section <ptr target="#PHPH"/>)</item>
             <item>methods of representing aspects of layout such as spacing or lines <ptr target="#PHLAY"/>
             </item>
             <item>methods of representing material such as running heads, catch-words, and the like
@@ -2550,7 +2550,7 @@ referring to the zone marked in purple on the right
       <p>This approach assumes that the transcription will primarily be organized in the same way as
          the physical layout of the source, using embedded transcription elements. Alternatively,
          where the a non-embedded transcription has been provided, using the <gi>text</gi> element,
-         it is still possible to record gathering breaks, page breaks, column breaks, line breaks
+         it is still possible to record gathering beginnings, page beginnings, column beginnings, line beginnings
          etc in the source, using the elements described in section <ptr target="#CORS"/>. Detailed
          metadata about the physical make-up of a source will usually be summarized by the
             <gi>physDesc</gi> component of an <gi>msDesc</gi> element discussed in <ptr target="#msph"/>. </p>

diff --git a/P5/Source/Guidelines/en/SG-GentleIntroduction.xml b/P5/Source/Guidelines/en/SG-GentleIntroduction.xml
@@ -229,7 +229,7 @@ forth. And for certain types of analysis (most notably textual
 criticism) the physical appearance of one particular printed or
 manuscript source may be of importance:  paradoxically, one may wish to
 use descriptive markup to describe presentational features such as
-typeface, line breaks, use of whitespace and so forth.</p>
+typeface, line beginnings, use of whitespace and so forth.</p>
 
 <p>These textual structures overlap with one another in complex and
 unpredictable ways. Particularly when dealing with texts as
@@ -346,7 +346,7 @@ document.<note place="bottom">The element names here have been chosen for
 clarity of exposition; there is, however, a TEI element corresponding to
 each<!--, so that this example may be regarded as TEI-conformable in the
 sense that this term is defined in <ptr target="#CF"/>-->.</note> It will, however, serve as an introduction to the basic notions of XML.
-Whitespace and line breaks have been added to the example for the
+  Whitespace and line beginnings have been added to the example for the
 sake of visual clarity only; they have no particular significance in the
 XML encoding itself. Also, the line
 <eg><![CDATA[<!-- more poems go here   -->]]></eg>
@@ -1256,7 +1256,7 @@ only so that it can be clearly distinguished from the
 structure of the document. As suggested above, one common example is
 the need, when processing an XML document for printed output, to
 include a suggestion that the formatting processor might use to
-determine where to begin a new page of output. Page-breaking decisions
+determine where to begin a new page of output. Page-beginning decisions
 are usually best made by the formatting engine alone, but there will
 always be occasions when it may be necessary to override these. An XML
 processing instruction inserted into the document is one very simple

diff --git a/P5/Source/Guidelines/en/WD-NonStandardCharacters.xml b/P5/Source/Guidelines/en/WD-NonStandardCharacters.xml
@@ -1250,11 +1250,11 @@ precinct at Dodona. (L.H. Jeffery Archive)</head>
  is reversed, and so is their individual orientation (in fact, we see them
  <soCalled>from the back</soCalled>, as it were). <gi>seg</gi> elements
  have been used here because these are clearly not <soCalled>lines</soCalled>
- in the sense of poetic lines; the text is continuous prose, and linebreaks
+    in the sense of poetic lines; the text is continuous prose, and line beginnings
  are incidental.</p>
 
    <p>There are obviously some unsatisfactory aspects of this manner of encoding
- boustrophedon. In the inscription above, some words run across linebreaks,
+ boustrophedon. In the inscription above, some words run across line beginnings,
  so if we wished to tag both words and the right-to-left phenomena, one
  hierarchy would have to be privileged over the other. By using a transform
  function rather than a writing mode property, we are apparently suggesting

diff --git a/P5/Source/Specs/att.breaking.xml b/P5/Source/Specs/att.breaking.xml
@@ -46,7 +46,7 @@ of any adjacent whitespace</desc>
       </valList>
       <exemplum xml:lang="en">
         <p>In the following lines from the <title level="a">Dream of the Rood</title>, 
-      linebreaks occur in the middle of the words <mentioned>lāðost</mentioned> 
+      line beginnings occur in the middle of the words <mentioned>lāðost</mentioned> 
       and <mentioned>reord-berendum</mentioned>.
     </p>
         <egXML xmlns="http://www.tei-c.org/ns/Examples" xml:id="class-attr-breaking-egXML-il" xml:lang="ang">

