forked from opencomputeproject/SAI
-
Notifications
You must be signed in to change notification settings - Fork 0
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
[Test]Add Fdb test plan (opencomputeproject#1526)
Add FDB test plan. It includes: Test Group1: MAC learning Case1: test_vlan_port_learn_disable Case2: test_bg_port_learn_disable Case3: test_non_bgPort_no_learn Case4: test_new_vlan_member_learn Case5: test_remove_vlan_member_no_learn Case6: test_no_learn_invalidate_vlan Case7: test_no_learn_broadcast_src Case8: test_no_learn_multicast_src Test Group2: FDB age Case1: test_port_age Case2: test_aging_after_move Test Group3: FDB flush Case1: test_flush_vlan_static Case2: test_flush_vlan_dynamic Case3: test_flush_port_static Case4: test_flush_port_dynamic Case5: test_flush_all_static Case6: test_flush_all_dynamic Case7: test_flush_all Test Group4: MAC move Case1: test_disable_move_drop Case2: test_dynamic_mac_move Case3: test_static_mac_move Signed-off-by: richardyu-ms <[email protected]>
- Loading branch information
1 parent
0f0683c
commit e56c554
Showing
1 changed file
with
318 additions
and
0 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,318 @@ | ||
| # SAI FDB Test plan <!-- omit in toc --> | ||
|
|
||
| - [Test Configuration](#test-configuration) | ||
| - [Test Execution](#test-execution) | ||
| - [Test Execution](#test-execution-1) | ||
| - [Common Test Data/Packet](#common-test-datapacket) | ||
| - [Test Group1: MAC learning](#test-group1-mac-learning) | ||
| - [Case1: test_vlan_port_learn_disable](#case1-test_vlan_port_learn_disable) | ||
| - [Case2: test_bg_port_learn_disable](#case2-test_bg_port_learn_disable) | ||
| - [Case3: test_non_bgPort_no_learn](#case3-test_non_bgport_no_learn) | ||
| - [Case4: test_new_vlan_member_learn](#case4-test_new_vlan_member_learn) | ||
| - [Case5: test_remove_vlan_member_no_learn](#case5-test_remove_vlan_member_no_learn) | ||
| - [Case6: test_no_learn_invalidate_vlan](#case6-test_no_learn_invalidate_vlan) | ||
| - [Case7: test_no_learn_broadcast_src](#case7-test_no_learn_broadcast_src) | ||
| - [Case8: test_no_learn_multicast_src](#case8-test_no_learn_multicast_src) | ||
| - [Test Group2: FDB age](#test-group2-fdb-age) | ||
| - [Case1: test_port_age](#case1-test_port_age) | ||
| - [Case2: test_aging_after_move](#case2-test_aging_after_move) | ||
| - [Case3: test_mac_moving_after_aging](#case3-test_mac_moving_after_aging) | ||
| - [Test Group3: FDB flush](#test-group3-fdb-flush) | ||
| - [Case1: test_flush_vlan_static](#case1-test_flush_vlan_static) | ||
| - [Case2: test_flush_vlan_dynamic](#case2-test_flush_vlan_dynamic) | ||
| - [Case3: test_flush_port_static](#case3-test_flush_port_static) | ||
| - [Case4: test_flush_port_dynamic](#case4-test_flush_port_dynamic) | ||
| - [Case5: test_flush_all_static](#case5-test_flush_all_static) | ||
| - [Case6: test_flush_all_dynamic](#case6-test_flush_all_dynamic) | ||
| - [Case7: test_flush_all](#case7-test_flush_all) | ||
| - [Test Group4: MAC move](#test-group4-mac-move) | ||
| - [Case1: test_disable_move_drop](#case1-test_disable_move_drop) | ||
