add Jooby EPHIR and OMNI devices

vendor/jooby/ephir-rms-gmel10-codec.yaml

@@ -0,0 +1,2 @@
+uplinkDecoder:
+  fileName: analog-gasic.js

vendor/jooby/ephir-rms-gmel10-profile-eu868.yaml

@@ -0,0 +1,49 @@
+# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
+macVersion: '1.0.2'
+
+# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version:
+#   1.0:   TS001-1.0
+#   1.0.1: TS001-1.0.1
+#   1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB
+#   1.0.3: RP001-1.0.3-RevA
+#   1.0.4: RP002-1.0.0, RP002-1.0.1, RP002-1.0.2, RP002-1.0.3 or RP002-1.0.4
+#   1.1:   RP001-1.1-RevA or RP001-1.1-RevB
+regionalParametersVersion: 'RP001-1.0.2-RevB'
+
+# Whether the end device supports join (OTAA) or not (ABP)
+supportsJoin: true
+# If your device is an ABP device (supportsJoin is false), uncomment the following fields:
+# RX1 delay
+#rx1Delay: 5
+# RX1 data rate offset
+#rx1DataRateOffset: 0
+# RX2 data rate index
+#rx2DataRateIndex: 0
+# RX2 frequency (MHz)
+#rx2Frequency: 869.525
+# Factory preset frequencies (MHz)
+#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9]
+
+# Maximum EIRP
+maxEIRP: 14
+
+# Whether the end device supports 32-bit frame counters
+supports32bitFCnt: false
+
+# Whether the end device supports class B
+supportsClassB: false
+# If your device supports class B, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classBTimeout: 60
+# Ping slot period (seconds)
+#pingSlotPeriod: 128
+# Ping slot data rate index
+#pingSlotDataRateIndex: 0
+# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping.
+#pingSlotFrequency: 869.525
+
+# Whether the end device supports class C
+supportsClassC: false
+# If your device supports class C, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classCTimeout: 60

vendor/jooby/ephir-rms-gmel10.yaml

@@ -0,0 +1,67 @@
+name: ephir-rms-gmel10
+description: Jooby EPHIR RMS LoRaWAN GMEL10 100 EU KT 304862
+
+# Hardware versions (optional)
+hardwareVersions:
+  - version: '1.0'
+    numeric: 1
+
+# Firmware versions (at least one is mandatory)
+firmwareVersions:
+  - # Firmware version
+    version: '1.0'
+    numeric: 1
+    # Supported hardware versions (optional)
+    hardwareVersions:
+      - '1.0' # Must refer to hardwareVersions declared above
+    # LoRaWAN Device Profiles per region
+    # Supported regions: EU863-870, US902-928, AU915-928, AS923, CN779-787, EU433, CN470-510, KR920-923, IN865-867, RU864-870
+    profiles:
+      EU863-870:
+        id: ephir-rms-gmel10-profile-eu868
+        lorawanCertified: false
+        codec: ephir-rms-gmel10-codec
+
+# Sensors that this device features (optional)
+# Valid values are:
+# 4-20 ma, accelerometer, altitude, analog input, auxiliary, barometer, battery, button, bvoc, co, co2, conductivity,
+# current, digital input, dissolved oxygen, distance, dust, energy, gps, gyroscope, h2s, humidity, iaq, level, light,
+# lightning, link, magnetometer, moisture, motion, no, no2, o3, particulate matter, ph, pir, pm2.5, pm10, potentiometer,
+# power, precipitation, pressure, proximity, pulse count, pulse frequency, radar, rainfall, rssi, smart valve, snr, so2,
+# solar radiation, sound, strain, surface temperature, temperature, tilt, time, tvoc, uv, vapor pressure, velocity,
+# vibration, voltage, water potential, water, weight, wifi ssid, wind direction, wind speed.
+sensors:
+  - battery
+  - analog input
+  - pulse count
+
+# Dimensions in mm (optional)
+# Use width, height, length and/or diameter
+dimensions:
+  width: 92
+  length: 61
+  height: 34
+
+# Weight in grams (optional)
+weight: 42
+
+# Battery information (optional)
+battery:
+  replaceable: false
+
+# Operating conditions (optional)
+operatingConditions:
+  # Temperature (Celsius)
+  temperature:
+    min: -30
+    max: 85
+
+# IP rating (optional)
+ipCode: IP50
+
+# Product and data sheet URLs (optional)
+productURL: https://jooby.eu/rdc/jooby-ephir-rms-100/
+dataSheetURL: https://jooby.eu/wp-content/uploads/2023/09/20230526_Jooby_RDC_Datasheet_RM_Elster_EN_web-3.pdf
+
+photos:
+  main: ephir-rms-gmel10.png

