Create a LearnBot

Create a LearnBot yourself

Note: This page is going to be updated

If you want build your LearnBot you should follow the next steps:ç

You should buy the items of the next list:

Name of component	Units	Seller	Link
Raspberry pi3 Model b	1	Bricogeek	http://tienda.bricogeek.com/placas-raspberry-pi/811-raspberry-pi-3.html
Dual motor driver	1	Pololu	https://www.pololu.com/product/2753/specs
Battery	1	hobbyreal	http://www.hobbyreal.com/es-gaoneng-gnb-7-4v-5000mah-2s-120c-lipo-battery-t-plug-for-rc-car-p244759.htm?source=ProductListAds&id=378221013048&currency=eur&country=ES&gclid=EAIaIQobChMIyZ-MnY_a2QIV1xyBCh3XRg5pEAkYCyABEgK7DvD_BwE
Ball caster	2	Pololu	https://www.pololu.com/product/953
Camera	1	thepihut	https://thepihut.com/products/adafruit-spy-camera-for-the-raspberry-pi
Wheel	2	Bricogeek	http://tienda.bricogeek.com/robotica/109-rueda-todo-terreno-42x19mm.html
Motor	2	Bricogeek	http://tienda.bricogeek.com/motores/114-motor-micro-metal-dc-con-reductora-30-1.html
Switch	1	Bricogeek	http://tienda.bricogeek.com/interruptores/200-interruptor-on-off-cuadrado.html
Screen 3,5'	1	Bricogeek	http://tienda.bricogeek.com/pantallas-raspberry-pi/766-pantalla-tft-35-pitft-plus-resistiva.html
Servomotor	1	Bricogeek	http://tienda.bricogeek.com/servomotores/968-micro-servo-miniatura-sg90.html
16-Channel 12-bit PWM	1	adafruit	https://www.adafruit.com/product/815
Expansion Extension Board	1	amazon	https://www.amazon.com/Makerfocus-Raspberry-Model-Expansion-Extension/dp/B06WWRZ7PS
RIBBON CABLE	1	modmypi	https://www.modmypi.com/raspberry-pi/gpio-and-breadboarding/40-pin-ribbon-cables/40-pin-gpio-male-to-female-ribbon-cable-150mm-(gertboard)

You should print the items of the next list:

All files are on this repository in branch desings in folder desingsForEdit/Learnbot2.1/STL/.

You should see the next video to see the steps.

Sorry for the inconvenience, this video isn't available yet.

The displ