diff --git a/P5/Source/Specs/att.edition.xml b/P5/Source/Specs/att.edition.xml
@@ -13,7 +13,7 @@
       <gloss versionDate="2019-05-20" xml:lang="ja">版</gloss>
       <desc versionDate="2013-11-22" xml:lang="en">supplies a sigil or other arbitrary identifier for the source edition in which
       the associated feature (for example, a  page, column, or line
-      break) occurs at this point in the text.</desc>
+      beginning) occurs at this point in the text.</desc>
       <desc versionDate="2009-05-28" xml:lang="fr">fournit un identifiant arbitraire pour l'édition source dans laquelle la caractéristique associée 
         (par exemple, une page, une colonne ou un saut de ligne) apparaît à ce point du texte.</desc>
       <desc versionDate="2019-05-20" xml:lang="ja">関連する属性（ページ・段落・行の切れ目）がテキストのこの地点において発生するソースのエディションについての印やその他の任意の識別子を提供する。</desc>
@@ -24,7 +24,7 @@
       <gloss versionDate="2019-05-20" xml:lang="ja">参照</gloss>
       <desc versionDate="2013-01-11" xml:lang="en">provides a pointer to the source edition in which
       the associated feature (for example, a  page, column, or line
-      break) occurs at this point in the text.</desc>
+      beginning) occurs at this point in the text.</desc>
       <desc versionDate="2019-05-20" xml:lang="ja">このポインタが示すのは、当該テキスト中に現れる（頁や段、行等の）関連する素性が生じる元の版である。</desc>
       <datatype maxOccurs="unbounded"><dataRef key="teidata.pointer"/></datatype>
     </attDef>

diff --git a/P5/Source/Specs/att.milestoneUnit.xml b/P5/Source/Specs/att.milestoneUnit.xml
@@ -21,7 +21,7 @@
       <datatype><dataRef key="teidata.enumerated"/></datatype>
       <valList type="semi">
         <valItem ident="page">
-          <desc versionDate="2012-07-16" xml:lang="en">physical page breaks (synonymous with the <gi>pb</gi> element).</desc>
+          <desc versionDate="2012-07-16" xml:lang="en">physical page beginnings (synonymous with the <gi>pb</gi> element).</desc>
           <desc versionDate="2007-12-20" xml:lang="ko">물리적 페이지 바꿈</desc>
           <desc versionDate="2007-05-02" xml:lang="zh-TW">分頁 (和元素<gi>pb</gi>同義) 。</desc>
           <desc versionDate="2008-04-06" xml:lang="es">cambio físico de página (sinónimo del elemento
@@ -33,7 +33,7 @@
             <gi>pb</gi>)</desc>
         </valItem>
         <valItem ident="column">
-          <desc versionDate="2012-07-16" xml:lang="en">column breaks.</desc>
+          <desc versionDate="2012-07-16" xml:lang="en">column beginnings.</desc>
           <desc versionDate="2007-12-20" xml:lang="ko">열 바꿈</desc>
           <desc versionDate="2007-05-02" xml:lang="zh-TW">分段。</desc>
           <desc versionDate="2008-04-06" xml:lang="es">cambio de columna.</desc>
@@ -42,7 +42,7 @@
           <desc versionDate="2007-01-21" xml:lang="it">interruzione di colonna</desc>
         </valItem>
         <valItem ident="line">
-          <desc versionDate="2012-07-16" xml:lang="en">line breaks (synonymous with the <gi>lb</gi> element).</desc>
+          <desc versionDate="2012-07-16" xml:lang="en">line beginnings (synonymous with the <gi>lb</gi> element).</desc>
           <desc versionDate="2007-12-20" xml:lang="ko">행 바꿈</desc>
           <desc versionDate="2007-05-02" xml:lang="zh-TW">分行 (和元素<gi>lb</gi>同義) 。</desc>
           <desc versionDate="2008-04-06" xml:lang="es">salto de línea (sinónimo del elemento <gi>libra</gi>).</desc>

diff --git a/P5/Source/Specs/cb.xml b/P5/Source/Specs/cb.xml
@@ -50,7 +50,7 @@
   <remarks versionDate="2013-03-31" xml:lang="en">
     <p>On this element, the global <att>n</att> attribute indicates the number or other value associated with the column
             which follows the point of insertion of this <gi>cb</gi> element. Encoders should adopt a clear and consistent policy as to
-            whether the numbers associated with column breaks relate to the physical
+            whether the numbers associated with column beginnings relate to the physical
             sequence number of the column in the whole text, or whether columns are
             numbered within the page.
             The <gi>cb</gi> element is placed at the head of the