added support for S32K148

s32/mcux/devices/S32K148/S32K148_features.h

@@ -0,0 +1,313 @@
+/*
+ * Copyright 2023-2024 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _S32K148_FEATURES_H_
+#define _S32K148_FEATURES_H_
+
+/* SOC module features */
+
+/* @brief ADC12 availability on the SoC. */
+#define FSL_FEATURE_SOC_ADC12_COUNT (2)
+/* @brief SYSMPU availability on the SoC. */
+#define FSL_FEATURE_SOC_SYSMPU_COUNT (1)
+/* @brief PORT availability on the SoC. */
+#define FSL_FEATURE_SOC_PORT_COUNT (5)
+/* @brief GPIO availability on the SoC. */
+#define FSL_FEATURE_SOC_GPIO_COUNT (5)
+/* @brief LPUART availability on the SoC. */
+#define FSL_FEATURE_SOC_LPUART_COUNT (3)
+/* @brief LPI2C availability on the SoC. */
+#define FSL_FEATURE_SOC_LPI2C_COUNT (2)
+/* @brief LPSPI availability on the SoC. */
+#define FSL_FEATURE_SOC_LPSPI_COUNT (3)
+/* @brief LMEM availability on the SoC. */
+#define FSL_FEATURE_SOC_LMEM_COUNT (1)
+/* @brief FTM availability on the SoC. */
+#define FSL_FEATURE_SOC_FTM_COUNT (8)
+/* @brief FLEXCAN availability on the SoC. */
+#define FSL_FEATURE_SOC_FLEXCAN_COUNT (3)
+/* @brief WDOG availability on the SoC. */
+#define FSL_FEATURE_SOC_WDOG_COUNT (1)
+/* @brief RTC availability on the SoC. */
+#define FSL_FEATURE_SOC_RTC_COUNT (1)
+
+/* SYSMPU module features */
+
+/* @brief Specifies number of descriptors available. */
+#define FSL_FEATURE_SYSMPU_DESCRIPTOR_COUNT (8)
+/* @brief Has process identifier support. */
+#define FSL_FEATURE_SYSMPU_HAS_PROCESS_IDENTIFIER (1)
+/* @brief Total number of MPU slave. */
+#define FSL_FEATURE_SYSMPU_SLAVE_COUNT (4)
+/* @brief Total number of MPU master. */
+#define FSL_FEATURE_SYSMPU_MASTER_COUNT (4)
+
+/* PORT module features */
+
+/* @brief Has control lock (register bit PCR[LK]). */
+#define FSL_FEATURE_PORT_HAS_PIN_CONTROL_LOCK (1)
+/* @brief Has open drain control (register bit PCR[ODE]). */
+#define FSL_FEATURE_PORT_HAS_OPEN_DRAIN (0)
+/* @brief Has digital filter (registers DFER, DFCR and DFWR). */
+#define FSL_FEATURE_PORT_HAS_DIGITAL_FILTER (1)
+/* @brief Has DMA request (register bit field PCR[IRQC] values). */
+#define FSL_FEATURE_PORT_HAS_DMA_REQUEST (1)
+/* @brief Has pull resistor selection available. */
+#define FSL_FEATURE_PORT_HAS_PULL_SELECTION (1)
+/* @brief Has pull resistor enable (register bit PCR[PE]). */
+#define FSL_FEATURE_PORT_HAS_PULL_ENABLE (1)
+/* @brief Has slew rate control (register bit PCR[SRE]). */
+#define FSL_FEATURE_PORT_HAS_SLEW_RATE (0)
+/* @brief Has passive filter (register bit field PCR[PFE]). */
+#define FSL_FEATURE_PORT_HAS_PASSIVE_FILTER (1)
+/* @brief Has drive strength control (register bit PCR[DSE]). */
+#define FSL_FEATURE_PORT_HAS_DRIVE_STRENGTH (1)
+/* @brief Has separate drive strength register (HDRVE). */
+#define FSL_FEATURE_PORT_HAS_DRIVE_STRENGTH_REGISTER (0)
+/* @brief Has glitch filter (register IOFLT). */
+#define FSL_FEATURE_PORT_HAS_GLITCH_FILTER (0)
+/* @brief Defines width of PCR[MUX] field. */
+#define FSL_FEATURE_PORT_PCR_MUX_WIDTH (3)
+/* @brief Has dedicated interrupt vector. */