| - [Case2: test_dynamic_mac_move](#case2-test_dynamic_mac_move) | ||
| - [Case3: test_static_mac_move](#case3-test_static_mac_move) | ||
|
|
||
| # Test Configuration | ||
|
|
||
| For the test configuration, please refer to the file | ||
| - [Config_t0](./config_data/config_t0.md) | ||
|
|
||
| **Note. All the tests will be based on the configuration above, if any additional configuration is required, it will be specified in the Test case.** | ||
|
|
||
| # Test Execution | ||
|
|
||
| # Test Execution | ||
|
|
||
| ## Common Test Data/Packet | ||
| In this FDB test, the example packet structure is below. | ||
| - Simple L2 packet | ||
| ```python | ||
| simple_udp_packet(eth_dst=dmac, | ||
| eth_src=smac) | ||
| ``` | ||
| - VLAN | ||
| ```Python | ||
| simple_udp_packet(eth_dst=dmsc, | ||
| eth_src=smac, | ||
| vlan_vid=lvlan_id) | ||
| ``` | ||
|
|
||
| **Note. If need other kinds of packets, they will be added to the test case/group respectively.** | ||
|
|
||
| ## Test Group1: MAC learning | ||
| ### Case1: test_vlan_port_learn_disable | ||
| ### Case2: test_bg_port_learn_disable | ||
| ### Case3: test_non_bgPort_no_learn | ||
| ### Case4: test_new_vlan_member_learn | ||
| ### Case5: test_remove_vlan_member_no_learn | ||
| ### Case6: test_no_learn_invalidate_vlan | ||
| ### Case7: test_no_learn_broadcast_src | ||
| ### Case8: test_no_learn_multicast_src | ||
|
|
||
| ### Testing Objective <!-- omit in toc --> | ||
| - test_vlan_port_learn_disable: Verify if MAC addresses are not learned on the port when VLAN port is disabled. | ||
| - test_bg_port_learn_disable: Verify if MAC addresses are not learned on the port whenbridge port learning is disabled. | ||
| - test_non_bgPort_no_learn: Verify if MAC addresses are not learned on the port when the port is not a bridge port. | ||
| - test_new_vlan_member_learn: Verify newly added VLAN members can learn. | ||
| - test_remove_vlan_member_no_learn: Verify no MAC addresses are learned on the removed vlan member. | ||
| - test_no_learn_invalidate_vlan: Verify no MAC addresses are learned on invalidate vlan ID. | ||
| - test_no_learn_broadcast_src: Verify broadcast mac address is not learned. | ||
| - test_no_learn_multicast_src: Verify multicast mac address is not learned. | ||
|
|
||
| ### Test steps: <!-- omit in toc --> | ||
|
|
||
| - test_vlan_port_learn_disable | ||
|
|
||
| 1. Flush all MAC | ||
| 2. Disable MAC learn on VLAN10 | ||
| 3. Create a packet with SMAC ``MacX`` | ||
| 4. send packet from port1 | ||
| 5. Verify the packet flood to other VLAN10 ports | ||
| 6. Create a packet with DMAC ``MacX`` | ||
| 7. send the packet on port2 | ||
| 8. Verify the packet flood to other VLAN10 ports, including port1 | ||
| 9. check FDB entries, no new entry | ||
|
|
||
| - test_bg_port_learn_disable | ||
|
|
||
| 1. Flush all MAC | ||
| 2. Disable MAC learn on Port1(Bridge Port1) | ||
| 3. Create a packet with SMAC ``MacX`` | ||
| 4. send packet from port1 | ||
| 5. Verify the packet flood to other VLAN10 ports | ||
| 6. Create a packet with DMAC ``MacX`` | ||
| 7. send the packet on port2 | ||
| 8. Verify the packet flood to other VLAN10 ports, including port1 | ||
