add .ino sketch

variants/sensebox_mcu_esp32s2/APOTA.ino

@@ -0,0 +1,182 @@
+#define DISPLAY_ENABLED
+
+#include <WiFi.h>
+#include <WebServer.h>
+#include <ESPmDNS.h>
+#include <WiFiAP.h>
+#include <Update.h>
+#include <Wire.h>
+#ifdef DISPLAY_ENABLED
+#define SCREEN_WIDTH 128
+#define SCREEN_HEIGHT 64
+#define OLED_RESET -1
+#include <Adafruit_GFX.h>
+#include <Adafruit_SSD1306.h>
+Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
+#include <Adafruit_NeoPixel.h>
+ Adafruit_NeoPixel rgb_led_1= Adafruit_NeoPixel(1, 1,NEO_GRB + NEO_KHZ800);
+
+
+#endif
+#include "esp_partition.h"
+#include "esp_ota_ops.h"
+#include "esp_system.h"
+
+String ssid;
+uint8_t mac[6];
+
+
+// Create an instance of the server
+WebServer server(80);
+bool displayEnabled;
+
+const int BUTTON_PIN = 0;   // GPIO für den Button
+volatile unsigned long lastPressTime = 0;  // Zeitpunkt des letzten Drucks
+volatile bool doublePressDetected = false; // Flag für Doppeldruck
+const unsigned long doublePressInterval = 500; // Max. Zeit (in ms) zwischen zwei Drücken für Doppeldruck
+volatile int pressCount = 0;  // Zählt die Button-Drucke
+
+void IRAM_ATTR handleButtonPress() {
+    unsigned long currentTime = millis();  // Hole aktuelle Zeit
+
+    // Vermeidung von Prellen: Wenn der aktuelle Druck zu nahe am letzten liegt, ignoriere ihn
+    if (currentTime - lastPressTime > 50) {
+        pressCount++;  // Zähle den Button-Druck
+        lastPressTime = currentTime;  // Aktualisiere die Zeit des letzten Drückens
+
+        // Überprüfe, ob dies der zweite Druck innerhalb des Double-Press-Intervalls ist
+        if (pressCount == 2 && (currentTime - lastPressTime <= doublePressInterval)) {
+            doublePressDetected = true;  // Doppeldruck erkannt
+            pressCount = 0;  // Zähler zurücksetzen
+        }
+    }
+}
+
+// Funktion zum Wechseln der Boot-Partition auf OTA1
+void setBootPartitionToOTA0() {
+    const esp_partition_t* ota0_partition = esp_partition_find_first(
+        ESP_PARTITION_TYPE_APP, ESP_PARTITION_SUBTYPE_APP_OTA_0, NULL);
+
+    if (ota0_partition) {
+        // Setze OTA1 als neue Boot-Partition
+        esp_ota_set_boot_partition(ota0_partition);
+        Serial.println("Boot partition changed to OTA0. Restarting...");
+
+        // Neustart, um von der neuen Partition zu booten
+        esp_restart();
+    } else {
+        Serial.println("OTA1 partition not found!");
+    }
+}
+
+void setupDisplay() {
+  displayEnabled =  display.begin(SSD1306_SWITCHCAPVCC, 0x3D);
+  if(displayEnabled) {
+    display.display();
+    delay(100);
+    display.clearDisplay();
+  }
+}
+
+void displaySSID() {
+  display.setCursor(0, 0);
+  display.setTextSize(1);
+  display.setTextColor(WHITE, BLACK);
+  display.println("Verbinde dich mit dem Access Point:");
+  display.setTextSize(1);
+  display.println();
+  display.setCursor(10, 32);
+  display.println(ssid);
+  display.display();
+  display.clearDisplay();
+}
+
+void setupWiFi() {
+  WiFi.macAddress(mac);
+  char macLastFour[5];
+  snprintf(macLastFour, sizeof(macLastFour), "%02X%02X", mac[4], mac[5]);
+  ssid = "senseBox:" + String(macLastFour);
+
+  // Definiere die IP-Adresse, Gateway und Subnetzmaske
+  IPAddress local_IP(192.168.1.1);      // Die neue IP-Adresse
+  IPAddress gateway(192.168.1.1);       // Gateway-Adresse (kann gleich der IP des APs sein)
+  IPAddress subnet(255.255.255.0);      // Subnetzmaske
+
+  // Setze die IP-Adresse, Gateway und Subnetzmaske des Access Points
+  WiFi.softAPConfig(local_IP, gateway, subnet);
+
+  // Starte den Access Point
+  WiFi.softAP(ssid.c_str());
+}
+
+void setupOTA() {
+  // Handle updating process
+  server.on("/sketch", HTTP_POST, []() {
+    server.sendHeader("Connection", "close");
+    server.send(200, "text/plain", (Update.hasError()) ? "FAIL" : "OK");
+    ESP.restart();
+  }, []() {
+    HTTPUpload& upload = server.upload();
+
+    if (upload.status == UPLOAD_FILE_START) {
+      Serial.setDebugOutput(true);
+      Serial.printf("Update: %s\n", upload.filename.c_str());
+      if (!Update.begin(UPDATE_SIZE_UNKNOWN)) { //start with max available size
+        Update.printError(Serial);
+      }
+    } else if (upload.status == UPLOAD_FILE_WRITE) {
+      /* flashing firmware to ESP*/
+      if (Update.write(upload.buf, upload.currentSize) != upload.currentSize) {
+        Update.printError(Serial);
+      }
+    } else if (upload.status == UPLOAD_FILE_END) {
+      if (Update.end(true)) { //true to set the size to the current progress
+        Serial.printf("Update Success: %u\nRebooting...\n", upload.totalSize);
+      } else {
+        Update.printError(Serial);
+      }
+      Serial.setDebugOutput(false);
+    }
+    yield();
+  });
+}
+
+void setup() {
+  // Start Serial communication
+  Serial.begin(115200);
+  rgb_led_1.begin();
+  rgb_led_1.setBrightness(30);
+  rgb_led_1.setPixelColor(0,rgb_led_1.Color(51, 51, 255));
+  rgb_led_1.show();
+
+  // Button-Pin als Input konfigurieren
+  pinMode(BUTTON_PIN, INPUT_PULLUP);
+
+  // Interrupt für den Button
+  attachInterrupt(digitalPinToInterrupt(BUTTON_PIN), handleButtonPress, FALLING);
+
+  #ifdef DISPLAY_ENABLED
+  setupDisplay();
+  #endif
+  setupWiFi();
+  // Set the ESP32 as an access point
+  setupOTA();
+  server.begin();
+}
+
+void loop() {
+  // Handle client requests
+  server.handleClient();
+
+  #ifdef DISPLAY_ENABLED
+    displaySSID();
+  #endif
+
+    if (doublePressDetected) {
+        Serial.println("Doppeldruck erkannt!");
+        setBootPartitionToOTA0();
+        // Neustart, um von der neuen Partition zu booten
+        esp_restart();
+
+    }
+}