+#define FSL_FEATURE_PORT_HAS_INTERRUPT_VECTOR (1)
+/* @brief Has multiple pin IRQ configuration (register GICLR and GICHR). */
+#define FSL_FEATURE_PORT_HAS_MULTIPLE_IRQ_CONFIG (1)
+/* @brief Defines whether PCR[IRQC] bit-field has flag states. */
+#define FSL_FEATURE_PORT_HAS_IRQC_FLAG (0)
+/* @brief Defines whether PCR[IRQC] bit-field has trigger states. */
+#define FSL_FEATURE_PORT_HAS_IRQC_TRIGGER (0)
+
+/* GPIO module features */
+
+/* @brief Has GPIO attribute checker register (GACR). */
+#define FSL_FEATURE_GPIO_HAS_ATTRIBUTE_CHECKER (0)
+
+/* LPUART module features */
+
+/* @brief Has receive FIFO overflow detection (bit field CFIFO[RXOFE]). */
+#define FSL_FEATURE_LPUART_HAS_IRQ_EXTENDED_FUNCTIONS (0)
+/* @brief Has low power features (can be enabled in wait mode via register bit C1[DOZEEN] or CTRL[DOZEEN] if the registers are 32-bit wide). */
+#define FSL_FEATURE_LPUART_HAS_LOW_POWER_UART_SUPPORT (1)
+/* @brief Has extended data register ED (or extra flags in the DATA register if the registers are 32-bit wide). */
+#define FSL_FEATURE_LPUART_HAS_EXTENDED_DATA_REGISTER_FLAGS (0)
+/* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */
+#define FSL_FEATURE_LPUART_HAS_FIFO (1)
+/* @brief Has 32-bit register MODIR */
+#define FSL_FEATURE_LPUART_HAS_MODIR (1)
+/* @brief Hardware flow control (RTS, CTS) is supported. */
+#define FSL_FEATURE_LPUART_HAS_MODEM_SUPPORT (1)
+/* @brief Infrared (modulation) is supported. */
+#define FSL_FEATURE_LPUART_HAS_IR_SUPPORT (1)
+/* @brief 2 bits long stop bit is available. */
+#define FSL_FEATURE_LPUART_HAS_STOP_BIT_CONFIG_SUPPORT (1)
+/* @brief If 10-bit mode is supported. */
+#define FSL_FEATURE_LPUART_HAS_10BIT_DATA_SUPPORT (1)
+/* @brief If 7-bit mode is supported. */
+#define FSL_FEATURE_LPUART_HAS_7BIT_DATA_SUPPORT (1)
+/* @brief Baud rate fine adjustment is available. */
+#define FSL_FEATURE_LPUART_HAS_BAUD_RATE_FINE_ADJUST_SUPPORT (0)
+/* @brief Baud rate oversampling is available (has bit fields C4[OSR], C5[BOTHEDGE], C5[RESYNCDIS] or BAUD[OSR], BAUD[BOTHEDGE], BAUD[RESYNCDIS] if the registers are 32-bit wide). */
+#define FSL_FEATURE_LPUART_HAS_BAUD_RATE_OVER_SAMPLING_SUPPORT (1)
+/* @brief Baud rate oversampling is available. */
+#define FSL_FEATURE_LPUART_HAS_RX_RESYNC_SUPPORT (1)
+/* @brief Baud rate oversampling is available. */
+#define FSL_FEATURE_LPUART_HAS_BOTH_EDGE_SAMPLING_SUPPORT (1)
+/* @brief Peripheral type. */
+#define FSL_FEATURE_LPUART_IS_SCI (1)
+/* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */
+#define FSL_FEATURE_LPUART_FIFO_SIZEn(x) (4)
+/* @brief Supports two match addresses to filter incoming frames. */
+#define FSL_FEATURE_LPUART_HAS_ADDRESS_MATCHING (1)
+/* @brief Has transmitter/receiver DMA enable bits C5[TDMAE]/C5[RDMAE] (or BAUD[TDMAE]/BAUD[RDMAE] if the registers are 32-bit wide). */
+#define FSL_FEATURE_LPUART_HAS_DMA_ENABLE (1)
+/* @brief Has transmitter/receiver DMA select bits C4[TDMAS]/C4[RDMAS], resp. C5[TDMAS]/C5[RDMAS] if IS_SCI = 0. */
+#define FSL_FEATURE_LPUART_HAS_DMA_SELECT (0)