| 9. check FDB entries, no new entry | ||
|
|
||
| - test_non_bgPort_no_learn | ||
|
|
||
| 1. Flush all MAC | ||
| 2. Removed Port1 from Bridge Port1 for each case | ||
| 3. Create a packet with SMAC ``MacX`` | ||
| 4. send packet from port1 | ||
| 5. Verify the packet flood to other VLAN10 ports | ||
| 6. Create a packet with DMAC ``MacX`` | ||
| 7. send the packet on port2 | ||
| 8. Verify the packet flood to other VLAN10 ports, including port1 | ||
| 9. check FDB entries, no new entry | ||
|
|
||
| - test_new_vlan_member_learn | ||
|
|
||
| 1. Add Port24 to VLAN10 | ||
| 2. Create Packet with SMAC=``MacX`` DMAC=``Port1 MAC`` | ||
| 3. Send packet on port24 | ||
| 4. verify only receive a packet on port1 | ||
| 5. Create a packet with DMAC=``MacX`` | ||
| 6. Send packet on port1 | ||
| 7. Verify only receive a packet on port24 | ||
| 8. check FDB entries, new entry ``MacX`` on Port24 learned | ||
|
|
||
| - test_remove_vlan_member_learn | ||
|
|
||
| 1. Remove Port2 from VLAN10 | ||
| 2. Create a Packet with SMAC=``MacX`` and VLAN10 tag | ||
| 3. Send packet on port2 | ||
| 4. Verify no packet was received on any port | ||
| 5. Create a packet with DMAC=``MacX`` and VLAN10 tag | ||
| 6. Send packet on port1 | ||
| 7. Verify flooding to VLAN10 ports, no packet on port2 | ||
| 8. check FDB entries, no new entry | ||
|
|
||
| - test_no_learn_invalidate_vlan | ||
| - test_no_learn_broadcast_src | ||
| - test_no_learn_multicast_src | ||
|
|
||
| 1. Create a packet with vlan_id=``VLAN11`` SMAC=``MacX``/SMAC=``broadcast address``/SMAC=``multicast address`` | ||
| 2. Send packet on port2 | ||
| 3. Verify no packet was received on any port | ||
| 4. Create a packet with vlan_id=``VLAN11`` DMAC=``MacX``/DMAC=``broadcast address``/DMAC=``multicast address`` | ||
| 5. Send packet on port1 | ||
| 6. Dropped for ``VLAN11``, For broadcast and multicast address, flooding on all vlan10 ports, except port1 | ||
| 7. check FDB entries, no new entry | ||
|
|
||
|
|
||
| ## Test Group2: FDB age | ||
| ### Case1: test_port_age | ||
| ### Case2: test_aging_after_move | ||
| ### Case3: test_mac_moving_after_aging | ||
| ### Testing Objective <!-- omit in toc --> | ||
| - test_port_age: Verifying if the dynamic FDB entry associated with the port is removed after the aging interval. | ||
| - test_aging_after_move: Verifying the aging time refreshed if dynamic FDB entry associated with one port and then moved to another port (not the initial learning time) | ||
| - test_mac_moving_after_aging: Verifying the mac can be learnt again after the mac aging reached. | ||
|
|
||
|
|
||
| ### Test steps: <!-- omit in toc --> | ||
| - test_port_age | ||
|
|
||
| 1. Set FDB aging time=10 | ||
| 2. Create Packet with SMAC=``MacX`` DMAC=``Port1 MAC`` | ||
| 3. Send packet on port2 | ||
| 4. verify only receive a packet on port1 | ||
| 5. Create a packet with DMAC=``MacX`` | ||
| 6. Send packet on port1 | ||
| 7. Verify only receive a packet on port2 | ||
| 8. Wait for the ``aging`` time | ||
| 9. Send packet on port1 | ||
| 10. Verify flooding packet to VLAN10 ports, except port1 | ||
|
|
||
