arduino based remote control for sure / wondom PGA2311 preamp module: http://store.sure-electronics.com/product/AA-AB41148
Before Building you have to import the sirferlsOLED library into the arduino IDE.
In the file define the two ports which are connected to the PGA2311-board remote connector.
#define PGA_CLK PORT2 #define PGA_DATA PORT3 Be sure to connect the GND-Pin as well.
I used this display in serial mode, some soldering need: https://secure.reichelt.at/display-oled-2x16-80x36mm-weiss-ea-w162-x3lw-p113317.html
There is a channel display as well, because I have a casing that came with a source switch.