+/* @brief Data character bit order selection is supported (bit field S2[MSBF] or STAT[MSBF] if the registers are 32-bit wide). */
+#define FSL_FEATURE_LPUART_HAS_BIT_ORDER_SELECT (1)
+/* @brief Has smart card (ISO7816 protocol) support and no improved smart card support. */
+#define FSL_FEATURE_LPUART_HAS_SMART_CARD_SUPPORT (0)
+/* @brief Has improved smart card (ISO7816 protocol) support. */
+#define FSL_FEATURE_LPUART_HAS_IMPROVED_SMART_CARD_SUPPORT (0)
+/* @brief Has local operation network (CEA709.1-B protocol) support. */
+#define FSL_FEATURE_LPUART_HAS_LOCAL_OPERATION_NETWORK_SUPPORT (0)
+/* @brief Has 32-bit registers (BAUD, STAT, CTRL, DATA, MATCH, MODIR) instead of 8-bit (BDH, BDL, C1, S1, D, etc.). */
+#define FSL_FEATURE_LPUART_HAS_32BIT_REGISTERS (1)
+/* @brief Lin break detect available (has bit BAUD[LBKDIE]). */
+#define FSL_FEATURE_LPUART_HAS_LIN_BREAK_DETECT (1)
+/* @brief UART stops in Wait mode available (has bit C1[UARTSWAI]). */
+#define FSL_FEATURE_LPUART_HAS_WAIT_MODE_OPERATION (0)
+/* @brief Has separate DMA RX and TX requests. */
+#define FSL_FEATURE_LPUART_HAS_SEPARATE_DMA_RX_TX_REQn(x) (0)
+/* @brief Has separate RX and TX interrupts. */
+#define FSL_FEATURE_LPUART_HAS_SEPARATE_RX_TX_IRQ (0)
+/* @brief Has LPAURT_PARAM. */
+#define FSL_FEATURE_LPUART_HAS_PARAM (1)
+/* @brief Has LPUART_VERID. */
+#define FSL_FEATURE_LPUART_HAS_VERID (1)
+/* @brief Has LPUART_GLOBAL. */
+#define FSL_FEATURE_LPUART_HAS_GLOBAL (1)
+/* @brief Has LPUART_PINCFG. */
+#define FSL_FEATURE_LPUART_HAS_PINCFG (1)
+
+/* LPI2C module features */
+
+/* @brief Has separate DMA RX and TX requests. */
+#define FSL_FEATURE_LPI2C_HAS_SEPARATE_DMA_RX_TX_REQn(x) (1)
+/* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */
+#define FSL_FEATURE_LPI2C_FIFO_SIZEn(x) (4)
+
+/* LPSPI module features */
+
+/* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */
+#define FSL_FEATURE_LPSPI_FIFO_SIZEn(x) (4)
+/* @brief Has separate DMA RX and TX requests. */
+#define FSL_FEATURE_LPSPI_HAS_SEPARATE_DMA_RX_TX_REQn(x) (1)
+/* @brief Has CCR1 (related to existence of registers CCR1). */
+#define FSL_FEATURE_LPSPI_HAS_CCR1 (0)
+
+/* LMEM module features */
+
+/* @brief Has process identifier support. */
+#define FSL_FEATURE_LMEM_HAS_SYSTEMBUS_CACHE (0)
+/* @brief Has L1 cache. */
+#define FSL_FEATURE_HAS_L1CACHE (1)
+/* @brief L1 ICACHE line size in byte. */
+#define FSL_FEATURE_L1ICACHE_LINESIZE_BYTE (16)
+/* @brief L1 DCACHE line size in byte. */
+#define FSL_FEATURE_L1DCACHE_LINESIZE_BYTE (16)
+
+/* FTM module features */
+
+/* @brief Number of channels. */
+#define FSL_FEATURE_FTM_CHANNEL_COUNTn(x) (8)
+/* @brief Has counter reset by the selected input capture event (register bits C0SC[ICRST], C1SC[ICRST], ...). */
+#define FSL_FEATURE_FTM_HAS_COUNTER_RESET_BY_CAPTURE_EVENT (1)
+/* @brief Has extended deadtime value. */
+#define FSL_FEATURE_FTM_HAS_EXTENDED_DEADTIME_VALUE (1)
+/* @brief Enable pwm output for the module. */
+#define FSL_FEATURE_FTM_HAS_ENABLE_PWM_OUTPUT (1)
+/* @brief Has half-cycle reload for the module. */