vendor/jooby/ephir-rms-gmme10-codec.yaml

@@ -0,0 +1,2 @@
+uplinkDecoder:
+  fileName: analog-gasi3.js

vendor/jooby/ephir-rms-gmme10-profile-eu868.yaml

@@ -0,0 +1,49 @@
+# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
+macVersion: '1.0.2'
+
+# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version:
+#   1.0:   TS001-1.0
+#   1.0.1: TS001-1.0.1
+#   1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB
+#   1.0.3: RP001-1.0.3-RevA
+#   1.0.4: RP002-1.0.0, RP002-1.0.1, RP002-1.0.2, RP002-1.0.3 or RP002-1.0.4
+#   1.1:   RP001-1.1-RevA or RP001-1.1-RevB
+regionalParametersVersion: 'RP001-1.0.2-RevB'
+
+# Whether the end device supports join (OTAA) or not (ABP)
+supportsJoin: true
+# If your device is an ABP device (supportsJoin is false), uncomment the following fields:
+# RX1 delay
+#rx1Delay: 5
+# RX1 data rate offset
+#rx1DataRateOffset: 0
+# RX2 data rate index
+#rx2DataRateIndex: 0
+# RX2 frequency (MHz)
+#rx2Frequency: 869.525
+# Factory preset frequencies (MHz)
+#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9]
+
+# Maximum EIRP
+maxEIRP: 14
+
+# Whether the end device supports 32-bit frame counters
+supports32bitFCnt: false
+
+# Whether the end device supports class B
+supportsClassB: false
+# If your device supports class B, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classBTimeout: 60
+# Ping slot period (seconds)
+#pingSlotPeriod: 128
+# Ping slot data rate index
+#pingSlotDataRateIndex: 0
+# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping.
+#pingSlotFrequency: 869.525
+
+# Whether the end device supports class C
+supportsClassC: false
+# If your device supports class C, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classCTimeout: 60

vendor/jooby/ephir-rms-gmme10.yaml

@@ -0,0 +1,67 @@
+name: ephir-rms-gmme10
+description: Jooby EPHIR RMS LoRaWAN GMME10 103 EU КТ 304866
+
+# Hardware versions (optional)
+hardwareVersions:
+  - version: '1.0'
+    numeric: 1
+
+# Firmware versions (at least one is mandatory)
+firmwareVersions:
+  - # Firmware version
+    version: '1.0'
+    numeric: 1
+    # Supported hardware versions (optional)
+    hardwareVersions:
+      - '1.0' # Must refer to hardwareVersions declared above
+    # LoRaWAN Device Profiles per region
+    # Supported regions: EU863-870, US902-928, AU915-928, AS923, CN779-787, EU433, CN470-510, KR920-923, IN865-867, RU864-870
+    profiles:
+      EU863-870:
+        id: ephir-rms-gmme10-profile-eu868
+        lorawanCertified: false
+        codec: ephir-rms-gmme10-codec
+
+# Sensors that this device features (optional)
+# Valid values are:
+# 4-20 ma, accelerometer, altitude, analog input, auxiliary, barometer, battery, button, bvoc, co, co2, conductivity,
+# current, digital input, dissolved oxygen, distance, dust, energy, gps, gyroscope, h2s, humidity, iaq, level, light,
+# lightning, link, magnetometer, moisture, motion, no, no2, o3, particulate matter, ph, pir, pm2.5, pm10, potentiometer,
+# power, precipitation, pressure, proximity, pulse count, pulse frequency, radar, rainfall, rssi, smart valve, snr, so2,
+# solar radiation, sound, strain, surface temperature, temperature, tilt, time, tvoc, uv, vapor pressure, velocity,
+# vibration, voltage, water potential, water, weight, wifi ssid, wind direction, wind speed.
+sensors:
+  - battery
+  - analog input
+  - pulse count
+
+# Dimensions in mm (optional)
+# Use width, height, length and/or diameter
+dimensions:
+  width: 102
+  length: 56
+  height: 37
+
+# Weight in grams (optional)
+weight: 48
+
+# Battery information (optional)
+battery:
+  replaceable: false
+
+# Operating conditions (optional)
+operatingConditions:
+  # Temperature (Celsius)
+  temperature:
+    min: -30
+    max: 85
+
+# IP rating (optional)
+ipCode: IP50
+
+# Product and data sheet URLs (optional)
+productURL: https://jooby.eu/rdc/jooby-ephir-rms-103/
+dataSheetURL: https://jooby.eu/wp-content/uploads/2023/09/20230526_Jooby_RDC_Datasheet_RM_METRIX_EN_web-4.pdf
+
+photos:
+  main: ephir-rms-gmme10.png