| - test_aging_after_move | ||
|
|
||
| 1. Set FDB aging time=10 | ||
| 2. Create Packet with SMAC=``MacX`` DMAC=``Port1 MAC`` | ||
| 3. Send packet on port2 | ||
| 4. verify only receive a packet on port1 | ||
| 5. Create a packet with DMAC=``MacX`` | ||
| 6. Send packet on port1 | ||
| 7. Verify only receive a packet on port2 | ||
| 8. Send packet on port3 | ||
| 7. Verify only receive a packet on port2 | ||
| 9. Wait for the ``aging`` time | ||
| 10. Send packet on port3 | ||
| 11. Verify flooding packet to VLAN10 ports, except port3 | ||
|
|
||
| - test_mac_moving_after_aging | ||
|
|
||
| 1. Set FDB aging time=10 | ||
| 2. Create Packet with SMAC=``MacX`` DMAC=``Port1 MAC`` | ||
| 3. Send packet on port2 | ||
| 4. verify only receive a packet on port1 | ||
| 5. Create a packet with DMAC=``MacX`` | ||
| 6. Send packet on port1 | ||
| 7. Verify only receive a packet on port2 | ||
| 8. Wait for the ``aging`` time | ||
| 9. Create Packet with SMAC=``MacX`` DMAC=``Port1 MAC`` | ||
| 10. Send packet on port3(mac moved from Port2 to Port3) | ||
| 11. verify only receive a packet on port1 | ||
| 12. Create and send a packet with DMAC=``MacX`` | ||
| 13. Verify only receive a packet on port3 | ||
|
|
||
| ## Test Group3: FDB flush | ||
| ### Case1: test_flush_vlan_static | ||
| ### Case2: test_flush_vlan_dynamic | ||
| ### Case3: test_flush_port_static | ||
| ### Case4: test_flush_port_dynamic | ||
| ### Case5: test_flush_all_static | ||
| ### Case6: test_flush_all_dynamic | ||
| ### Case7: test_flush_all | ||
|
|
||
| ### Testing Objective <!-- omit in toc --> | ||
| Verify flushing of static/dynamic entries on VLAN/Port/All. | ||
| ### Test steps: <!-- omit in toc --> | ||
| - test_flush_vlan_static | ||
|
|
||
| 1. Flush with condition for each case: ``Static`` flush on ``VLAN10`` | ||
| 2. Send packets: ``port1`` DMAC=``Port2 MAC`` | ||
| 3. Verify flooding happened, packets received in related VLAN, except the ingress port. | ||
| 4. Send packets: ``Port9`` DMAC=``Port10 MAC`` | ||
| 5. Verify unicast to the corresponding port | ||
|
|
||
| - test_flush_port_static | ||
|
|
||
| 1. Flush with condition: ``Static`` flush on ``Port1`` | ||
| 2. Send packets: ``Port2`` DMAC=``Port1 MAC`` | ||
| 3. Verify flooding happened, packets received in related VLAN, except the ingress port. | ||
| 4. Send packets: ``Port10`` DMAC=``Port9 MAC`` | ||
| 5. Verify unicast to the corresponding port | ||
|
|
||
| - test_flush_all_static | ||
|
|
||
| 1. Flush with condition: flush for all ``Static`` | ||
| 2. Send packets for each case in sequence:``port1`` DMAC=``Port2 MAC`` | ||
| 3. Verify flooding happened, packets received in related VLAN, except the ingress port. | ||
| 4. Send packets:``Port9`` DMAC=``Port10 MAC`` | ||
| 5. Verify flush happens in a certain domain | ||
|
|
||
| - test_flush_vlan_dynamic | ||
|
|
||
| 1. Flush with condition: ``Dynamic`` flush on ``VLAN20`` | ||
| 2. Send packets for each case in sequence: ``Port9`` DMAC=``Port10 MAC`` | ||
| 3. Verify flooding happened, packets received in related VLAN, except the ingress port. | ||
| 4. Send packets for each case in sequence: ``port1`` DMAC=``Port2 MAC`` | ||