+#define FSL_FEATURE_FTM_HAS_HALFCYCLE_RELOAD (1)
+/* @brief Has reload interrupt. */
+#define FSL_FEATURE_FTM_HAS_RELOAD_INTERRUPT (1)
+/* @brief Has reload initialization trigger. */
+#define FSL_FEATURE_FTM_HAS_RELOAD_INITIALIZATION_TRIGGER (1)
+/* @brief Has DMA support, bitfield CnSC[DMA]. */
+#define FSL_FEATURE_FTM_HAS_DMA_SUPPORT (1)
+/* @brief If channel 6 is used to generate channel trigger, bitfield EXTTRIG[CH6TRIG]. */
+#define FSL_FEATURE_FTM_HAS_CHANNEL6_TRIGGER (1)
+/* @brief If channel 7 is used to generate channel trigger, bitfield EXTTRIG[CH7TRIG]. */
+#define FSL_FEATURE_FTM_HAS_CHANNEL7_TRIGGER (1)
+/* @brief If instance has only TPM function. */
+#define FSL_FEATURE_FTM_IS_TPM_ONLY_INSTANCEn(x) (0)
+/* @brief Has frequency of the reload opportunities, bitfield CONF[LDFQ]. */
+#define FSL_FEATURE_FTM_HAS_CONF_LDFQ_BIT (1)
+
+/* FLEXCAN module features */
+
+/* @brief Message buffer size */
+#define FSL_FEATURE_FLEXCAN_HAS_MESSAGE_BUFFER_MAX_NUMBERn(x) \
+    (((x) == CAN0) ? (32) : \
+    (((x) == CAN1) ? (32) : \
+    (((x) == CAN2) ? (32) : (-1))))
+/* @brief Has doze mode support (register bit field MCR[DOZE]). */
+#define FSL_FEATURE_FLEXCAN_HAS_DOZE_MODE_SUPPORT (0)
+/* @brief Insatnce has doze mode support (register bit field MCR[DOZE]). */
+#define FSL_FEATURE_FLEXCAN_INSTANCE_HAS_DOZE_MODE_SUPPORTn(x) (0)
+/* @brief Has a glitch filter on the receive pin (register bit field MCR[WAKSRC]). */
+#define FSL_FEATURE_FLEXCAN_HAS_GLITCH_FILTER (0)
+/* @brief Has extended interrupt mask and flag register (register IMASK2, IFLAG2). */
+#define FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER (0)
+/* @brief Instance has extended bit timing register (register CBT). */
+#define FSL_FEATURE_FLEXCAN_INSTANCE_HAS_EXTENDED_TIMING_REGISTERn(x) (1)
+/* @brief Has a receive FIFO DMA feature (register bit field MCR[DMA]). */
+#define FSL_FEATURE_FLEXCAN_HAS_RX_FIFO_DMA (1)
+/* @brief Instance has a receive FIFO DMA feature (register bit field MCR[DMA]). */
+#define FSL_FEATURE_FLEXCAN_INSTANCE_HAS_RX_FIFO_DMAn(x) (1)
+/* @brief Remove CAN Engine Clock Source Selection from unsupported part. */
+#define FSL_FEATURE_FLEXCAN_SUPPORT_ENGINE_CLK_SEL_REMOVE (0)
+/* @brief Instance remove CAN Engine Clock Source Selection from unsupported part. */
+#define FSL_FEATURE_FLEXCAN_INSTANCE_SUPPORT_ENGINE_CLK_SEL_REMOVEn(x) (0)
+/* @brief Has CAN with Flexible Data rate (CAN FD) protocol. */
+#define FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE (1)
+/* @brief CAN instance support Flexible Data rate (CAN FD) protocol. */
+#define FSL_FEATURE_FLEXCAN_INSTANCE_HAS_FLEXIBLE_DATA_RATEn(x) \
+    (((x) == CAN0) ? (1) : \
+    (((x) == CAN1) ? (1) : \
+    (((x) == CAN2) ? (1) : (0))))
+/* @brief Has memory error control (register MECR). */
+#define FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL (0)
+/* @brief Has enhanced bit timing register (register EPRS, ENCBT, EDCBT and ETDC). */
+#define FSL_FEATURE_FLEXCAN_HAS_ENHANCED_BIT_TIMING_REG (0)
+/* @brief Has Pretended Networking mode support. */
