add devices page, with Toon1 entry

content/devices/index.md

@@ -0,0 +1,44 @@
++++
+title = 'Devices'
+draft = false
++++
+
+While originally targeted at Toon 1, voorkant can run on other devices too.
+
+## Toon 1
+
+Specifications:
+
+ * SoC: MCIMX27LM0P4A with:
+ * CPU: ARM926EJ-S at 400 MHz
+ * 128 MB memory
+ * 128 MB flash, root file system 100MB, roughly 40MB free after rooting
+ * Ethernet, WiFi, Z-wave, USB port
+ * 800x480 display with touch, advertised as 32 bits per pixel by the framebuffer driver
+ * kernel version somewhere around 2.6.36-R10-h28
+ * `libc-2.21.so` with `GLIBC_` symbols `GLIBC_2.4` to `GLIBC_2.18`
+
+Based on the libc version, it turns out that binaries copied from Debian 8/armel tend to work, if they don't need too many libraries.
+
+To stop the stock software (this is non-permanent):
+
+```
+echo 'exit' > /tmp/etc-default-HCBv2
+killall qt-gui
+dd if=/dev/zero of=/dev/fb0 count=1000
+```
+
+(the `dd` is optional, but makes it clear that indeed the Toon software was stopped).
+
+Currently (April 2024), our libcurl build needs better random than `/dev/random` on this Linux build provides, so:
+
+```
+# cd /dev ; rm random ; mknod random c 1 9
+```
+
+This is also non-permanent.
+
+Please see [Installation](/install/) for credential setup.
+
+You may need to use `scp -O` to get your `client-lvgl` binary onto the system.
+Then, start it, and within a second or two, you should see our touch interface appear.

hugo.toml

@@ -28,6 +28,12 @@ name = "Screenshots"
 url = "/screenshots"
 weight = 30
 
+[[languages.en.menu.main]]
+identifier = "Devices"
+name = "Devices"
+url = "/devices"
+weight = 40
+
 [params.paige]
 site_title = "voorkant"
 site_description = "your non-web Home Assistant front-end"