| 5. Verify unicast to the corresponding port | ||
|
|
||
|
|
||
| - test_flush_port_dynamic | ||
|
|
||
| 1. Flush with condition: ``Dynamic`` flush on ``Port9`` | ||
| 2. Send packets: ``Port10`` DMAC=``Port9 MAC`` | ||
| 3. Verify flooding happened, packets received in related VLAN, except the ingress port. | ||
| 4. Send packets: ``Port2`` DMAC=``Port1 MAC`` | ||
| 5. Verify unicast to the corresponding port | ||
|
|
||
|
|
||
| - test_flush_all_dynamic | ||
|
|
||
| 1. Flush with condition: flush for all ``Dynamic`` | ||
| 2. Send packets for each case in sequence: ``Port9`` DMAC=``Port10 MAC`` | ||
| 3. Verify flooding happened, packets received in related VLAN, except the ingress port. | ||
| 4. Send packets for each case in sequence: ``port1`` DMAC=``Port2 MAC`` | ||
| 5. Verify flush happens in a certain domain | ||
|
|
||
| - test_flush_all | ||
|
|
||
| 1. Flush with conditions: flush for ``All`` | ||
| 2. Send packets : ``port1`` DMAC=``Port2 MAC``; ``Port9`` DMAC=``Port10 MAC``; | ||
| 3. Verify flooding happened, packets received in related VLAN, except the ingress port. | ||
|
|
||
|
|
||
| ## Test Group4: MAC move | ||
| ### Case1: test_disable_move_drop | ||
| ### Case2: test_dynamic_mac_move | ||
| ### Case3: test_static_mac_move | ||
| ### Testing Objective <!-- omit in toc --> | ||
| - test_disable_move_drop: Verify if disable MAC move, drop packet with known SMAC if the SMAC was already learnt on other port. | ||
| - test_dynamic_mac_move: Verify when enabling MAC move, previous learnt mac(SMAC) on a port can be learnt on other port | ||
| - test_static_mac_move: Verify when enabling MAC move, previous installed mac(static SMAC) on a port can be set to other port | ||
|
|
||
| ### Test steps: <!-- omit in toc --> | ||
| - test_disable_move_drop | ||
|
|
||
| 1. Disable mac move for ``Port1 MAC`` on Port1 | ||
| 2. Create a packet with SMAC=``Port1 MAC`` DMAC=``Port2 MAC`` | ||
| 3. Send packet on port1 | ||
| 4. Verify packet received on port2 | ||
| 5. Send packet in step2 on port3 | ||
| 6. Verify the packet gets dropped | ||
|
|
||
| - test_dynamic_mac_move | ||
|
|
||
| 1. Flush All MAC | ||
| 2. Install static FDB entry for port2 with ``Port2 MAC``(with allow_mac_move as true) | ||
| 3. Send Packet on Port1 with SMAC=``Port1 MAC`` DMAC=``Port2 MAC`` | ||
| 4. Verify packet received on port2 | ||
| 5. Send packet in step2 on port3 | ||
| 8. Verify packet received on port2 | ||
| 9. Send packet with DMAC=``Port1 MAC`` SMAC=``Port2 MAC`` on Port2 | ||
| 10. Verify packet received on port3 | ||
|
|
||
| - test_static_mac_move | ||
|
|
||
| 1. Flush All MAC | ||
| 2. Install static FDB entry for port2 with ``Port2 MAC`` | ||
| 3. Install static FDB entry for port1 with ``Port1 MAC`` | ||
| 4. Enable mac move for ``Port1 MAC`` on Port1 | ||
| 5. Create packet with SMAC=``Port1 MAC`` DMAC=``Port2 MAC`` | ||
| 6. Send packet on port1 | ||
| 7. Verify packet received on port2 | ||
| 8. Install static FDB entry for port3 with ``Port1 MAC`` | ||
| 9. Send packet in step2 on port3 | ||
| 10. Verify packet received on port2 |