+#define FSL_FEATURE_FLEXCAN_HAS_PN_MODE (0)
+/* @brief Has Enhanced Rx FIFO. */
+#define FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO (0)
+/* @brief Does not support Supervisor Mode (bitfield MCR[SUPV]. */
+#define FSL_FEATURE_FLEXCAN_HAS_NO_SUPV_SUPPORT (0)
+
+/* WDOG module features */
+
+/* @brief Watchdog is available. */
+#define FSL_FEATURE_WDOG_HAS_WATCHDOG (1)
+/* @brief WDOG_CNT can be 32-bit written. */
+#define FSL_FEATURE_WDOG_HAS_32BIT_ACCESS (1)
+
+/* RTC module features */
+
+/* @brief Has wakeup pin. */
+#define FSL_FEATURE_RTC_HAS_WAKEUP_PIN (0)
+/* @brief Has wakeup pin selection (bit field CR[WPS]). */
+#define FSL_FEATURE_RTC_HAS_WAKEUP_PIN_SELECTION (0)
+/* @brief Has low power features (registers MER, MCLR and MCHR). */
+#define FSL_FEATURE_RTC_HAS_MONOTONIC (0)
+/* @brief Has read/write access control (registers WAR and RAR). */
+#define FSL_FEATURE_RTC_HAS_ACCESS_CONTROL (0)
+/* @brief Has security features (registers TTSR, MER, MCLR and MCHR). */
+#define FSL_FEATURE_RTC_HAS_SECURITY (0)
+/* @brief Has RTC_CLKIN available. */
+#define FSL_FEATURE_RTC_HAS_RTC_CLKIN (1)
+/* @brief Has prescaler adjust for LPO. */
+#define FSL_FEATURE_RTC_HAS_LPO_ADJUST (1)
+/* @brief Has Clock Pin Enable field. */
+#define FSL_FEATURE_RTC_HAS_CPE (1)
+/* @brief Has Timer Seconds Interrupt Configuration field. */
+#define FSL_FEATURE_RTC_HAS_TSIC (1)
+/* @brief Has OSC capacitor setting RTC_CR[SC2P ~ SC16P] */
+#define FSL_FEATURE_RTC_HAS_OSC_SCXP (0)
+/* @brief Has Tamper Interrupt Register (register TIR). */
+#define FSL_FEATURE_RTC_HAS_TIR (0)
+/* @brief Has Tamper Pin Interrupt Enable (bitfield TIR[TPIE]). */
+#define FSL_FEATURE_RTC_HAS_TIR_TPIE (0)
+/* @brief Has Security Interrupt Enable (bitfield TIR[SIE]). */
+#define FSL_FEATURE_RTC_HAS_TIR_SIE (0)
+/* @brief Has Loss of Clock Interrupt Enable (bitfield TIR[LCIE]). */
+#define FSL_FEATURE_RTC_HAS_TIR_LCIE (0)
+/* @brief Has Tamper Interrupt Detect Flag (bitfield SR[TIDF]). */
+#define FSL_FEATURE_RTC_HAS_SR_TIDF (0)
+/* @brief Has Tamper Detect Register (register TDR). */
+#define FSL_FEATURE_RTC_HAS_TDR (0)
+/* @brief Has Tamper Pin Flag (bitfield TDR[TPF]). */
+#define FSL_FEATURE_RTC_HAS_TDR_TPF (0)
+/* @brief Has Security Tamper Flag (bitfield TDR[STF]). */
+#define FSL_FEATURE_RTC_HAS_TDR_STF (0)
+/* @brief Has Loss of Clock Tamper Flag (bitfield TDR[LCTF]). */
+#define FSL_FEATURE_RTC_HAS_TDR_LCTF (0)
+/* @brief Has Tamper Time Seconds Register (register TTSR). */
+#define FSL_FEATURE_RTC_HAS_TTSR (0)
+/* @brief Has Pin Configuration Register (register PCR). */
+#define FSL_FEATURE_RTC_HAS_PCR (0)
+/* @brief Has Oscillator Enable(bitfield CR[OSCE]). */
+#define FSL_FEATURE_RTC_HAS_NO_CR_OSCE (1)
+
+/* ADC12 module features */
+
+/* @brief Has DMA support (bit SC2[DMAEN]. */
+#define FSL_FEATURE_ADC12_HAS_DMA_SUPPORT (1)
+/* @brief Conversion control count (related to number of registers SC1n and Rn). */
+#define FSL_FEATURE_ADC12_CONVERSION_CONTROL_COUNT (24)
+
+#endif /* _S32K148_FEATURES_H_ */