vendor/jooby/ephir-rms-gmsg10-codec.yaml

@@ -0,0 +1,2 @@
+uplinkDecoder:
+  fileName: analog-gasi3.js

vendor/jooby/ephir-rms-gmsg10-profile-eu868.yaml

@@ -0,0 +1,49 @@
+# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
+macVersion: '1.0.2'
+
+# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version:
+#   1.0:   TS001-1.0
+#   1.0.1: TS001-1.0.1
+#   1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB
+#   1.0.3: RP001-1.0.3-RevA
+#   1.0.4: RP002-1.0.0, RP002-1.0.1, RP002-1.0.2, RP002-1.0.3 or RP002-1.0.4
+#   1.1:   RP001-1.1-RevA or RP001-1.1-RevB
+regionalParametersVersion: 'RP001-1.0.2-RevB'
+
+# Whether the end device supports join (OTAA) or not (ABP)
+supportsJoin: true
+# If your device is an ABP device (supportsJoin is false), uncomment the following fields:
+# RX1 delay
+#rx1Delay: 5
+# RX1 data rate offset
+#rx1DataRateOffset: 0
+# RX2 data rate index
+#rx2DataRateIndex: 0
+# RX2 frequency (MHz)
+#rx2Frequency: 869.525
+# Factory preset frequencies (MHz)
+#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9]
+
+# Maximum EIRP
+maxEIRP: 14
+
+# Whether the end device supports 32-bit frame counters
+supports32bitFCnt: false
+
+# Whether the end device supports class B
+supportsClassB: false
+# If your device supports class B, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classBTimeout: 60
+# Ping slot period (seconds)
+#pingSlotPeriod: 128
+# Ping slot data rate index
+#pingSlotDataRateIndex: 0
+# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping.
+#pingSlotFrequency: 869.525
+
+# Whether the end device supports class C
+supportsClassC: false
+# If your device supports class C, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classCTimeout: 60

vendor/jooby/ephir-rms-gmsg10.yaml

@@ -0,0 +1,67 @@
+name: ephir-rms-gmsg10
+description: Jooby EPHIR RMS LoRaWAN GMSG10 105 EU KT 304870
+
+# Hardware versions (optional)
+hardwareVersions:
+  - version: '1.0'
+    numeric: 1
+
+# Firmware versions (at least one is mandatory)
+firmwareVersions:
+  - # Firmware version
+    version: '1.0'
+    numeric: 1
+    # Supported hardware versions (optional)
+    hardwareVersions:
+      - '1.0' # Must refer to hardwareVersions declared above
+    # LoRaWAN Device Profiles per region
+    # Supported regions: EU863-870, US902-928, AU915-928, AS923, CN779-787, EU433, CN470-510, KR920-923, IN865-867, RU864-870
+    profiles:
+      EU863-870:
+        id: ephir-rms-gmsg10-profile-eu868
+        lorawanCertified: false
+        codec: ephir-rms-gmsg10-codec
+
+# Sensors that this device features (optional)
+# Valid values are:
+# 4-20 ma, accelerometer, altitude, analog input, auxiliary, barometer, battery, button, bvoc, co, co2, conductivity,
+# current, digital input, dissolved oxygen, distance, dust, energy, gps, gyroscope, h2s, humidity, iaq, level, light,
+# lightning, link, magnetometer, moisture, motion, no, no2, o3, particulate matter, ph, pir, pm2.5, pm10, potentiometer,
+# power, precipitation, pressure, proximity, pulse count, pulse frequency, radar, rainfall, rssi, smart valve, snr, so2,
+# solar radiation, sound, strain, surface temperature, temperature, tilt, time, tvoc, uv, vapor pressure, velocity,
+# vibration, voltage, water potential, water, weight, wifi ssid, wind direction, wind speed.
+sensors:
+  - battery
+  - analog input
+  - pulse count
+
+# Dimensions in mm (optional)
+# Use width, height, length and/or diameter
+dimensions:
+  width: 97
+  length: 45
+  height: 32
+
+# Weight in grams (optional)
+weight: 50
+
+# Battery information (optional)
+battery:
+  replaceable: false
+
+# Operating conditions (optional)
+operatingConditions:
+  # Temperature (Celsius)
+  temperature:
+    min: -30
+    max: 85
+
+# IP rating (optional)
+ipCode: IP50
+
+# Product and data sheet URLs (optional)
+productURL: https://jooby.eu/rdc/jooby-ephir-rms-105/
+dataSheetURL: https://jooby.eu/wp-content/uploads/2023/09/20230322_Jooby_RDC_Datasheet_RM_Samgaz_EN_web-3.pdf
+
+photos:
+  main: ephir-rms-gmsg10.png

vendor/jooby/index.yaml

@@ -1,2 +1,6 @@
 endDevices:
+  - ephir-rms-gmel10
+  - ephir-rms-gmme10
+  - ephir-rms-gmsg10
   - mtx1
+  - omni-rm-4pu204eu