s32/mcux/devices/S32K148/device_CMSIS.cmake

@@ -0,0 +1,12 @@
+include_guard(GLOBAL)
+message("device_CMSIS component is included.")
+
+target_sources(${MCUX_SDK_PROJECT_NAME} PRIVATE
+  # nothing to build
+)
+
+target_include_directories(${MCUX_SDK_PROJECT_NAME} PUBLIC
+  ${CMAKE_CURRENT_LIST_DIR}/.
+)
+
+include(CMSIS_Include_core_cm)

s32/mcux/devices/S32K148/device_system.cmake

@@ -0,0 +1,10 @@
+include_guard(GLOBAL)
+message("device_system component is included.")
+
+target_sources(${MCUX_SDK_PROJECT_NAME} PRIVATE
+  # nothing to build
+)
+
+target_include_directories(${MCUX_SDK_PROJECT_NAME} PUBLIC
+  # nothing to include
+)

s32/mcux/devices/S32K148/drivers/driver_memory.cmake

@@ -0,0 +1,10 @@
+include_guard(GLOBAL)
+message("driver_memory component is included.")
+
+target_sources(${MCUX_SDK_PROJECT_NAME} PRIVATE
+  # nothing to build
+)
+
+target_include_directories(${MCUX_SDK_PROJECT_NAME} PUBLIC
+  ${CMAKE_CURRENT_LIST_DIR}/.
+)

s32/mcux/devices/S32K148/drivers/driver_reset.cmake

@@ -0,0 +1,10 @@
+include_guard(GLOBAL)
+message("driver_reset component is included.")
+
+target_sources(${MCUX_SDK_PROJECT_NAME} PRIVATE
+  # nothing to build
+)
+
+target_include_directories(${MCUX_SDK_PROJECT_NAME} PUBLIC
+  ${CMAKE_CURRENT_LIST_DIR}/.
+)

s32/mcux/devices/S32K148/drivers/fsl_clock.h

@@ -0,0 +1,12 @@
+/*
+ * Copyright 2023 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _FSL_CLOCK_H_
+#define _FSL_CLOCK_H_
+
+#include "fsl_common.h"
+
+#endif /* _FSL_CLOCK_H_ */